2 * vim:ts=4:sw=4:expandtab
4 * i3 - an improved dynamic tiling window manager
5 * © 2009-2010 Michael Stapelberg and contributors (see also: LICENSE)
10 #include <xcb/xcb_atom.h>
11 #include <xcb/randr.h>
13 #include <X11/XKBlib.h>
17 /* After mapping/unmapping windows, a notify event is generated. However, we don’t want it,
18 since it’d trigger an infinite loop of switching between the different windows when
19 changing workspaces */
20 static SLIST_HEAD(ignore_head, Ignore_Event) ignore_events;
22 void add_ignore_event(const int sequence) {
23 struct Ignore_Event *event = smalloc(sizeof(struct Ignore_Event));
25 event->sequence = sequence;
26 event->added = time(NULL);
28 SLIST_INSERT_HEAD(&ignore_events, event, ignore_events);
32 * Checks if the given sequence is ignored and returns true if so.
35 static bool event_is_ignored(const int sequence) {
36 struct Ignore_Event *event;
37 time_t now = time(NULL);
38 for (event = SLIST_FIRST(&ignore_events); event != SLIST_END(&ignore_events);) {
39 if ((now - event->added) > 5) {
40 struct Ignore_Event *save = event;
41 event = SLIST_NEXT(event, ignore_events);
42 SLIST_REMOVE(&ignore_events, save, Ignore_Event, ignore_events);
44 } else event = SLIST_NEXT(event, ignore_events);
47 SLIST_FOREACH(event, &ignore_events, ignore_events) {
48 if (event->sequence != sequence)
51 /* instead of removing a sequence number we better wait until it gets
52 * garbage collected. it may generate multiple events (there are multiple
53 * enter_notifies for one configure_request, for example). */
54 //SLIST_REMOVE(&ignore_events, event, Ignore_Event, ignore_events);
63 * There was a key press. We compare this key code with our bindings table and pass
64 * the bound action to parse_command().
67 int handle_key_press(void *ignored, xcb_connection_t *conn, xcb_key_press_event_t *event) {
68 DLOG("Keypress %d, state raw = %d\n", event->detail, event->state);
70 /* Remove the numlock bit, all other bits are modifiers we can bind to */
71 uint16_t state_filtered = event->state & ~(xcb_numlock_mask | XCB_MOD_MASK_LOCK);
72 DLOG("(removed numlock, state = %d)\n", state_filtered);
73 /* Only use the lower 8 bits of the state (modifier masks) so that mouse
74 * button masks are filtered out */
75 state_filtered &= 0xFF;
76 DLOG("(removed upper 8 bits, state = %d)\n", state_filtered);
78 if (xkb_current_group == XkbGroup2Index)
79 state_filtered |= BIND_MODE_SWITCH;
81 DLOG("(checked mode_switch, state %d)\n", state_filtered);
83 /* Find the binding */
84 Binding *bind = get_binding(state_filtered, event->detail);
86 /* No match? Then the user has Mode_switch enabled but does not have a
87 * specific keybinding. Fall back to the default keybindings (without
88 * Mode_switch). Makes it much more convenient for users of a hybrid
89 * layout (like us, ru). */
91 state_filtered &= ~(BIND_MODE_SWITCH);
92 DLOG("no match, new state_filtered = %d\n", state_filtered);
93 if ((bind = get_binding(state_filtered, event->detail)) == NULL) {
94 ELOG("Could not lookup key binding (modifiers %d, keycode %d)\n",
95 state_filtered, event->detail);
100 parse_cmd(bind->command);
108 * Called with coordinates of an enter_notify event or motion_notify event
109 * to check if the user crossed virtual screen boundaries and adjust the
110 * current workspace, if so.
113 static void check_crossing_screen_boundary(uint32_t x, uint32_t y) {
116 if ((output = get_output_containing(x, y)) == NULL) {
117 ELOG("ERROR: No such screen\n");
120 if (output == c_ws->output)
123 c_ws->current_row = current_row;
124 c_ws->current_col = current_col;
125 c_ws = output->current_workspace;
126 current_row = c_ws->current_row;
127 current_col = c_ws->current_col;
128 DLOG("We're now on output %p\n", output);
130 /* While usually this function is only called when the user switches
131 * to a different output using his mouse (and thus the output is
132 * empty), it may be that the following race condition occurs:
133 * 1) the user actives a new output (say VGA1).
134 * 2) the cursor is sent to the first pixel of the new VGA1, thus
135 * generating an enter_notify for the screen (the enter_notify
136 * is not yet received by i3).
137 * 3) i3 requeries screen configuration and maps a workspace onto the
139 * 4) the enter_notify event arrives and c_ws is set to the new
140 * workspace but the existing windows on the new workspace are not
143 * Therefore, we re-set the focus here to be sure it’s correct. */
144 Client *first_client = SLIST_FIRST(&(c_ws->focus_stack));
145 if (first_client != NULL)
146 set_focus(global_conn, first_client, true);
151 * When the user moves the mouse pointer onto a window, this callback gets called.
154 int handle_enter_notify(void *ignored, xcb_connection_t *conn,
155 xcb_enter_notify_event_t *event) {
158 DLOG("enter_notify for %08x, mode = %d, detail %d, serial %d\n",
159 event->event, event->mode, event->detail, event->sequence);
160 DLOG("coordinates %d, %d\n", event->event_x, event->event_y);
161 if (event->mode != XCB_NOTIFY_MODE_NORMAL) {
162 DLOG("This was not a normal notify, ignoring\n");
165 /* Some events are not interesting, because they were not generated
166 * actively by the user, but by reconfiguration of windows */
167 if (event_is_ignored(event->sequence))
170 bool enter_child = false;
171 /* Get container by frame or by child window */
172 if ((con = con_by_frame_id(event->event)) == NULL) {
173 con = con_by_window_id(event->event);
177 /* If not, then the user moved his cursor to the root window. In that case, we adjust c_ws */
179 DLOG("Getting screen at %d x %d\n", event->root_x, event->root_y);
180 //check_crossing_screen_boundary(event->root_x, event->root_y);
184 /* see if the user entered the window on a certain window decoration */
185 int layout = (enter_child ? con->parent->layout : con->layout);
187 TAILQ_FOREACH(child, &(con->nodes_head), nodes)
188 if (rect_contains(child->deco_rect, event->event_x, event->event_y)) {
189 LOG("using child %p / %s instead!\n", child, child->name);
194 /* for stacked/tabbed layout we do not want to change focus when the user
195 * enters the window at the decoration of any child window. */
196 if (layout == L_STACKED || layout == L_TABBED) {
197 con = TAILQ_FIRST(&(con->parent->focus_head));
198 LOG("using focused %p / %s instead\n", con, con->name);
202 if (client->workspace != c_ws && client->workspace->output == c_ws->output) {
203 /* This can happen when a client gets assigned to a different workspace than
204 * the current one (see src/mainx.c:reparent_window). Shortly after it was created,
205 * an enter_notify will follow. */
206 DLOG("enter_notify for a client on a different workspace but the same screen, ignoring\n");
211 if (config.disable_focus_follows_mouse)
214 while (!TAILQ_EMPTY(&(next->focus_head)))
215 next = TAILQ_FIRST(&(next->focus_head));
218 x_push_changes(croot);
224 * When the user moves the mouse but does not change the active window
225 * (e.g. when having no windows opened but moving mouse on the root screen
226 * and crossing virtual screen boundaries), this callback gets called.
229 int handle_motion_notify(void *ignored, xcb_connection_t *conn, xcb_motion_notify_event_t *event) {
230 /* Skip events where the pointer was over a child window, we are only
231 * interested in events on the root window. */
232 if (event->child != 0)
236 if ((con = con_by_frame_id(event->event)) == NULL) {
237 /* TODO; handle root window: */
238 //check_crossing_screen_boundary(event->root_x, event->root_y);
242 if (config.disable_focus_follows_mouse)
245 if (con->layout != L_DEFAULT)
248 /* see over which rect the user is */
250 TAILQ_FOREACH(current, &(con->nodes_head), nodes) {
251 if (!rect_contains(current->deco_rect, event->event_x, event->event_y))
254 /* We found the rect, let’s see if this window is focused */
255 if (TAILQ_FIRST(&(con->focus_head)) == current)
259 x_push_changes(croot);
268 * Called when the keyboard mapping changes (for example by using Xmodmap),
269 * we need to update our key bindings then (re-translate symbols).
272 int handle_mapping_notify(void *ignored, xcb_connection_t *conn, xcb_mapping_notify_event_t *event) {
273 if (event->request != XCB_MAPPING_KEYBOARD &&
274 event->request != XCB_MAPPING_MODIFIER)
277 DLOG("Received mapping_notify for keyboard or modifier mapping, re-grabbing keys\n");
278 xcb_refresh_keyboard_mapping(keysyms, event);
280 xcb_get_numlock_mask(conn);
282 ungrab_all_keys(conn);
284 grab_all_keys(conn, false);
291 * A new window appeared on the screen (=was mapped), so let’s manage it.
294 int handle_map_request(void *prophs, xcb_connection_t *conn, xcb_map_request_event_t *event) {
295 xcb_get_window_attributes_cookie_t cookie;
297 cookie = xcb_get_window_attributes_unchecked(conn, event->window);
299 DLOG("window = 0x%08x, serial is %d.\n", event->window, event->sequence);
300 add_ignore_event(event->sequence);
302 manage_window(event->window, cookie, false);
303 x_push_changes(croot);
308 * Configure requests are received when the application wants to resize windows on their own.
310 * We generate a synthethic configure notify event to signalize the client its "new" position.
313 int handle_configure_request(void *prophs, xcb_connection_t *conn, xcb_configure_request_event_t *event) {
316 DLOG("window 0x%08x wants to be at %dx%d with %dx%d\n",
317 event->window, event->x, event->y, event->width, event->height);
319 /* For unmanaged windows, we just execute the configure request. As soon as
320 * it gets mapped, we will take over anyways. */
321 if ((con = con_by_window_id(event->window)) == NULL) {
322 DLOG("Configure request for unmanaged window, can do that.\n");
327 #define COPY_MASK_MEMBER(mask_member, event_member) do { \
328 if (event->value_mask & mask_member) { \
329 mask |= mask_member; \
330 values[c++] = event->event_member; \
334 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_X, x);
335 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_Y, y);
336 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_WIDTH, width);
337 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_HEIGHT, height);
338 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_BORDER_WIDTH, border_width);
339 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_SIBLING, sibling);
340 COPY_MASK_MEMBER(XCB_CONFIG_WINDOW_STACK_MODE, stack_mode);
342 xcb_configure_window(conn, event->window, mask, values);
348 DLOG("Configure request!\n");
349 if (con_is_floating(con) && con_is_leaf(con)) {
350 /* find the height for the decorations */
351 i3Font *font = load_font(conn, config.font);
352 int deco_height = font->height + 5;
353 /* we actually need to apply the size/position changes to the *parent*
355 Rect bsr = con_border_style_rect(con);
356 if (con->border_style == BS_NORMAL) {
357 bsr.y += deco_height;
358 bsr.height -= deco_height;
361 DLOG("Container is a floating leaf node, will do that.\n");
362 if (event->value_mask & XCB_CONFIG_WINDOW_X) {
363 con->rect.x = event->x + (-1) * bsr.x;
364 DLOG("proposed x = %d, new x is %d\n", event->x, con->rect.x);
366 if (event->value_mask & XCB_CONFIG_WINDOW_Y) {
367 con->rect.y = event->y + (-1) * bsr.y;
368 DLOG("proposed y = %d, new y is %d\n", event->y, con->rect.y);
370 if (event->value_mask & XCB_CONFIG_WINDOW_WIDTH) {
371 con->rect.width = event->width + (-1) * bsr.width;
372 DLOG("proposed width = %d, new width is %d\n", event->width, con->rect.width);
374 if (event->value_mask & XCB_CONFIG_WINDOW_HEIGHT) {
375 con->rect.height = event->height + (-1) * bsr.height;
376 DLOG("proposed height = %d, new height is %d\n", event->height, con->rect.height);
381 fake_absolute_configure_notify(con);
385 /* Dock clients can be reconfigured in their height */
387 DLOG("Reconfiguring height of this dock client\n");
389 if (!(event->value_mask & XCB_CONFIG_WINDOW_HEIGHT)) {
390 DLOG("Ignoring configure request, no height given\n");
394 client->desired_height = event->height;
395 render_workspace(conn, c_ws->output, c_ws);
401 if (client->fullscreen) {
402 DLOG("Client is in fullscreen mode\n");
404 Rect child_rect = client->container->workspace->rect;
405 child_rect.x = child_rect.y = 0;
406 fake_configure_notify(conn, child_rect, client->child);
411 fake_absolute_configure_notify(conn, client);
419 * Configuration notifies are only handled because we need to set up ignore for
420 * the following enter notify events.
423 int handle_configure_event(void *prophs, xcb_connection_t *conn, xcb_configure_notify_event_t *event) {
424 DLOG("configure_event, sequence %d\n", event->sequence);
425 /* We ignore this sequence twice because events for child and frame should be ignored */
426 add_ignore_event(event->sequence);
427 add_ignore_event(event->sequence);
434 * Gets triggered upon a RandR screen change event, that is when the user
435 * changes the screen configuration in any way (mode, position, …)
438 int handle_screen_change(void *prophs, xcb_connection_t *conn,
439 xcb_generic_event_t *e) {
440 DLOG("RandR screen change\n");
442 randr_query_outputs();
444 ipc_send_event("output", I3_IPC_EVENT_OUTPUT, "{\"change\":\"unspecified\"}");
450 * Our window decorations were unmapped. That means, the window will be killed
451 * now, so we better clean up before.
454 int handle_unmap_notify_event(void *data, xcb_connection_t *conn, xcb_unmap_notify_event_t *event) {
456 /* FIXME: we cannot ignore this sequence because more UnmapNotifys with the same sequence
457 * numbers but different window IDs may follow */
458 /* we need to ignore EnterNotify events which will be generated because a
459 * different window is visible now */
460 //add_ignore_event(event->sequence);
462 DLOG("UnmapNotify for 0x%08x (received from 0x%08x), serial %d\n", event->window, event->event, event->sequence);
463 Con *con = con_by_window_id(event->window);
465 /* This could also be an UnmapNotify for the frame. We need to
466 * decrement the ignore_unmap counter. */
467 con = con_by_frame_id(event->window);
469 LOG("Not a managed window, ignoring UnmapNotify event\n");
472 if (con->ignore_unmap > 0)
474 DLOG("ignore_unmap = %d for frame of container %p\n", con->ignore_unmap, con);
478 if (con->ignore_unmap > 0) {
479 DLOG("ignore_unmap = %d, dec\n", con->ignore_unmap);
484 tree_close(con, false, false);
486 x_push_changes(croot);
490 if (client == NULL) {
491 DLOG("not a managed window. Ignoring.\n");
493 /* This was most likely the destroyed frame of a client which is
494 * currently being unmapped, so we add this sequence (again!) to
495 * the ignore list (enter_notify events will get sent for both,
496 * the child and its frame). */
497 add_ignore_event(event->sequence);
505 /* Let’s see how many clients there are left on the workspace to delete it if it’s empty */
506 bool workspace_empty = SLIST_EMPTY(&(client->workspace->focus_stack));
507 bool workspace_focused = (c_ws == client->workspace);
508 Client *to_focus = (!workspace_empty ? SLIST_FIRST(&(client->workspace->focus_stack)) : NULL);
510 /* If this workspace is currently visible, we don’t delete it */
511 if (workspace_is_visible(client->workspace))
512 workspace_empty = false;
514 if (workspace_empty) {
515 client->workspace->output = NULL;
516 ipc_send_event("workspace", I3_IPC_EVENT_WORKSPACE, "{\"change\":\"empty\"}");
519 /* Remove the urgency flag if set */
520 client->urgent = false;
521 workspace_update_urgent_flag(client->workspace);
530 * A destroy notify event is sent when the window is not unmapped, but
531 * immediately destroyed (for example when starting a window and immediately
532 * killing the program which started it).
534 * We just pass on the event to the unmap notify handler (by copying the
535 * important fields in the event data structure).
538 int handle_destroy_notify_event(void *data, xcb_connection_t *conn, xcb_destroy_notify_event_t *event) {
539 DLOG("destroy notify for 0x%08x, 0x%08x\n", event->event, event->window);
541 xcb_unmap_notify_event_t unmap;
542 unmap.sequence = event->sequence;
543 unmap.event = event->event;
544 unmap.window = event->window;
546 return handle_unmap_notify_event(NULL, conn, &unmap);
550 * Called when a window changes its title
553 int handle_windowname_change(void *data, xcb_connection_t *conn, uint8_t state,
554 xcb_window_t window, xcb_atom_t atom, xcb_get_property_reply_t *prop) {
556 if ((con = con_by_window_id(window)) == NULL || con->window == NULL)
559 window_update_name(con->window, prop);
561 x_push_changes(croot);
567 * Handles legacy window name updates (WM_NAME), see also src/window.c,
568 * window_update_name_legacy().
571 int handle_windowname_change_legacy(void *data, xcb_connection_t *conn, uint8_t state,
572 xcb_window_t window, xcb_atom_t atom, xcb_get_property_reply_t *prop) {
574 if ((con = con_by_window_id(window)) == NULL || con->window == NULL)
577 window_update_name_legacy(con->window, prop);
579 x_push_changes(croot);
585 * Updates the client’s WM_CLASS property
588 int handle_windowclass_change(void *data, xcb_connection_t *conn, uint8_t state,
589 xcb_window_t window, xcb_atom_t atom, xcb_get_property_reply_t *prop) {
591 if ((con = con_by_window_id(window)) == NULL || con->window == NULL)
594 window_update_class(con->window, prop);
600 * Expose event means we should redraw our windows (= title bar)
603 int handle_expose_event(void *data, xcb_connection_t *conn, xcb_expose_event_t *event) {
606 /* event->count is the number of minimum remaining expose events for this
607 * window, so we skip all events but the last one */
608 if (event->count != 0)
611 DLOG("window = %08x\n", event->window);
613 if ((parent = con_by_frame_id(event->window)) == NULL) {
614 LOG("expose event for unknown window, ignoring\n");
619 x_draw_decoration(parent);
621 TAILQ_FOREACH(con, &(parent->nodes_head), nodes) {
622 LOG("expose for con %p / %s\n", con, con->name);
624 x_draw_decoration(con);
627 /* We also need to render the decorations of other Cons nearby the Con
628 * itself to not get overlapping decorations */
629 TAILQ_FOREACH(con, &(parent->parent->nodes_head), nodes) {
630 LOG("expose for con %p / %s\n", con, con->name);
632 x_draw_decoration(con);
640 * Handle client messages (EWMH)
643 int handle_client_message(void *data, xcb_connection_t *conn, xcb_client_message_event_t *event) {
644 LOG("ClientMessage for window 0x%08x\n", event->window);
645 if (event->type == atoms[_NET_WM_STATE]) {
646 if (event->format != 32 || event->data.data32[1] != atoms[_NET_WM_STATE_FULLSCREEN]) {
647 DLOG("atom in clientmessage is %d, fullscreen is %d\n",
648 event->data.data32[1], atoms[_NET_WM_STATE_FULLSCREEN]);
649 DLOG("not about fullscreen atom\n");
653 Con *con = con_by_window_id(event->window);
655 DLOG("Could not get window for client message\n");
659 /* Check if the fullscreen state should be toggled */
660 if ((con->fullscreen_mode != CF_NONE &&
661 (event->data.data32[0] == _NET_WM_STATE_REMOVE ||
662 event->data.data32[0] == _NET_WM_STATE_TOGGLE)) ||
663 (con->fullscreen_mode == CF_NONE &&
664 (event->data.data32[0] == _NET_WM_STATE_ADD ||
665 event->data.data32[0] == _NET_WM_STATE_TOGGLE))) {
666 DLOG("toggling fullscreen\n");
667 con_toggle_fullscreen(con);
671 x_push_changes(croot);
673 ELOG("unhandled clientmessage\n");
681 int handle_window_type(void *data, xcb_connection_t *conn, uint8_t state, xcb_window_t window,
682 xcb_atom_t atom, xcb_get_property_reply_t *property) {
683 /* TODO: Implement this one. To do this, implement a little test program which sleep(1)s
684 before changing this property. */
685 ELOG("_NET_WM_WINDOW_TYPE changed, this is not yet implemented.\n");
691 * Handles the size hints set by a window, but currently only the part necessary for displaying
692 * clients proportionally inside their frames (mplayer for example)
694 * See ICCCM 4.1.2.3 for more details
697 int handle_normal_hints(void *data, xcb_connection_t *conn, uint8_t state, xcb_window_t window,
698 xcb_atom_t name, xcb_get_property_reply_t *reply) {
699 Con *con = con_by_window_id(window);
701 DLOG("Received WM_NORMAL_HINTS for unknown client\n");
705 xcb_size_hints_t size_hints;
707 //CLIENT_LOG(client);
709 /* If the hints were already in this event, use them, if not, request them */
711 xcb_get_wm_size_hints_from_reply(&size_hints, reply);
713 xcb_get_wm_normal_hints_reply(conn, xcb_get_wm_normal_hints_unchecked(conn, con->window->id), &size_hints, NULL);
715 if ((size_hints.flags & XCB_SIZE_HINT_P_MIN_SIZE)) {
716 // TODO: Minimum size is not yet implemented
717 DLOG("Minimum size: %d (width) x %d (height)\n", size_hints.min_width, size_hints.min_height);
720 bool changed = false;
721 if ((size_hints.flags & XCB_SIZE_HINT_P_RESIZE_INC)) {
722 if (size_hints.width_inc > 0 && size_hints.width_inc < 0xFFFF)
723 if (con->width_increment != size_hints.width_inc) {
724 con->width_increment = size_hints.width_inc;
727 if (size_hints.height_inc > 0 && size_hints.height_inc < 0xFFFF)
728 if (con->height_increment != size_hints.height_inc) {
729 con->height_increment = size_hints.height_inc;
734 DLOG("resize increments changed\n");
737 int base_width = 0, base_height = 0;
739 /* base_width/height are the desired size of the window.
740 We check if either the program-specified size or the program-specified
741 min-size is available */
742 if (size_hints.flags & XCB_SIZE_HINT_BASE_SIZE) {
743 base_width = size_hints.base_width;
744 base_height = size_hints.base_height;
745 } else if (size_hints.flags & XCB_SIZE_HINT_P_MIN_SIZE) {
746 /* TODO: is this right? icccm says not */
747 base_width = size_hints.min_width;
748 base_height = size_hints.min_height;
751 if (base_width != con->base_width ||
752 base_height != con->base_height) {
753 con->base_width = base_width;
754 con->base_height = base_height;
755 DLOG("client's base_height changed to %d\n", base_height);
756 DLOG("client's base_width changed to %d\n", base_width);
760 /* If no aspect ratio was set or if it was invalid, we ignore the hints */
761 if (!(size_hints.flags & XCB_SIZE_HINT_P_ASPECT) ||
762 (size_hints.min_aspect_num <= 0) ||
763 (size_hints.min_aspect_den <= 0)) {
764 goto render_and_return;
767 /* XXX: do we really use rect here, not window_rect? */
768 double width = con->rect.width - base_width;
769 double height = con->rect.height - base_height;
770 /* Convert numerator/denominator to a double */
771 double min_aspect = (double)size_hints.min_aspect_num / size_hints.min_aspect_den;
772 double max_aspect = (double)size_hints.max_aspect_num / size_hints.min_aspect_den;
774 DLOG("Aspect ratio set: minimum %f, maximum %f\n", min_aspect, max_aspect);
775 DLOG("width = %f, height = %f\n", width, height);
777 /* Sanity checks, this is user-input, in a way */
778 if (max_aspect <= 0 || min_aspect <= 0 || height == 0 || (width / height) <= 0)
779 goto render_and_return;
781 /* Check if we need to set proportional_* variables using the correct ratio */
782 if ((width / height) < min_aspect) {
783 con->proportional_width = width;
784 con->proportional_height = width / min_aspect;
785 } else if ((width / height) > max_aspect) {
786 con->proportional_width = width;
787 con->proportional_height = width / max_aspect;
788 } else goto render_and_return;
796 * Handles the WM_HINTS property for extracting the urgency state of the window.
799 int handle_hints(void *data, xcb_connection_t *conn, uint8_t state, xcb_window_t window,
800 xcb_atom_t name, xcb_get_property_reply_t *reply) {
801 Con *con = con_by_window_id(window);
803 DLOG("Received WM_HINTS for unknown client\n");
807 xcb_wm_hints_t hints;
810 if (!xcb_get_wm_hints_from_reply(&hints, reply))
813 if (!xcb_get_wm_hints_reply(conn, xcb_get_wm_hints_unchecked(conn, con->window->id), &hints, NULL))
817 if (!con->urgent && focused == con) {
818 DLOG("Ignoring urgency flag for current client\n");
822 /* Update the flag on the client directly */
823 con->urgent = (xcb_wm_hints_get_urgency(&hints) != 0);
825 LOG("Urgency flag changed to %d\n", con->urgent);
827 workspace_update_urgent_flag(con_get_workspace(con));
830 /* If the workspace this client is on is not visible, we need to redraw
831 * the workspace bar */
832 if (!workspace_is_visible(client->workspace)) {
833 Output *output = client->workspace->output;
834 render_workspace(conn, output, output->current_workspace);
843 * Handles the transient for hints set by a window, signalizing that this window is a popup window
844 * for some other window.
846 * See ICCCM 4.1.2.6 for more details
849 int handle_transient_for(void *data, xcb_connection_t *conn, uint8_t state, xcb_window_t window,
850 xcb_atom_t name, xcb_get_property_reply_t *prop) {
853 if ((con = con_by_window_id(window)) == NULL || con->window == NULL) {
854 DLOG("No such window\n");
859 prop = xcb_get_property_reply(conn, xcb_get_property_unchecked(conn,
860 false, window, WM_TRANSIENT_FOR, WINDOW, 0, 32), NULL);
865 window_update_transient_for(con->window, prop);
867 // TODO: put window in floating mode if con->window->transient_for != XCB_NONE:
869 if (client->floating == FLOATING_AUTO_OFF) {
870 DLOG("This is a popup window, putting into floating\n");
871 toggle_floating_mode(conn, client, true);
879 * Handles changes of the WM_CLIENT_LEADER atom which specifies if this is a
880 * toolwindow (or similar) and to which window it belongs (logical parent).
883 int handle_clientleader_change(void *data, xcb_connection_t *conn, uint8_t state, xcb_window_t window,
884 xcb_atom_t name, xcb_get_property_reply_t *prop) {
886 if ((con = con_by_window_id(window)) == NULL || con->window == NULL)
890 prop = xcb_get_property_reply(conn, xcb_get_property_unchecked(conn,
891 false, window, WM_CLIENT_LEADER, WINDOW, 0, 32), NULL);
896 window_update_leader(con->window, prop);