git.sur5r.net Git - u-boot/blob - include/configs/zipitz2.h

   1 /*
   2  * Aeronix Zipit Z2 configuration file
   3  *
   4  * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Board Configuration Options
  14  */
  15 #define CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
  16 #define CONFIG_SYS_TEXT_BASE            0x0
  17
  18 #undef  CONFIG_BOARD_LATE_INIT
  19 #undef  CONFIG_SKIP_LOWLEVEL_INIT
  20 #define CONFIG_PREBOOT
  21
  22 /*
  23  * Environment settings
  24  */
  25 #define CONFIG_ENV_OVERWRITE
  26 #define CONFIG_ENV_IS_IN_FLASH          1
  27 #define CONFIG_ENV_ADDR                 0x40000
  28 #define CONFIG_ENV_SIZE                 0x10000
  29
  30 #define CONFIG_SYS_DCACHE_OFF
  31
  32 #define CONFIG_SYS_MALLOC_LEN           (128*1024)
  33 #define CONFIG_ARCH_CPU_INIT
  34
  35 #define CONFIG_BOOTCOMMAND                                              \
  36         "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
  37         "then "                                                         \
  38                 "source 0xa0000000; "                                   \
  39         "else "                                                         \
  40                 "bootm 0x50000; "                                       \
  41         "fi; "
  42 #define CONFIG_BOOTARGS                                                 \
  43         "console=tty0 console=ttyS2,115200 fbcon=rotate:3"
  44 #define CONFIG_TIMESTAMP
  45 #define CONFIG_BOOTDELAY                2       /* Autoboot delay */
  46 #define CONFIG_CMDLINE_TAG
  47 #define CONFIG_SETUP_MEMORY_TAGS
  48 #define CONFIG_SYS_TEXT_BASE            0x0
  49 #define CONFIG_LZMA                     /* LZMA compression support */
  50 #define CONFIG_OF_LIBFDT
  51
  52 /*
  53  * Serial Console Configuration
  54  * STUART - the lower serial port on Colibri board
  55  */
  56 #define CONFIG_PXA_SERIAL
  57 #define CONFIG_STUART                   1
  58 #define CONFIG_CONS_INDEX               2
  59 #define CONFIG_BAUDRATE                 115200
  60
  61 /*
  62  * Bootloader Components Configuration
  63  */
  64 #define CONFIG_CMD_ENV
  65 #define CONFIG_CMD_MMC
  66 #define CONFIG_CMD_SPI
  67 #define CONFIG_CMD_USB
  68
  69 /*
  70  * MMC Card Configuration
  71  */
  72 #ifdef  CONFIG_CMD_MMC
  73 #define CONFIG_MMC
  74 #define CONFIG_GENERIC_MMC
  75 #define CONFIG_PXA_MMC_GENERIC
  76 #define CONFIG_SYS_MMC_BASE             0xF0000000
  77 #define CONFIG_CMD_FAT
  78 #define CONFIG_CMD_EXT2
  79 #define CONFIG_DOS_PARTITION
  80 #endif
  81
  82 /*
  83  * SPI and LCD
  84  */
  85 #ifdef  CONFIG_CMD_SPI
  86 #define CONFIG_SOFT_SPI
  87 #define CONFIG_LCD
  88 #define CONFIG_LCD_ROTATION
  89 #define CONFIG_PXA_LCD
  90 #define CONFIG_LMS283GF05
  91
  92 #define SPI_DELAY       udelay(10)
  93 #define SPI_SDA(val)    zipitz2_spi_sda(val)
  94 #define SPI_SCL(val)    zipitz2_spi_scl(val)
  95 #define SPI_READ        zipitz2_spi_read()
  96 #ifndef __ASSEMBLY__
  97 void zipitz2_spi_sda(int);
  98 void zipitz2_spi_scl(int);
  99 unsigned char zipitz2_spi_read(void);
 100 #endif
 101 #endif
 102
 103 /*
 104  * HUSH Shell Configuration
 105  */
 106 #define CONFIG_SYS_HUSH_PARSER          1
 107
 108 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
 109 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
 110 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
 111 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 112 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 113 #define CONFIG_SYS_DEVICE_NULLDEV       1
 114
 115 /*
 116  * Clock Configuration
 117  */
 118 #define CONFIG_SYS_CPUSPEED             0x190           /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
 119
 120 /*
 121  * SRAM Map
 122  */
 123 #define PHYS_SRAM                       0x5c000000      /* SRAM Bank #1 */
 124 #define PHYS_SRAM_SIZE                  0x00040000      /* 256k */
 125
 126 /*
 127  * DRAM Map
 128  */
 129 #define CONFIG_NR_DRAM_BANKS            1               /* We have 1 bank of DRAM */
 130 #define PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
 131 #define PHYS_SDRAM_1_SIZE               0x02000000      /* 32 MB */
 132
 133 #define CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
 134 #define CONFIG_SYS_DRAM_SIZE            0x02000000      /* 32 MB DRAM */
 135
 136 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on */
 137 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM */
 138
 139 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
 140
 141 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 142 #define CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
 143
 144 /*
 145  * NOR FLASH
 146  */
 147 #define PHYS_FLASH_1                    0x00000000      /* Flash Bank #1 */
 148 #define PHYS_FLASH_SIZE                 0x00800000      /* 8 MB */
 149 #define PHYS_FLASH_SECT_SIZE            0x00010000      /* 64 KB sectors */
 150 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 151
 152 #define CONFIG_SYS_FLASH_CFI
 153 #define CONFIG_FLASH_CFI_DRIVER         1
 154 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 155
 156 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 157 #define CONFIG_SYS_MONITOR_LEN          PHYS_FLASH_SECT_SIZE
 158
 159 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 160 #define CONFIG_SYS_MAX_FLASH_SECT       256
 161
 162 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 163
 164 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 165 #define CONFIG_SYS_FLASH_WRITE_TOUT     240000
 166 #define CONFIG_SYS_FLASH_LOCK_TOUT      240000
 167 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    240000
 168 #define CONFIG_SYS_FLASH_PROTECTION
 169
 170 /*
 171  * GPIO settings
 172  */
 173 #define CONFIG_SYS_GAFR0_L_VAL  0x02000140
 174 #define CONFIG_SYS_GAFR0_U_VAL  0x59188000
 175 #define CONFIG_SYS_GAFR1_L_VAL  0x63900002
 176 #define CONFIG_SYS_GAFR1_U_VAL  0xaaa03950
 177 #define CONFIG_SYS_GAFR2_L_VAL  0x0aaaaaaa
 178 #define CONFIG_SYS_GAFR2_U_VAL  0x29000308
 179 #define CONFIG_SYS_GAFR3_L_VAL  0x54000000
 180 #define CONFIG_SYS_GAFR3_U_VAL  0x000000d5
 181 #define CONFIG_SYS_GPCR0_VAL    0x00000000
 182 #define CONFIG_SYS_GPCR1_VAL    0x00000020
 183 #define CONFIG_SYS_GPCR2_VAL    0x00000000
 184 #define CONFIG_SYS_GPCR3_VAL    0x00000000
 185 #define CONFIG_SYS_GPDR0_VAL    0xdafcee00
 186 #define CONFIG_SYS_GPDR1_VAL    0xffa3aaab
 187 #define CONFIG_SYS_GPDR2_VAL    0x8fe9ffff
 188 #define CONFIG_SYS_GPDR3_VAL    0x001b1f8a
 189 #define CONFIG_SYS_GPSR0_VAL    0x06080400
 190 #define CONFIG_SYS_GPSR1_VAL    0x007f0000
 191 #define CONFIG_SYS_GPSR2_VAL    0x032a0000
 192 #define CONFIG_SYS_GPSR3_VAL    0x00000180
 193
 194 #define CONFIG_SYS_PSSR_VAL     0x30
 195
 196 /*
 197  * Clock settings
 198  */
 199 #define CONFIG_SYS_CKEN         0x00511220
 200 #define CONFIG_SYS_CCCR         0x00000190
 201
 202 /*
 203  * Memory settings
 204  */
 205 #define CONFIG_SYS_MSC0_VAL     0x2ffc38f8
 206 #define CONFIG_SYS_MSC1_VAL     0x0000ccd1
 207 #define CONFIG_SYS_MSC2_VAL     0x0000b884
 208 #define CONFIG_SYS_MDCNFG_VAL   0x08000ba9
 209 #define CONFIG_SYS_MDREFR_VAL   0x2011a01e
 210 #define CONFIG_SYS_MDMRS_VAL    0x00000000
 211 #define CONFIG_SYS_FLYCNFG_VAL  0x00010001
 212 #define CONFIG_SYS_SXCNFG_VAL   0x40044004
 213
 214 /*
 215  * PCMCIA and CF Interfaces
 216  */
 217 #define CONFIG_SYS_MECR_VAL     0x00000001
 218 #define CONFIG_SYS_MCMEM0_VAL   0x00014307
 219 #define CONFIG_SYS_MCMEM1_VAL   0x00014307
 220 #define CONFIG_SYS_MCATT0_VAL   0x0001c787
 221 #define CONFIG_SYS_MCATT1_VAL   0x0001c787
 222 #define CONFIG_SYS_MCIO0_VAL    0x0001430f
 223 #define CONFIG_SYS_MCIO1_VAL    0x0001430f
 224
 225 #include "pxa-common.h"
 226
 227 #endif  /* __CONFIG_H */