2 ; Graphics driver for the 640x200x2 mode on the C128 VDC
3 ; Maciej 'YTM/Elysium' Witkowiak <ytm@elysium.pl>
5 ; 2004-04-04, Greg King
8 ; For any smart monkey that will try to optimize this: PLEASE do tests on
9 ; real VDC, not only VICE.
11 ; Only DONE routine contains C128-mode specific stuff, everything else will
12 ; work in C64-mode of C128 (C64 needs full VDC init then).
14 ; With special initialization and CALC we can get 320x200 double-pixel mode.
16 ; Color translation values for BROWN and GRAY3 are obviously wrong, they
17 ; could be replaced by equiv. of ORANGE and GRAY2 but this would give only
18 ; 14 of 16 colors available.
20 ; Register 25 ($19) is said to require different value for VDC v1, but I
21 ; couldn't find what it should be.
23 .include "zeropage.inc"
25 .include "tgi-kernel.inc"
26 .include "tgi-mode.inc"
27 .include "tgi-error.inc"
32 ; ------------------------------------------------------------------------
35 VDC_ADDR_REG = $D600 ; VDC address
36 VDC_DATA_REG = $D601 ; VDC data
38 VDC_DSP_HI = 12 ; registers used
49 ; ------------------------------------------------------------------------
50 ; Header. Includes jump table and constants.
54 ; First part of the header is a structure that has a magic and defines the
55 ; capabilities of the driver
57 .byte $74, $67, $69 ; "tgi"
58 .byte TGI_API_VERSION ; TGI API version number
59 xres: .word 640 ; X resolution
60 yres: .word 200 ; Y resolution
61 .byte 2 ; Number of drawing colors
62 pages: .byte 1 ; Number of screens available
63 .byte 8 ; System font X size
64 .byte 8 ; System font Y size
65 .res 4, $00 ; Reserved for future extensions
67 ; Next comes the jump table. Currently all entries must be valid and may point
68 ; to an RTS for test versions (function not implemented).
90 .addr 0 ; IRQ entry is unused
92 ; ------------------------------------------------------------------------
95 ; Variables mapped to the zero page segment variables. Some of these are
96 ; used for passing parameters to the driver.
104 ADDR = tmp1 ; (2) CALC
105 TEMP = tmp3 ; CALC icmp
108 TEMP4 = sreg+1 ; LINE
110 ; Line routine stuff (must be on zpage)
113 ERR = regsave ; (2) LINE
114 NX = regsave+2 ; (2) LINE
116 XX = ptr3 ; (2) CIRCLE
117 YY = ptr4 ; (2) CIRCLE
118 MaxO = sreg ; (overwritten by TEMP3+TEMP4, but restored from OG/OU anyway)
119 XS = regsave ; (2) CIRCLE
120 YS = regsave+2 ; (2) CIRCLE
122 ; Absolute variables used in the code
126 SCRBASE: .res 1 ; High byte of screen base
128 ERROR: .res 1 ; Error code
129 PALETTE: .res 2 ; The current palette
131 BITMASK: .res 1 ; $00 = clear, $FF = set pixels
133 OLDCOLOR: .res 1 ; colors before entering gfx mode
135 ; Line routine stuff (combined with CIRCLE to save space)
152 ; Constants and tables
156 DEFPALETTE: .byte $00, $0f ; White on black
157 PALETTESIZE = * - DEFPALETTE
159 BITTAB: .byte $80,$40,$20,$10,$08,$04,$02,$01
161 BITMASKL: .byte %11111111, %01111111, %00111111, %00011111
162 .byte %00001111, %00000111, %00000011, %00000001
164 BITMASKR: .byte %10000000, %11000000, %11100000, %11110000
165 .byte %11111000, %11111100, %11111110, %11111111
167 ; color translation table (indexed by VIC color)
168 COLTRANS: .byte $00, $0f, $08, $06, $0a, $04, $02, $0c
169 .byte $0d, $0b, $09, $01, $0e, $05, $03, $07
170 ; colors BROWN and GRAY3 are wrong
172 ; VDC initialization table (reg),(val),...,$ff
174 .byte VDC_DSP_HI, 0 ; viewpage 0 as default
176 .byte VDC_HSCROLL, $87
179 SCN80CLR: .byte 27,88,147,27,88,0
183 ; ------------------------------------------------------------------------
184 ; INSTALL routine. Is called after the driver is loaded into memory. May
185 ; initialize anything that has to be done just once. Is probably empty
188 ; Must set an error code: NO
192 ; check for VDC version and update register $19 value
194 ; check for VDC ram size and update number of available screens
196 ldx #VDC_CSET ; determine size of RAM...
200 jsr VDCWriteReg ; turn on 64k
202 jsr settestadr1 ; save original value of test byte
206 lda #$55 ; write $55 here
208 jsr test64k ; read it here and there
209 lda #$aa ; write $aa here
211 jsr test64k ; read it here and there
215 jsr VDCWriteByte ; restore original value of test byte
217 lda ptr1 ; do bytes match?
226 jsr VDCWriteReg ; restore 16/64k flag
227 jmp @endok ; and leave default values for 16k
234 sta SCRBASE ; draw page 0 as default
244 jsr VDCWriteByte ; write $55
246 jsr VDCReadByte ; read here
249 jsr VDCReadByte ; and there
258 ldy #$02 ; test page 2 (here)
261 ldy #$42 ; or page 64+2 (there)
265 ; ------------------------------------------------------------------------
266 ; UNINSTALL routine. Is called before the driver is removed from memory. May
267 ; clean up anything done by INSTALL but is probably empty most of the time.
269 ; Must set an error code: NO
276 ; ------------------------------------------------------------------------
277 ; INIT: Changes an already installed device from text mode to graphics
279 ; Note that INIT/DONE may be called multiple times while the driver
280 ; is loaded, while INSTALL is only called once, so any code that is needed
281 ; to initializes variables and so on must go here. Setting palette and
282 ; clearing the screen is not needed because this is called by the graphics
284 ; The graphics kernel will never call INIT when a graphics mode is already
285 ; active, so there is no need to protect against that.
287 ; Must set an error code: YES
292 ; Initialize variables
297 ; Remeber current color value
302 ; Switch into graphics mode (set view page 0)
305 @L2: ldx InitVDCTab,y
314 ; Done, reset the error code
320 ; ------------------------------------------------------------------------
321 ; DONE: Will be called to switch the graphics device back into text mode.
322 ; The graphics kernel will never call DONE when no graphics mode is active,
323 ; so there is no need to protect against that.
325 ; Must set an error code: NO
329 ; This part is C128-mode specific
330 jsr $e179 ; reload character set and setup VDC
332 lda $d7 ; in 80-columns?
336 jsr $ffd2 ; print \xe,clr,\xe
340 jsr $ffd2 ; print clr
341 @L1: lda #0 ; restore view page
346 jsr VDCWriteReg ; restore color (background)
349 jmp VDCWriteReg ; switch to text screen
351 ; ------------------------------------------------------------------------
352 ; GETERROR: Return the error code in A and clear it.
360 ; ------------------------------------------------------------------------
361 ; CONTROL: Platform/driver specific entry point.
363 ; Must set an error code: YES
367 lda #TGI_ERR_INV_FUNC
371 ; ------------------------------------------------------------------------
372 ; CLEAR: Clears the screen.
374 ; Must set an error code: NO
383 jsr VDCWriteReg ; set fill mode
385 jsr VDCWriteByte ; put 1rst byte (fill value)
393 jmp VDCWriteReg ; 1+62*256+127=16000=(640*256)/8
395 ; ------------------------------------------------------------------------
396 ; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
397 ; The page number is already checked to be valid by the graphics kernel.
399 ; Must set an error code: NO (will only be called if page ok)
410 ; ------------------------------------------------------------------------
411 ; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
412 ; The page number is already checked to be valid by the graphics kernel.
414 ; Must set an error code: NO (will only be called if page ok)
425 ; ------------------------------------------------------------------------
426 ; SETCOLOR: Set the drawing color (in A). The new color is already checked
427 ; to be in a valid range (0..maxcolor-1).
429 ; Must set an error code: NO (will only be called if color ok)
439 ; ------------------------------------------------------------------------
440 ; SETPALETTE: Set the palette (not available with all drivers/hardware).
441 ; A pointer to the palette is passed in ptr1. Must set an error if palettes
444 ; Must set an error code: YES
449 @L1: lda (ptr1),y ; Copy the palette
450 and #$0F ; Make a valid color
455 ; Get the color entries from the palette
457 ldy PALETTE+1 ; Foreground color
463 ldy PALETTE ; Background color
467 jsr VDCWriteReg ; Clear error code
472 ; ------------------------------------------------------------------------
473 ; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
474 ; set the palette should return the default palette here, so there's no
475 ; way for this function to fail.
477 ; Must set an error code: NO
485 ; ------------------------------------------------------------------------
486 ; GETDEFPALETTE: Return the default palette for the driver in A/X. All
487 ; drivers should return something reasonable here, even drivers that don't
488 ; support palettes, otherwise the caller has no way to determine the colors
489 ; of the (not changeable) palette.
491 ; Must set an error code: NO (all drivers must have a default palette)
499 ; ------------------------------------------------------------------------
500 ; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
501 ; color. The coordinates passed to this function are never outside the
502 ; visible screen area, so there is no need for clipping inside this function.
504 ; Must set an error code: NO
519 jsr icmp ; ( x < xres ) ...
528 jsr icmp ; ... && ( y < yres )
533 jsr CALC ; Calculate coordinates
555 ; ------------------------------------------------------------------------
556 ; GETPIXEL: Read the color value of a pixel and return it in A/X. The
557 ; coordinates passed to this function are never outside the visible screen
558 ; area, so there is no need for clipping inside this function.
562 jsr CALC ; Calculate coordinates
564 stx TEMP ; preserve X
576 @L1: tya ; Get color value into A
577 ldx #$00 ; Clear high byte
580 ; ------------------------------------------------------------------------
581 ; LINE: Draw a line from X1/Y1 to X2/Y2, where X1/Y1 = ptr1/ptr2 and
582 ; X2/Y2 = ptr3/ptr4 using the current drawing color.
584 ; Must set an error code: NO
676 ; for (count=nx;count>0;--count) {
681 @L0166: lda COUNT ; count>0
686 @L0167: jsr SETPIXELCLIP
726 ; if (abs(pb)<abs(ub)) {
742 ; } else { x1 = x1 + ax
781 ; ------------------------------------------------------------------------
782 ; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
783 ; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
784 ; Contrary to most other functions, the graphics kernel will sort and clip
785 ; the coordinates before calling the driver, so on entry the following
786 ; conditions are valid:
789 ; (X1 >= 0) && (X1 < XRES)
790 ; (X2 >= 0) && (X2 < XRES)
791 ; (Y1 >= 0) && (Y1 < YRES)
792 ; (Y2 >= 0) && (Y2 < YRES)
794 ; Must set an error code: NO
802 ; Original code for a horizontal line
809 jsr CALC ; get data for LEFT
810 lda BITMASKL,x ; remember left address and bitmask
821 jsr CALC ; get data for RIGHT
825 pla ; recall data for LEFT
828 sta X1 ; put left address into X1
831 cmp #%11111111 ; if left bit <> 0
833 sta TEMP2 ; do left byte only...
848 inc X1 ; ... and proceed
852 ; do right byte (if Y2=0 ++ADDR and skip)
854 cmp #%11111111 ; if right bit <> 7
856 inc ADDR ; right bit = 7 - the next one is the last
861 @L11: lda ADDR ; do right byte only...
876 @L2: ; do the fill in the middle
877 lda ADDR ; calculate offset in full bytes
880 beq @L3 ; if equal - there are no more bytes
883 lda X1 ; setup for the left side
886 lda BITMASK ; get color
887 jsr VDCWriteByte ; put 1st value
890 beq @L3 ; 1 byte already written
892 stx ADDR ; if there are more bytes - fill them...
895 jsr VDCWriteReg ; setup for fill
898 jsr VDCWriteReg ; ... fill them NOW!
905 ; End of horizontal line code
920 ; ------------------------------------------------------------------------
921 ; CIRCLE: Draw a circle around the center X1/Y1 (= ptr1/ptr2) with the
922 ; radius in tmp1 and the current drawing color.
924 ; Must set an error code: NO
930 jmp SETPIXELCLIP ; Plot as a point
948 stx YS+1 ; XS/YS to remember the center
957 @L12: ; plot points in 8 slices...
972 sta Y1+1 ; (stack)=ys+y, y1=(stack)
974 jsr SETPIXELCLIP ; plot(xs+x,ys+y)
982 sta Y1+1 ; y3 = y1 = ys-y
984 jsr SETPIXELCLIP ; plot(xs+x,ys-y)
996 jsr SETPIXELCLIP ; plot (xs-x,ys+y)
1001 jsr SETPIXELCLIP ; plot (xs-x,ys-y)
1009 sta X1+1 ; x1 = xs+y
1017 sta Y1+1 ; (stack)=ys+x, y1=(stack)
1019 jsr SETPIXELCLIP ; plot(xs+y,ys+x)
1027 sta Y1+1 ; y3 = y1 = ys-x
1029 jsr SETPIXELCLIP ; plot(xs+y,ys-x)
1033 sta Y1 ; y1 = ys+x(stack)
1041 jsr SETPIXELCLIP ; plot (xs-y,ys+x)
1046 jsr SETPIXELCLIP ; plot (xs-y,ys-x)
1096 @L0148: ; if (abs(ou)<abs(og))
1115 @L014E: ; mo = ou; }
1127 ; ------------------------------------------------------------------------
1128 ; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
1129 ; direction is passend in X/Y, the text direction is passed in A.
1131 ; Must set an error code: NO
1141 ; ------------------------------------------------------------------------
1142 ; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
1143 ; current text style. The text to output is given as a zero terminated
1144 ; string with address in ptr3.
1146 ; Must set an error code: NO
1152 ; ------------------------------------------------------------------------
1153 ; Calculate all variables to plot the pixel at X1/Y1.
1154 ;------------------------
1156 ;> ADDR - address of card
1157 ;> X - bit number (X1 & 7)
1171 sta ADDR+1 ; Y*4+Y=Y*5
1181 sta ADDR ; Y*5*16=Y*80
1194 lda ADDR+1 ; ADDR = Y*80+x/8
1206 ; copies of some runtime routines
1224 ; compare a/y to zp,x
1225 sta TEMP ; TEMP/TEMP2 - arg2
1233 tya ; x/a - arg1 (a=high)
1264 @L0: bit VDC_ADDR_REG
1273 @L0: bit VDC_ADDR_REG