3 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
5 ## Copyright 1998-2009 The OpenLDAP Foundation.
6 ## All rights reserved.
8 ## Redistribution and use in source and binary forms, with or without
9 ## modification, are permitted only as authorized by the OpenLDAP
12 ## A copy of this license is available in the file LICENSE in the
13 ## top-level directory of the distribution or, alternatively, at
14 ## <http://www.OpenLDAP.org/license.html>.
16 echo "running defines.sh"
17 . $SRCDIR/scripts/defines.sh
19 if test $SYNCPROV = syncprovno; then
20 echo "Syncrepl provider overlay not available, test skipped"
31 mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
33 $SLAPPASSWD -g -n >$CONFIGPWF
35 if test x"$SYNCMODE" = x ; then
40 SYNCTYPE="type=refreshOnly interval=00:00:00:10"
43 SYNCTYPE="type=refreshAndPersist"
46 echo "unknown sync mode $SYNCMODE"
52 # Test replication of dynamic config:
55 # - configure over ldap
56 # - populate over ldap
57 # - configure syncrepl over ldap
58 # - retrieve database over ldap and compare against expected results
61 echo "Starting producer slapd on TCP/IP port $PORT1..."
62 . $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
63 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
65 $SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
67 if test $WAIT != 0 ; then
76 echo "Using ldapsearch to check that producer slapd is running..."
77 for i in 0 1 2 3 4 5; do
78 $LDAPSEARCH -s base -b "" -H $URI1 \
79 'objectclass=*' > /dev/null 2>&1
81 if test $RC = 0 ; then
84 echo "Waiting 5 seconds for slapd to start..."
88 if test $RC != 0 ; then
89 echo "ldapsearch failed ($RC)!"
90 test $KILLSERVERS != no && kill -HUP $KILLPIDS
94 echo "Inserting syncprov overlay on producer..."
95 if [ "$SYNCPROV" = syncprovmod ]; then
96 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
97 dn: cn=module,cn=config
98 objectClass: olcModuleList
100 olcModulePath: ../../../servers/slapd/overlays
101 olcModuleLoad: syncprov.la
104 if test $RC != 0 ; then
105 echo "ldapadd failed for moduleLoad ($RC)!"
106 test $KILLSERVERS != no && kill -HUP $KILLPIDS
110 read CONFIGPW < $CONFIGPWF
111 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
112 dn: olcDatabase={0}config,cn=config
115 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
116 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
117 retry="5 5 300 5" timeout=3
122 dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
124 objectClass: olcOverlayConfig
125 objectClass: olcSyncProvConfig
129 if test $RC != 0 ; then
130 echo "ldapmodify failed for syncrepl config ($RC)!"
131 test $KILLSERVERS != no && kill -HUP $KILLPIDS
135 echo "Starting consumer slapd on TCP/IP port $PORT2..."
136 $SLAPADD -F $CFCON -n 0 -l $CONFLDIF
138 $SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
140 if test $WAIT != 0 ; then
141 echo SLAVEPID $SLAVEPID
144 KILLPIDS="$KILLPIDS $SLAVEPID"
149 echo "Using ldapsearch to check that consumer slapd is running..."
150 for i in 0 1 2 3 4 5; do
151 $LDAPSEARCH -s base -b "" -H $URI2 \
152 'objectclass=*' > /dev/null 2>&1
154 if test $RC = 0 ; then
157 echo "Waiting 5 seconds for slapd to start..."
161 if test $RC != 0 ; then
162 echo "ldapsearch failed ($RC)!"
163 test $KILLSERVERS != no && kill -HUP $KILLPIDS
167 echo "Configuring syncrepl on consumer..."
168 $LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
169 dn: olcDatabase={0}config,cn=config
172 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
173 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
174 retry="5 5 300 5" timeout=3
181 echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
184 echo "Using ldapsearch to check that syncrepl received config changes..."
186 for i in 0 1 2 3 4 5; do
187 RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \
188 -s base -b "olcDatabase={0}config,cn=config" \
189 '(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
190 if test "x$RESULT" = "xOK" ; then
194 echo "Waiting 5 seconds for syncrepl to receive changes..."
198 if test $RC != 0 ; then
199 echo "ldapsearch failed ($RC)!"
200 test $KILLSERVERS != no && kill -HUP $KILLPIDS
204 echo "Adding schema and databases on producer..."
205 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
206 include: file://$ABS_SCHEMADIR/core.ldif
208 include: file://$ABS_SCHEMADIR/cosine.ldif
210 include: file://$ABS_SCHEMADIR/inetorgperson.ldif
212 include: file://$ABS_SCHEMADIR/openldap.ldif
214 include: file://$ABS_SCHEMADIR/nis.ldif
217 if test $RC != 0 ; then
218 echo "ldapadd failed for schema config ($RC)!"
219 test $KILLSERVERS != no && kill -HUP $KILLPIDS
223 if [ "$BACKENDTYPE" = mod ]; then
224 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
225 dn: cn=module,cn=config
226 objectClass: olcModuleList
228 olcModulePath: ../../../servers/slapd/back-$BACKEND
229 olcModuleLoad: back_$BACKEND.la
232 if test $RC != 0 ; then
233 echo "ldapadd failed for backend config ($RC)!"
234 test $KILLSERVERS != no && kill -HUP $KILLPIDS
239 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
240 dn: olcDatabase={1}$BACKEND,cn=config
241 objectClass: olcDatabaseConfig
242 objectClass: olc${BACKEND}Config
243 olcDatabase: {1}$BACKEND
246 olcRootDN: $MANAGERDN
248 olcSyncRepl: rid=002 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
249 credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
250 retry="5 5 300 5" timeout=3
253 dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
255 objectClass: olcOverlayConfig
256 objectClass: olcSyncProvConfig
260 if test $RC != 0 ; then
261 echo "ldapadd failed for database config ($RC)!"
262 test $KILLSERVERS != no && kill -HUP $KILLPIDS
268 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
269 dn: olcDatabase={1}$BACKEND,cn=config
272 olcDbIndex: objectClass,entryUUID,entryCSN eq
273 olcDbIndex: cn,uid pres,eq,sub
276 if test $RC != 0 ; then
277 echo "ldapadd modify for database config ($RC)!"
278 test $KILLSERVERS != no && kill -HUP $KILLPIDS
284 echo "Using ldapadd to populate producer..."
285 $LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
288 if test $RC != 0 ; then
289 echo "ldapadd failed for database config ($RC)!"
290 test $KILLSERVERS != no && kill -HUP $KILLPIDS
295 echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
298 echo "Using ldapsearch to check that syncrepl received database changes..."
300 for i in 0 1 2 3 4 5; do
301 RESULT=`$LDAPSEARCH -H $URI2 \
302 -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
303 '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
304 if test "x$RESULT" = "xOK" ; then
308 echo "Waiting 5 seconds for syncrepl to receive changes..."
312 if test $RC != 0 ; then
313 echo "ldapsearch failed ($RC)!"
314 test $KILLSERVERS != no && kill -HUP $KILLPIDS
318 echo "Replacing olcSyncrepl on producer..."
319 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
320 dn: olcDatabase={0}config,cn=config
323 olcSyncRepl: rid=002 provider=$URI1 binddn="cn=config" bindmethod=simple
324 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
325 retry="3 5 300 5" timeout=3
327 echo "Waiting 10 seconds for syncrepl to receive changes..."
330 echo "Using ldapsearch to read config from the producer..."
331 $LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
332 'objectclass=*' > $MASTEROUT 2>&1
335 if test $RC != 0 ; then
336 echo "ldapsearch failed at producer ($RC)!"
337 test $KILLSERVERS != no && kill -HUP $KILLPIDS
341 echo "Using ldapsearch to read config from the consumer..."
342 $LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
343 'objectclass=*' > $SLAVEOUT 2>&1
346 if test $RC != 0 ; then
347 echo "ldapsearch failed at consumer ($RC)!"
348 test $KILLSERVERS != no && kill -HUP $KILLPIDS
352 echo "Filtering producer results..."
353 . $LDIFFILTER < $MASTEROUT > $MASTERFLT
354 echo "Filtering consumer results..."
355 . $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
357 echo "Comparing retrieved configs from producer and consumer..."
358 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
360 if test $? != 0 ; then
361 echo "test failed - producer and consumer configs differ"
362 test $KILLSERVERS != no && kill -HUP $KILLPIDS
366 echo "Using ldapsearch to read all the entries from the producer..."
367 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
368 'objectclass=*' > $MASTEROUT 2>&1
371 if test $RC != 0 ; then
372 echo "ldapsearch failed at producer ($RC)!"
373 test $KILLSERVERS != no && kill -HUP $KILLPIDS
377 echo "Using ldapsearch to read all the entries from the consumer..."
378 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
379 'objectclass=*' > $SLAVEOUT 2>&1
382 if test $RC != 0 ; then
383 echo "ldapsearch failed at consumer ($RC)!"
384 test $KILLSERVERS != no && kill -HUP $KILLPIDS
388 test $KILLSERVERS != no && kill -HUP $KILLPIDS
390 echo "Filtering producer results..."
391 . $LDIFFILTER < $MASTEROUT > $MASTERFLT
392 echo "Filtering consumer results..."
393 . $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
395 echo "Comparing retrieved entries from producer and consumer..."
396 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
398 if test $? != 0 ; then
399 echo "test failed - producer and consumer databases differ"
403 echo ">>>>> Test succeeded"
405 test $KILLSERVERS != no && wait