3 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
5 ## Copyright 1998-2009 The OpenLDAP Foundation.
6 ## All rights reserved.
8 ## Redistribution and use in source and binary forms, with or without
9 ## modification, are permitted only as authorized by the OpenLDAP
12 ## A copy of this license is available in the file LICENSE in the
13 ## top-level directory of the distribution or, alternatively, at
14 ## <http://www.OpenLDAP.org/license.html>.
16 echo "running defines.sh"
17 . $SRCDIR/scripts/defines.sh
19 if test $SYNCPROV = syncprovno; then
20 echo "Syncrepl provider overlay not available, test skipped"
31 mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
33 $SLAPPASSWD -g -n >$CONFIGPWF
35 if test x"$SYNCMODE" = x ; then
40 SYNCTYPE="type=refreshOnly interval=00:00:00:03"
43 SYNCTYPE="type=refreshAndPersist"
46 echo "unknown sync mode $SYNCMODE"
52 # Test replication of dynamic config:
55 # - configure over ldap
56 # - populate over ldap
57 # - configure syncrepl over ldap
58 # - retrieve database over ldap and compare against expected results
61 echo "Starting producer slapd on TCP/IP port $PORT1..."
62 . $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
63 $SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
65 $SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
67 if test $WAIT != 0 ; then
76 echo "Using ldapsearch to check that producer slapd is running..."
77 for i in 0 1 2 3 4 5; do
78 $LDAPSEARCH -s base -b "" -H $URI1 \
79 'objectclass=*' > /dev/null 2>&1
81 if test $RC = 0 ; then
84 echo "Waiting 5 seconds for slapd to start..."
88 if test $RC != 0 ; then
89 echo "ldapsearch failed ($RC)!"
90 test $KILLSERVERS != no && kill -HUP $KILLPIDS
94 echo "Inserting syncprov overlay on producer..."
95 if [ "$SYNCPROV" = syncprovmod ]; then
96 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
97 dn: cn=module,cn=config
98 objectClass: olcModuleList
100 olcModulePath: ../../../servers/slapd/overlays
101 olcModuleLoad: syncprov.la
104 if test $RC != 0 ; then
105 echo "ldapadd failed for moduleLoad ($RC)!"
106 test $KILLSERVERS != no && kill -HUP $KILLPIDS
110 read CONFIGPW < $CONFIGPWF
111 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
112 dn: olcDatabase={0}config,cn=config
115 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
116 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
117 retry="3 5 300 5" timeout=3
122 dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
124 objectClass: olcOverlayConfig
125 objectClass: olcSyncProvConfig
129 if test $RC != 0 ; then
130 echo "ldapmodify failed for syncrepl config ($RC)!"
131 test $KILLSERVERS != no && kill -HUP $KILLPIDS
135 echo "Starting consumer slapd on TCP/IP port $PORT2..."
136 $SLAPADD -F $CFCON -n 0 -l $CONFLDIF
138 $SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
140 if test $WAIT != 0 ; then
141 echo SLAVEPID $SLAVEPID
144 KILLPIDS="$KILLPIDS $SLAVEPID"
149 echo "Using ldapsearch to check that consumer slapd is running..."
150 for i in 0 1 2 3 4 5; do
151 $LDAPSEARCH -s base -b "" -H $URI2 \
152 'objectclass=*' > /dev/null 2>&1
154 if test $RC = 0 ; then
157 echo "Waiting 5 seconds for slapd to start..."
161 if test $RC != 0 ; then
162 echo "ldapsearch failed ($RC)!"
163 test $KILLSERVERS != no && kill -HUP $KILLPIDS
167 echo "Configuring syncrepl on consumer..."
168 $LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
169 dn: olcDatabase={0}config,cn=config
172 olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
173 credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
174 retry="3 5 300 5" timeout=3
180 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
183 echo "Using ldapsearch to check that syncrepl received config changes..."
185 for i in 0 1 2 3 4 5; do
186 RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \
187 -s base -b "olcDatabase={0}config,cn=config" \
188 '(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
189 if test "x$RESULT" = "xOK" ; then
193 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
197 if test $RC != 0 ; then
198 echo "ldapsearch failed ($RC)!"
199 test $KILLSERVERS != no && kill -HUP $KILLPIDS
203 echo "Adding schema and databases on producer..."
204 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
205 include: file://$ABS_SCHEMADIR/core.ldif
207 include: file://$ABS_SCHEMADIR/cosine.ldif
209 include: file://$ABS_SCHEMADIR/inetorgperson.ldif
211 include: file://$ABS_SCHEMADIR/openldap.ldif
213 include: file://$ABS_SCHEMADIR/nis.ldif
216 if test $RC != 0 ; then
217 echo "ldapadd failed for schema config ($RC)!"
218 test $KILLSERVERS != no && kill -HUP $KILLPIDS
222 if [ "$BACKENDTYPE" = mod ]; then
223 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
224 dn: cn=module,cn=config
225 objectClass: olcModuleList
227 olcModulePath: ../../../servers/slapd/back-$BACKEND
228 olcModuleLoad: back_$BACKEND.la
231 if test $RC != 0 ; then
232 echo "ldapadd failed for backend config ($RC)!"
233 test $KILLSERVERS != no && kill -HUP $KILLPIDS
238 $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
239 dn: olcDatabase={1}$BACKEND,cn=config
240 objectClass: olcDatabaseConfig
241 objectClass: olc${BACKEND}Config
242 olcDatabase: {1}$BACKEND
245 olcRootDN: $MANAGERDN
247 olcSyncRepl: rid=002 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
248 credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
249 retry="3 5 300 5" timeout=3
252 dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
254 objectClass: olcOverlayConfig
255 objectClass: olcSyncProvConfig
259 if test $RC != 0 ; then
260 echo "ldapadd failed for database config ($RC)!"
261 test $KILLSERVERS != no && kill -HUP $KILLPIDS
267 $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
268 dn: olcDatabase={1}$BACKEND,cn=config
271 olcDbIndex: objectClass,entryUUID,entryCSN eq
272 olcDbIndex: cn,uid pres,eq,sub
275 if test $RC != 0 ; then
276 echo "ldapadd modify for database config ($RC)!"
277 test $KILLSERVERS != no && kill -HUP $KILLPIDS
283 echo "Using ldapadd to populate producer..."
284 $LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
287 if test $RC != 0 ; then
288 echo "ldapadd failed for database config ($RC)!"
289 test $KILLSERVERS != no && kill -HUP $KILLPIDS
293 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
296 echo "Using ldapsearch to check that syncrepl received database changes..."
298 for i in 0 1 2 3 4 5; do
299 RESULT=`$LDAPSEARCH -H $URI2 \
300 -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
301 '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
302 if test "x$RESULT" = "xOK" ; then
306 echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
310 if test $RC != 0 ; then
311 echo "ldapsearch failed ($RC)!"
312 test $KILLSERVERS != no && kill -HUP $KILLPIDS
316 echo "Using ldapsearch to read config from the producer..."
317 $LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
318 'objectclass=*' > $MASTEROUT 2>&1
321 if test $RC != 0 ; then
322 echo "ldapsearch failed at producer ($RC)!"
323 test $KILLSERVERS != no && kill -HUP $KILLPIDS
327 echo "Using ldapsearch to read config from the consumer..."
328 $LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
329 'objectclass=*' > $SLAVEOUT 2>&1
332 if test $RC != 0 ; then
333 echo "ldapsearch failed at consumer ($RC)!"
334 test $KILLSERVERS != no && kill -HUP $KILLPIDS
338 echo "Filtering producer results..."
339 . $LDIFFILTER < $MASTEROUT > $MASTERFLT
340 echo "Filtering consumer results..."
341 . $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
343 echo "Comparing retrieved configs from producer and consumer..."
344 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
346 if test $? != 0 ; then
347 echo "test failed - producer and consumer configs differ"
348 test $KILLSERVERS != no && kill -HUP $KILLPIDS
352 echo "Using ldapsearch to read all the entries from the producer..."
353 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
354 'objectclass=*' > $MASTEROUT 2>&1
357 if test $RC != 0 ; then
358 echo "ldapsearch failed at producer ($RC)!"
359 test $KILLSERVERS != no && kill -HUP $KILLPIDS
363 echo "Using ldapsearch to read all the entries from the consumer..."
364 $LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
365 'objectclass=*' > $SLAVEOUT 2>&1
368 if test $RC != 0 ; then
369 echo "ldapsearch failed at consumer ($RC)!"
370 test $KILLSERVERS != no && kill -HUP $KILLPIDS
374 test $KILLSERVERS != no && kill -HUP $KILLPIDS
376 echo "Filtering producer results..."
377 . $LDIFFILTER < $MASTEROUT > $MASTERFLT
378 echo "Filtering consumer results..."
379 . $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
381 echo "Comparing retrieved entries from producer and consumer..."
382 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
384 if test $? != 0 ; then
385 echo "test failed - producer and consumer databases differ"
389 echo ">>>>> Test succeeded"
391 test $KILLSERVERS != no && wait