2 * (C) Copyright 2000-2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
33 #if (CONFIG_COMMANDS & CFG_CMD_IDE)
36 #if (CONFIG_COMMANDS & CFG_CMD_SCSI)
39 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
42 #ifdef CONFIG_STATUS_LED
43 #include <status_led.h>
46 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
47 #include <cmd_bedbug.h>
49 #ifdef CFG_ALLOC_DPRAM
53 #if defined(CONFIG_BAB7xx)
57 #if defined(CONFIG_POST)
60 #if defined(CONFIG_LOGBUFFER)
64 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
67 #if defined(CONFIG_HARD_I2C) || \
68 defined(CONFIG_SOFT_I2C)
72 static char *failed = "*** failed ***\n";
74 #if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
75 extern flash_info_t flash_info[];
78 #include <environment.h>
80 #if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
81 (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
82 defined(CFG_ENV_IS_IN_NVRAM)
83 #define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
85 #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
89 * Begin and End of memory area for malloc(), and current "brk"
91 static ulong mem_malloc_start = 0;
92 static ulong mem_malloc_end = 0;
93 static ulong mem_malloc_brk = 0;
95 /************************************************************************
97 ************************************************************************
101 * The Malloc area is immediately below the monitor copy in DRAM
103 static void mem_malloc_init (void)
105 DECLARE_GLOBAL_DATA_PTR;
107 ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
109 mem_malloc_end = dest_addr;
110 mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
111 mem_malloc_brk = mem_malloc_start;
113 memset ((void *) mem_malloc_start,
115 mem_malloc_end - mem_malloc_start);
118 void *sbrk (ptrdiff_t increment)
120 ulong old = mem_malloc_brk;
121 ulong new = old + increment;
123 if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
126 mem_malloc_brk = new;
127 return ((void *) old);
130 char *strmhz (char *buf, long hz)
136 l = sprintf (buf, "%ld", n);
137 m = (hz % 1000000L) / 1000L;
139 sprintf (buf + l, ".%03ld", m);
143 static void syscalls_init (void)
147 syscall_tbl[SYSCALL_MALLOC] = (void *) malloc;
148 syscall_tbl[SYSCALL_FREE] = (void *) free;
150 syscall_tbl[SYSCALL_INSTALL_HDLR] = (void *) irq_install_handler;
151 syscall_tbl[SYSCALL_FREE_HDLR] = (void *) irq_free_handler;
152 syscall_tbl[SYSCALL_GET_TIMER] = (void *)get_timer;
153 syscall_tbl[SYSCALL_UDELAY] = (void *)udelay;
155 addr = (ulong *) 0xc00; /* syscall ISR addr */
158 *addr++ |= (ulong) syscall_tbl >> 16;
159 *addr++ |= (ulong) syscall_tbl & 0xFFFF;
160 *addr++ |= NR_SYSCALLS >> 16;
161 *addr++ |= NR_SYSCALLS & 0xFFFF;
163 flush_cache (0x0C00, 0x10);
165 /* Initialize syscalls stack pointer */
166 addr = (ulong *) 0xCFC;
168 flush_cache ((ulong)addr, 0x10);
172 * All attempts to come up with a "common" initialization sequence
173 * that works for all boards and architectures failed: some of the
174 * requirements are just _too_ different. To get rid of the resulting
175 * mess of board dependend #ifdef'ed code we now make the whole
176 * initialization sequence configurable to the user.
178 * The requirements for any new initalization function is simple: it
179 * receives a pointer to the "global data" structure as it's only
180 * argument, and returns an integer return code, where 0 means
181 * "continue" and != 0 means "fatal error, hang the system".
183 typedef int (init_fnc_t) (void);
185 /************************************************************************
187 ************************************************************************
188 * Some of this code should be moved into the core functions,
189 * but let's get it working (again) first...
192 static int init_baudrate (void)
194 DECLARE_GLOBAL_DATA_PTR;
196 uchar tmp[64]; /* long enough for environment variables */
197 int i = getenv_r ("baudrate", tmp, sizeof (tmp));
199 gd->baudrate = (i > 0)
200 ? (int) simple_strtoul (tmp, NULL, 10)
206 /***********************************************************************/
208 static int init_func_ram (void)
210 DECLARE_GLOBAL_DATA_PTR;
212 #ifdef CONFIG_BOARD_TYPES
213 int board_type = gd->board_type;
215 int board_type = 0; /* use dummy arg */
219 if ((gd->ram_size = initdram (board_type)) > 0) {
220 print_size (gd->ram_size, "\n");
227 /***********************************************************************/
229 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
230 static int init_func_i2c (void)
233 i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
239 /***********************************************************************/
241 #if defined(CONFIG_WATCHDOG)
242 static int init_func_watchdog_init (void)
244 puts (" Watchdog enabled\n");
248 # define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
250 static int init_func_watchdog_reset (void)
255 # define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
257 # define INIT_FUNC_WATCHDOG_INIT /* undef */
258 # define INIT_FUNC_WATCHDOG_RESET /* undef */
259 #endif /* CONFIG_WATCHDOG */
261 /************************************************************************
262 * Initialization sequence *
263 ************************************************************************
266 init_fnc_t *init_sequence[] = {
268 #if defined(CONFIG_BOARD_PRE_INIT)
269 board_pre_init, /* very early board init code (fpga boot, etc.) */
272 get_clocks, /* get CPU and bus clocks (etc.) */
274 #ifdef CFG_ALLOC_DPRAM
277 #if defined(CONFIG_BOARD_POSTCLK_INIT)
285 #if defined(CONFIG_8260)
288 #endif /* CONFIG_8260 */
291 INIT_FUNC_WATCHDOG_INIT
292 #if defined(CONFIG_BMW) || \
293 defined(CONFIG_COGENT) || \
294 defined(CONFIG_HYMOD) || \
295 defined(CONFIG_RSD_PROTO) || \
299 INIT_FUNC_WATCHDOG_RESET
300 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
303 #if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
306 INIT_FUNC_WATCHDOG_RESET
308 #if defined(CFG_DRAM_TEST)
310 #endif /* CFG_DRAM_TEST */
311 INIT_FUNC_WATCHDOG_RESET
313 NULL, /* Terminate this list */
316 /************************************************************************
318 * This is the first part of the initialization sequence that is
319 * implemented in C, but still running from ROM.
321 * The main purpose is to provide a (serial) console interface as
322 * soon as possible (so we can see any error messages), and to
323 * initialize the RAM so that we can relocate the monitor code to
326 * Be aware of the restrictions: global data is read-only, BSS is not
327 * initialized, and stack space is limited to a few kB.
329 ************************************************************************
332 void board_init_f (ulong bootflag)
334 DECLARE_GLOBAL_DATA_PTR;
337 ulong len, addr, addr_sp;
339 init_fnc_t **init_fnc_ptr;
343 uchar tmp[64]; /* long enough for environment variables */
346 /* Pointer is writable since we allocated a register for it */
347 gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
350 /* Clear initial global data */
351 memset ((void *) gd, 0, sizeof (gd_t));
354 for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
355 if ((*init_fnc_ptr) () != 0) {
361 * Now that we have DRAM mapped and working, we can
362 * relocate the code and continue running from DRAM.
364 * Reserve memory at end of RAM for (top down in that order):
365 * - kernel log buffer
369 * - board info struct
371 len = get_endaddr () - CFG_MONITOR_BASE;
373 if (len > CFG_MONITOR_LEN) {
374 printf ("*** U-Boot size %ld > reserved memory (%d)\n",
375 len, CFG_MONITOR_LEN);
379 if (CFG_MONITOR_LEN > len)
380 len = CFG_MONITOR_LEN;
382 #ifndef CONFIG_VERY_BIG_RAM
383 addr = CFG_SDRAM_BASE + gd->ram_size;
385 /* only allow stack below 256M */
386 addr = CFG_SDRAM_BASE +
387 (gd->ram_size > 256 << 20) ? 256 << 20 : gd->ram_size;
390 #ifdef CONFIG_LOGBUFFER
391 /* reserve kernel log buffer */
392 addr -= (LOGBUFF_RESERVE);
394 printf ("Reserving %ldk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
400 * reserve protected RAM
402 i = getenv_r ("pram", tmp, sizeof (tmp));
403 reg = (i > 0) ? simple_strtoul (tmp, NULL, 10) : CONFIG_PRAM;
404 addr -= (reg << 10); /* size is in kB */
406 printf ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
408 #endif /* CONFIG_PRAM */
410 /* round down to next 4 kB limit */
413 printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
417 /* reserve memory for LCD display (always full pages) */
418 addr = lcd_setmem (addr);
420 #endif /* CONFIG_LCD */
422 #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
423 /* reserve memory for video display (always full pages) */
424 addr = video_setmem (addr);
426 #endif /* CONFIG_VIDEO */
429 * reserve memory for U-Boot code, data & bss
430 * round down to next 4 kB limit
436 printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
439 #ifdef CONFIG_AMIGAONEG3SE
440 gd->relocaddr = addr;
444 * reserve memory for malloc() arena
446 addr_sp = addr - TOTAL_MALLOC_LEN;
448 printf ("Reserving %dk for malloc() at: %08lx\n",
449 TOTAL_MALLOC_LEN >> 10, addr_sp);
453 * (permanently) allocate a Board Info struct
454 * and a permanent copy of the "global" data
456 addr_sp -= sizeof (bd_t);
457 bd = (bd_t *) addr_sp;
460 printf ("Reserving %d Bytes for Board Info at: %08lx\n",
461 sizeof (bd_t), addr_sp);
463 addr_sp -= sizeof (gd_t);
464 id = (gd_t *) addr_sp;
466 printf ("Reserving %d Bytes for Global Data at: %08lx\n",
467 sizeof (gd_t), addr_sp);
471 * Finally, we set up a new (bigger) stack.
473 * Leave some safety gap for SP, force alignment on 16 byte boundary
474 * Clear initial stack frame
478 *((ulong *) addr_sp)-- = 0;
479 *((ulong *) addr_sp)-- = 0;
481 printf ("Stack Pointer at: %08lx\n", addr_sp);
485 * Save local variables to board info struct
488 bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
489 bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
492 bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
493 bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
495 bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
496 bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
499 #if defined(CONFIG_8xx) || defined(CONFIG_8260)
500 bd->bi_immr_base = CFG_IMMR; /* base of IMMR register */
503 bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
506 bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
507 bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
508 #if defined(CONFIG_8260)
509 bd->bi_cpmfreq = gd->cpm_clk;
510 bd->bi_brgfreq = gd->brg_clk;
511 bd->bi_sccfreq = gd->scc_clk;
512 bd->bi_vco = gd->vco_out;
513 #endif /* CONFIG_8260 */
515 bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
518 strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
519 strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
521 bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
522 bd->bi_plb_busfreq = gd->bus_clk;
524 bd->bi_pci_busfreq = get_PCI_freq ();
529 printf ("New Stack Pointer is: %08lx\n", addr_sp);
535 post_bootmode_init();
536 post_run (NULL, POST_ROM | post_bootmode_get(0));
541 memcpy (id, gd, sizeof (gd_t));
543 relocate_code (addr_sp, id, addr);
545 /* NOTREACHED - relocate_code() does not return */
549 /************************************************************************
551 * This is the next part if the initialization sequence: we are now
552 * running from RAM and have a "normal" C environment, i. e. global
553 * data can be written, BSS has been cleared, the stack size in not
554 * that critical any more, etc.
556 ************************************************************************
559 void board_init_r (gd_t *id, ulong dest_addr)
561 DECLARE_GLOBAL_DATA_PTR;
567 extern void malloc_bin_reloc (void);
568 #ifndef CFG_ENV_IS_NOWHERE
569 extern char * env_name_spec;
576 gd = id; /* initialize RAM version of global data */
579 gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
582 printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
587 gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
590 * We have to relocate the command table manually
592 for (cmdtp = &cmd_tbl[0]; cmdtp->name; cmdtp++) {
595 addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
597 printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
598 cmdtp->name, (ulong) (cmdtp->cmd), addr);
601 (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
603 addr = (ulong)(cmdtp->name) + gd->reloc_off;
604 cmdtp->name = (char *)addr;
607 addr = (ulong)(cmdtp->usage) + gd->reloc_off;
608 cmdtp->usage = (char *)addr;
612 addr = (ulong)(cmdtp->help) + gd->reloc_off;
613 cmdtp->help = (char *)addr;
617 /* there are some other pointer constants we must deal with */
618 #ifndef CFG_ENV_IS_NOWHERE
619 env_name_spec += gd->reloc_off;
624 #ifdef CONFIG_LOGBUFFER
625 logbuff_init_ptrs ();
628 post_output_backlog ();
634 #if defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || defined (CONFIG_FLAGADM)
635 icache_enable (); /* it's time to enable the instruction cache */
638 #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
640 * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
641 * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
646 #if defined(CONFIG_BAB7xx)
648 * Initialise the ISA bridge
650 initialise_w83c553f ();
653 asm ("sync ; isync");
656 * Setup trap handlers
658 trap_init (dest_addr);
660 #if !defined(CFG_NO_FLASH)
663 if ((flash_size = flash_init ()) > 0) {
664 #ifdef CFG_FLASH_CHECKSUM
665 print_size (flash_size, "");
667 * Compute and print flash CRC if flashchecksum is set to 'y'
669 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
671 s = getenv ("flashchecksum");
672 if (s && (*s == 'y')) {
673 printf (" CRC: %08lX",
675 (const unsigned char *) CFG_FLASH_BASE,
681 print_size (flash_size, "\n");
682 #endif /* CFG_FLASH_CHECKSUM */
688 bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
689 bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
690 #if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
691 bd->bi_flashoffset = 0;
692 #elif CFG_MONITOR_BASE == CFG_FLASH_BASE
693 bd->bi_flashoffset = CFG_MONITOR_LEN; /* reserved area for startup monitor */
695 bd->bi_flashoffset = 0;
699 bd->bi_flashsize = 0;
700 bd->bi_flashstart = 0;
701 bd->bi_flashoffset = 0;
702 #endif /* !CFG_NO_FLASH */
706 /* initialize higher level parts of CPU like time base and timers */
711 /* initialize malloc() area */
716 # if !defined(CFG_ENV_IS_IN_EEPROM)
722 /* relocate environment function pointers etc. */
726 * Fill in missing fields of bd_info.
727 * We do this here, where we have "normal" access to the
728 * environment; we used to do this still running from ROM,
729 * where had to use getenv_r(), which can be pretty slow when
730 * the environment is in EEPROM.
732 s = getenv ("ethaddr");
733 #if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
735 board_get_enetaddr (bd->bi_enetaddr);
738 for (i = 0; i < 6; ++i) {
739 bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
741 s = (*e) ? e + 1 : e;
744 if ((gd->board_type >> 16) == 2)
745 bd->bi_ethspeed = gd->board_type & 0xFFFF;
747 bd->bi_ethspeed = 0xFFFF;
751 load_sernum_ethaddr ();
754 #if defined(CFG_GT_6426x) || defined(CONFIG_PN62)
755 /* handle the 2nd ethernet address */
757 s = getenv ("eth1addr");
759 for (i = 0; i < 6; ++i) {
760 bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
762 s = (*e) ? e + 1 : e;
765 #if defined(CFG_GT_6426x)
766 /* handle the 3rd ethernet address */
768 s = getenv ("eth2addr");
770 for (i = 0; i < 6; ++i) {
771 bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
773 s = (*e) ? e + 1 : e;
778 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
780 load_sernum_ethaddr ();
783 bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
787 #if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx)
789 * Do pci configuration
794 /** leave this here (after malloc(), environment and PCI are working) **/
795 /* Initialize devices */
798 /* allocate syscalls table (console_init_r will fill it in */
799 syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
801 /* Initialize the console (after the relocation and devices init) */
803 /** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
806 #if defined(CONFIG_CCM) || \
807 defined(CONFIG_COGENT) || \
808 defined(CONFIG_CPCI405) || \
809 defined(CONFIG_EVB64260) || \
810 defined(CONFIG_HYMOD) || \
811 defined(CONFIG_KUP4K) || \
812 defined(CONFIG_LWMON) || \
813 defined(CONFIG_PCU_E) || \
814 defined(CONFIG_W7O) || \
815 defined(CONFIG_MISC_INIT_R)
816 /* miscellaneous platform dependent initialisations */
821 if (bd->bi_ethspeed != 0xFFFF)
822 hermes_start_lxt980 ((int) bd->bi_ethspeed);
825 #if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
826 defined(CONFIG_CCM) || \
827 defined(CONFIG_ELPT860) || \
828 defined(CONFIG_EP8260) || \
829 defined(CONFIG_IP860) || \
830 defined(CONFIG_IVML24) || \
831 defined(CONFIG_IVMS8) || \
832 defined(CONFIG_LWMON) || \
833 defined(CONFIG_MPC8260ADS) || \
834 defined(CONFIG_PCU_E) || \
835 defined(CONFIG_RPXSUPER) || \
836 defined(CONFIG_SPD823TS) )
840 puts ("Reset Ethernet PHY\n");
845 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
852 printf ("U-Boot relocated to %08lx\n", dest_addr);
860 /* Must happen after interrupts are initialized since
861 * an irq handler gets installed
863 #ifdef CONFIG_SERIAL_SOFTWARE_FIFO
864 serial_buffered_init();
867 #ifdef CONFIG_STATUS_LED
868 status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
875 /* Insert function pointers now that we have relocated the code */
877 /* Initialize from environment */
878 if ((s = getenv ("loadaddr")) != NULL) {
879 load_addr = simple_strtoul (s, NULL, 16);
881 #if (CONFIG_COMMANDS & CFG_CMD_NET)
882 if ((s = getenv ("bootfile")) != NULL) {
883 copy_filename (BootFile, s, sizeof (BootFile));
885 #endif /* CFG_CMD_NET */
889 #if (CONFIG_COMMANDS & CFG_CMD_SCSI)
895 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
901 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
908 post_run (NULL, POST_RAM | post_bootmode_get(0));
909 if (post_bootmode_get(0) & POST_POWERFAIL) {
910 post_bootmode_clear();
915 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
921 #if (CONFIG_COMMANDS & CFG_CMD_IDE)
923 # ifdef CONFIG_IDE_8xx_PCCARD
929 #endif /* CFG_CMD_IDE */
931 #ifdef CONFIG_LAST_STAGE_INIT
934 * Some parts can be only initialized if all others (like
935 * Interrupts) are up and running (i.e. the PC-style ISA
941 #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
946 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
948 * Export available size of memory for Linux,
949 * taking into account the protected RAM at top of memory
957 if ((s = getenv ("pram")) != NULL) {
958 pram = simple_strtoul (s, NULL, 10);
965 #ifdef CONFIG_LOGBUFFER
966 /* Also take the logbuffer into account (pram is in kB) */
967 pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
969 sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
970 setenv ("mem", memsz);
974 /* Initialization complete - start the monitor */
976 /* main_loop() can return to retry autoboot, if so just run it again. */
982 /* NOTREACHED - no way out of command loop except booting */
987 puts ("### ERROR ### Please RESET the board ###\n");
991 #if 0 /* We could use plain global data, but the resulting code is bigger */
993 * Pointer to initial global data area
995 * Here we initialize it.
997 #undef XTRN_DECLARE_GLOBAL_DATA_PTR
998 #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
999 DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
1002 /************************************************************************/