3 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
5 ## Copyright 1998-2010 The OpenLDAP Foundation.
6 ## All rights reserved.
8 ## Redistribution and use in source and binary forms, with or without
9 ## modification, are permitted only as authorized by the OpenLDAP
12 ## A copy of this license is available in the file LICENSE in the
13 ## top-level directory of the distribution or, alternatively, at
14 ## <http://www.OpenLDAP.org/license.html>.
16 echo "running defines.sh"
17 . $SRCDIR/scripts/defines.sh
19 if test $SYNCPROV = syncprovno; then
20 echo "Syncrepl provider overlay not available, test skipped"
31 mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
33 $SLAPPASSWD -g -n >$CONFIGPWF
35 if test x"$SYNCMODE" = x ; then
40 SYNCTYPE="type=refreshOnly interval=00:00:00:03"
43 SYNCTYPE="type=refreshAndPersist"
46 echo "unknown sync mode $SYNCMODE"
52 # Test replication of dynamic config:
55 # - configure over ldap
56 # - populate over ldap
57 # - configure syncrepl over ldap
58 # - retrieve database over ldap and compare against expected results
61 echo "Starting producer slapd on TCP/IP port $PORT1..."
62 . $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
63 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
65 $SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
67 if test $WAIT != 0 ; then
76 echo "Using ldapsearch to check that producer slapd is running..."
77 for i in 0 1 2 3 4 5; do
78 $LDAPSEARCH -s base -b "" -H $URI1 \
79 'objectclass=*' > /dev/null 2>&1
81 if test $RC = 0 ; then
84 echo "Waiting 5 seconds for slapd to start..."
88 if test $RC != 0 ; then
89 echo "ldapsearch failed ($RC)!"
90 test $KILLSERVERS != no && kill -HUP $KILLPIDS
94 echo "Inserting syncprov overlay on producer..."
95 if [ "$SYNCPROV" = syncprovmod ]; then
96 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
97 dn: cn=module,cn=config
98 objectClass: olcModuleList
100 olcModulePath: ../../../servers/slapd/overlays
101 olcModuleLoad: syncprov.la
104 if test $RC != 0 ; then
105 echo "ldapadd failed for moduleLoad ($RC)!"
106 test $KILLSERVERS != no && kill -HUP $KILLPIDS
110 read CONFIGPW < $CONFIGPWF
111 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
112 dn: olcDatabase={0}config,cn=config
115 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
116 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
117 retry="3 5 300 5" timeout=3
122 dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
124 objectClass: olcOverlayConfig
125 objectClass: olcSyncProvConfig
129 if test $RC != 0 ; then
130 echo "ldapmodify failed for syncrepl config ($RC)!"
131 test $KILLSERVERS != no && kill -HUP $KILLPIDS
135 echo "Starting consumer slapd on TCP/IP port $PORT2..."
136 $SLAPADD -F $CFCON -n 0 -l $CONFLDIF
138 $SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
140 if test $WAIT != 0 ; then
141 echo SLAVEPID $SLAVEPID
144 KILLPIDS="$KILLPIDS $SLAVEPID"
149 echo "Using ldapsearch to check that consumer slapd is running..."
150 for i in 0 1 2 3 4 5; do
151 $LDAPSEARCH -s base -b "" -H $URI2 \
152 'objectclass=*' > /dev/null 2>&1
154 if test $RC = 0 ; then
157 echo "Waiting 5 seconds for slapd to start..."
161 if test $RC != 0 ; then
162 echo "ldapsearch failed ($RC)!"
163 test $KILLSERVERS != no && kill -HUP $KILLPIDS
167 echo "Configuring syncrepl on consumer..."
168 $LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
169 dn: olcDatabase={0}config,cn=config
172 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
173 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
174 retry="3 5 300 5" timeout=3
180 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
183 echo "Using ldapsearch to check that syncrepl received config changes..."
185 for i in 0 1 2 3 4 5; do
186 RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \
187 -s base -b "olcDatabase={0}config,cn=config" \
188 '(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
189 if test "x$RESULT" = "xOK" ; then
193 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
197 if test $RC != 0 ; then
198 echo "ldapsearch failed ($RC)!"
199 test $KILLSERVERS != no && kill -HUP $KILLPIDS
203 echo "Adding schema and databases on producer..."
204 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
205 include: file://$ABS_SCHEMADIR/core.ldif
207 include: file://$ABS_SCHEMADIR/cosine.ldif
209 include: file://$ABS_SCHEMADIR/inetorgperson.ldif
211 include: file://$ABS_SCHEMADIR/openldap.ldif
213 include: file://$ABS_SCHEMADIR/nis.ldif
216 if test $RC != 0 ; then
217 echo "ldapadd failed for schema config ($RC)!"
218 test $KILLSERVERS != no && kill -HUP $KILLPIDS
222 nullExclude="" nullOK=""
223 test $BACKEND = null && nullExclude="# " nullOK="OK"
225 if [ "$BACKENDTYPE" = mod ]; then
226 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
227 dn: cn=module,cn=config
228 objectClass: olcModuleList
230 olcModulePath: ../../../servers/slapd/back-$BACKEND
231 olcModuleLoad: back_$BACKEND.la
234 if test $RC != 0 ; then
235 echo "ldapadd failed for backend config ($RC)!"
236 test $KILLSERVERS != no && kill -HUP $KILLPIDS
241 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
242 dn: olcDatabase={1}$BACKEND,cn=config
243 objectClass: olcDatabaseConfig
244 ${nullExclude}objectClass: olc${BACKEND}Config
245 olcDatabase: {1}$BACKEND
247 ${nullExclude}olcDbDirectory: ./db
248 olcRootDN: $MANAGERDN
250 olcSyncRepl: rid=002 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
251 credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
252 retry="3 5 300 5" timeout=3
255 dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
257 objectClass: olcOverlayConfig
258 objectClass: olcSyncProvConfig
262 if test $RC != 0 ; then
263 echo "ldapadd failed for database config ($RC)!"
264 test $KILLSERVERS != no && kill -HUP $KILLPIDS
270 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
271 dn: olcDatabase={1}$BACKEND,cn=config
274 olcDbIndex: objectClass,entryUUID,entryCSN eq
275 olcDbIndex: cn,uid pres,eq,sub
278 if test $RC != 0 ; then
279 echo "ldapadd modify for database config ($RC)!"
280 test $KILLSERVERS != no && kill -HUP $KILLPIDS
286 echo "Using ldapadd to populate producer..."
287 $LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
290 if test $RC != 0 ; then
291 echo "ldapadd failed for database config ($RC)!"
292 test $KILLSERVERS != no && kill -HUP $KILLPIDS
296 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
299 echo "Using ldapsearch to check that syncrepl received database changes..."
301 for i in 0 1 2 3 4 5; do
302 RESULT=`$LDAPSEARCH -H $URI2 \
303 -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
304 '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
305 if test "x$RESULT$nullOK" = "xOK" ; then
309 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
313 if test $RC != 0 ; then
314 echo "ldapsearch failed ($RC)!"
315 test $KILLSERVERS != no && kill -HUP $KILLPIDS
319 echo "Replacing olcSyncrepl on producer..."
320 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
321 dn: olcDatabase={0}config,cn=config
324 olcSyncRepl: rid=002 provider=$URI1 binddn="cn=config" bindmethod=simple
325 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
326 retry="3 5 300 5" timeout=3
328 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
331 echo "Using ldapsearch to read config from the producer..."
332 $LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
333 'objectclass=*' > $MASTEROUT 2>&1
336 if test $RC != 0 ; then
337 echo "ldapsearch failed at producer ($RC)!"
338 test $KILLSERVERS != no && kill -HUP $KILLPIDS
342 echo "Using ldapsearch to read config from the consumer..."
343 $LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
344 'objectclass=*' > $SLAVEOUT 2>&1
347 if test $RC != 0 ; then
348 echo "ldapsearch failed at consumer ($RC)!"
349 test $KILLSERVERS != no && kill -HUP $KILLPIDS
353 echo "Filtering producer results..."
354 $LDIFFILTER < $MASTEROUT > $MASTERFLT
355 echo "Filtering consumer results..."
356 $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
358 echo "Comparing retrieved configs from producer and consumer..."
359 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
361 if test $? != 0 ; then
362 echo "test failed - producer and consumer configs differ"
363 test $KILLSERVERS != no && kill -HUP $KILLPIDS
367 echo "Using ldapsearch to read all the entries from the producer..."
368 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
369 'objectclass=*' > $MASTEROUT 2>&1
372 if test $RC != 0 ; then
373 echo "ldapsearch failed at producer ($RC)!"
374 test $KILLSERVERS != no && kill -HUP $KILLPIDS
378 echo "Using ldapsearch to read all the entries from the consumer..."
379 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
380 'objectclass=*' > $SLAVEOUT 2>&1
383 if test $RC != 0 ; then
384 echo "ldapsearch failed at consumer ($RC)!"
385 test $KILLSERVERS != no && kill -HUP $KILLPIDS
389 test $KILLSERVERS != no && kill -HUP $KILLPIDS
391 echo "Filtering producer results..."
392 $LDIFFILTER < $MASTEROUT > $MASTERFLT
393 echo "Filtering consumer results..."
394 $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
396 echo "Comparing retrieved entries from producer and consumer..."
397 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
399 if test $? != 0 ; then
400 echo "test failed - producer and consumer databases differ"
404 echo ">>>>> Test succeeded"
406 test $KILLSERVERS != no && wait