3 * vim:ts=4:sw=4:expandtab
15 static pid_t configerror_pid = -1;
17 static Match current_match;
19 typedef struct yy_buffer_state *YY_BUFFER_STATE;
20 extern int yylex(struct context *context);
21 extern int yyparse(void);
23 YY_BUFFER_STATE yy_scan_string(const char *);
25 static struct bindings_head *current_bindings;
26 static struct context *context;
28 /* We don’t need yydebug for now, as we got decent error messages using
29 * yyerror(). Should you ever want to extend the parser, it might be handy
30 * to just comment it in again, so it stays here. */
33 void yyerror(const char *error_message) {
34 context->has_errors = true;
37 ELOG("CONFIG: %s\n", error_message);
38 ELOG("CONFIG: in file \"%s\", line %d:\n",
39 context->filename, context->line_number);
40 ELOG("CONFIG: %s\n", context->line_copy);
41 char buffer[context->last_column+1];
42 buffer[context->last_column] = '\0';
43 for (int c = 1; c <= context->last_column; c++)
44 buffer[c-1] = (c >= context->first_column ? '^' : ' ');
45 ELOG("CONFIG: %s\n", buffer);
54 * Goes through each line of buf (separated by \n) and checks for statements /
55 * commands which only occur in i3 v4 configuration files. If it finds any, it
56 * returns version 4, otherwise it returns version 3.
59 static int detect_version(char *buf) {
62 while (*walk != '\0') {
68 /* check for some v4-only statements */
69 if (strncasecmp(line, "bindcode", strlen("bindcode")) == 0 ||
70 strncasecmp(line, "force_focus_wrapping", strlen("force_focus_wrapping")) == 0 ||
71 strncasecmp(line, "# i3 config file (v4)", strlen("# i3 config file (v4)")) == 0 ||
72 strncasecmp(line, "workspace_layout", strlen("workspace_layout")) == 0) {
73 printf("deciding for version 4 due to this line: %.*s\n", (int)(walk-line), line);
77 /* if this is a bind statement, we can check the command */
78 if (strncasecmp(line, "bind", strlen("bind")) == 0) {
79 char *bind = strchr(line, ' ');
82 while ((*bind == ' ' || *bind == '\t') && *bind != '\0')
86 if ((bind = strchr(bind, ' ')) == NULL)
88 while ((*bind == ' ' || *bind == '\t') && *bind != '\0')
92 if (strncasecmp(bind, "layout", strlen("layout")) == 0 ||
93 strncasecmp(bind, "floating", strlen("floating")) == 0 ||
94 strncasecmp(bind, "workspace", strlen("workspace")) == 0 ||
95 strncasecmp(bind, "focus left", strlen("focus left")) == 0 ||
96 strncasecmp(bind, "focus right", strlen("focus right")) == 0 ||
97 strncasecmp(bind, "focus up", strlen("focus up")) == 0 ||
98 strncasecmp(bind, "focus down", strlen("focus down")) == 0 ||
99 strncasecmp(bind, "border normal", strlen("border normal")) == 0 ||
100 strncasecmp(bind, "border 1pixel", strlen("border 1pixel")) == 0 ||
101 strncasecmp(bind, "border borderless", strlen("border borderless")) == 0) {
102 printf("deciding for version 4 due to this line: %.*s\n", (int)(walk-line), line);
108 /* advance to the next line */
117 * Calls i3-migrate-config-to-v4.pl to migrate a configuration file (input
120 * Returns the converted config file or NULL if there was an error (for
121 * example the script could not be found in $PATH or the i3 executable’s
125 static char *migrate_config(char *input, off_t size) {
129 if (pipe(writepipe) != 0 ||
130 pipe(readpipe) != 0) {
131 warn("migrate_config: Could not create pipes");
137 warn("Could not fork()");
143 /* close writing end of writepipe, connect reading side to stdin */
145 dup2(writepipe[0], 0);
147 /* close reading end of readpipe, connect writing side to stdout */
149 dup2(readpipe[1], 1);
151 static char *argv[] = {
152 NULL, /* will be replaced by the executable path */
155 exec_i3_utility("i3-migrate-config-to-v4.pl", argv);
160 /* close reading end of the writepipe (connected to the script’s stdin) */
163 /* write the whole config file to the pipe, the script will read everything
167 while (written < size) {
168 if ((ret = write(writepipe[1], input + written, size - written)) < 0) {
169 warn("Could not write to pipe");
176 /* close writing end of the readpipe (connected to the script’s stdout) */
179 /* read the script’s output */
180 int conv_size = 65535;
181 char *converted = malloc(conv_size);
184 if (read_bytes == conv_size) {
186 converted = realloc(converted, conv_size);
188 ret = read(readpipe[0], converted + read_bytes, conv_size - read_bytes);
190 warn("Cannot read from pipe");
196 /* get the returncode */
199 if (!WIFEXITED(status)) {
200 fprintf(stderr, "Child did not terminate normally, using old config file (will lead to broken behaviour)\n");
204 int returncode = WEXITSTATUS(status);
205 if (returncode != 0) {
206 fprintf(stderr, "Migration process exit code was != 0\n");
207 if (returncode == 2) {
208 fprintf(stderr, "could not start the migration script\n");
209 /* TODO: script was not found. tell the user to fix his system or create a v4 config */
210 } else if (returncode == 1) {
211 fprintf(stderr, "This already was a v4 config. Please add the following line to your config file:\n");
212 fprintf(stderr, "# i3 config file (v4)\n");
213 /* TODO: nag the user with a message to include a hint for i3 in his config file */
222 * Handler which will be called when we get a SIGCHLD for the nagbar, meaning
223 * it exited (or could not be started, depending on the exit code).
226 static void nagbar_exited(EV_P_ ev_child *watcher, int revents) {
227 ev_child_stop(EV_A_ watcher);
228 if (!WIFEXITED(watcher->rstatus)) {
229 fprintf(stderr, "ERROR: i3-nagbar did not exit normally.\n");
233 int exitcode = WEXITSTATUS(watcher->rstatus);
234 printf("i3-nagbar process exited with status %d\n", exitcode);
236 fprintf(stderr, "ERROR: i3-nagbar could not be found. Is it correctly installed on your system?\n");
239 configerror_pid = -1;
243 * Starts an i3-nagbar process which alerts the user that his configuration
244 * file contains one or more errors. Also offers two buttons: One to launch an
245 * $EDITOR on the config file and another one to launch a $PAGER on the error
249 static void start_configerror_nagbar(const char *config_path) {
250 fprintf(stderr, "Would start i3-nagscreen now\n");
251 configerror_pid = fork();
252 if (configerror_pid == -1) {
253 warn("Could not fork()");
258 if (configerror_pid == 0) {
261 if (asprintf(&editaction, TERM_EMU " -e sh -c \"${EDITOR:-vi} \"%s\" && i3-msg reload\"", config_path) == -1)
263 if (asprintf(&pageraction, TERM_EMU " -e sh -c \"${PAGER:-less} \"%s\"\"", errorfilename) == -1)
266 NULL, /* will be replaced by the executable path */
268 "You have an error in your i3 config file!",
272 (errorfilename ? "-b" : NULL),
277 exec_i3_utility("i3-nagbar", argv);
281 /* install a child watcher */
282 ev_child *child = smalloc(sizeof(ev_child));
283 ev_child_init(child, &nagbar_exited, configerror_pid, 0);
284 ev_child_start(main_loop, child);
288 * Kills the configerror i3-nagbar process, if any.
290 * Called when reloading/restarting.
292 * If wait_for_it is set (restarting), this function will waitpid(), otherwise,
293 * ev is assumed to handle it (reloading).
296 void kill_configerror_nagbar(bool wait_for_it) {
297 if (configerror_pid == -1)
300 if (kill(configerror_pid, SIGTERM) == -1)
301 warn("kill(configerror_nagbar) failed");
306 /* When restarting, we don’t enter the ev main loop anymore and after the
307 * exec(), our old pid is no longer watched. So, ev won’t handle SIGCHLD
308 * for us and we would end up with a <defunct> process. Therefore we
310 waitpid(configerror_pid, NULL, 0);
313 void parse_file(const char *f) {
314 SLIST_HEAD(variables_head, Variable) variables = SLIST_HEAD_INITIALIZER(&variables);
315 int fd, ret, read_bytes = 0;
319 char buffer[1026], key[512], value[512];
321 if ((fd = open(f, O_RDONLY)) == -1)
322 die("Could not open configuration file: %s\n", strerror(errno));
324 if (fstat(fd, &stbuf) == -1)
325 die("Could not fstat file: %s\n", strerror(errno));
327 buf = scalloc((stbuf.st_size + 1) * sizeof(char));
328 while (read_bytes < stbuf.st_size) {
329 if ((ret = read(fd, buf + read_bytes, (stbuf.st_size - read_bytes))) < 0)
330 die("Could not read(): %s\n", strerror(errno));
334 if (lseek(fd, 0, SEEK_SET) == (off_t)-1)
335 die("Could not lseek: %s\n", strerror(errno));
337 if ((fstr = fdopen(fd, "r")) == NULL)
338 die("Could not fdopen: %s\n", strerror(errno));
340 while (!feof(fstr)) {
341 if (fgets(buffer, 1024, fstr) == NULL) {
344 die("Could not read configuration file\n");
347 /* sscanf implicitly strips whitespace. Also, we skip comments and empty lines. */
348 if (sscanf(buffer, "%s %[^\n]", key, value) < 1 ||
349 key[0] == '#' || strlen(key) < 3)
352 if (strcasecmp(key, "set") == 0) {
354 die("Malformed variable assignment, name has to start with $\n");
356 /* get key/value for this variable */
357 char *v_key = value, *v_value;
358 if ((v_value = strstr(value, " ")) == NULL)
359 die("Malformed variable assignment, need a value\n");
363 struct Variable *new = scalloc(sizeof(struct Variable));
364 new->key = sstrdup(v_key);
365 new->value = sstrdup(v_value);
366 SLIST_INSERT_HEAD(&variables, new, variables);
367 DLOG("Got new variable %s = %s\n", v_key, v_value);
374 /* For every custom variable, see how often it occurs in the file and
375 * how much extra bytes it requires when replaced. */
376 struct Variable *current, *nearest;
378 /* We need to copy the buffer because we need to invalidate the
379 * variables (otherwise we will count them twice, which is bad when
380 * 'extra' is negative) */
381 char *bufcopy = sstrdup(buf);
382 SLIST_FOREACH(current, &variables, variables) {
383 int extra = (strlen(current->value) - strlen(current->key));
386 (next = strcasestr(bufcopy + (next - bufcopy), current->key)) != NULL;
387 next += strlen(current->key)) {
389 extra_bytes += extra;
394 /* Then, allocate a new buffer and copy the file over to the new one,
395 * but replace occurences of our variables */
396 char *walk = buf, *destwalk;
397 char *new = smalloc((stbuf.st_size + extra_bytes + 1) * sizeof(char));
399 while (walk < (buf + stbuf.st_size)) {
400 /* Find the next variable */
401 SLIST_FOREACH(current, &variables, variables)
402 current->next_match = strcasestr(walk, current->key);
404 int distance = stbuf.st_size;
405 SLIST_FOREACH(current, &variables, variables) {
406 if (current->next_match == NULL)
408 if ((current->next_match - walk) < distance) {
409 distance = (current->next_match - walk);
413 if (nearest == NULL) {
414 /* If there are no more variables, we just copy the rest */
415 strncpy(destwalk, walk, (buf + stbuf.st_size) - walk);
416 destwalk += (buf + stbuf.st_size) - walk;
420 /* Copy until the next variable, then copy its value */
421 strncpy(destwalk, walk, distance);
422 strncpy(destwalk + distance, nearest->value, strlen(nearest->value));
423 walk += distance + strlen(nearest->key);
424 destwalk += distance + strlen(nearest->value);
428 /* analyze the string to find out whether this is an old config file (3.x)
429 * or a new config file (4.x). If it’s old, we run the converter script. */
430 int version = detect_version(buf);
432 /* We need to convert this v3 configuration */
433 char *converted = migrate_config(new, stbuf.st_size);
434 if (converted != NULL) {
436 printf("****************************************************************\n");
437 printf("NOTE: Automatically converted configuration file from v3 to v4.\n");
439 printf("Please convert your config file to v4. You can use this command:\n");
440 printf(" mv %s %s.O\n", f, f);
441 printf(" i3-migrate-config-to-v4.pl %s.O > %s\n", f, f);
442 printf("****************************************************************\n");
448 printf("**********************************************************************\n");
449 printf("ERROR: Could not convert config file. Maybe i3-migrate-config-to-v4.pl\n");
450 printf("was not correctly installed on your system?\n");
451 printf("**********************************************************************\n");
456 /* now lex/parse it */
459 context = scalloc(sizeof(struct context));
460 context->filename = f;
462 if (yyparse() != 0) {
463 fprintf(stderr, "Could not parse configfile\n");
467 if (context->has_errors) {
468 start_configerror_nagbar(f);
471 FREE(context->line_copy);
476 while (!SLIST_EMPTY(&variables)) {
477 current = SLIST_FIRST(&variables);
479 FREE(current->value);
480 SLIST_REMOVE_HEAD(&variables, variables);
488 %lex-param { struct context *context }
493 uint32_t *single_color;
494 struct Colortriple *color;
496 struct Binding *binding;
499 %token <number> NUMBER "<number>"
500 %token <string> WORD "<word>"
501 %token <string> STR "<string>"
502 %token <string> STR_NG "<string (non-greedy)>"
503 %token <string> HEX "<hex>"
504 %token <string> OUTPUT "<RandR output>"
507 %token TOKCOMMENT "<comment>"
508 %token TOKFONT "font"
509 %token TOKBINDSYM "bindsym"
510 %token <number> MODIFIER "<modifier>"
511 %token TOKCONTROL "control"
512 %token TOKSHIFT "shift"
513 %token TOKFLOATING_MODIFIER "floating_modifier"
514 %token <string> QUOTEDSTRING "<quoted string>"
515 %token TOKWORKSPACE "workspace"
516 %token TOKOUTPUT "output"
517 %token TOKASSIGN "assign"
519 %token TOKIPCSOCKET "ipc_socket"
520 %token TOKRESTARTSTATE "restart_state"
521 %token TOKEXEC "exec"
522 %token TOKEXEC_ALWAYS "exec_always"
523 %token <single_color> TOKSINGLECOLOR
524 %token <color> TOKCOLOR
526 %token TOKMODE "mode"
527 %token TOK_ORIENTATION "default_orientation"
528 %token TOK_HORIZ "horizontal"
529 %token TOK_VERT "vertical"
530 %token TOK_AUTO "auto"
531 %token TOK_WORKSPACE_LAYOUT "workspace_layout"
532 %token TOKNEWWINDOW "new_window"
533 %token TOK_NORMAL "normal"
534 %token TOK_NONE "none"
535 %token TOK_1PIXEL "1pixel"
536 %token TOKFOCUSFOLLOWSMOUSE "focus_follows_mouse"
537 %token TOK_FORCE_FOCUS_WRAPPING "force_focus_wrapping"
538 %token TOKWORKSPACEBAR "workspace_bar"
539 %token TOK_DEFAULT "default"
540 %token TOK_STACKING "stacking"
541 %token TOK_TABBED "tabbed"
542 %token <number> TOKSTACKLIMIT "stack-limit"
543 %token TOK_POPUP_DURING_FULLSCREEN "popup_during_fullscreen"
544 %token TOK_IGNORE "ignore"
545 %token TOK_LEAVE_FULLSCREEN "leave_fullscreen"
546 %token TOK_FOR_WINDOW "for_window"
548 %token TOK_MARK "mark"
549 %token TOK_CLASS "class"
551 %token TOK_CON_ID "con_id"
552 %token TOK_TITLE "title"
554 %type <binding> binding
555 %type <binding> bindcode
556 %type <binding> bindsym
557 %type <number> binding_modifiers
558 %type <number> binding_modifier
559 %type <number> direction
560 %type <number> layout_mode
561 %type <number> border_style
562 %type <number> new_window
563 %type <number> colorpixel
565 %type <number> popup_setting
566 %type <string> command
567 %type <string> word_or_number
568 %type <string> optional_workspace_name
569 %type <string> workspace_name
570 %type <string> window_class
587 | focus_follows_mouse
588 | force_focus_wrapping
601 | popup_during_fullscreen
615 TAILQ_INSERT_TAIL(bindings, $1, bindings);
620 TOKBINDCODE bindcode { $$ = $2; }
621 | TOKBINDSYM bindsym { $$ = $2; }
625 binding_modifiers NUMBER command
627 printf("\tFound keycode binding mod%d with key %d and command %s\n", $1, $2, $3);
628 Binding *new = scalloc(sizeof(Binding));
639 binding_modifiers word_or_number command
641 printf("\tFound keysym binding mod%d with key %s and command %s\n", $1, $2, $3);
642 Binding *new = scalloc(sizeof(Binding));
653 TOK_FOR_WINDOW match command
655 printf("\t should execute command %s for the criteria mentioned above\n", $3);
656 Assignment *assignment = scalloc(sizeof(Assignment));
657 assignment->type = A_COMMAND;
658 assignment->match = current_match;
659 assignment->dest.command = $3;
660 TAILQ_INSERT_TAIL(&assignments, assignment, assignments);
665 | matchstart criteria matchend
667 printf("match parsed\n");
675 match_init(¤t_match);
682 printf("match specification finished\n");
689 printf("criteria: class = %s\n", $3);
690 current_match.class = $3;
694 printf("criteria: id = %s\n", $3);
696 long parsed = strtol($3, &end, 10);
697 if (parsed == LONG_MIN ||
698 parsed == LONG_MAX ||
700 (end && *end != '\0')) {
701 ELOG("Could not parse con id \"%s\"\n", $3);
703 current_match.con_id = (Con*)parsed;
704 printf("id as int = %p\n", current_match.con_id);
709 printf("criteria: window id = %s\n", $3);
711 long parsed = strtol($3, &end, 10);
712 if (parsed == LONG_MIN ||
713 parsed == LONG_MAX ||
715 (end && *end != '\0')) {
716 ELOG("Could not parse window id \"%s\"\n", $3);
718 current_match.id = parsed;
719 printf("window id as int = %d\n", current_match.id);
724 printf("criteria: mark = %s\n", $3);
725 current_match.mark = $3;
729 printf("criteria: title = %s\n", $3);
730 current_match.title = $3;
740 asprintf(&$$, "%d", $1);
745 TOKMODE QUOTEDSTRING '{' modelines '}'
747 if (strcasecmp($2, "default") == 0) {
748 printf("You cannot use the name \"default\" for your mode\n");
751 printf("\t now in mode %s\n", $2);
752 printf("\t current bindings = %p\n", current_bindings);
754 TAILQ_FOREACH(binding, current_bindings, bindings) {
755 printf("got binding on mods %d, keycode %d, symbol %s, command %s\n",
756 binding->mods, binding->keycode, binding->symbol, binding->command);
759 struct Mode *mode = scalloc(sizeof(struct Mode));
761 mode->bindings = current_bindings;
762 current_bindings = NULL;
763 SLIST_INSERT_HEAD(&modes, mode, modes);
777 if (current_bindings == NULL) {
778 current_bindings = scalloc(sizeof(struct bindings_head));
779 TAILQ_INIT(current_bindings);
782 TAILQ_INSERT_TAIL(current_bindings, $1, bindings);
787 TOKFLOATING_MODIFIER binding_modifiers
789 DLOG("floating modifier = %d\n", $2);
790 config.floating_modifier = $2;
795 TOK_ORIENTATION direction
797 DLOG("New containers should start with split direction %d\n", $2);
798 config.default_orientation = $2;
803 TOK_HORIZ { $$ = HORIZ; }
804 | TOK_VERT { $$ = VERT; }
805 | TOK_AUTO { $$ = NO_ORIENTATION; }
809 TOK_WORKSPACE_LAYOUT layout_mode
811 DLOG("new containers will be in mode %d\n", $2);
812 config.default_layout = $2;
815 /* We also need to change the layout of the already existing
816 * workspaces here. Workspaces may exist at this point because
817 * of the other directives which are modifying workspaces
818 * (setting the preferred screen or name). While the workspace
819 * objects are already created, they have never been used.
820 * Thus, the user very likely awaits the default container mode
821 * to trigger in this case, regardless of where it is inside
822 * his configuration file. */
824 TAILQ_FOREACH(ws, workspaces, workspaces) {
825 if (ws->table == NULL)
827 switch_layout_mode(global_conn,
829 config.container_mode);
833 | TOK_WORKSPACE_LAYOUT TOKSTACKLIMIT TOKSTACKLIMIT NUMBER
835 DLOG("stack-limit %d with val %d\n", $3, $4);
836 config.container_stack_limit = $3;
837 config.container_stack_limit_value = $4;
840 /* See the comment above */
842 TAILQ_FOREACH(ws, workspaces, workspaces) {
843 if (ws->table == NULL)
845 Container *con = ws->table[0][0];
846 con->stack_limit = config.container_stack_limit;
847 con->stack_limit_value = config.container_stack_limit_value;
854 TOK_DEFAULT { $$ = L_DEFAULT; }
855 | TOK_STACKING { $$ = L_STACKED; }
856 | TOK_TABBED { $$ = L_TABBED; }
860 TOKNEWWINDOW border_style
862 DLOG("new windows should start with border style %d\n", $2);
863 config.default_border = $2;
868 TOK_NORMAL { $$ = BS_NORMAL; }
869 | TOK_NONE { $$ = BS_NONE; }
870 | TOK_1PIXEL { $$ = BS_1PIXEL; }
880 DLOG("checking word \"%s\"\n", $1);
881 $$ = (strcasecmp($1, "yes") == 0 ||
882 strcasecmp($1, "true") == 0 ||
883 strcasecmp($1, "on") == 0 ||
884 strcasecmp($1, "enable") == 0 ||
885 strcasecmp($1, "active") == 0);
890 TOKFOCUSFOLLOWSMOUSE bool
892 DLOG("focus follows mouse = %d\n", $2);
893 config.disable_focus_follows_mouse = !($2);
897 force_focus_wrapping:
898 TOK_FORCE_FOCUS_WRAPPING bool
900 DLOG("force focus wrapping = %d\n", $2);
901 config.force_focus_wrapping = $2;
908 DLOG("workspace bar = %d\n", $2);
909 config.disable_workspace_bar = !($2);
914 TOKWORKSPACE NUMBER TOKOUTPUT OUTPUT optional_workspace_name
918 DLOG("Invalid workspace assignment, workspace number %d out of range\n", ws_num);
920 char *ws_name = NULL;
922 asprintf(&ws_name, "%d", ws_num);
927 DLOG("Should assign workspace %s to output %s\n", ws_name, $4);
928 struct Workspace_Assignment *assignment = scalloc(sizeof(struct Workspace_Assignment));
929 assignment->name = ws_name;
930 assignment->output = $4;
931 TAILQ_INSERT_TAIL(&ws_assignments, assignment, ws_assignments);
934 | TOKWORKSPACE NUMBER workspace_name
938 DLOG("Invalid workspace assignment, workspace number %d out of range\n", ws_num);
940 DLOG("workspace name to: %s\n", $3);
942 if ($<string>3 != NULL) {
943 workspace_set_name(workspace_get(ws_num - 1), $<string>3);
951 optional_workspace_name:
952 /* empty */ { $$ = NULL; }
953 | workspace_name { $$ = $1; }
957 QUOTEDSTRING { $$ = $1; }
963 TOKASSIGN window_class STR
965 printf("assignment of %s to *%s*\n", $2, $3);
966 char *workspace = $3;
969 Assignment *assignment = scalloc(sizeof(Assignment));
970 Match *match = &(assignment->match);
973 char *separator = NULL;
974 if ((separator = strchr(criteria, '/')) != NULL) {
975 *(separator++) = '\0';
976 match->title = sstrdup(separator);
978 if (*criteria != '\0')
979 match->class = sstrdup(criteria);
982 printf(" class = %s\n", match->class);
983 printf(" title = %s\n", match->title);
985 /* Compatibility with older versions: If the assignment target starts
986 * with ~, we create the equivalent of:
988 * for_window [class="foo"] mode floating
990 if (*workspace == '~') {
992 if (*workspace == '\0') {
993 /* This assignment was *only* for floating */
994 assignment->type = A_COMMAND;
995 assignment->dest.command = sstrdup("floating enable");
996 TAILQ_INSERT_TAIL(&assignments, assignment, assignments);
999 /* Create a new assignment and continue afterwards */
1000 Assignment *floating = scalloc(sizeof(Assignment));
1001 match_copy(&(floating->match), match);
1002 floating->type = A_COMMAND;
1003 floating->dest.command = sstrdup("floating enable");
1004 TAILQ_INSERT_TAIL(&assignments, floating, assignments);
1008 assignment->type = A_TO_WORKSPACE;
1009 assignment->dest.workspace = workspace;
1010 TAILQ_INSERT_TAIL(&assignments, assignment, assignments);
1022 config.ipc_socket_path = $2;
1029 config.restart_state_path = $2;
1036 struct Autostart *new = smalloc(sizeof(struct Autostart));
1038 TAILQ_INSERT_TAIL(&autostarts, new, autostarts);
1045 struct Autostart *new = smalloc(sizeof(struct Autostart));
1047 TAILQ_INSERT_TAIL(&autostarts_always, new, autostarts_always);
1054 ELOG("The terminal option is DEPRECATED and has no effect. "
1055 "Please remove it from your configuration file.\n");
1062 config.font = load_font($2, true);
1063 printf("font %s\n", $2);
1068 TOKSINGLECOLOR colorpixel
1070 uint32_t *dest = $1;
1076 TOKCOLOR colorpixel colorpixel colorpixel
1078 struct Colortriple *dest = $1;
1081 dest->background = $3;
1090 if (asprintf(&hex, "#%s", $2) == -1)
1092 $$ = get_colorpixel(hex);
1099 /* NULL */ { $$ = 0; }
1101 | binding_modifiers '+' binding_modifier { $$ = $1 | $3; }
1102 | binding_modifiers '+' { $$ = $1; }
1106 MODIFIER { $$ = $1; }
1107 | TOKCONTROL { $$ = BIND_CONTROL; }
1108 | TOKSHIFT { $$ = BIND_SHIFT; }
1111 popup_during_fullscreen:
1112 TOK_POPUP_DURING_FULLSCREEN popup_setting
1114 DLOG("popup_during_fullscreen setting: %d\n", $2);
1115 config.popup_during_fullscreen = $2;
1120 TOK_IGNORE { $$ = PDF_IGNORE; }
1121 | TOK_LEAVE_FULLSCREEN { $$ = PDF_LEAVE_FULLSCREEN; }