1 /***************************************************************************
2 * Copyright (C) 2005, 2007 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * Copyright (C) 2009 Michael Schwingen *
5 * michael@schwingen.org *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
29 #include "binarybuffer.h"
32 static int cfi_register_commands(struct command_context_s *cmd_ctx);
33 static int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
34 static int cfi_erase(struct flash_bank_s *bank, int first, int last);
35 static int cfi_protect(struct flash_bank_s *bank, int set, int first, int last);
36 static int cfi_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count);
37 static int cfi_probe(struct flash_bank_s *bank);
38 static int cfi_auto_probe(struct flash_bank_s *bank);
39 static int cfi_protect_check(struct flash_bank_s *bank);
40 static int cfi_info(struct flash_bank_s *bank, char *buf, int buf_size);
42 //static int cfi_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
44 #define CFI_MAX_BUS_WIDTH 4
45 #define CFI_MAX_CHIP_WIDTH 4
47 /* defines internal maximum size for code fragment in cfi_intel_write_block() */
48 #define CFI_MAX_INTEL_CODESIZE 256
50 flash_driver_t cfi_flash =
53 .register_commands = cfi_register_commands,
54 .flash_bank_command = cfi_flash_bank_command,
56 .protect = cfi_protect,
59 .auto_probe = cfi_auto_probe,
60 .erase_check = default_flash_blank_check,
61 .protect_check = cfi_protect_check,
65 static cfi_unlock_addresses_t cfi_unlock_addresses[] =
67 [CFI_UNLOCK_555_2AA] = { .unlock1 = 0x555, .unlock2 = 0x2aa },
68 [CFI_UNLOCK_5555_2AAA] = { .unlock1 = 0x5555, .unlock2 = 0x2aaa },
71 /* CFI fixups foward declarations */
72 static void cfi_fixup_0002_erase_regions(flash_bank_t *flash, void *param);
73 static void cfi_fixup_0002_unlock_addresses(flash_bank_t *flash, void *param);
74 static void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *flash, void *param);
76 /* fixup after reading cmdset 0002 primary query table */
77 static const cfi_fixup_t cfi_0002_fixups[] = {
78 {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
79 {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
80 {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
81 {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
82 {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
83 {CFI_MFR_ATMEL, 0x00C8, cfi_fixup_atmel_reversed_erase_regions, NULL},
84 {CFI_MFR_FUJITSU, 0x226b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
85 {CFI_MFR_AMIC, 0xb31a, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
86 {CFI_MFR_MX, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
87 {CFI_MFR_AMD, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
88 {CFI_MFR_ANY, CFI_ID_ANY, cfi_fixup_0002_erase_regions, NULL},
92 /* fixup after reading cmdset 0001 primary query table */
93 static const cfi_fixup_t cfi_0001_fixups[] = {
97 static void cfi_fixup(flash_bank_t *bank, const cfi_fixup_t *fixups)
99 cfi_flash_bank_t *cfi_info = bank->driver_priv;
100 const cfi_fixup_t *f;
102 for (f = fixups; f->fixup; f++)
104 if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) &&
105 ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
107 f->fixup(bank, f->param);
112 /* inline uint32_t flash_address(flash_bank_t *bank, int sector, uint32_t offset) */
113 static __inline__ uint32_t flash_address(flash_bank_t *bank, int sector, uint32_t offset)
115 cfi_flash_bank_t *cfi_info = bank->driver_priv;
117 if (cfi_info->x16_as_x8) offset *= 2;
119 /* while the sector list isn't built, only accesses to sector 0 work */
121 return bank->base + offset * bank->bus_width;
126 LOG_ERROR("BUG: sector list not yet built");
129 return bank->base + bank->sectors[sector].offset + offset * bank->bus_width;
134 static void cfi_command(flash_bank_t *bank, uint8_t cmd, uint8_t *cmd_buf)
138 /* clear whole buffer, to ensure bits that exceed the bus_width
141 for (i = 0; i < CFI_MAX_BUS_WIDTH; i++)
144 if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
146 for (i = bank->bus_width; i > 0; i--)
148 *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
153 for (i = 1; i <= bank->bus_width; i++)
155 *cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
160 /* read unsigned 8-bit value from the bank
161 * flash banks are expected to be made of similar chips
162 * the query result should be the same for all
164 static uint8_t cfi_query_u8(flash_bank_t *bank, int sector, uint32_t offset)
166 target_t *target = bank->target;
167 uint8_t data[CFI_MAX_BUS_WIDTH];
169 target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
171 if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
174 return data[bank->bus_width - 1];
177 /* read unsigned 8-bit value from the bank
178 * in case of a bank made of multiple chips,
179 * the individual values are ORed
181 static uint8_t cfi_get_u8(flash_bank_t *bank, int sector, uint32_t offset)
183 target_t *target = bank->target;
184 uint8_t data[CFI_MAX_BUS_WIDTH];
187 target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
189 if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
191 for (i = 0; i < bank->bus_width / bank->chip_width; i++)
199 for (i = 0; i < bank->bus_width / bank->chip_width; i++)
200 value |= data[bank->bus_width - 1 - i];
206 static uint16_t cfi_query_u16(flash_bank_t *bank, int sector, uint32_t offset)
208 target_t *target = bank->target;
209 cfi_flash_bank_t *cfi_info = bank->driver_priv;
210 uint8_t data[CFI_MAX_BUS_WIDTH * 2];
212 if (cfi_info->x16_as_x8)
215 for (i = 0;i < 2;i++)
216 target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1,
217 &data[i*bank->bus_width]);
220 target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 2, data);
222 if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
223 return data[0] | data[bank->bus_width] << 8;
225 return data[bank->bus_width - 1] | data[(2 * bank->bus_width) - 1] << 8;
228 static uint32_t cfi_query_u32(flash_bank_t *bank, int sector, uint32_t offset)
230 target_t *target = bank->target;
231 cfi_flash_bank_t *cfi_info = bank->driver_priv;
232 uint8_t data[CFI_MAX_BUS_WIDTH * 4];
234 if (cfi_info->x16_as_x8)
237 for (i = 0;i < 4;i++)
238 target_read_memory(target, flash_address(bank, sector, offset + i), bank->bus_width, 1,
239 &data[i*bank->bus_width]);
242 target_read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 4, data);
244 if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
245 return data[0] | data[bank->bus_width] << 8 | data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24;
247 return data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
248 data[(3 * bank->bus_width) - 1] << 16 | data[(4 * bank->bus_width) - 1] << 24;
251 static void cfi_intel_clear_status_register(flash_bank_t *bank)
253 target_t *target = bank->target;
256 if (target->state != TARGET_HALTED)
258 LOG_ERROR("BUG: attempted to clear status register while target wasn't halted");
262 cfi_command(bank, 0x50, command);
263 target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
266 uint8_t cfi_intel_wait_status_busy(flash_bank_t *bank, int timeout)
270 while ((!((status = cfi_get_u8(bank, 0, 0x0)) & 0x80)) && (timeout-- > 0))
272 LOG_DEBUG("status: 0x%x", status);
276 /* mask out bit 0 (reserved) */
277 status = status & 0xfe;
279 LOG_DEBUG("status: 0x%x", status);
281 if ((status & 0x80) != 0x80)
283 LOG_ERROR("timeout while waiting for WSM to become ready");
285 else if (status != 0x80)
287 LOG_ERROR("status register: 0x%x", status);
289 LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
291 LOG_ERROR("Program suspended");
293 LOG_ERROR("Low Programming Voltage Detected, Operation Aborted");
295 LOG_ERROR("Program Error / Error in Setting Lock-Bit");
297 LOG_ERROR("Error in Block Erasure or Clear Lock-Bits");
299 LOG_ERROR("Block Erase Suspended");
301 cfi_intel_clear_status_register(bank);
307 int cfi_spansion_wait_status_busy(flash_bank_t *bank, int timeout)
309 uint8_t status, oldstatus;
310 cfi_flash_bank_t *cfi_info = bank->driver_priv;
312 oldstatus = cfi_get_u8(bank, 0, 0x0);
315 status = cfi_get_u8(bank, 0, 0x0);
316 if ((status ^ oldstatus) & 0x40) {
317 if (status & cfi_info->status_poll_mask & 0x20) {
318 oldstatus = cfi_get_u8(bank, 0, 0x0);
319 status = cfi_get_u8(bank, 0, 0x0);
320 if ((status ^ oldstatus) & 0x40) {
321 LOG_ERROR("dq5 timeout, status: 0x%x", status);
322 return(ERROR_FLASH_OPERATION_FAILED);
324 LOG_DEBUG("status: 0x%x", status);
328 } else { /* no toggle: finished, OK */
329 LOG_DEBUG("status: 0x%x", status);
335 } while (timeout-- > 0);
337 LOG_ERROR("timeout, status: 0x%x", status);
339 return(ERROR_FLASH_BUSY);
342 static int cfi_read_intel_pri_ext(flash_bank_t *bank)
345 cfi_flash_bank_t *cfi_info = bank->driver_priv;
346 cfi_intel_pri_ext_t *pri_ext = malloc(sizeof(cfi_intel_pri_ext_t));
347 target_t *target = bank->target;
350 cfi_info->pri_ext = pri_ext;
352 pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
353 pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
354 pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
356 if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
358 cfi_command(bank, 0xf0, command);
359 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
363 cfi_command(bank, 0xff, command);
364 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
368 LOG_ERROR("Could not read bank flash bank information");
369 return ERROR_FLASH_BANK_INVALID;
372 pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
373 pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
375 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
377 pri_ext->feature_support = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5);
378 pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
379 pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
381 LOG_DEBUG("feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x",
382 pri_ext->feature_support,
383 pri_ext->suspend_cmd_support,
384 pri_ext->blk_status_reg_mask);
386 pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
387 pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
389 LOG_DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
390 (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
391 (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
393 pri_ext->num_protection_fields = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe);
394 if (pri_ext->num_protection_fields != 1)
396 LOG_WARNING("expected one protection register field, but found %i", pri_ext->num_protection_fields);
399 pri_ext->prot_reg_addr = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf);
400 pri_ext->fact_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x11);
401 pri_ext->user_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x12);
403 LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
408 static int cfi_read_spansion_pri_ext(flash_bank_t *bank)
411 cfi_flash_bank_t *cfi_info = bank->driver_priv;
412 cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
413 target_t *target = bank->target;
416 cfi_info->pri_ext = pri_ext;
418 pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
419 pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
420 pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
422 if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
424 cfi_command(bank, 0xf0, command);
425 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
429 LOG_ERROR("Could not read spansion bank information");
430 return ERROR_FLASH_BANK_INVALID;
433 pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
434 pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
436 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
438 pri_ext->SiliconRevision = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
439 pri_ext->EraseSuspend = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
440 pri_ext->BlkProt = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
441 pri_ext->TmpBlkUnprotect = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
442 pri_ext->BlkProtUnprot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
443 pri_ext->SimultaneousOps = cfi_query_u8(bank, 0, cfi_info->pri_addr + 10);
444 pri_ext->BurstMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 11);
445 pri_ext->PageMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 12);
446 pri_ext->VppMin = cfi_query_u8(bank, 0, cfi_info->pri_addr + 13);
447 pri_ext->VppMax = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14);
448 pri_ext->TopBottom = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15);
450 LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext->SiliconRevision,
451 pri_ext->EraseSuspend, pri_ext->BlkProt);
453 LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
454 pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
456 LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
459 LOG_DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
460 (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
461 (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
463 LOG_DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
465 /* default values for implementation specific workarounds */
466 pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
467 pri_ext->_unlock2 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock2;
468 pri_ext->_reversed_geometry = 0;
473 static int cfi_read_atmel_pri_ext(flash_bank_t *bank)
476 cfi_atmel_pri_ext_t atmel_pri_ext;
477 cfi_flash_bank_t *cfi_info = bank->driver_priv;
478 cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
479 target_t *target = bank->target;
482 /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
483 * but a different primary extended query table.
484 * We read the atmel table, and prepare a valid AMD/Spansion query table.
487 memset(pri_ext, 0, sizeof(cfi_spansion_pri_ext_t));
489 cfi_info->pri_ext = pri_ext;
491 atmel_pri_ext.pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
492 atmel_pri_ext.pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
493 atmel_pri_ext.pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
495 if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') || (atmel_pri_ext.pri[2] != 'I'))
497 cfi_command(bank, 0xf0, command);
498 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
502 LOG_ERROR("Could not read atmel bank information");
503 return ERROR_FLASH_BANK_INVALID;
506 pri_ext->pri[0] = atmel_pri_ext.pri[0];
507 pri_ext->pri[1] = atmel_pri_ext.pri[1];
508 pri_ext->pri[2] = atmel_pri_ext.pri[2];
510 atmel_pri_ext.major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
511 atmel_pri_ext.minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
513 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
515 pri_ext->major_version = atmel_pri_ext.major_version;
516 pri_ext->minor_version = atmel_pri_ext.minor_version;
518 atmel_pri_ext.features = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
519 atmel_pri_ext.bottom_boot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
520 atmel_pri_ext.burst_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
521 atmel_pri_ext.page_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
523 LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
524 atmel_pri_ext.features, atmel_pri_ext.bottom_boot, atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
526 if (atmel_pri_ext.features & 0x02)
527 pri_ext->EraseSuspend = 2;
529 if (atmel_pri_ext.bottom_boot)
530 pri_ext->TopBottom = 2;
532 pri_ext->TopBottom = 3;
534 pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
535 pri_ext->_unlock2 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock2;
540 static int cfi_read_0002_pri_ext(flash_bank_t *bank)
542 cfi_flash_bank_t *cfi_info = bank->driver_priv;
544 if (cfi_info->manufacturer == CFI_MFR_ATMEL)
546 return cfi_read_atmel_pri_ext(bank);
550 return cfi_read_spansion_pri_ext(bank);
554 static int cfi_spansion_info(struct flash_bank_s *bank, char *buf, int buf_size)
557 cfi_flash_bank_t *cfi_info = bank->driver_priv;
558 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
560 printed = snprintf(buf, buf_size, "\nSpansion primary algorithm extend information:\n");
564 printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
565 pri_ext->pri[1], pri_ext->pri[2],
566 pri_ext->major_version, pri_ext->minor_version);
570 printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
571 (pri_ext->SiliconRevision) >> 2,
572 (pri_ext->SiliconRevision) & 0x03);
576 printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
577 pri_ext->EraseSuspend,
582 printed = snprintf(buf, buf_size, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
583 (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
584 (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
589 static int cfi_intel_info(struct flash_bank_s *bank, char *buf, int buf_size)
592 cfi_flash_bank_t *cfi_info = bank->driver_priv;
593 cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
595 printed = snprintf(buf, buf_size, "\nintel primary algorithm extend information:\n");
599 printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
603 printed = snprintf(buf, buf_size, "feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
607 printed = snprintf(buf, buf_size, "Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x\n",
608 (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
609 (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
613 printed = snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
618 static int cfi_register_commands(struct command_context_s *cmd_ctx)
620 /*command_t *cfi_cmd = */
621 register_command(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
623 register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
624 "print part id of cfi flash bank <num>");
629 /* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
631 static int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
633 cfi_flash_bank_t *cfi_info;
640 LOG_WARNING("incomplete flash_bank cfi configuration");
641 return ERROR_FLASH_BANK_INVALID;
644 if ((strtoul(args[4], NULL, 0) > CFI_MAX_CHIP_WIDTH)
645 || (strtoul(args[3], NULL, 0) > CFI_MAX_BUS_WIDTH))
647 LOG_ERROR("chip and bus width have to specified in bytes");
648 return ERROR_FLASH_BANK_INVALID;
651 cfi_info = malloc(sizeof(cfi_flash_bank_t));
652 cfi_info->probed = 0;
653 bank->driver_priv = cfi_info;
655 cfi_info->write_algorithm = NULL;
657 cfi_info->x16_as_x8 = 0;
658 cfi_info->jedec_probe = 0;
659 cfi_info->not_cfi = 0;
661 for (i = 6; i < argc; i++)
663 if (strcmp(args[i], "x16_as_x8") == 0)
665 cfi_info->x16_as_x8 = 1;
667 else if (strcmp(args[i], "jedec_probe") == 0)
669 cfi_info->jedec_probe = 1;
673 cfi_info->write_algorithm = NULL;
675 /* bank wasn't probed yet */
676 cfi_info->qry[0] = -1;
681 static int cfi_intel_erase(struct flash_bank_s *bank, int first, int last)
684 cfi_flash_bank_t *cfi_info = bank->driver_priv;
685 target_t *target = bank->target;
689 cfi_intel_clear_status_register(bank);
691 for (i = first; i <= last; i++)
693 cfi_command(bank, 0x20, command);
694 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
699 cfi_command(bank, 0xd0, command);
700 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
705 if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == 0x80)
706 bank->sectors[i].is_erased = 1;
709 cfi_command(bank, 0xff, command);
710 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
715 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32 , i, bank->base);
716 return ERROR_FLASH_OPERATION_FAILED;
720 cfi_command(bank, 0xff, command);
721 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
725 static int cfi_spansion_erase(struct flash_bank_s *bank, int first, int last)
728 cfi_flash_bank_t *cfi_info = bank->driver_priv;
729 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
730 target_t *target = bank->target;
734 for (i = first; i <= last; i++)
736 cfi_command(bank, 0xaa, command);
737 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
742 cfi_command(bank, 0x55, command);
743 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
748 cfi_command(bank, 0x80, command);
749 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
754 cfi_command(bank, 0xaa, command);
755 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
760 cfi_command(bank, 0x55, command);
761 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
766 cfi_command(bank, 0x30, command);
767 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
772 if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == ERROR_OK)
773 bank->sectors[i].is_erased = 1;
776 cfi_command(bank, 0xf0, command);
777 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
782 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32, i, bank->base);
783 return ERROR_FLASH_OPERATION_FAILED;
787 cfi_command(bank, 0xf0, command);
788 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
791 static int cfi_erase(struct flash_bank_s *bank, int first, int last)
793 cfi_flash_bank_t *cfi_info = bank->driver_priv;
795 if (bank->target->state != TARGET_HALTED)
797 LOG_ERROR("Target not halted");
798 return ERROR_TARGET_NOT_HALTED;
801 if ((first < 0) || (last < first) || (last >= bank->num_sectors))
803 return ERROR_FLASH_SECTOR_INVALID;
806 if (cfi_info->qry[0] != 'Q')
807 return ERROR_FLASH_BANK_NOT_PROBED;
809 switch (cfi_info->pri_id)
813 return cfi_intel_erase(bank, first, last);
816 return cfi_spansion_erase(bank, first, last);
819 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
826 static int cfi_intel_protect(struct flash_bank_s *bank, int set, int first, int last)
829 cfi_flash_bank_t *cfi_info = bank->driver_priv;
830 cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
831 target_t *target = bank->target;
836 /* if the device supports neither legacy lock/unlock (bit 3) nor
837 * instant individual block locking (bit 5).
839 if (!(pri_ext->feature_support & 0x28))
840 return ERROR_FLASH_OPERATION_FAILED;
842 cfi_intel_clear_status_register(bank);
844 for (i = first; i <= last; i++)
846 cfi_command(bank, 0x60, command);
847 LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
848 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
854 cfi_command(bank, 0x01, command);
855 LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32 , flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
856 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
860 bank->sectors[i].is_protected = 1;
864 cfi_command(bank, 0xd0, command);
865 LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
866 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
870 bank->sectors[i].is_protected = 0;
873 /* instant individual block locking doesn't require reading of the status register */
874 if (!(pri_ext->feature_support & 0x20))
876 /* Clear lock bits operation may take up to 1.4s */
877 cfi_intel_wait_status_busy(bank, 1400);
881 uint8_t block_status;
882 /* read block lock bit, to verify status */
883 cfi_command(bank, 0x90, command);
884 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
888 block_status = cfi_get_u8(bank, i, 0x2);
890 if ((block_status & 0x1) != set)
892 LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
893 cfi_command(bank, 0x70, command);
894 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
898 cfi_intel_wait_status_busy(bank, 10);
901 return ERROR_FLASH_OPERATION_FAILED;
911 /* if the device doesn't support individual block lock bits set/clear,
912 * all blocks have been unlocked in parallel, so we set those that should be protected
914 if ((!set) && (!(pri_ext->feature_support & 0x20)))
916 for (i = 0; i < bank->num_sectors; i++)
918 if (bank->sectors[i].is_protected == 1)
920 cfi_intel_clear_status_register(bank);
922 cfi_command(bank, 0x60, command);
923 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
928 cfi_command(bank, 0x01, command);
929 if ((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
934 cfi_intel_wait_status_busy(bank, 100);
939 cfi_command(bank, 0xff, command);
940 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
943 static int cfi_protect(struct flash_bank_s *bank, int set, int first, int last)
945 cfi_flash_bank_t *cfi_info = bank->driver_priv;
947 if (bank->target->state != TARGET_HALTED)
949 LOG_ERROR("Target not halted");
950 return ERROR_TARGET_NOT_HALTED;
953 if ((first < 0) || (last < first) || (last >= bank->num_sectors))
955 return ERROR_FLASH_SECTOR_INVALID;
958 if (cfi_info->qry[0] != 'Q')
959 return ERROR_FLASH_BANK_NOT_PROBED;
961 switch (cfi_info->pri_id)
965 cfi_intel_protect(bank, set, first, last);
968 LOG_ERROR("protect: cfi primary command set %i unsupported", cfi_info->pri_id);
975 /* FIXME Replace this by a simple memcpy() - still unsure about sideeffects */
976 static void cfi_add_byte(struct flash_bank_s *bank, uint8_t *word, uint8_t byte)
978 /* target_t *target = bank->target; */
983 * The data to flash must not be changed in endian! We write a bytestrem in
984 * target byte order already. Only the control and status byte lane of the flash
985 * WSM is interpreted by the CPU in different ways, when read a uint16_t or uint32_t
986 * word (data seems to be in the upper or lower byte lane for uint16_t accesses).
990 if (target->endianness == TARGET_LITTLE_ENDIAN)
994 for (i = 0; i < bank->bus_width - 1; i++)
995 word[i] = word[i + 1];
996 word[bank->bus_width - 1] = byte;
1002 for (i = bank->bus_width - 1; i > 0; i--)
1003 word[i] = word[i - 1];
1009 /* Convert code image to target endian */
1010 /* FIXME create general block conversion fcts in target.c?) */
1011 static void cfi_fix_code_endian(target_t *target, uint8_t *dest, const uint32_t *src, uint32_t count)
1014 for (i = 0; i< count; i++)
1016 target_buffer_set_u32(target, dest, *src);
1022 static uint32_t cfi_command_val(flash_bank_t *bank, uint8_t cmd)
1024 target_t *target = bank->target;
1026 uint8_t buf[CFI_MAX_BUS_WIDTH];
1027 cfi_command(bank, cmd, buf);
1028 switch (bank->bus_width)
1034 return target_buffer_get_u16(target, buf);
1037 return target_buffer_get_u32(target, buf);
1040 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
1045 static int cfi_intel_write_block(struct flash_bank_s *bank, uint8_t *buffer, uint32_t address, uint32_t count)
1047 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1048 target_t *target = bank->target;
1049 reg_param_t reg_params[7];
1050 armv4_5_algorithm_t armv4_5_info;
1051 working_area_t *source;
1052 uint32_t buffer_size = 32768;
1053 uint32_t write_command_val, busy_pattern_val, error_pattern_val;
1055 /* algorithm register usage:
1056 * r0: source address (in RAM)
1057 * r1: target address (in Flash)
1059 * r3: flash write command
1060 * r4: status byte (returned to host)
1061 * r5: busy test pattern
1062 * r6: error test pattern
1065 static const uint32_t word_32_code[] = {
1066 0xe4904004, /* loop: ldr r4, [r0], #4 */
1067 0xe5813000, /* str r3, [r1] */
1068 0xe5814000, /* str r4, [r1] */
1069 0xe5914000, /* busy: ldr r4, [r1] */
1070 0xe0047005, /* and r7, r4, r5 */
1071 0xe1570005, /* cmp r7, r5 */
1072 0x1afffffb, /* bne busy */
1073 0xe1140006, /* tst r4, r6 */
1074 0x1a000003, /* bne done */
1075 0xe2522001, /* subs r2, r2, #1 */
1076 0x0a000001, /* beq done */
1077 0xe2811004, /* add r1, r1 #4 */
1078 0xeafffff2, /* b loop */
1079 0xeafffffe /* done: b -2 */
1082 static const uint32_t word_16_code[] = {
1083 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
1084 0xe1c130b0, /* strh r3, [r1] */
1085 0xe1c140b0, /* strh r4, [r1] */
1086 0xe1d140b0, /* busy ldrh r4, [r1] */
1087 0xe0047005, /* and r7, r4, r5 */
1088 0xe1570005, /* cmp r7, r5 */
1089 0x1afffffb, /* bne busy */
1090 0xe1140006, /* tst r4, r6 */
1091 0x1a000003, /* bne done */
1092 0xe2522001, /* subs r2, r2, #1 */
1093 0x0a000001, /* beq done */
1094 0xe2811002, /* add r1, r1 #2 */
1095 0xeafffff2, /* b loop */
1096 0xeafffffe /* done: b -2 */
1099 static const uint32_t word_8_code[] = {
1100 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
1101 0xe5c13000, /* strb r3, [r1] */
1102 0xe5c14000, /* strb r4, [r1] */
1103 0xe5d14000, /* busy ldrb r4, [r1] */
1104 0xe0047005, /* and r7, r4, r5 */
1105 0xe1570005, /* cmp r7, r5 */
1106 0x1afffffb, /* bne busy */
1107 0xe1140006, /* tst r4, r6 */
1108 0x1a000003, /* bne done */
1109 0xe2522001, /* subs r2, r2, #1 */
1110 0x0a000001, /* beq done */
1111 0xe2811001, /* add r1, r1 #1 */
1112 0xeafffff2, /* b loop */
1113 0xeafffffe /* done: b -2 */
1115 uint8_t target_code[4*CFI_MAX_INTEL_CODESIZE];
1116 const uint32_t *target_code_src;
1117 uint32_t target_code_size;
1118 int retval = ERROR_OK;
1121 cfi_intel_clear_status_register(bank);
1123 armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
1124 armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
1125 armv4_5_info.core_state = ARMV4_5_STATE_ARM;
1127 /* If we are setting up the write_algorith, we need target_code_src */
1128 /* if not we only need target_code_size. */
1130 /* However, we don't want to create multiple code paths, so we */
1131 /* do the unecessary evaluation of target_code_src, which the */
1132 /* compiler will probably nicely optimize away if not needed */
1134 /* prepare algorithm code for target endian */
1135 switch (bank->bus_width)
1138 target_code_src = word_8_code;
1139 target_code_size = sizeof(word_8_code);
1142 target_code_src = word_16_code;
1143 target_code_size = sizeof(word_16_code);
1146 target_code_src = word_32_code;
1147 target_code_size = sizeof(word_32_code);
1150 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
1151 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1154 /* flash write code */
1155 if (!cfi_info->write_algorithm)
1157 if (target_code_size > sizeof(target_code))
1159 LOG_WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
1160 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1162 cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4);
1164 /* Get memory for block write handler */
1165 retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm);
1166 if (retval != ERROR_OK)
1168 LOG_WARNING("No working area available, can't do block memory writes");
1169 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1172 /* write algorithm code to working area */
1173 retval = target_write_buffer(target, cfi_info->write_algorithm->address, target_code_size, target_code);
1174 if (retval != ERROR_OK)
1176 LOG_ERROR("Unable to write block write code to target");
1181 /* Get a workspace buffer for the data to flash starting with 32k size.
1182 Half size until buffer would be smaller 256 Bytem then fail back */
1183 /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
1184 while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
1187 if (buffer_size <= 256)
1189 LOG_WARNING("no large enough working area available, can't do block memory writes");
1190 retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1195 /* setup algo registers */
1196 init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
1197 init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
1198 init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
1199 init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
1200 init_reg_param(®_params[4], "r4", 32, PARAM_IN);
1201 init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
1202 init_reg_param(®_params[6], "r6", 32, PARAM_OUT);
1204 /* prepare command and status register patterns */
1205 write_command_val = cfi_command_val(bank, 0x40);
1206 busy_pattern_val = cfi_command_val(bank, 0x80);
1207 error_pattern_val = cfi_command_val(bank, 0x7e);
1209 LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
1211 /* Programming main loop */
1214 uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
1217 if ((retval = target_write_buffer(target, source->address, thisrun_count, buffer)) != ERROR_OK)
1222 buf_set_u32(reg_params[0].value, 0, 32, source->address);
1223 buf_set_u32(reg_params[1].value, 0, 32, address);
1224 buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
1226 buf_set_u32(reg_params[3].value, 0, 32, write_command_val);
1227 buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
1228 buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
1230 LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
1232 /* Execute algorithm, assume breakpoint for last instruction */
1233 retval = target_run_algorithm(target, 0, NULL, 7, reg_params,
1234 cfi_info->write_algorithm->address,
1235 cfi_info->write_algorithm->address + target_code_size - sizeof(uint32_t),
1236 10000, /* 10s should be enough for max. 32k of data */
1239 /* On failure try a fall back to direct word writes */
1240 if (retval != ERROR_OK)
1242 cfi_intel_clear_status_register(bank);
1243 LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
1244 retval = ERROR_FLASH_OPERATION_FAILED;
1245 /* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
1246 /* FIXME To allow fall back or recovery, we must save the actual status
1247 somewhere, so that a higher level code can start recovery. */
1251 /* Check return value from algo code */
1252 wsm_error = buf_get_u32(reg_params[4].value, 0, 32) & error_pattern_val;
1255 /* read status register (outputs debug inforation) */
1256 cfi_intel_wait_status_busy(bank, 100);
1257 cfi_intel_clear_status_register(bank);
1258 retval = ERROR_FLASH_OPERATION_FAILED;
1262 buffer += thisrun_count;
1263 address += thisrun_count;
1264 count -= thisrun_count;
1267 /* free up resources */
1270 target_free_working_area(target, source);
1272 if (cfi_info->write_algorithm)
1274 target_free_working_area(target, cfi_info->write_algorithm);
1275 cfi_info->write_algorithm = NULL;
1278 destroy_reg_param(®_params[0]);
1279 destroy_reg_param(®_params[1]);
1280 destroy_reg_param(®_params[2]);
1281 destroy_reg_param(®_params[3]);
1282 destroy_reg_param(®_params[4]);
1283 destroy_reg_param(®_params[5]);
1284 destroy_reg_param(®_params[6]);
1289 static int cfi_spansion_write_block(struct flash_bank_s *bank, uint8_t *buffer, uint32_t address, uint32_t count)
1291 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1292 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
1293 target_t *target = bank->target;
1294 reg_param_t reg_params[10];
1295 armv4_5_algorithm_t armv4_5_info;
1296 working_area_t *source;
1297 uint32_t buffer_size = 32768;
1299 int retval, retvaltemp;
1300 int exit_code = ERROR_OK;
1302 /* input parameters - */
1303 /* R0 = source address */
1304 /* R1 = destination address */
1305 /* R2 = number of writes */
1306 /* R3 = flash write command */
1307 /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
1308 /* output parameters - */
1309 /* R5 = 0x80 ok 0x00 bad */
1310 /* temp registers - */
1311 /* R6 = value read from flash to test status */
1312 /* R7 = holding register */
1313 /* unlock registers - */
1314 /* R8 = unlock1_addr */
1315 /* R9 = unlock1_cmd */
1316 /* R10 = unlock2_addr */
1317 /* R11 = unlock2_cmd */
1319 static const uint32_t word_32_code[] = {
1320 /* 00008100 <sp_32_code>: */
1321 0xe4905004, /* ldr r5, [r0], #4 */
1322 0xe5889000, /* str r9, [r8] */
1323 0xe58ab000, /* str r11, [r10] */
1324 0xe5883000, /* str r3, [r8] */
1325 0xe5815000, /* str r5, [r1] */
1326 0xe1a00000, /* nop */
1328 /* 00008110 <sp_32_busy>: */
1329 0xe5916000, /* ldr r6, [r1] */
1330 0xe0257006, /* eor r7, r5, r6 */
1331 0xe0147007, /* ands r7, r4, r7 */
1332 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1333 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1334 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
1335 0xe5916000, /* ldr r6, [r1] */
1336 0xe0257006, /* eor r7, r5, r6 */
1337 0xe0147007, /* ands r7, r4, r7 */
1338 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1339 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
1340 0x1a000004, /* bne 8154 <sp_32_done> */
1342 /* 00008140 <sp_32_cont>: */
1343 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1344 0x03a05080, /* moveq r5, #128 ; 0x80 */
1345 0x0a000001, /* beq 8154 <sp_32_done> */
1346 0xe2811004, /* add r1, r1, #4 ; 0x4 */
1347 0xeaffffe8, /* b 8100 <sp_32_code> */
1349 /* 00008154 <sp_32_done>: */
1350 0xeafffffe /* b 8154 <sp_32_done> */
1353 static const uint32_t word_16_code[] = {
1354 /* 00008158 <sp_16_code>: */
1355 0xe0d050b2, /* ldrh r5, [r0], #2 */
1356 0xe1c890b0, /* strh r9, [r8] */
1357 0xe1cab0b0, /* strh r11, [r10] */
1358 0xe1c830b0, /* strh r3, [r8] */
1359 0xe1c150b0, /* strh r5, [r1] */
1360 0xe1a00000, /* nop (mov r0,r0) */
1362 /* 00008168 <sp_16_busy>: */
1363 0xe1d160b0, /* ldrh r6, [r1] */
1364 0xe0257006, /* eor r7, r5, r6 */
1365 0xe0147007, /* ands r7, r4, r7 */
1366 0x0a000007, /* beq 8198 <sp_16_cont> */
1367 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1368 0x0afffff9, /* beq 8168 <sp_16_busy> */
1369 0xe1d160b0, /* ldrh r6, [r1] */
1370 0xe0257006, /* eor r7, r5, r6 */
1371 0xe0147007, /* ands r7, r4, r7 */
1372 0x0a000001, /* beq 8198 <sp_16_cont> */
1373 0xe3a05000, /* mov r5, #0 ; 0x0 */
1374 0x1a000004, /* bne 81ac <sp_16_done> */
1376 /* 00008198 <sp_16_cont>: */
1377 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1378 0x03a05080, /* moveq r5, #128 ; 0x80 */
1379 0x0a000001, /* beq 81ac <sp_16_done> */
1380 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1381 0xeaffffe8, /* b 8158 <sp_16_code> */
1383 /* 000081ac <sp_16_done>: */
1384 0xeafffffe /* b 81ac <sp_16_done> */
1387 static const uint32_t word_16_code_dq7only[] = {
1389 0xe0d050b2, /* ldrh r5, [r0], #2 */
1390 0xe1c890b0, /* strh r9, [r8] */
1391 0xe1cab0b0, /* strh r11, [r10] */
1392 0xe1c830b0, /* strh r3, [r8] */
1393 0xe1c150b0, /* strh r5, [r1] */
1394 0xe1a00000, /* nop (mov r0,r0) */
1397 0xe1d160b0, /* ldrh r6, [r1] */
1398 0xe0257006, /* eor r7, r5, r6 */
1399 0xe2177080, /* ands r7, #0x80 */
1400 0x1afffffb, /* bne 8168 <sp_16_busy> */
1402 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1403 0x03a05080, /* moveq r5, #128 ; 0x80 */
1404 0x0a000001, /* beq 81ac <sp_16_done> */
1405 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1406 0xeafffff0, /* b 8158 <sp_16_code> */
1408 /* 000081ac <sp_16_done>: */
1409 0xeafffffe /* b 81ac <sp_16_done> */
1412 static const uint32_t word_8_code[] = {
1413 /* 000081b0 <sp_16_code_end>: */
1414 0xe4d05001, /* ldrb r5, [r0], #1 */
1415 0xe5c89000, /* strb r9, [r8] */
1416 0xe5cab000, /* strb r11, [r10] */
1417 0xe5c83000, /* strb r3, [r8] */
1418 0xe5c15000, /* strb r5, [r1] */
1419 0xe1a00000, /* nop (mov r0,r0) */
1421 /* 000081c0 <sp_8_busy>: */
1422 0xe5d16000, /* ldrb r6, [r1] */
1423 0xe0257006, /* eor r7, r5, r6 */
1424 0xe0147007, /* ands r7, r4, r7 */
1425 0x0a000007, /* beq 81f0 <sp_8_cont> */
1426 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1427 0x0afffff9, /* beq 81c0 <sp_8_busy> */
1428 0xe5d16000, /* ldrb r6, [r1] */
1429 0xe0257006, /* eor r7, r5, r6 */
1430 0xe0147007, /* ands r7, r4, r7 */
1431 0x0a000001, /* beq 81f0 <sp_8_cont> */
1432 0xe3a05000, /* mov r5, #0 ; 0x0 */
1433 0x1a000004, /* bne 8204 <sp_8_done> */
1435 /* 000081f0 <sp_8_cont>: */
1436 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1437 0x03a05080, /* moveq r5, #128 ; 0x80 */
1438 0x0a000001, /* beq 8204 <sp_8_done> */
1439 0xe2811001, /* add r1, r1, #1 ; 0x1 */
1440 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
1442 /* 00008204 <sp_8_done>: */
1443 0xeafffffe /* b 8204 <sp_8_done> */
1446 armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
1447 armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
1448 armv4_5_info.core_state = ARMV4_5_STATE_ARM;
1450 /* flash write code */
1451 int target_code_size = 0;
1452 if (!cfi_info->write_algorithm)
1454 uint8_t *target_code;
1455 const uint32_t *src;
1457 /* convert bus-width dependent algorithm code to correct endiannes */
1458 switch (bank->bus_width)
1462 target_code_size = sizeof(word_8_code);
1465 /* Check for DQ5 support */
1466 if( cfi_info->status_poll_mask & (1 << 5) )
1469 target_code_size = sizeof(word_16_code);
1473 /* No DQ5 support. Use DQ7 DATA# polling only. */
1474 src = word_16_code_dq7only;
1475 target_code_size = sizeof(word_16_code_dq7only);
1480 target_code_size = sizeof(word_32_code);
1483 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
1484 return ERROR_FLASH_OPERATION_FAILED;
1486 target_code = malloc(target_code_size);
1487 cfi_fix_code_endian(target, target_code, src, target_code_size / 4);
1489 /* allocate working area */
1490 retval = target_alloc_working_area(target, target_code_size,
1491 &cfi_info->write_algorithm);
1492 if (retval != ERROR_OK)
1498 /* write algorithm code to working area */
1499 if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address,
1500 target_code_size, target_code)) != ERROR_OK)
1508 /* the following code still assumes target code is fixed 24*4 bytes */
1510 while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
1513 if (buffer_size <= 256)
1515 /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
1516 if (cfi_info->write_algorithm)
1517 target_free_working_area(target, cfi_info->write_algorithm);
1519 LOG_WARNING("not enough working area available, can't do block memory writes");
1520 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1524 init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
1525 init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
1526 init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
1527 init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
1528 init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
1529 init_reg_param(®_params[5], "r5", 32, PARAM_IN);
1530 init_reg_param(®_params[6], "r8", 32, PARAM_OUT);
1531 init_reg_param(®_params[7], "r9", 32, PARAM_OUT);
1532 init_reg_param(®_params[8], "r10", 32, PARAM_OUT);
1533 init_reg_param(®_params[9], "r11", 32, PARAM_OUT);
1537 uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
1539 retvaltemp = target_write_buffer(target, source->address, thisrun_count, buffer);
1541 buf_set_u32(reg_params[0].value, 0, 32, source->address);
1542 buf_set_u32(reg_params[1].value, 0, 32, address);
1543 buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
1544 buf_set_u32(reg_params[3].value, 0, 32, cfi_command_val(bank, 0xA0));
1545 buf_set_u32(reg_params[4].value, 0, 32, cfi_command_val(bank, 0x80));
1546 buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock1));
1547 buf_set_u32(reg_params[7].value, 0, 32, 0xaaaaaaaa);
1548 buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2));
1549 buf_set_u32(reg_params[9].value, 0, 32, 0x55555555);
1551 retval = target_run_algorithm(target, 0, NULL, 10, reg_params,
1552 cfi_info->write_algorithm->address,
1553 cfi_info->write_algorithm->address + ((target_code_size) - 4),
1554 10000, &armv4_5_info);
1556 status = buf_get_u32(reg_params[5].value, 0, 32);
1558 if ((retval != ERROR_OK) || (retvaltemp != ERROR_OK) || status != 0x80)
1560 LOG_DEBUG("status: 0x%" PRIx32 , status);
1561 exit_code = ERROR_FLASH_OPERATION_FAILED;
1565 buffer += thisrun_count;
1566 address += thisrun_count;
1567 count -= thisrun_count;
1570 target_free_all_working_areas(target);
1572 destroy_reg_param(®_params[0]);
1573 destroy_reg_param(®_params[1]);
1574 destroy_reg_param(®_params[2]);
1575 destroy_reg_param(®_params[3]);
1576 destroy_reg_param(®_params[4]);
1577 destroy_reg_param(®_params[5]);
1578 destroy_reg_param(®_params[6]);
1579 destroy_reg_param(®_params[7]);
1580 destroy_reg_param(®_params[8]);
1581 destroy_reg_param(®_params[9]);
1586 static int cfi_intel_write_word(struct flash_bank_s *bank, uint8_t *word, uint32_t address)
1589 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1590 target_t *target = bank->target;
1593 cfi_intel_clear_status_register(bank);
1594 cfi_command(bank, 0x40, command);
1595 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1600 if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
1605 if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != 0x80)
1607 cfi_command(bank, 0xff, command);
1608 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
1613 LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
1614 return ERROR_FLASH_OPERATION_FAILED;
1620 static int cfi_intel_write_words(struct flash_bank_s *bank, uint8_t *word, uint32_t wordcount, uint32_t address)
1623 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1624 target_t *target = bank->target;
1627 /* Calculate buffer size and boundary mask */
1628 uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
1629 uint32_t buffermask = buffersize-1;
1630 uint32_t bufferwsize;
1632 /* Check for valid range */
1633 if (address & buffermask)
1635 LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary",
1636 bank->base, address, cfi_info->max_buf_write_size);
1637 return ERROR_FLASH_OPERATION_FAILED;
1639 switch (bank->chip_width)
1641 case 4 : bufferwsize = buffersize / 4; break;
1642 case 2 : bufferwsize = buffersize / 2; break;
1643 case 1 : bufferwsize = buffersize; break;
1645 LOG_ERROR("Unsupported chip width %d", bank->chip_width);
1646 return ERROR_FLASH_OPERATION_FAILED;
1649 bufferwsize/=(bank->bus_width / bank->chip_width);
1652 /* Check for valid size */
1653 if (wordcount > bufferwsize)
1655 LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32 , wordcount, buffersize);
1656 return ERROR_FLASH_OPERATION_FAILED;
1659 /* Write to flash buffer */
1660 cfi_intel_clear_status_register(bank);
1662 /* Initiate buffer operation _*/
1663 cfi_command(bank, 0xE8, command);
1664 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1668 if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
1670 cfi_command(bank, 0xff, command);
1671 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
1676 LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
1677 return ERROR_FLASH_OPERATION_FAILED;
1680 /* Write buffer wordcount-1 and data words */
1681 cfi_command(bank, bufferwsize-1, command);
1682 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1687 if ((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
1692 /* Commit write operation */
1693 cfi_command(bank, 0xd0, command);
1694 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1698 if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
1700 cfi_command(bank, 0xff, command);
1701 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
1706 LOG_ERROR("Buffer write at base 0x%" PRIx32 ", address %" PRIx32 " failed.", bank->base, address);
1707 return ERROR_FLASH_OPERATION_FAILED;
1713 static int cfi_spansion_write_word(struct flash_bank_s *bank, uint8_t *word, uint32_t address)
1716 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1717 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
1718 target_t *target = bank->target;
1721 cfi_command(bank, 0xaa, command);
1722 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
1727 cfi_command(bank, 0x55, command);
1728 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
1733 cfi_command(bank, 0xa0, command);
1734 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
1739 if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
1744 if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
1746 cfi_command(bank, 0xf0, command);
1747 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
1752 LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
1753 return ERROR_FLASH_OPERATION_FAILED;
1759 static int cfi_spansion_write_words(struct flash_bank_s *bank, uint8_t *word, uint32_t wordcount, uint32_t address)
1762 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1763 target_t *target = bank->target;
1765 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
1767 /* Calculate buffer size and boundary mask */
1768 uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
1769 uint32_t buffermask = buffersize-1;
1770 uint32_t bufferwsize;
1772 /* Check for valid range */
1773 if (address & buffermask)
1775 LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
1776 return ERROR_FLASH_OPERATION_FAILED;
1778 switch (bank->chip_width)
1780 case 4 : bufferwsize = buffersize / 4; break;
1781 case 2 : bufferwsize = buffersize / 2; break;
1782 case 1 : bufferwsize = buffersize; break;
1784 LOG_ERROR("Unsupported chip width %d", bank->chip_width);
1785 return ERROR_FLASH_OPERATION_FAILED;
1788 bufferwsize/=(bank->bus_width / bank->chip_width);
1790 /* Check for valid size */
1791 if (wordcount > bufferwsize)
1793 LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32, wordcount, buffersize);
1794 return ERROR_FLASH_OPERATION_FAILED;
1798 cfi_command(bank, 0xaa, command);
1799 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
1804 cfi_command(bank, 0x55, command);
1805 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
1810 // Buffer load command
1811 cfi_command(bank, 0x25, command);
1812 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1817 /* Write buffer wordcount-1 and data words */
1818 cfi_command(bank, bufferwsize-1, command);
1819 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1824 if ((retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
1829 /* Commit write operation */
1830 cfi_command(bank, 0x29, command);
1831 if ((retval = target_write_memory(target, address, bank->bus_width, 1, command)) != ERROR_OK)
1836 if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
1838 cfi_command(bank, 0xf0, command);
1839 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
1844 LOG_ERROR("couldn't write block at base 0x%" PRIx32 ", address %" PRIx32 ", size %" PRIx32 , bank->base, address, bufferwsize);
1845 return ERROR_FLASH_OPERATION_FAILED;
1851 static int cfi_write_word(struct flash_bank_s *bank, uint8_t *word, uint32_t address)
1853 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1855 switch (cfi_info->pri_id)
1859 return cfi_intel_write_word(bank, word, address);
1862 return cfi_spansion_write_word(bank, word, address);
1865 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
1869 return ERROR_FLASH_OPERATION_FAILED;
1872 static int cfi_write_words(struct flash_bank_s *bank, uint8_t *word, uint32_t wordcount, uint32_t address)
1874 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1876 switch (cfi_info->pri_id)
1880 return cfi_intel_write_words(bank, word, wordcount, address);
1883 return cfi_spansion_write_words(bank, word, wordcount, address);
1886 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
1890 return ERROR_FLASH_OPERATION_FAILED;
1893 int cfi_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
1895 cfi_flash_bank_t *cfi_info = bank->driver_priv;
1896 target_t *target = bank->target;
1897 uint32_t address = bank->base + offset; /* address of first byte to be programmed */
1898 uint32_t write_p, copy_p;
1899 int align; /* number of unaligned bytes */
1900 int blk_count; /* number of bus_width bytes for block copy */
1901 uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being programmed */
1905 if (bank->target->state != TARGET_HALTED)
1907 LOG_ERROR("Target not halted");
1908 return ERROR_TARGET_NOT_HALTED;
1911 if (offset + count > bank->size)
1912 return ERROR_FLASH_DST_OUT_OF_BANK;
1914 if (cfi_info->qry[0] != 'Q')
1915 return ERROR_FLASH_BANK_NOT_PROBED;
1917 /* start at the first byte of the first word (bus_width size) */
1918 write_p = address & ~(bank->bus_width - 1);
1919 if ((align = address - write_p) != 0)
1921 LOG_INFO("Fixup %d unaligned head bytes", align);
1923 for (i = 0; i < bank->bus_width; i++)
1924 current_word[i] = 0;
1927 /* copy bytes before the first write address */
1928 for (i = 0; i < align; ++i, ++copy_p)
1931 if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
1935 cfi_add_byte(bank, current_word, byte);
1938 /* add bytes from the buffer */
1939 for (; (i < bank->bus_width) && (count > 0); i++)
1941 cfi_add_byte(bank, current_word, *buffer++);
1946 /* if the buffer is already finished, copy bytes after the last write address */
1947 for (; (count == 0) && (i < bank->bus_width); ++i, ++copy_p)
1950 if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
1954 cfi_add_byte(bank, current_word, byte);
1957 retval = cfi_write_word(bank, current_word, write_p);
1958 if (retval != ERROR_OK)
1963 /* handle blocks of bus_size aligned bytes */
1964 blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
1965 switch (cfi_info->pri_id)
1967 /* try block writes (fails without working area) */
1970 retval = cfi_intel_write_block(bank, buffer, write_p, blk_count);
1973 retval = cfi_spansion_write_block(bank, buffer, write_p, blk_count);
1976 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
1977 retval = ERROR_FLASH_OPERATION_FAILED;
1980 if (retval == ERROR_OK)
1982 /* Increment pointers and decrease count on succesful block write */
1983 buffer += blk_count;
1984 write_p += blk_count;
1989 if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
1991 //adjust buffersize for chip width
1992 uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
1993 uint32_t buffermask = buffersize-1;
1994 uint32_t bufferwsize;
1996 switch (bank->chip_width)
1998 case 4 : bufferwsize = buffersize / 4; break;
1999 case 2 : bufferwsize = buffersize / 2; break;
2000 case 1 : bufferwsize = buffersize; break;
2002 LOG_ERROR("Unsupported chip width %d", bank->chip_width);
2003 return ERROR_FLASH_OPERATION_FAILED;
2006 bufferwsize/=(bank->bus_width / bank->chip_width);
2008 /* fall back to memory writes */
2009 while (count >= (uint32_t)bank->bus_width)
2012 if ((write_p & 0xff) == 0)
2014 LOG_INFO("Programming at %08" PRIx32 ", count %08" PRIx32 " bytes remaining", write_p, count);
2017 if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask))
2019 retval = cfi_write_words(bank, buffer, bufferwsize, write_p);
2020 if (retval == ERROR_OK)
2022 buffer += buffersize;
2023 write_p += buffersize;
2024 count -= buffersize;
2028 /* try the slow way? */
2031 for (i = 0; i < bank->bus_width; i++)
2032 current_word[i] = 0;
2034 for (i = 0; i < bank->bus_width; i++)
2036 cfi_add_byte(bank, current_word, *buffer++);
2039 retval = cfi_write_word(bank, current_word, write_p);
2040 if (retval != ERROR_OK)
2043 write_p += bank->bus_width;
2044 count -= bank->bus_width;
2052 /* return to read array mode, so we can read from flash again for padding */
2053 cfi_command(bank, 0xf0, current_word);
2054 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
2058 cfi_command(bank, 0xff, current_word);
2059 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
2064 /* handle unaligned tail bytes */
2067 LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count);
2070 for (i = 0; i < bank->bus_width; i++)
2071 current_word[i] = 0;
2073 for (i = 0; (i < bank->bus_width) && (count > 0); ++i, ++copy_p)
2075 cfi_add_byte(bank, current_word, *buffer++);
2078 for (; i < bank->bus_width; ++i, ++copy_p)
2081 if ((retval = target_read_memory(target, copy_p, 1, 1, &byte)) != ERROR_OK)
2085 cfi_add_byte(bank, current_word, byte);
2087 retval = cfi_write_word(bank, current_word, write_p);
2088 if (retval != ERROR_OK)
2092 /* return to read array mode */
2093 cfi_command(bank, 0xf0, current_word);
2094 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word)) != ERROR_OK)
2098 cfi_command(bank, 0xff, current_word);
2099 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
2102 static void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *bank, void *param)
2105 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2106 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
2108 pri_ext->_reversed_geometry = 1;
2111 static void cfi_fixup_0002_erase_regions(flash_bank_t *bank, void *param)
2114 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2115 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
2118 if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
2120 LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
2122 for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
2124 int j = (cfi_info->num_erase_regions - 1) - i;
2127 swap = cfi_info->erase_region_info[i];
2128 cfi_info->erase_region_info[i] = cfi_info->erase_region_info[j];
2129 cfi_info->erase_region_info[j] = swap;
2134 static void cfi_fixup_0002_unlock_addresses(flash_bank_t *bank, void *param)
2136 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2137 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
2138 cfi_unlock_addresses_t *unlock_addresses = param;
2140 pri_ext->_unlock1 = unlock_addresses->unlock1;
2141 pri_ext->_unlock2 = unlock_addresses->unlock2;
2144 static int cfi_probe(struct flash_bank_s *bank)
2146 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2147 target_t *target = bank->target;
2149 int num_sectors = 0;
2152 uint32_t unlock1 = 0x555;
2153 uint32_t unlock2 = 0x2aa;
2156 if (bank->target->state != TARGET_HALTED)
2158 LOG_ERROR("Target not halted");
2159 return ERROR_TARGET_NOT_HALTED;
2162 cfi_info->probed = 0;
2164 /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
2165 * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
2167 if (cfi_info->jedec_probe)
2173 /* switch to read identifier codes mode ("AUTOSELECT") */
2174 cfi_command(bank, 0xaa, command);
2175 if ((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
2179 cfi_command(bank, 0x55, command);
2180 if ((retval = target_write_memory(target, flash_address(bank, 0, unlock2), bank->bus_width, 1, command)) != ERROR_OK)
2184 cfi_command(bank, 0x90, command);
2185 if ((retval = target_write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command)) != ERROR_OK)
2190 if (bank->chip_width == 1)
2192 uint8_t manufacturer, device_id;
2193 if ((retval = target_read_u8(target, flash_address(bank, 0, 0x00), &manufacturer)) != ERROR_OK)
2197 if ((retval = target_read_u8(target, flash_address(bank, 0, 0x01), &device_id)) != ERROR_OK)
2201 cfi_info->manufacturer = manufacturer;
2202 cfi_info->device_id = device_id;
2204 else if (bank->chip_width == 2)
2206 if ((retval = target_read_u16(target, flash_address(bank, 0, 0x00), &cfi_info->manufacturer)) != ERROR_OK)
2210 if ((retval = target_read_u16(target, flash_address(bank, 0, 0x01), &cfi_info->device_id)) != ERROR_OK)
2216 LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x", cfi_info->manufacturer, cfi_info->device_id);
2217 /* switch back to read array mode */
2218 cfi_command(bank, 0xf0, command);
2219 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
2223 cfi_command(bank, 0xff, command);
2224 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command)) != ERROR_OK)
2229 /* check device/manufacturer ID for known non-CFI flashes. */
2230 cfi_fixup_non_cfi(bank);
2232 /* query only if this is a CFI compatible flash,
2233 * otherwise the relevant info has already been filled in
2235 if (cfi_info->not_cfi == 0)
2237 /* enter CFI query mode
2238 * according to JEDEC Standard No. 68.01,
2239 * a single bus sequence with address = 0x55, data = 0x98 should put
2240 * the device into CFI query mode.
2242 * SST flashes clearly violate this, and we will consider them incompatbile for now
2244 cfi_command(bank, 0x98, command);
2245 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
2250 cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
2251 cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
2252 cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
2254 LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
2256 if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
2258 cfi_command(bank, 0xf0, command);
2259 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
2263 cfi_command(bank, 0xff, command);
2264 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
2268 LOG_ERROR("Could not probe bank: no QRY");
2269 return ERROR_FLASH_BANK_INVALID;
2272 cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
2273 cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
2274 cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
2275 cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
2277 LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
2279 cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
2280 cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
2281 cfi_info->vpp_min = cfi_query_u8(bank, 0, 0x1d);
2282 cfi_info->vpp_max = cfi_query_u8(bank, 0, 0x1e);
2283 cfi_info->word_write_timeout_typ = cfi_query_u8(bank, 0, 0x1f);
2284 cfi_info->buf_write_timeout_typ = cfi_query_u8(bank, 0, 0x20);
2285 cfi_info->block_erase_timeout_typ = cfi_query_u8(bank, 0, 0x21);
2286 cfi_info->chip_erase_timeout_typ = cfi_query_u8(bank, 0, 0x22);
2287 cfi_info->word_write_timeout_max = cfi_query_u8(bank, 0, 0x23);
2288 cfi_info->buf_write_timeout_max = cfi_query_u8(bank, 0, 0x24);
2289 cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
2290 cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
2292 LOG_DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
2293 (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
2294 (cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
2295 (cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
2296 (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
2297 LOG_DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
2298 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
2299 LOG_DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
2300 (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
2301 (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
2302 (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
2304 cfi_info->dev_size = 1 << cfi_query_u8(bank, 0, 0x27);
2305 cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
2306 cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
2307 cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
2309 LOG_DEBUG("size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
2311 if (cfi_info->num_erase_regions)
2313 cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
2314 for (i = 0; i < cfi_info->num_erase_regions; i++)
2316 cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
2317 LOG_DEBUG("erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "",
2319 (cfi_info->erase_region_info[i] & 0xffff) + 1,
2320 (cfi_info->erase_region_info[i] >> 16) * 256);
2325 cfi_info->erase_region_info = NULL;
2328 /* We need to read the primary algorithm extended query table before calculating
2329 * the sector layout to be able to apply fixups
2331 switch (cfi_info->pri_id)
2333 /* Intel command set (standard and extended) */
2336 cfi_read_intel_pri_ext(bank);
2338 /* AMD/Spansion, Atmel, ... command set */
2340 cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /* default for all CFI flashs */
2341 cfi_read_0002_pri_ext(bank);
2344 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
2348 /* return to read array mode
2349 * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
2351 cfi_command(bank, 0xf0, command);
2352 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
2356 cfi_command(bank, 0xff, command);
2357 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
2361 } /* end CFI case */
2363 /* apply fixups depending on the primary command set */
2364 switch (cfi_info->pri_id)
2366 /* Intel command set (standard and extended) */
2369 cfi_fixup(bank, cfi_0001_fixups);
2371 /* AMD/Spansion, Atmel, ... command set */
2373 cfi_fixup(bank, cfi_0002_fixups);
2376 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
2380 if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size)
2382 LOG_WARNING("configuration specifies 0x%" PRIx32 " size, but a 0x%" PRIx32 " size flash was found", bank->size, cfi_info->dev_size);
2385 if (cfi_info->num_erase_regions == 0)
2387 /* a device might have only one erase block, spanning the whole device */
2388 bank->num_sectors = 1;
2389 bank->sectors = malloc(sizeof(flash_sector_t));
2391 bank->sectors[sector].offset = 0x0;
2392 bank->sectors[sector].size = bank->size;
2393 bank->sectors[sector].is_erased = -1;
2394 bank->sectors[sector].is_protected = -1;
2398 uint32_t offset = 0;
2400 for (i = 0; i < cfi_info->num_erase_regions; i++)
2402 num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
2405 bank->num_sectors = num_sectors;
2406 bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
2408 for (i = 0; i < cfi_info->num_erase_regions; i++)
2411 for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++)
2413 bank->sectors[sector].offset = offset;
2414 bank->sectors[sector].size = ((cfi_info->erase_region_info[i] >> 16) * 256) * bank->bus_width / bank->chip_width;
2415 offset += bank->sectors[sector].size;
2416 bank->sectors[sector].is_erased = -1;
2417 bank->sectors[sector].is_protected = -1;
2421 if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width))
2423 LOG_WARNING("CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
2424 (cfi_info->dev_size * bank->bus_width / bank->chip_width), offset);
2428 cfi_info->probed = 1;
2433 static int cfi_auto_probe(struct flash_bank_s *bank)
2435 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2436 if (cfi_info->probed)
2438 return cfi_probe(bank);
2442 static int cfi_intel_protect_check(struct flash_bank_s *bank)
2445 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2446 cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
2447 target_t *target = bank->target;
2448 uint8_t command[CFI_MAX_BUS_WIDTH];
2451 /* check if block lock bits are supported on this device */
2452 if (!(pri_ext->blk_status_reg_mask & 0x1))
2453 return ERROR_FLASH_OPERATION_FAILED;
2455 cfi_command(bank, 0x90, command);
2456 if ((retval = target_write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command)) != ERROR_OK)
2461 for (i = 0; i < bank->num_sectors; i++)
2463 uint8_t block_status = cfi_get_u8(bank, i, 0x2);
2465 if (block_status & 1)
2466 bank->sectors[i].is_protected = 1;
2468 bank->sectors[i].is_protected = 0;
2471 cfi_command(bank, 0xff, command);
2472 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
2475 static int cfi_spansion_protect_check(struct flash_bank_s *bank)
2478 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2479 cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
2480 target_t *target = bank->target;
2484 cfi_command(bank, 0xaa, command);
2485 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
2490 cfi_command(bank, 0x55, command);
2491 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command)) != ERROR_OK)
2496 cfi_command(bank, 0x90, command);
2497 if ((retval = target_write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command)) != ERROR_OK)
2502 for (i = 0; i < bank->num_sectors; i++)
2504 uint8_t block_status = cfi_get_u8(bank, i, 0x2);
2506 if (block_status & 1)
2507 bank->sectors[i].is_protected = 1;
2509 bank->sectors[i].is_protected = 0;
2512 cfi_command(bank, 0xf0, command);
2513 return target_write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
2516 static int cfi_protect_check(struct flash_bank_s *bank)
2518 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2520 if (bank->target->state != TARGET_HALTED)
2522 LOG_ERROR("Target not halted");
2523 return ERROR_TARGET_NOT_HALTED;
2526 if (cfi_info->qry[0] != 'Q')
2527 return ERROR_FLASH_BANK_NOT_PROBED;
2529 switch (cfi_info->pri_id)
2533 return cfi_intel_protect_check(bank);
2536 return cfi_spansion_protect_check(bank);
2539 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
2546 static int cfi_info(struct flash_bank_s *bank, char *buf, int buf_size)
2549 cfi_flash_bank_t *cfi_info = bank->driver_priv;
2551 if (cfi_info->qry[0] == (char)-1)
2553 printed = snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n");
2557 if (cfi_info->not_cfi == 0)
2558 printed = snprintf(buf, buf_size, "\ncfi information:\n");
2560 printed = snprintf(buf, buf_size, "\nnon-cfi flash:\n");
2562 buf_size -= printed;
2564 printed = snprintf(buf, buf_size, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
2565 cfi_info->manufacturer, cfi_info->device_id);
2567 buf_size -= printed;
2569 if (cfi_info->not_cfi == 0)
2571 printed = snprintf(buf, buf_size, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
2573 buf_size -= printed;
2575 printed = snprintf(buf, buf_size, "Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x\n",
2576 (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
2577 (cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
2578 (cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
2579 (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
2581 buf_size -= printed;
2583 printed = snprintf(buf, buf_size, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n",
2584 1 << cfi_info->word_write_timeout_typ,
2585 1 << cfi_info->buf_write_timeout_typ,
2586 1 << cfi_info->block_erase_timeout_typ,
2587 1 << cfi_info->chip_erase_timeout_typ);
2589 buf_size -= printed;
2591 printed = snprintf(buf, buf_size, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n",
2592 (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
2593 (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
2594 (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
2595 (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
2597 buf_size -= printed;
2599 printed = snprintf(buf, buf_size, "size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x\n",
2601 cfi_info->interface_desc,
2602 1 << cfi_info->max_buf_write_size);
2604 buf_size -= printed;
2606 switch (cfi_info->pri_id)
2610 cfi_intel_info(bank, buf, buf_size);
2613 cfi_spansion_info(bank, buf, buf_size);
2616 LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);