[freertos] /

/******************************************************************************
*
* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/****************************************************************************/
/**
*
* @file xuartps.h
*
* This driver supports the following features:
*
* - Dynamic data format (baud rate, data bits, stop bits, parity)
* - Polled mode
* - Interrupt driven mode
* - Transmit and receive FIFOs (32 byte FIFO depth)
* - Access to the external modem control lines
*
* <b>Initialization & Configuration</b>
*
* The XUartPs_Config structure is used by the driver to configure itself.
* Fields inside this structure are properties of XUartPs based on its hardware
* build.
*
* To support multiple runtime loading and initialization strategies employed
* by various operating systems, the driver instance can be initialized in the
* following way:
*
*   - XUartPs_CfgInitialize(InstancePtr, CfgPtr, EffectiveAddr) - Uses a
*        configuration structure provided by the caller. If running in a system
*        with address translation, the parameter EffectiveAddr should be the
*         virtual address.
*
* <b>Baud Rate</b>
*
* The UART has an internal baud rate generator, which furnishes the baud rate
* clock for both the receiver and the transmitter. Ther input clock frequency
* can be either the master clock or the master clock divided by 8, configured
* through the mode register.
*
* Accompanied with the baud rate divider register, the baud rate is determined
* by:
* <pre>
*       baud_rate = input_clock / (bgen * (bdiv + 1)
* </pre>
* where bgen is the value of the baud rate generator, and bdiv is the value of
* baud rate divider.
*
* <b>Interrupts</b>
*
* The FIFOs are not flushed when the driver is initialized, but a function is
* provided to allow the user to reset the FIFOs if desired.
*
* The driver defaults to no interrupts at initialization such that interrupts
* must be enabled if desired. An interrupt is generated for one of the
* following conditions.
*
* - A change in the modem signals
* - Data in the receive FIFO for a configuable time without receiver activity
* - A parity error
* - A framing error
* - An overrun error
* - Transmit FIFO is full
* - Transmit FIFO is empty
* - Receive FIFO is full
* - Receive FIFO is empty
* - Data in the receive FIFO equal to the receive threshold
*
* The application can control which interrupts are enabled using the
* XUartPs_SetInterruptMask() function.
*
* In order to use interrupts, it is necessary for the user to connect the
* driver interrupt handler, XUartPs_InterruptHandler(), to the interrupt
* system of the application. A separate handler should be provided by the
* application to communicate with the interrupt system, and conduct
* application specific interrupt handling. An application registers its own
* handler through the XUartPs_SetHandler() function.
*
* <b>Data Transfer</b>
*
* The functions, XUartPs_Send() and XUartPs_Recv(), are provided in the
* driver to allow data to be sent and received. They can be used in either
* polled or interrupt mode.
*
* @note
*
* The default configuration for the UART after initialization is:
*
* - 9,600 bps or XPAR_DFT_BAUDRATE if defined
* - 8 data bits
* - 1 stop bit
* - no parity
* - FIFO's are enabled with a receive threshold of 8 bytes
* - The RX timeout is enabled with a timeout of 1 (4 char times)
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who    Date     Changes
* ----- ------ -------- ----------------------------------------------
* 1.00a drg/jz 01/12/10 First Release
* 1.00a sdm    09/27/11 Fixed compiler warnings and also a bug
*                       in XUartPs_SetFlowDelay where the value was not
*                       being written to the register.
* 1.01a sdm    12/20/11 Removed the InputClockHz parameter from the XUartPs
*                       instance structure and the driver is updated to use
*                       InputClockHz parameter from the XUartPs_Config config
*                       structure.
*                       Added a parameter to XUartPs_Config structure which
*                       specifies whether the user has selected Modem pins
*                       to be connected to MIO or FMIO.
*                       Added the tcl file to generate the xparameters.h
* 1.02a sg     05/16/12 Changed XUARTPS_RXWM_MASK to 0x3F for CR 652540 fix.
* 1.03a sg     07/16/12 Updated XUARTPS_FORMAT_7_BITS and XUARTPS_FORMAT_6_BITS
*                       with the correct values for CR 666724
*                       Added defines for XUARTPS_IXR_TOVR,  XUARTPS_IXR_TNFUL
*                       and XUARTPS_IXR_TTRIG.
*                       Modified the name of these defines
*                       XUARTPS_MEDEMSR_DCDX to XUARTPS_MODEMSR_DDCD
*                       XUARTPS_MEDEMSR_RIX to XUARTPS_MODEMSR_TERI
*                       XUARTPS_MEDEMSR_DSRX to XUARTPS_MODEMSR_DDSR
*                       XUARTPS_MEDEMSR_CTSX to XUARTPS_MODEMSR_DCTS
* 1.05a hk     08/22/13 Added API for uart reset and related
*                       constant definitions.
* 2.0   hk      03/07/14 Version number revised.
* 2.1   hk     04/16/14 Change XUARTPS_MAX_RATE to 921600. CR# 780625.
* 2.2   hk     06/23/14 SW reset of RX and TX should be done when changing
*                       baud rate. CR# 804281.
* 3.0   vm     12/09/14 Modified source code according to misrac guideline.
*                       Support for Zynq Ultrascale Mp added.
*
* </pre>
*
*****************************************************************************/

#ifndef XUARTPS_H               /* prevent circular inclusions */
#define XUARTPS_H               /* by using protection macros */

#ifdef __cplusplus
extern "C" {
#endif

/***************************** Include Files ********************************/

#include "xil_types.h"
#include "xil_assert.h"
#include "xstatus.h"
#include "xuartps_hw.h"

/************************** Constant Definitions ****************************/

/*
 * The following constants indicate the max and min baud rates and these
 * numbers are based only on the testing that has been done. The hardware
 * is capable of other baud rates.
 */
#define XUARTPS_MAX_RATE         921600U
#define XUARTPS_MIN_RATE         110U

#define XUARTPS_DFT_BAUDRATE  115200U   /* Default baud rate */

/** @name Configuration options
 * @{
 */
/**
 * These constants specify the options that may be set or retrieved
 * with the driver, each is a unique bit mask such that multiple options
 * may be specified.  These constants indicate the available options
 * in active state.
 *
 */

#define XUARTPS_OPTION_SET_BREAK        0x0080U /**< Starts break transmission */
#define XUARTPS_OPTION_STOP_BREAK       0x0040U /**< Stops break transmission */
#define XUARTPS_OPTION_RESET_TMOUT      0x0020U /**< Reset the receive timeout */
#define XUARTPS_OPTION_RESET_TX         0x0010U /**< Reset the transmitter */
#define XUARTPS_OPTION_RESET_RX         0x0008U /**< Reset the receiver */
#define XUARTPS_OPTION_ASSERT_RTS       0x0004U /**< Assert the RTS bit */
#define XUARTPS_OPTION_ASSERT_DTR       0x0002U /**< Assert the DTR bit */
#define XUARTPS_OPTION_SET_FCM          0x0001U /**< Turn on flow control mode */
/*@}*/


/** @name Channel Operational Mode
 *
 * The UART can operate in one of four modes: Normal, Local Loopback, Remote
 * Loopback, or automatic echo.
 *
 * @{
 */

#define XUARTPS_OPER_MODE_NORMAL                (u8)0x00U       /**< Normal Mode */
#define XUARTPS_OPER_MODE_AUTO_ECHO             (u8)0x01U       /**< Auto Echo Mode */
#define XUARTPS_OPER_MODE_LOCAL_LOOP    (u8)0x02U       /**< Local Loopback Mode */
#define XUARTPS_OPER_MODE_REMOTE_LOOP   (u8)0x03U       /**< Remote Loopback Mode */

/* @} */

/** @name Data format values
 *
 * These constants specify the data format that the driver supports.
 * The data format includes the number of data bits, the number of stop
 * bits and parity.
 *
 * @{
 */
#define XUARTPS_FORMAT_8_BITS           0U /**< 8 data bits */
#define XUARTPS_FORMAT_7_BITS           2U /**< 7 data bits */
#define XUARTPS_FORMAT_6_BITS           3U /**< 6 data bits */

#define XUARTPS_FORMAT_NO_PARITY        4U /**< No parity */
#define XUARTPS_FORMAT_MARK_PARITY      3U /**< Mark parity */
#define XUARTPS_FORMAT_SPACE_PARITY     2U /**< parity */
#define XUARTPS_FORMAT_ODD_PARITY       1U /**< Odd parity */
#define XUARTPS_FORMAT_EVEN_PARITY      0U /**< Even parity */

#define XUARTPS_FORMAT_2_STOP_BIT       2U /**< 2 stop bits */
#define XUARTPS_FORMAT_1_5_STOP_BIT     1U /**< 1.5 stop bits */
#define XUARTPS_FORMAT_1_STOP_BIT       0U /**< 1 stop bit */
/*@}*/

/** @name Callback events
 *
 * These constants specify the handler events that an application can handle
 * using its specific handler function. Note that these constants are not bit
 * mask, so only one event can be passed to an application at a time.
 *
 * @{
 */
#define XUARTPS_EVENT_RECV_DATA         1U /**< Data receiving done */
#define XUARTPS_EVENT_RECV_TOUT         2U /**< A receive timeout occurred */
#define XUARTPS_EVENT_SENT_DATA         3U /**< Data transmission done */
#define XUARTPS_EVENT_RECV_ERROR        4U /**< A receive error detected */
#define XUARTPS_EVENT_MODEM                     5U /**< Modem status changed */
/*@}*/


/**************************** Type Definitions ******************************/

/**
 * This typedef contains configuration information for the device.
 */
typedef struct {
        u16 DeviceId;    /**< Unique ID  of device */
        u32 BaseAddress; /**< Base address of device (IPIF) */
        u32 InputClockHz;/**< Input clock frequency */
        s32 ModemPinsConnected; /** Specifies whether modem pins are connected
                                 *  to MIO or FMIO */
} XUartPs_Config;

/*
 * Keep track of state information about a data buffer in the interrupt mode.
 */
typedef struct {
        u8 *NextBytePtr;
        u32 RequestedBytes;
        u32 RemainingBytes;
} XUartPsBuffer;

/**
 * Keep track of data format setting of a device.
 */
typedef struct {
        u32 BaudRate;   /**< In bps, ie 1200 */
        u32 DataBits;   /**< Number of data bits */
        u32 Parity;             /**< Parity */
        u8 StopBits;    /**< Number of stop bits */
} XUartPsFormat;

/******************************************************************************/
/**
 * This data type defines a handler that an application defines to communicate
 * with interrupt system to retrieve state information about an application.
 *
 * @param       CallBackRef is a callback reference passed in by the upper layer
 *              when setting the handler, and is passed back to the upper layer
 *              when the handler is called. It is used to find the device driver
 *              instance.
 * @param       Event contains one of the event constants indicating events that
 *              have occurred.
 * @param       EventData contains the number of bytes sent or received at the
 *              time of the call for send and receive events and contains the
 *              modem status for modem events.
 *
 ******************************************************************************/
typedef void (*XUartPs_Handler) (void *CallBackRef, u32 Event,
                                  u32 EventData);

/**
 * The XUartPs driver instance data structure. A pointer to an instance data
 * structure is passed around by functions to refer to a specific driver
 * instance.
 */
typedef struct {
        XUartPs_Config Config;  /* Configuration data structure */
        u32 InputClockHz;       /* Input clock frequency */
        u32 IsReady;            /* Device is initialized and ready */
        u32 BaudRate;           /* Current baud rate */

        XUartPsBuffer SendBuffer;
        XUartPsBuffer ReceiveBuffer;

        XUartPs_Handler Handler;
        void *CallBackRef;      /* Callback reference for event handler */
} XUartPs;


/***************** Macros (Inline Functions) Definitions ********************/

/****************************************************************************/
/**
* Get the UART Channel Status Register.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
*
* @return       The value read from the register.
*
* @note         C-Style signature:
*               u16 XUartPs_GetChannelStatus(XUartPs *InstancePtr)
*
******************************************************************************/
#define XUartPs_GetChannelStatus(InstancePtr)   \
        Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_SR_OFFSET)

/****************************************************************************/
/**
* Get the UART Mode Control Register.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
*
* @return       The value read from the register.
*
* @note         C-Style signature:
*               u32 XUartPs_GetControl(XUartPs *InstancePtr)
*
******************************************************************************/
#define XUartPs_GetModeControl(InstancePtr)  \
        Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_CR_OFFSET)

/****************************************************************************/
/**
* Set the UART Mode Control Register.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
* @param        RegisterValue is the value to be written to the register.
*
* @return       None.
*
* @note         C-Style signature:
*       void XUartPs_SetModeControl(XUartPs *InstancePtr, u16 RegisterValue)
*
******************************************************************************/
#define XUartPs_SetModeControl(InstancePtr, RegisterValue) \
   Xil_Out32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_CR_OFFSET, \
                        (u32)(RegisterValue))

/****************************************************************************/
/**
* Enable the transmitter and receiver of the UART.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
*
* @return       None.
*
* @note         C-Style signature:
*               void XUartPs_EnableUart(XUartPs *InstancePtr)
*
******************************************************************************/
#define XUartPs_EnableUart(InstancePtr) \
   Xil_Out32(((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET), \
          ((Xil_In32((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET) & \
          (u32)(~XUARTPS_CR_EN_DIS_MASK)) | ((u32)XUARTPS_CR_RX_EN | (u32)XUARTPS_CR_TX_EN)))

/****************************************************************************/
/**
* Disable the transmitter and receiver of the UART.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
*
* @return       None.
*
* @note         C-Style signature:
*               void XUartPs_DisableUart(XUartPs *InstancePtr)
*
******************************************************************************/
#define XUartPs_DisableUart(InstancePtr) \
   Xil_Out32(((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET), \
          (((Xil_In32((InstancePtr)->Config.BaseAddress + (u32)XUARTPS_CR_OFFSET)) & \
          (u32)(~XUARTPS_CR_EN_DIS_MASK)) | ((u32)XUARTPS_CR_RX_DIS | (u32)XUARTPS_CR_TX_DIS)))

/****************************************************************************/
/**
* Determine if the transmitter FIFO is empty.
*
* @param        InstancePtr is a pointer to the XUartPs instance.
*
* @return
*               - TRUE if a byte can be sent
*               - FALSE if the Transmitter Fifo is not empty
*
* @note         C-Style signature:
*               u32 XUartPs_IsTransmitEmpty(XUartPs InstancePtr)
*
******************************************************************************/
#define XUartPs_IsTransmitEmpty(InstancePtr)                            \
        ((Xil_In32(((InstancePtr)->Config.BaseAddress) + (u32)XUARTPS_SR_OFFSET) & \
         (u32)XUARTPS_SR_TXEMPTY) == (u32)XUARTPS_SR_TXEMPTY)


/************************** Function Prototypes *****************************/

/*
 * Static lookup function implemented in xuartps_sinit.c
 */
XUartPs_Config *XUartPs_LookupConfig(u16 DeviceId);

/*
 * Interface functions implemented in xuartps.c
 */
s32 XUartPs_CfgInitialize(XUartPs *InstancePtr,
                                  XUartPs_Config * Config, u32 EffectiveAddr);

u32 XUartPs_Send(XUartPs *InstancePtr,u8 *BufferPtr,
                           u32 NumBytes);

u32 XUartPs_Recv(XUartPs *InstancePtr,u8 *BufferPtr,
                           u32 NumBytes);

s32 XUartPs_SetBaudRate(XUartPs *InstancePtr, u32 BaudRate);

/*
 * Options functions in xuartps_options.c
 */
void XUartPs_SetOptions(XUartPs *InstancePtr, u16 Options);

u16 XUartPs_GetOptions(XUartPs *InstancePtr);

void XUartPs_SetFifoThreshold(XUartPs *InstancePtr, u8 TriggerLevel);

u8 XUartPs_GetFifoThreshold(XUartPs *InstancePtr);

u16 XUartPs_GetModemStatus(XUartPs *InstancePtr);

u32 XUartPs_IsSending(XUartPs *InstancePtr);

u8 XUartPs_GetOperMode(XUartPs *InstancePtr);

void XUartPs_SetOperMode(XUartPs *InstancePtr, u8 OperationMode);

u8 XUartPs_GetFlowDelay(XUartPs *InstancePtr);

void XUartPs_SetFlowDelay(XUartPs *InstancePtr, u8 FlowDelayValue);

u8 XUartPs_GetRecvTimeout(XUartPs *InstancePtr);

void XUartPs_SetRecvTimeout(XUartPs *InstancePtr, u8 RecvTimeout);

s32 XUartPs_SetDataFormat(XUartPs *InstancePtr, XUartPsFormat * FormatPtr);

void XUartPs_GetDataFormat(XUartPs *InstancePtr, XUartPsFormat * FormatPtr);

/*
 * interrupt functions in xuartps_intr.c
 */
u32 XUartPs_GetInterruptMask(XUartPs *InstancePtr);

void XUartPs_SetInterruptMask(XUartPs *InstancePtr, u32 Mask);

void XUartPs_InterruptHandler(XUartPs *InstancePtr);

void XUartPs_SetHandler(XUartPs *InstancePtr, XUartPs_Handler FuncPtr,
                         void *CallBackRef);

/*
 * self-test functions in xuartps_selftest.c
 */
s32 XUartPs_SelfTest(XUartPs *InstancePtr);

#ifdef __cplusplus
}
#endif

#endif /* end of protection macro */