4 * Copyright (c) 2013 Atmel Corporation. All rights reserved.
\r
10 * Redistribution and use in source and binary forms, with or without
\r
11 * modification, are permitted provided that the following conditions are met:
\r
13 * 1. Redistributions of source code must retain the above copyright notice,
\r
14 * this list of conditions and the following disclaimer.
\r
16 * 2. Redistributions in binary form must reproduce the above copyright notice,
\r
17 * this list of conditions and the following disclaimer in the documentation
\r
18 * and/or other materials provided with the distribution.
\r
20 * 3. The name of Atmel may not be used to endorse or promote products derived
\r
21 * from this software without specific prior written permission.
\r
23 * 4. This software may only be redistributed and used in connection with an
\r
24 * Atmel microcontroller product.
\r
26 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
\r
27 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
\r
28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
\r
29 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
\r
30 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
\r
31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
\r
32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
\r
33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
\r
34 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
\r
35 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
\r
36 * POSSIBILITY OF SUCH DAMAGE.
\r
42 #ifndef _SAM4E_SUPC_COMPONENT_
\r
43 #define _SAM4E_SUPC_COMPONENT_
\r
45 /* ============================================================================= */
\r
46 /** SOFTWARE API DEFINITION FOR Supply Controller */
\r
47 /* ============================================================================= */
\r
48 /** \addtogroup SAM4E_SUPC Supply Controller */
\r
51 #if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
\r
52 /** \brief Supc hardware registers */
\r
54 WoReg SUPC_CR; /**< \brief (Supc Offset: 0x00) Supply Controller Control Register */
\r
55 RwReg SUPC_SMMR; /**< \brief (Supc Offset: 0x04) Supply Controller Supply Monitor Mode Register */
\r
56 RwReg SUPC_MR; /**< \brief (Supc Offset: 0x08) Supply Controller Mode Register */
\r
57 RwReg SUPC_WUMR; /**< \brief (Supc Offset: 0x0C) Supply Controller Wake-up Mode Register */
\r
58 RwReg SUPC_WUIR; /**< \brief (Supc Offset: 0x10) Supply Controller Wake-up Inputs Register */
\r
59 RoReg SUPC_SR; /**< \brief (Supc Offset: 0x14) Supply Controller Status Register */
\r
61 #endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
\r
62 /* -------- SUPC_CR : (SUPC Offset: 0x00) Supply Controller Control Register -------- */
\r
63 #define SUPC_CR_VROFF (0x1u << 2) /**< \brief (SUPC_CR) Voltage Regulator Off */
\r
64 #define SUPC_CR_VROFF_NO_EFFECT (0x0u << 2) /**< \brief (SUPC_CR) no effect. */
\r
65 #define SUPC_CR_VROFF_STOP_VREG (0x1u << 2) /**< \brief (SUPC_CR) if KEY is correct, asserts the vddcore_nreset and stops the voltage regulator. */
\r
66 #define SUPC_CR_XTALSEL (0x1u << 3) /**< \brief (SUPC_CR) Crystal Oscillator Select */
\r
67 #define SUPC_CR_XTALSEL_NO_EFFECT (0x0u << 3) /**< \brief (SUPC_CR) no effect. */
\r
68 #define SUPC_CR_XTALSEL_CRYSTAL_SEL (0x1u << 3) /**< \brief (SUPC_CR) if KEY is correct, switches the slow clock on the crystal oscillator output. */
\r
69 #define SUPC_CR_KEY_Pos 24
\r
70 #define SUPC_CR_KEY_Msk (0xffu << SUPC_CR_KEY_Pos) /**< \brief (SUPC_CR) Password */
\r
71 #define SUPC_CR_KEY(value) ((SUPC_CR_KEY_Msk & ((value) << SUPC_CR_KEY_Pos)))
\r
72 /* -------- SUPC_SMMR : (SUPC Offset: 0x04) Supply Controller Supply Monitor Mode Register -------- */
\r
73 #define SUPC_SMMR_SMTH_Pos 0
\r
74 #define SUPC_SMMR_SMTH_Msk (0xfu << SUPC_SMMR_SMTH_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Threshold */
\r
75 #define SUPC_SMMR_SMTH(value) ((SUPC_SMMR_SMTH_Msk & ((value) << SUPC_SMMR_SMTH_Pos)))
\r
76 #define SUPC_SMMR_SMSMPL_Pos 8
\r
77 #define SUPC_SMMR_SMSMPL_Msk (0x7u << SUPC_SMMR_SMSMPL_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Sampling Period */
\r
78 #define SUPC_SMMR_SMSMPL_SMD (0x0u << 8) /**< \brief (SUPC_SMMR) Supply Monitor disabled */
\r
79 #define SUPC_SMMR_SMSMPL_CSM (0x1u << 8) /**< \brief (SUPC_SMMR) Continuous Supply Monitor */
\r
80 #define SUPC_SMMR_SMSMPL_32SLCK (0x2u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 32 SLCK periods */
\r
81 #define SUPC_SMMR_SMSMPL_256SLCK (0x3u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 256 SLCK periods */
\r
82 #define SUPC_SMMR_SMSMPL_2048SLCK (0x4u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 2,048 SLCK periods */
\r
83 #define SUPC_SMMR_SMRSTEN (0x1u << 12) /**< \brief (SUPC_SMMR) Supply Monitor Reset Enable */
\r
84 #define SUPC_SMMR_SMRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_SMMR) the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs. */
\r
85 #define SUPC_SMMR_SMRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_SMMR) the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs. */
\r
86 #define SUPC_SMMR_SMIEN (0x1u << 13) /**< \brief (SUPC_SMMR) Supply Monitor Interrupt Enable */
\r
87 #define SUPC_SMMR_SMIEN_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is not affected when a supply monitor detection occurs. */
\r
88 #define SUPC_SMMR_SMIEN_ENABLE (0x1u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is asserted when a supply monitor detection occurs. */
\r
89 /* -------- SUPC_MR : (SUPC Offset: 0x08) Supply Controller Mode Register -------- */
\r
90 #define SUPC_MR_BODRSTEN (0x1u << 12) /**< \brief (SUPC_MR) Brownout Detector Reset Enable */
\r
91 #define SUPC_MR_BODRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_MR) the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs. */
\r
92 #define SUPC_MR_BODRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_MR) the core reset signal, vddcore_nreset is asserted when a brownout detection occurs. */
\r
93 #define SUPC_MR_BODDIS (0x1u << 13) /**< \brief (SUPC_MR) Brownout Detector Disable */
\r
94 #define SUPC_MR_BODDIS_ENABLE (0x0u << 13) /**< \brief (SUPC_MR) the core brownout detector is enabled. */
\r
95 #define SUPC_MR_BODDIS_DISABLE (0x1u << 13) /**< \brief (SUPC_MR) the core brownout detector is disabled. */
\r
96 #define SUPC_MR_ONREG (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator enable */
\r
97 #define SUPC_MR_ONREG_ONREG_UNUSED (0x0u << 14) /**< \brief (SUPC_MR) Internal voltage regulator is not used (external power supply is used) */
\r
98 #define SUPC_MR_ONREG_ONREG_USED (0x1u << 14) /**< \brief (SUPC_MR) internal voltage regulator is used */
\r
99 #define SUPC_MR_OSCBYPASS (0x1u << 20) /**< \brief (SUPC_MR) Oscillator Bypass */
\r
100 #define SUPC_MR_OSCBYPASS_NO_EFFECT (0x0u << 20) /**< \brief (SUPC_MR) no effect. Clock selection depends on XTALSEL value. */
\r
101 #define SUPC_MR_OSCBYPASS_BYPASS (0x1u << 20) /**< \brief (SUPC_MR) the 32-KHz XTAL oscillator is selected and is put in bypass mode. */
\r
102 #define SUPC_MR_KEY_Pos 24
\r
103 #define SUPC_MR_KEY_Msk (0xffu << SUPC_MR_KEY_Pos) /**< \brief (SUPC_MR) Password Key */
\r
104 #define SUPC_MR_KEY(value) ((SUPC_MR_KEY_Msk & ((value) << SUPC_MR_KEY_Pos)))
\r
105 /* -------- SUPC_WUMR : (SUPC Offset: 0x0C) Supply Controller Wake-up Mode Register -------- */
\r
106 #define SUPC_WUMR_FWUPEN (0x1u << 0) /**< \brief (SUPC_WUMR) Force Wake-up Enable */
\r
107 #define SUPC_WUMR_FWUPEN_NOT_ENABLE (0x0u << 0) /**< \brief (SUPC_WUMR) the Force Wake-up pin has no wake-up effect. */
\r
108 #define SUPC_WUMR_FWUPEN_ENABLE (0x1u << 0) /**< \brief (SUPC_WUMR) the Force Wake-up pin low forces the wake-up of the core power supply. */
\r
109 #define SUPC_WUMR_SMEN (0x1u << 1) /**< \brief (SUPC_WUMR) Supply Monitor Wake-up Enable */
\r
110 #define SUPC_WUMR_SMEN_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection has no wake-up effect. */
\r
111 #define SUPC_WUMR_SMEN_ENABLE (0x1u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection forces the wake-up of the core power supply. */
\r
112 #define SUPC_WUMR_RTTEN (0x1u << 2) /**< \brief (SUPC_WUMR) Real Time Timer Wake-up Enable */
\r
113 #define SUPC_WUMR_RTTEN_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal has no wake-up effect. */
\r
114 #define SUPC_WUMR_RTTEN_ENABLE (0x1u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal forces the wake-up of the core power supply. */
\r
115 #define SUPC_WUMR_RTCEN (0x1u << 3) /**< \brief (SUPC_WUMR) Real Time Clock Wake-up Enable */
\r
116 #define SUPC_WUMR_RTCEN_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal has no wake-up effect. */
\r
117 #define SUPC_WUMR_RTCEN_ENABLE (0x1u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal forces the wake-up of the core power supply. */
\r
118 #define SUPC_WUMR_LPDBCEN0 (0x1u << 5) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP0 */
\r
119 #define SUPC_WUMR_LPDBCEN0_NOT_ENABLE (0x0u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is not connected with low power debouncer. */
\r
120 #define SUPC_WUMR_LPDBCEN0_ENABLE (0x1u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is connected with low power debouncer and can force a core wake-up. */
\r
121 #define SUPC_WUMR_LPDBCEN1 (0x1u << 6) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP1 */
\r
122 #define SUPC_WUMR_LPDBCEN1_NOT_ENABLE (0x0u << 6) /**< \brief (SUPC_WUMR) the WKUP1input pin is not connected with low power debouncer. */
\r
123 #define SUPC_WUMR_LPDBCEN1_ENABLE (0x1u << 6) /**< \brief (SUPC_WUMR) the WKUP1 input pin is connected with low power debouncer and can force a core wake-up. */
\r
124 #define SUPC_WUMR_LPDBCCLR (0x1u << 7) /**< \brief (SUPC_WUMR) Low power Debouncer Clear */
\r
125 #define SUPC_WUMR_LPDBCCLR_NOT_ENABLE (0x0u << 7) /**< \brief (SUPC_WUMR) a low power debounce event does not create an immediate clear on first half GPBR registers. */
\r
126 #define SUPC_WUMR_LPDBCCLR_ENABLE (0x1u << 7) /**< \brief (SUPC_WUMR) a low power debounce event on WKUP0 or WKUP1 generates an immediate clear on first half GPBR registers. */
\r
127 #define SUPC_WUMR_FWUPDBC_Pos 8
\r
128 #define SUPC_WUMR_FWUPDBC_Msk (0x7u << SUPC_WUMR_FWUPDBC_Pos) /**< \brief (SUPC_WUMR) Force Wake-up Debouncer Period */
\r
129 #define SUPC_WUMR_FWUPDBC_IMMEDIATE (0x0u << 8) /**< \brief (SUPC_WUMR) Immediate, no debouncing, detected active at least on one Slow Clock edge. */
\r
130 #define SUPC_WUMR_FWUPDBC_3_SCLK (0x1u << 8) /**< \brief (SUPC_WUMR) FWUP shall be low for at least 3 SLCK periods */
\r
131 #define SUPC_WUMR_FWUPDBC_32_SCLK (0x2u << 8) /**< \brief (SUPC_WUMR) FWUP shall be low for at least 32 SLCK periods */
\r
132 #define SUPC_WUMR_FWUPDBC_512_SCLK (0x3u << 8) /**< \brief (SUPC_WUMR) FWUP shall be low for at least 512 SLCK periods */
\r
133 #define SUPC_WUMR_FWUPDBC_4096_SCLK (0x4u << 8) /**< \brief (SUPC_WUMR) FWUP shall be low for at least 4,096 SLCK periods */
\r
134 #define SUPC_WUMR_FWUPDBC_32768_SCLK (0x5u << 8) /**< \brief (SUPC_WUMR) FWUP shall be low for at least 32,768 SLCK periods */
\r
135 #define SUPC_WUMR_WKUPDBC_Pos 12
\r
136 #define SUPC_WUMR_WKUPDBC_Msk (0x7u << SUPC_WUMR_WKUPDBC_Pos) /**< \brief (SUPC_WUMR) Wake-up Inputs Debouncer Period */
\r
137 #define SUPC_WUMR_WKUPDBC_IMMEDIATE (0x0u << 12) /**< \brief (SUPC_WUMR) Immediate, no debouncing, detected active at least on one Slow Clock edge. */
\r
138 #define SUPC_WUMR_WKUPDBC_3_SCLK (0x1u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 3 SLCK periods */
\r
139 #define SUPC_WUMR_WKUPDBC_32_SCLK (0x2u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32 SLCK periods */
\r
140 #define SUPC_WUMR_WKUPDBC_512_SCLK (0x3u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 512 SLCK periods */
\r
141 #define SUPC_WUMR_WKUPDBC_4096_SCLK (0x4u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 4,096 SLCK periods */
\r
142 #define SUPC_WUMR_WKUPDBC_32768_SCLK (0x5u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32,768 SLCK periods */
\r
143 #define SUPC_WUMR_LPDBC_Pos 16
\r
144 #define SUPC_WUMR_LPDBC_Msk (0x7u << SUPC_WUMR_LPDBC_Pos) /**< \brief (SUPC_WUMR) Low Power DeBounCer Period */
\r
145 #define SUPC_WUMR_LPDBC_DISABLE (0x0u << 16) /**< \brief (SUPC_WUMR) Disable the low power debouncer. */
\r
146 #define SUPC_WUMR_LPDBC_2_RTCOUT0 (0x1u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 2 RTCOUT0 periods */
\r
147 #define SUPC_WUMR_LPDBC_3_RTCOUT0 (0x2u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 3 RTCOUT0 periods */
\r
148 #define SUPC_WUMR_LPDBC_4_RTCOUT0 (0x3u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 4 RTCOUT0 periods */
\r
149 #define SUPC_WUMR_LPDBC_5_RTCOUT0 (0x4u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 5 RTCOUT0 periods */
\r
150 #define SUPC_WUMR_LPDBC_6_RTCOUT0 (0x5u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 6 RTCOUT0 periods */
\r
151 #define SUPC_WUMR_LPDBC_7_RTCOUT0 (0x6u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 7 RTCOUT0 periods */
\r
152 #define SUPC_WUMR_LPDBC_8_RTCOUT0 (0x7u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 8 RTCOUT0 periods */
\r
153 /* -------- SUPC_WUIR : (SUPC Offset: 0x10) Supply Controller Wake-up Inputs Register -------- */
\r
154 #define SUPC_WUIR_WKUPEN0 (0x1u << 0) /**< \brief (SUPC_WUIR) Wake-up Input Enable 0 */
\r
155 #define SUPC_WUIR_WKUPEN0_DISABLE (0x0u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
156 #define SUPC_WUIR_WKUPEN0_ENABLE (0x1u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
157 #define SUPC_WUIR_WKUPEN1 (0x1u << 1) /**< \brief (SUPC_WUIR) Wake-up Input Enable 1 */
\r
158 #define SUPC_WUIR_WKUPEN1_DISABLE (0x0u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
159 #define SUPC_WUIR_WKUPEN1_ENABLE (0x1u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
160 #define SUPC_WUIR_WKUPEN2 (0x1u << 2) /**< \brief (SUPC_WUIR) Wake-up Input Enable 2 */
\r
161 #define SUPC_WUIR_WKUPEN2_DISABLE (0x0u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
162 #define SUPC_WUIR_WKUPEN2_ENABLE (0x1u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
163 #define SUPC_WUIR_WKUPEN3 (0x1u << 3) /**< \brief (SUPC_WUIR) Wake-up Input Enable 3 */
\r
164 #define SUPC_WUIR_WKUPEN3_DISABLE (0x0u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
165 #define SUPC_WUIR_WKUPEN3_ENABLE (0x1u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
166 #define SUPC_WUIR_WKUPEN4 (0x1u << 4) /**< \brief (SUPC_WUIR) Wake-up Input Enable 4 */
\r
167 #define SUPC_WUIR_WKUPEN4_DISABLE (0x0u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
168 #define SUPC_WUIR_WKUPEN4_ENABLE (0x1u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
169 #define SUPC_WUIR_WKUPEN5 (0x1u << 5) /**< \brief (SUPC_WUIR) Wake-up Input Enable 5 */
\r
170 #define SUPC_WUIR_WKUPEN5_DISABLE (0x0u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
171 #define SUPC_WUIR_WKUPEN5_ENABLE (0x1u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
172 #define SUPC_WUIR_WKUPEN6 (0x1u << 6) /**< \brief (SUPC_WUIR) Wake-up Input Enable 6 */
\r
173 #define SUPC_WUIR_WKUPEN6_DISABLE (0x0u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
174 #define SUPC_WUIR_WKUPEN6_ENABLE (0x1u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
175 #define SUPC_WUIR_WKUPEN7 (0x1u << 7) /**< \brief (SUPC_WUIR) Wake-up Input Enable 7 */
\r
176 #define SUPC_WUIR_WKUPEN7_DISABLE (0x0u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
177 #define SUPC_WUIR_WKUPEN7_ENABLE (0x1u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
178 #define SUPC_WUIR_WKUPEN8 (0x1u << 8) /**< \brief (SUPC_WUIR) Wake-up Input Enable 8 */
\r
179 #define SUPC_WUIR_WKUPEN8_DISABLE (0x0u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
180 #define SUPC_WUIR_WKUPEN8_ENABLE (0x1u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
181 #define SUPC_WUIR_WKUPEN9 (0x1u << 9) /**< \brief (SUPC_WUIR) Wake-up Input Enable 9 */
\r
182 #define SUPC_WUIR_WKUPEN9_DISABLE (0x0u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
183 #define SUPC_WUIR_WKUPEN9_ENABLE (0x1u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
184 #define SUPC_WUIR_WKUPEN10 (0x1u << 10) /**< \brief (SUPC_WUIR) Wake-up Input Enable 10 */
\r
185 #define SUPC_WUIR_WKUPEN10_DISABLE (0x0u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
186 #define SUPC_WUIR_WKUPEN10_ENABLE (0x1u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
187 #define SUPC_WUIR_WKUPEN11 (0x1u << 11) /**< \brief (SUPC_WUIR) Wake-up Input Enable 11 */
\r
188 #define SUPC_WUIR_WKUPEN11_DISABLE (0x0u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
189 #define SUPC_WUIR_WKUPEN11_ENABLE (0x1u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
190 #define SUPC_WUIR_WKUPEN12 (0x1u << 12) /**< \brief (SUPC_WUIR) Wake-up Input Enable 12 */
\r
191 #define SUPC_WUIR_WKUPEN12_DISABLE (0x0u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
192 #define SUPC_WUIR_WKUPEN12_ENABLE (0x1u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
193 #define SUPC_WUIR_WKUPEN13 (0x1u << 13) /**< \brief (SUPC_WUIR) Wake-up Input Enable 13 */
\r
194 #define SUPC_WUIR_WKUPEN13_DISABLE (0x0u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
195 #define SUPC_WUIR_WKUPEN13_ENABLE (0x1u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
196 #define SUPC_WUIR_WKUPEN14 (0x1u << 14) /**< \brief (SUPC_WUIR) Wake-up Input Enable 14 */
\r
197 #define SUPC_WUIR_WKUPEN14_DISABLE (0x0u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
198 #define SUPC_WUIR_WKUPEN14_ENABLE (0x1u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
199 #define SUPC_WUIR_WKUPEN15 (0x1u << 15) /**< \brief (SUPC_WUIR) Wake-up Input Enable 15 */
\r
200 #define SUPC_WUIR_WKUPEN15_DISABLE (0x0u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake-up effect. */
\r
201 #define SUPC_WUIR_WKUPEN15_ENABLE (0x1u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake-up of the core power supply. */
\r
202 #define SUPC_WUIR_WKUPT0 (0x1u << 16) /**< \brief (SUPC_WUIR) Wake-up Input Type 0 */
\r
203 #define SUPC_WUIR_WKUPT0_LOW (0x0u << 16) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
204 #define SUPC_WUIR_WKUPT0_HIGH (0x1u << 16) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
205 #define SUPC_WUIR_WKUPT1 (0x1u << 17) /**< \brief (SUPC_WUIR) Wake-up Input Type 1 */
\r
206 #define SUPC_WUIR_WKUPT1_LOW (0x0u << 17) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
207 #define SUPC_WUIR_WKUPT1_HIGH (0x1u << 17) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
208 #define SUPC_WUIR_WKUPT2 (0x1u << 18) /**< \brief (SUPC_WUIR) Wake-up Input Type 2 */
\r
209 #define SUPC_WUIR_WKUPT2_LOW (0x0u << 18) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
210 #define SUPC_WUIR_WKUPT2_HIGH (0x1u << 18) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
211 #define SUPC_WUIR_WKUPT3 (0x1u << 19) /**< \brief (SUPC_WUIR) Wake-up Input Type 3 */
\r
212 #define SUPC_WUIR_WKUPT3_LOW (0x0u << 19) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
213 #define SUPC_WUIR_WKUPT3_HIGH (0x1u << 19) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
214 #define SUPC_WUIR_WKUPT4 (0x1u << 20) /**< \brief (SUPC_WUIR) Wake-up Input Type 4 */
\r
215 #define SUPC_WUIR_WKUPT4_LOW (0x0u << 20) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
216 #define SUPC_WUIR_WKUPT4_HIGH (0x1u << 20) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
217 #define SUPC_WUIR_WKUPT5 (0x1u << 21) /**< \brief (SUPC_WUIR) Wake-up Input Type 5 */
\r
218 #define SUPC_WUIR_WKUPT5_LOW (0x0u << 21) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
219 #define SUPC_WUIR_WKUPT5_HIGH (0x1u << 21) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
220 #define SUPC_WUIR_WKUPT6 (0x1u << 22) /**< \brief (SUPC_WUIR) Wake-up Input Type 6 */
\r
221 #define SUPC_WUIR_WKUPT6_LOW (0x0u << 22) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
222 #define SUPC_WUIR_WKUPT6_HIGH (0x1u << 22) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
223 #define SUPC_WUIR_WKUPT7 (0x1u << 23) /**< \brief (SUPC_WUIR) Wake-up Input Type 7 */
\r
224 #define SUPC_WUIR_WKUPT7_LOW (0x0u << 23) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
225 #define SUPC_WUIR_WKUPT7_HIGH (0x1u << 23) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
226 #define SUPC_WUIR_WKUPT8 (0x1u << 24) /**< \brief (SUPC_WUIR) Wake-up Input Type 8 */
\r
227 #define SUPC_WUIR_WKUPT8_LOW (0x0u << 24) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
228 #define SUPC_WUIR_WKUPT8_HIGH (0x1u << 24) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
229 #define SUPC_WUIR_WKUPT9 (0x1u << 25) /**< \brief (SUPC_WUIR) Wake-up Input Type 9 */
\r
230 #define SUPC_WUIR_WKUPT9_LOW (0x0u << 25) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
231 #define SUPC_WUIR_WKUPT9_HIGH (0x1u << 25) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
232 #define SUPC_WUIR_WKUPT10 (0x1u << 26) /**< \brief (SUPC_WUIR) Wake-up Input Type 10 */
\r
233 #define SUPC_WUIR_WKUPT10_LOW (0x0u << 26) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
234 #define SUPC_WUIR_WKUPT10_HIGH (0x1u << 26) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
235 #define SUPC_WUIR_WKUPT11 (0x1u << 27) /**< \brief (SUPC_WUIR) Wake-up Input Type 11 */
\r
236 #define SUPC_WUIR_WKUPT11_LOW (0x0u << 27) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
237 #define SUPC_WUIR_WKUPT11_HIGH (0x1u << 27) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
238 #define SUPC_WUIR_WKUPT12 (0x1u << 28) /**< \brief (SUPC_WUIR) Wake-up Input Type 12 */
\r
239 #define SUPC_WUIR_WKUPT12_LOW (0x0u << 28) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
240 #define SUPC_WUIR_WKUPT12_HIGH (0x1u << 28) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
241 #define SUPC_WUIR_WKUPT13 (0x1u << 29) /**< \brief (SUPC_WUIR) Wake-up Input Type 13 */
\r
242 #define SUPC_WUIR_WKUPT13_LOW (0x0u << 29) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
243 #define SUPC_WUIR_WKUPT13_HIGH (0x1u << 29) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
244 #define SUPC_WUIR_WKUPT14 (0x1u << 30) /**< \brief (SUPC_WUIR) Wake-up Input Type 14 */
\r
245 #define SUPC_WUIR_WKUPT14_LOW (0x0u << 30) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
246 #define SUPC_WUIR_WKUPT14_HIGH (0x1u << 30) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
247 #define SUPC_WUIR_WKUPT15 (0x1u << 31) /**< \brief (SUPC_WUIR) Wake-up Input Type 15 */
\r
248 #define SUPC_WUIR_WKUPT15_LOW (0x0u << 31) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake-up of the core power supply. */
\r
249 #define SUPC_WUIR_WKUPT15_HIGH (0x1u << 31) /**< \brief (SUPC_WUIR) a high level for a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake-up of the core power supply. */
\r
250 /* -------- SUPC_SR : (SUPC Offset: 0x14) Supply Controller Status Register -------- */
\r
251 #define SUPC_SR_FWUPS (0x1u << 0) /**< \brief (SUPC_SR) FWUP Wake-up Status */
\r
252 #define SUPC_SR_FWUPS_NO (0x0u << 0) /**< \brief (SUPC_SR) no wake-up due to the assertion of the FWUP pin has occurred since the last read of SUPC_SR. */
\r
253 #define SUPC_SR_FWUPS_PRESENT (0x1u << 0) /**< \brief (SUPC_SR) at least one wake-up due to the assertion of the FWUP pin has occurred since the last read of SUPC_SR. */
\r
254 #define SUPC_SR_WKUPS (0x1u << 1) /**< \brief (SUPC_SR) WKUP Wake-up Status */
\r
255 #define SUPC_SR_WKUPS_NO (0x0u << 1) /**< \brief (SUPC_SR) no wake-up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
\r
256 #define SUPC_SR_WKUPS_PRESENT (0x1u << 1) /**< \brief (SUPC_SR) at least one wake-up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
\r
257 #define SUPC_SR_SMWS (0x1u << 2) /**< \brief (SUPC_SR) Supply Monitor Detection Wake-up Status */
\r
258 #define SUPC_SR_SMWS_NO (0x0u << 2) /**< \brief (SUPC_SR) no wake-up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
\r
259 #define SUPC_SR_SMWS_PRESENT (0x1u << 2) /**< \brief (SUPC_SR) at least one wake-up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
\r
260 #define SUPC_SR_BODRSTS (0x1u << 3) /**< \brief (SUPC_SR) Brownout Detector Reset Status */
\r
261 #define SUPC_SR_BODRSTS_NO (0x0u << 3) /**< \brief (SUPC_SR) no core brownout rising edge event has been detected since the last read of the SUPC_SR. */
\r
262 #define SUPC_SR_BODRSTS_PRESENT (0x1u << 3) /**< \brief (SUPC_SR) at least one brownout output rising edge event has been detected since the last read of the SUPC_SR. */
\r
263 #define SUPC_SR_SMRSTS (0x1u << 4) /**< \brief (SUPC_SR) Supply Monitor Reset Status */
\r
264 #define SUPC_SR_SMRSTS_NO (0x0u << 4) /**< \brief (SUPC_SR) no supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
\r
265 #define SUPC_SR_SMRSTS_PRESENT (0x1u << 4) /**< \brief (SUPC_SR) at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
\r
266 #define SUPC_SR_SMS (0x1u << 5) /**< \brief (SUPC_SR) Supply Monitor Status */
\r
267 #define SUPC_SR_SMS_NO (0x0u << 5) /**< \brief (SUPC_SR) no supply monitor detection since the last read of SUPC_SR. */
\r
268 #define SUPC_SR_SMS_PRESENT (0x1u << 5) /**< \brief (SUPC_SR) at least one supply monitor detection since the last read of SUPC_SR. */
\r
269 #define SUPC_SR_SMOS (0x1u << 6) /**< \brief (SUPC_SR) Supply Monitor Output Status */
\r
270 #define SUPC_SR_SMOS_HIGH (0x0u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO higher than its threshold at its last measurement. */
\r
271 #define SUPC_SR_SMOS_LOW (0x1u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO lower than its threshold at its last measurement. */
\r
272 #define SUPC_SR_OSCSEL (0x1u << 7) /**< \brief (SUPC_SR) 32-kHz Oscillator Selection Status */
\r
273 #define SUPC_SR_OSCSEL_RC (0x0u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator. */
\r
274 #define SUPC_SR_OSCSEL_CRYST (0x1u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the 32-kHz crystal oscillator. */
\r
275 #define SUPC_SR_FWUPIS (0x1u << 12) /**< \brief (SUPC_SR) FWUP Input Status */
\r
276 #define SUPC_SR_FWUPIS_LOW (0x0u << 12) /**< \brief (SUPC_SR) FWUP input is tied low. */
\r
277 #define SUPC_SR_FWUPIS_HIGH (0x1u << 12) /**< \brief (SUPC_SR) FWUP input is tied high. */
\r
278 #define SUPC_SR_LPDBCS0 (0x1u << 13) /**< \brief (SUPC_SR) Low Power Debouncer Wake-up Status on WKUP0 */
\r
279 #define SUPC_SR_LPDBCS0_NO (0x0u << 13) /**< \brief (SUPC_SR) no wake-up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */
\r
280 #define SUPC_SR_LPDBCS0_PRESENT (0x1u << 13) /**< \brief (SUPC_SR) at least one wake-up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */
\r
281 #define SUPC_SR_LPDBCS1 (0x1u << 14) /**< \brief (SUPC_SR) Low Power Debouncer Wake-up Status on WKUP1 */
\r
282 #define SUPC_SR_LPDBCS1_NO (0x0u << 14) /**< \brief (SUPC_SR) no wake-up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */
\r
283 #define SUPC_SR_LPDBCS1_PRESENT (0x1u << 14) /**< \brief (SUPC_SR) at least one wake-up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */
\r
284 #define SUPC_SR_WKUPIS0 (0x1u << 16) /**< \brief (SUPC_SR) WKUP Input Status 0 */
\r
285 #define SUPC_SR_WKUPIS0_DIS (0x0u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
286 #define SUPC_SR_WKUPIS0_EN (0x1u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
287 #define SUPC_SR_WKUPIS1 (0x1u << 17) /**< \brief (SUPC_SR) WKUP Input Status 1 */
\r
288 #define SUPC_SR_WKUPIS1_DIS (0x0u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
289 #define SUPC_SR_WKUPIS1_EN (0x1u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
290 #define SUPC_SR_WKUPIS2 (0x1u << 18) /**< \brief (SUPC_SR) WKUP Input Status 2 */
\r
291 #define SUPC_SR_WKUPIS2_DIS (0x0u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
292 #define SUPC_SR_WKUPIS2_EN (0x1u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
293 #define SUPC_SR_WKUPIS3 (0x1u << 19) /**< \brief (SUPC_SR) WKUP Input Status 3 */
\r
294 #define SUPC_SR_WKUPIS3_DIS (0x0u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
295 #define SUPC_SR_WKUPIS3_EN (0x1u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
296 #define SUPC_SR_WKUPIS4 (0x1u << 20) /**< \brief (SUPC_SR) WKUP Input Status 4 */
\r
297 #define SUPC_SR_WKUPIS4_DIS (0x0u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
298 #define SUPC_SR_WKUPIS4_EN (0x1u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
299 #define SUPC_SR_WKUPIS5 (0x1u << 21) /**< \brief (SUPC_SR) WKUP Input Status 5 */
\r
300 #define SUPC_SR_WKUPIS5_DIS (0x0u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
301 #define SUPC_SR_WKUPIS5_EN (0x1u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
302 #define SUPC_SR_WKUPIS6 (0x1u << 22) /**< \brief (SUPC_SR) WKUP Input Status 6 */
\r
303 #define SUPC_SR_WKUPIS6_DIS (0x0u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
304 #define SUPC_SR_WKUPIS6_EN (0x1u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
305 #define SUPC_SR_WKUPIS7 (0x1u << 23) /**< \brief (SUPC_SR) WKUP Input Status 7 */
\r
306 #define SUPC_SR_WKUPIS7_DIS (0x0u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
307 #define SUPC_SR_WKUPIS7_EN (0x1u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
308 #define SUPC_SR_WKUPIS8 (0x1u << 24) /**< \brief (SUPC_SR) WKUP Input Status 8 */
\r
309 #define SUPC_SR_WKUPIS8_DIS (0x0u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
310 #define SUPC_SR_WKUPIS8_EN (0x1u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
311 #define SUPC_SR_WKUPIS9 (0x1u << 25) /**< \brief (SUPC_SR) WKUP Input Status 9 */
\r
312 #define SUPC_SR_WKUPIS9_DIS (0x0u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
313 #define SUPC_SR_WKUPIS9_EN (0x1u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
314 #define SUPC_SR_WKUPIS10 (0x1u << 26) /**< \brief (SUPC_SR) WKUP Input Status 10 */
\r
315 #define SUPC_SR_WKUPIS10_DIS (0x0u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
316 #define SUPC_SR_WKUPIS10_EN (0x1u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
317 #define SUPC_SR_WKUPIS11 (0x1u << 27) /**< \brief (SUPC_SR) WKUP Input Status 11 */
\r
318 #define SUPC_SR_WKUPIS11_DIS (0x0u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
319 #define SUPC_SR_WKUPIS11_EN (0x1u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
320 #define SUPC_SR_WKUPIS12 (0x1u << 28) /**< \brief (SUPC_SR) WKUP Input Status 12 */
\r
321 #define SUPC_SR_WKUPIS12_DIS (0x0u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
322 #define SUPC_SR_WKUPIS12_EN (0x1u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
323 #define SUPC_SR_WKUPIS13 (0x1u << 29) /**< \brief (SUPC_SR) WKUP Input Status 13 */
\r
324 #define SUPC_SR_WKUPIS13_DIS (0x0u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
325 #define SUPC_SR_WKUPIS13_EN (0x1u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
326 #define SUPC_SR_WKUPIS14 (0x1u << 30) /**< \brief (SUPC_SR) WKUP Input Status 14 */
\r
327 #define SUPC_SR_WKUPIS14_DIS (0x0u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
328 #define SUPC_SR_WKUPIS14_EN (0x1u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
329 #define SUPC_SR_WKUPIS15 (0x1u << 31) /**< \brief (SUPC_SR) WKUP Input Status 15 */
\r
330 #define SUPC_SR_WKUPIS15_DIS (0x0u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake-up event. */
\r
331 #define SUPC_SR_WKUPIS15_EN (0x1u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake-up event. */
\r
336 #endif /* _SAM4E_SUPC_COMPONENT_ */
\r
projects / freertos / blob