2 * FreeRTOS Kernel V10.2.0
\r
3 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
\r
5 * Permission is hereby granted, free of charge, to any person obtaining a copy of
\r
6 * this software and associated documentation files (the "Software"), to deal in
\r
7 * the Software without restriction, including without limitation the rights to
\r
8 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
\r
9 * the Software, and to permit persons to whom the Software is furnished to do so,
\r
10 * subject to the following conditions:
\r
12 * The above copyright notice and this permission notice shall be included in all
\r
13 * copies or substantial portions of the Software.
\r
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
\r
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
\r
17 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
\r
18 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
\r
19 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\r
20 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
\r
22 * http://www.FreeRTOS.org
\r
23 * http://aws.amazon.com/freertos
\r
25 * 1 tab == 4 spaces!
\r
28 #ifndef FREERTOS_CONFIG_H
\r
29 #define FREERTOS_CONFIG_H
\r
31 /*-----------------------------------------------------------
\r
32 * Application specific definitions.
\r
34 * These definitions should be adjusted for your particular hardware and
\r
35 * application requirements.
\r
37 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
\r
38 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
\r
39 * http://www.freertos.org/a00110.html
\r
41 * The bottom of this file contains some constants specific to running the UDP
\r
42 * stack in this demo. Constants specific to FreeRTOS+UDP itself (rather than
\r
43 * the demo) are contained in FreeRTOSIPConfig.h.
\r
44 *----------------------------------------------------------*/
\r
46 #define configUSE_PREEMPTION 1
\r
47 #define configMAX_PRIORITIES ( 7 )
\r
48 #define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */
\r
49 #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */
\r
50 #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 32U * 1024U ) )
\r
51 #define configMAX_TASK_NAME_LEN ( 7 )
\r
52 #define configUSE_TRACE_FACILITY 1
\r
53 #define configUSE_16_BIT_TICKS 0
\r
54 #define configIDLE_SHOULD_YIELD 1
\r
55 #define configUSE_CO_ROUTINES 0
\r
56 #define configUSE_MUTEXES 1
\r
57 #define configUSE_RECURSIVE_MUTEXES 1
\r
58 #define configQUEUE_REGISTRY_SIZE 0
\r
59 #define configUSE_APPLICATION_TASK_TAG 0
\r
60 #define configUSE_COUNTING_SEMAPHORES 1
\r
61 #define configUSE_ALTERNATIVE_API 0
\r
63 /* Hook function related definitions. */
\r
64 #define configUSE_TICK_HOOK 0
\r
65 #define configUSE_IDLE_HOOK 1
\r
66 #define configUSE_MALLOC_FAILED_HOOK 1
\r
67 #define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */
\r
69 /* Software timer related definitions. */
\r
70 #define configUSE_TIMERS 1
\r
71 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
\r
72 #define configTIMER_QUEUE_LENGTH 5
\r
73 #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 )
\r
75 /* Run time stats gathering definitions. */
\r
76 unsigned long ulGetRunTimeCounterValue( void );
\r
77 void vConfigureTimerForRunTimeStats( void );
\r
78 #define configGENERATE_RUN_TIME_STATS 1
\r
79 #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats()
\r
80 #define portGET_RUN_TIME_COUNTER_VALUE() ulGetRunTimeCounterValue()
\r
82 /* Co-routine definitions. */
\r
83 #define configUSE_CO_ROUTINES 0
\r
84 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
\r
86 /* Set the following definitions to 1 to include the API function, or zero
\r
87 to exclude the API function. */
\r
88 #define INCLUDE_vTaskPrioritySet 1
\r
89 #define INCLUDE_uxTaskPriorityGet 1
\r
90 #define INCLUDE_vTaskDelete 1
\r
91 #define INCLUDE_vTaskCleanUpResources 0
\r
92 #define INCLUDE_vTaskSuspend 1
\r
93 #define INCLUDE_vTaskDelayUntil 1
\r
94 #define INCLUDE_vTaskDelay 1
\r
95 #define INCLUDE_uxTaskGetStackHighWaterMark 1
\r
96 #define INCLUDE_xTaskGetSchedulerState 1
\r
97 #define INCLUDE_xTimerGetTimerTaskHandle 0
\r
98 #define INCLUDE_xTaskGetIdleTaskHandle 0
\r
99 #define INCLUDE_xQueueGetMutexHolder 1
\r
100 #define INCLUDE_xTaskGetCurrentTaskHandle 1
\r
102 /* This demo makes use of one or more example stats formatting functions. These
\r
103 format the raw data provided by the uxTaskGetSystemState() function in to human
\r
104 readable ASCII form. See the notes in the implementation of vTaskList() within
\r
105 FreeRTOS/Source/tasks.c for limitations. */
\r
106 #define configUSE_STATS_FORMATTING_FUNCTIONS 1
\r
108 /* Assert call defined for debug builds. */
\r
110 extern void vAssertCalled( const char *pcFile, unsigned long ulLine );
\r
111 #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ )
\r
112 #endif /* _DEBUG */
\r
116 /* Application specific definitions follow. **********************************/
\r
118 /* The UDP port to use for incoming command inputs. The outgoing port is
\r
119 set to ( configUDP_CLI_PORT_NUMBER + 1 ). */
\r
120 #define configUDP_CLI_PORT_NUMBER 5001
\r
122 /* The size of the global output buffer that is available for use when there
\r
123 are multiple command interpreters running at once (for example, one on a UART
\r
124 and one on TCP/IP). This is done to prevent an output buffer being defined by
\r
125 each implementation - which would waste RAM. In this case, there is only one
\r
126 command interpreter running, and it has its own local output buffer, so the
\r
127 global buffer is just set to be one byte long as it is not used and should not
\r
128 take up unnecessary RAM. */
\r
129 #define configCOMMAND_INT_MAX_OUTPUT_SIZE 1
\r
131 #endif /* FREERTOS_CONFIG_H */
\r
projects / freertos / blob