/***************************************************************************** * MODIFICATION HISTORY: * * Ver Who Date Changes * ----- ---- -------- --------------------------------------------------- * 3.02a sdm 05/30/11 Added Xuint64 typedef and XUINT64_MSW/XUINT64_LSW macros * 3.02a sdm 06/27/11 Added INST_SYNC and DATA_SYNC macros for all the CPUs * 3.02a sdm 07/07/11 Updated ppc440 boot.S to set guarded bit for all but * cacheable regions * Update ppc440/xil_cache.c to use CACHEABLE_REGION_MASK * generated by the cpu driver, for enabling caches * 3.02a sdm 07/08/11 Updated microblaze cache flush APIs based on write-back/ * write-thru caches * 3.03a sdm 08/20/11 Updated the tag/data RAM latency values for L2CC * Updated the MMU table to mark OCM in high address space * as inner cacheable and reserved space as Invalid * 3.03a sdm 08/20/11 Changes to support FreeRTOS * Updated the MMU table to mark upper half of the DDR as * non-cacheable * Setup supervisor and abort mode stacks * Do not initialize/enable L2CC in case of AMP * Initialize UART1 for 9600bps in case of AMP * 3.03a sdm 08/27/11 Setup abort and supervisor mode stacks and don't init SMC * in case of AMP * 3.03a sdm 09/14/11 Added code for performance monitor and L2CC event * counters * 3.03a sdm 11/08/11 Updated microblaze xil_cache.h file to include * xparameters.h file for CR630532 - Xil_DCacheFlush()/ * Xil_DCacheFlushRange() functions in standalone BSP v3_02a * for MicroBlaze will invalidate data in the cache instead * of flushing it for writeback caches * 3.04a sdm 11/21/11 Updated to initialize stdio device for 115200bps, for PS7 * 3.04a sdm 01/02/12 Updated to clear cp15 regs with unknown reset values * Remove redundant dsb/dmb instructions in cache maintenance * APIs * Remove redundant dsb in mcr instruction * 3.04a sdm 01/13/12 Updated MMU table to mark DDR memory as Shareable * 3.05a sdm 02/02/12 Removed some of the defines as they are being generated through * driver tcl in xparameters.h. Update the gcc/translationtable.s * for the QSPI complete address range - DT644567 * Removed profile directory for armcc compiler and changed * profiling setting to false in standalone_v2_1_0.tcl file * Deleting boot.S file after preprocessing for armcc compiler * 3.05a asa 03/11/12 Updated the function Xil_EnableMMU in file xil_mmu.c to * invalidate the caches before enabling back the MMU and * D cache. * 3.05a asa 04/15/12 Updated the function Xil_SetTlbAttributes in file * xil_mmu.c. Now we invalidate UTLB, Branch predictor * array, flush the D-cache before changing the attributes * in translation table. The user need not call Xil_DisableMMU * before calling Xil_SetTlbAttributes. * 3.06a asa/ 06/17/12 Removed the UART initialization for Zynq. For PEEP, the UART * sgd initialization is present. Changes for this were done in * uart.c and xil-crt0.s. * Made changes in xil_io.c to use volatile pointers. * Made changes in xil_mmu.c to correct the function * Xil_SetTlbAttributes. * Changes are made xil-crt0.s to initialize the static * C++ constructors. * Changes are made in boot.s, to fix the TTBR settings, * correct the L2 Cache Auxiliary register settings, L2 cache * latency settings. * 3.07a asa/ 07/16/12 Made changes in cortexa9/xtime_l.c, xtime_l.h, sleep.c * sgd usleep.c to use global timer intstead of CP15. * Made changes in cortexa9/gcc/translation_table.s to map * the peripheral devices as shareable device memory. * Made changes in cortexa9/gcc/xil-crt0.s to initialize * the global timer. * Made changes in cortexa9/armcc/boot.S to initialize * the global timer. * Made changes in cortexa9/armcc/translation_table.s to * map the peripheral devices as shareable device memory. * Made changes in cortexa9/gcc/boot.S to optimize the * L2 cache settings. Changes the section properties for * ".mmu_tbl" and ".boot" sections in cortexa9/gcc/boot.S * and cortexa9/gcc/translation_table.S. * Made changes in cortexa9/xil_cache.c to change the * cache invalidation order. * 3.07a asa 08/17/12 Made changes across files for Cortexa9 to remove * compilation/linking issues for C++ compiler. * Made changes in mb_interface.h to remove compilation/ * linking issues for C++ compiler. * Added macros for swapb and swaph microblaze instructions * mb_interface.h * Remove barrier usage (SYNCHRONIZE_IO) from xil_io.c * for CortexA9. * 3.07a asa 08/30/12 Updated for CR 675636 to provide the L2 Base Address * 3.07a asa 08/31/12 Added xil_printf.h include * 3.07a sgd 09/18/12 Corrected the L2 cache enable settings * Corrected L2 cache sequence disable sequence * 3.07a sgd 10/19/12 SMC NOR and SRAM initialization with compiler option * 3.09a asa 01/25/13 Updated to push and pop neon registers into stack for * irq/fiq handling. * Relocated COUNTS_PER_SECOND from sleep.c to xtime_l.h. This * fixes the CR #692094. * 3.09a sgd 02/14/13 Fix for CRs 697094 (SI#687034) and 675552. * 3.10a srt 04/18/13 Implemented ARM Erratas. * Cortex A9 Errata - 742230, 743622, 775420, 794073 * L2Cache PL310 Errata - 588369, 727915, 759370 * Please refer to file 'xil_errata.h' for errata * description. * 3.10a asa 05/04/13 Added support for L2 cache in MicroBlaze BSP. The older * cache APIs were corresponding to only Layer 1 cache * memories. New APIs were now added and the existing cache * related APIs were changed to provide a uniform interface * to flush/invalidate/enable/disable the complete cache * system which includes both L1 and L2 caches. The changes * for these were done in: * src/microblaze/xil_cache.c and src/microblaze/xil_cache.h * files. * Four new files were added for supporting L2 cache. They are: * microblaze_flush_cache_ext.S-> Flushes L2 cache * microblaze_flush_cache_ext_range.S -> Flushes a range of * memory in L2 cache. * microblaze_invalidate_cache_ext.S-> Invalidates L2 cache * microblaze_invalidate_cache_ext_range -> Invalidates a * range of memory in L2 cache. * These changes are done to implement PR #697214. * 3.10a asa 05/13/13 Modified cache disable APIs at src/cortexa9/xil_cache.c to * fix the CR #706464. L2 cache disabling happens independent * of L1 data cache disable operation. Changes are done in the * same file in cache handling APIs to do a L2 cache sync * (poll reg7_?cache_?sync). This fixes CR #700542. * 3.10a asa 05/20/13 Added API/Macros for enabling and disabling nested * interrupts for ARM. These are done to fix the CR#699680. * 3.10a srt 05/20/13 Made changes in cache maintenance APIs to do a proper cach * sync operation. This fixes the CR# 716781. * 3.11a asa 09/07/13 Updated armcc specific BSP files to have proper support * for armcc toolchain. * Modified asm_vectors.S (gcc) and asm_vectors.s (armcc) to * fix issues related to NEON context saving. The assembly * routines for IRQ and FIQ handling are modified. * Deprecated the older BSP (3.10a). * 3.11a asa 09/22/13 Fix for CR#732704. Cache APIs are modified to avoid * various potential issues. Made changes in the function * Xil_SetAttributes in file xil_mmu.c. * 3.11a asa 09/23/13 Added files xil_misc_psreset_api.c and xil_misc_psreset_api.h * in src\cortexa9 and src\microblaze folders. * 3.11a asa 09/28/13 Modified the cache APIs (src\cortexa9) to fix handling of * L2 cache sync operation and to fix issues around complete * L2 cache flush/invalidation by ways. * 3.12a asa 10/22/13 Modified the files xpseudo_asm_rvct.c and xpseudo_asm_rvct.h * to fix linking issues with armcc/DS-5. Modified the armcc * makefile to fix issues. * 3.12a asa 11/15/13 Fix for CR#754800. It fixes issues around profiling for MB. * 4.0 hk 12/13/13 Added check for STDOUT_BASEADDRESS where outbyte is used. * 4.0 pkp 22/01/14 Modified return addresses for interrupt handlers (DataAbortHandler * and SWIHandler) in asm_vector.S (src\cortexa9\gcc\ and * src\cortexa9\armcc\) to fix CR#767251 * 4.0 pkp 24/01/14 Modified cache APIs (Xil_DCacheInvalidateRange and * Xil_L1DCacheInvalidate) in xil_cache.c (src\cortexa9) to fix the bugs. * Few cache lines were missed to invalidate when unaligned address * invalidation was accommodated in Xil_DCacheInvalidateRange. * In Xil_L1DCacheInvalidate, while invalidating all L1D cache * stack memory (which contains return address) was invalidated. So * stack memory is flushed first and then L1D cache is invalidated. * This is done to fix CR #763829 * 4.0 adk 22/02/2014 Fixed the CR:775379 removed unnecessay _t(unit32_t etc) from * mblaze_nt_types.h file and replace uint32_t with u32 in the * profile_hist.c to fix the above CR. * 4.1 bss 04/14/14 Updated driver tcl to remove _interrupt_handler.o from libgloss.a * instead of libxil.a and added prototypes for * microblaze_invalidate_cache_ext and microblaze_flush_cache_ext in * mb_interface.h * 4.1 hk 04/18/14 Add sleep function. * 4.1 asa 04/21/14 Fix for CR#764881. Added support for msrset and msrclr. Renamed * some of the *.s files inMB BSP source to *.S. * 4.1 asa 04/28/14 Fix for CR#772280. Made changes in file cortexa9/gcc/read.c. * 4.1 bss 04/29/14 Modified driver tcl to use libxil.a if libgloss.a does not exist * CR#794205 * 4.1 asa 05/09/14 Fix for CR#798230. Made changes in cortexa9/xil_cache.c and * common/xil_testcache.c * Fix for CR#764881. * 4.1 srt 06/27/14 Remove '#undef DEBUG' from src/common/xdebug.h, which allows to * output the DEBUG logs when -DDEBUG flag is enabled in BSP. * 4.2 pkp 06/27/14 Added support for IAR compiler in src/cortexa9/iccarm. * Also added explanatory notes in cortexa9/xil_cache.c for CR#785243. * 4.2 pkp 06/19/14 Asynchronous abort has been enabled into cortexa9/gcc/boot.s and * cortexa9/armcc/boot.s. Added default exception handlers for data * abort and prefetch abort using handlers called * DataAbortHandler and PrefetchAbortHandler respectively in * cortexa9/xil_exception.c to fix CR#802862. * 4.2 pkp 06/30/14 MakeFile for cortexa9/armcc has been changed to fixes the * issue of improper linking of translation_table.s * 4.2 pkp 07/04/14 added weak attribute for the function in BSP which are also present * in tool chain to avoid conflicts into some special cases * 4.2 pkp 07/21/14 Corrected reset value of event counter in function * Xpm_ResetEventCounters in src/cortexa9/xpm_counter.c to fix CR#796275 * 4.2 pkp 07/21/14 Included xil_types.h file in xil_mmu.h which had contained a function * containing type def u32 defined in xil_types.g to resolve issue of * CR#805869 * 4.2 pkp 08/04/14 Removed unimplemented nanosleep routine from cortexa9/usleep.c as * it is not possible to generate timer in nanosecond due to limited * cpu frequency * 4.2 pkp 08/04/14 Removed PEEP board related code which contained initialization of * uart, smc nor and sram from cortexa9/gcc/xil-crt0.s and armcc/boot.s * and iccarm/boot.s. Also uart.c and smc.c have been removed. Also * removed function definition of XSmc_NorInit and XSmc_NorInit from * cortexa9/smc.h * 4.2 bss 08/11/14 Added microblaze_flush_cache_ext_range and microblaze_invalidate_ * cache_ext_range declarations in mb_interface.h CR#783821. * Modified profile_mcount_mb.S to fix CR#808412. * 4.2 pkp 08/21/14 modified makefile of iccarm for proper linking of objectfiles in * cortexa9/iccarm to fix CR#816701 * 4.2 pkp 09/02/14 modified translation table entries in cortexa9/gcc/translation_table.s, * armcc/translation_table.s and iccarm/translation_table.s * to properly defined reserved entries according to address map for * fixing CR#820146 * 4.2 pkp 09/11/14 modified translation table entries in cortexa9/iccarm/translation_table.s * and cortexa9/armcc/translation_table.s to resolve compilation * error for solving CR#822897 * 5.0 kvn 12/9/14 Support for Zync Ultrascale Mp.Also modified code for * MISRA-C:2012 compliance. * 5.0 pkp 12/15/14 Added APIs to get information about the platforms running the code by * adding src/common/xplatform_info.*s * 5.0 pkp 16/12/14 Modified boot code to enable scu after MMU is enabled and * removed incorrect initialization of TLB lockdown register to fix * CR#830580 in cortexa9/gcc/boot.S & cpu_init.S, armcc/boot.S * and iccarm/boot.s * 5.0 pkp 25/02/15 Modified floating point flag to vfpv3 from vfpv3_d16 in BSP MakeFile * for iccarm and armcc compiler of cortexA9 * 5.1 pkp 05/13/15 Changed the initialization order in cortexa9/gcc/boot.S, iccarm/boot.s * and armcc/boot.s so to first invalidate caches and TLB, enable MMU and * caches, then enable SMP bit in ACTLR. L2Cache invalidation and enabling * of L2Cache is done later. * 5.1 pkp 12/05/15 Modified cortexa9/xil_cache.c to modify Xil_DCacheInvalidateRange and * Xil_DCacheFlushRange to remove unnecessary dsb which is unnecessarily * taking long time to fix CR#853097. L2CacheSync is added into * Xil_L2CacheInvalidateRange API. Xil_L1DCacheInvalidate and * Xil_L2CacheInvalidate APIs are modified to flush the complete stack * instead of just System Stack * 5.1 pkp 14/05/15 Modified cortexa9/gcc/Makefile to keep a correct check of a compiler * to update ECC_FLAGS and also take the compiler and archiver as specified * in settings instead of hardcoding it. * 5.2 pkp 06/08/15 Modified cortexa9/gcc/translation_table.S to put a check for * XPAR_PS7_DDR_0_S_AXI_BASEADDR to confirm if DDR is present or not and * accordingly generate the translation table * 5.2 pkp 23/07/15 Modified cortexa9/gcc/Makefile to keep a correct check of a compiler * to update ECC_FLAGS to fix a bug introduced during new version creation * of BSP. * 5.3 pkp 10/07/15 Modified cortexa9/xil_cache.c file to change cache API so that L2 Cache * functionalities are avoided for the OpenAMP slave application(when * USE_AMP flag is defined for BSP) as master CPU would be utilizing L2 * cache for its operation. Also file operations such as read, write, * close, open are also avoided for OpenAMP support(when USE_AMP flag is * defined for BSP) because XilOpenAMP library contains own file operation. * The xil-crt0.S file is modified for not initializing global timer for * OpenAMP application as it might be already in use by master CPU * 5.3 pkp 10/09/15 Modified cortexa9/iccarm/xpseudo_asm_iccarm.h file to change function * definition for dsb, isb and dmb to fix the compilation error when used * kvn 16/10/15 Encapsulated assembly code into macros for R5 xil_cache file. * 5.4 pkp 09/11/15 Modified cortexr5/gcc/boot.S to disable ACTLR.DBWR bit to avoid potential * R5 deadlock for errata 780125 * 5.4 pkp 09/11/15 Modified cortexa53/32bit/gcc/boot.S to enable I-Cache and D-Cache for a53 * 32 bit BSP in the initialization * 5.4 pkp 09/11/15 Modified cortexa9/xil_misc_psreset_api.c file to change the description * for XOcm_Remap function * 5.4 pkp 16/11/15 Modified microblaze/xil_misc_psreset_api.c file to change the description * for XOcm_Remap function * kvn 21/11/15 Added volatile keyword for ADDR varibles in Xil_Out API * kvn 21/11/15 Changed ADDR variable type from u32 to UINTPTR. This is * required for MISRA-C:2012 Compliance. * 5.4 pkp 23/11/15 Added attribute definitions for Xil_SetTlbAttributes API of Cortex-A9 * in cortexa9/xil_mmu.h * 5.4 pkp 23/11/15 Added default undefined exception handler for Cortex-A9 * 5.4 pkp 11/12/15 Modified common/xplatform_info.h to add #defines for silicon for * checking the current executing platform * 5.4 pkp 18/12/15 Modified cortexa53/32bit/gcc/xil-crt0.S and 64bit/gcc/xil-crt0.S * to initialize global constructor for C++ applications * 5.4 pkp 18/12/15 Modified cortexr5/gcc/xil-crt0.S to initialize global constructor for * C++ applications * 5.4 pkp 18/12/15 Modified cortexa53/32bit/gcc/translation_table.S and 64bit/gcc/ * translation_table.S to update the translation table according to proper * address map * 5.4 pkp 18/12/15 Modified cortexar5/mpu.c to initialize the MPU according to proper * address map * 5.4 pkp 05/01/16 Modified cortexa53/64bit/boot.S to set the reset vector register RVBAR * equivalent to vector table base address * 5.4 pkp 08/01/16 Modified cortexa9/gcc/Makefile to update the extra compiler flag * as per the toolchain update * 5.4 pkp 12/01/16 Changed common/xplatform_info.* to add platform information support * for Cortex-A53 32bit mode * 5.4 pkp 28/01/16 Modified cortexa53/32bit/sleep.c and usleep.c & cortexa53/64bit/sleep.c * and usleep.c to correct routines to avoid hardcoding the timer frequency, * instead take it from xparameters.h to properly configure the timestamp * clock frequency * 5.4 asa 29/01/16 Modified microblaze/mb_interface.h to add macros that support the * new instructions for MB address extension feature * 5.4 kvn 30/01/16 Modified xparameters_ps.h file to add interrupt ID number for * system monitor. * 5.4 pkp 04/02/16 Modified cortexr5/gcc/boot.S to enable fault log for lock-step mode * 5.4 pkp 19/02/16 Modified cortexr5/xtime_l.c to add an API XTime_StartTimer and updated * cortexr5/xil-crt0.S to configure the TTC3 timer when present. Modified * cortexr5/sleep.c, cortexr5/usleep.c to use TTC3 when present otherwise * use set of assembly instructions to provide required delay to fix * CR#913249. * 5.4 asa 25/02/16 Made changes in xil-crt0.S for R5, A53 64 and 32 bit BSPs, to replace * _exit with exit. We should not be directly calling _exit and should * always use the library exit. This fixes the CR#937036. * 5.4 pkp 25/02/16 Made change to cortexr5/gcc/boot.S to initialize the floating point * registers, banked registers for various modes and enabled * the cache ECC check before enabling the fault log for lock step mode * Also modified the cortexr5/gcc/Makefile to support floating point * registers initialization in boot code. * 5.4 pkp 03/01/16 Updated the exit function in cortexr5/gcc/_exit.c to enable the debug * logic in case of lock-step mode when fault log is enabled to fix * CR#938281 * 5.4 pkp 03/02/16 Modified cortexa9/iccarm/xpseudo_asm_iccarm.h file to include * header file instrinsics.h which contains assembly instructions * definitions which can be used by C * 5.4 asa 03/02/16 Added print.c in MB BSP. Made other cosmetic changes to have uniform * proto for all print.c across the BSPs. This patch fixes CR#938738. * 5.4 pkp 03/09/16 Modified cortexr5/sleep.c and usleep.c to avoid disabling the * interrupts when sleep/usleep is being executed using assembly * instructions to fix CR#913249. * 5.4 pkp 03/11/16 Modified cortexr5/xtime_l.c to avoid enabling overflow interrupt, * instead modified cortexr5/sleep.c and usleep.c to poll the counter * value and compare it with previous value to detect the overflow * to fix CR#940209. * 5.4 pkp 03/24/16 Modified cortexr5/boot.S to reset the dbg_lpd_reset before enabling * the fault log to avoid intervention for lock-step mode and cortexr5/ * _exit.c to enable the dbg_lpd_reset once the fault log is disabled * to fix CR#947335 * 5.5 pkp 04/11/16 Modified cortexr5/boot.S to enable comparators for non-JTAG bootmode * in lock-step to avoid resetting the debug logic which restricts the * access for debugger and removed enabling back of debug modules in * cortexr5/_exit.c * 5.5 pkp 04/13/16 Modified cortexa9/gcc/read.c to return correct number of bytes when * read buffer is filled and removed the redundant NULL checking for * buffer to simplify the code * 5.5 pkp 04/13/16 Modified cortexa53/64bit/gcc/read.c and cortexa53/32bit/gcc/read.c * to return correct number of bytes when read buffer is filled and * removed the redundant NULL checking for buffer to simplify the code * 5.5 pkp 04/13/16 Modified cortexr5/gcc/read.c to return correct number of bytes when * read buffer is filled and removed the redundant NULL checking for * buffer to simplify the code * 5.5 pkp 04/13/16 Modified cortexa53/64bit/xpseudo_asm_gcc.h to add volatile to asm * instruction macros to disable certain optimizations which may move * code out of loops if optimizers believe that the code will always * return the same result or discard asm statements if optimizers * determine there is no need for the output variables * 5.5 pkp 04/13/16 Modified cortexa53/64bit/xtime_l.c to add XTime_StartTimer which * starts the timer if it is disabled and modified XTime_GetTime to * enable the timer if it is not enabled. Also modified cortexa53/64bit/ * sleep.c and cortexa53/64bit/usleep.c to enable the timer if it is * disabled and read the counter value directly from register instead * of using XTime_GetTime for optimization * 5.5 pkp 04/13/16 Modified cortexa53/32bit/xtime_l.c to add XTime_StartTimer which * starts the timer if it is disabled and modified XTime_GetTime to * enable the timer if it is not enabled. Also modified cortexa53/32bit/ * sleep.c and cortexa53/32bit/usleep.c to enable the timer if it is * disabled and read the counter value directly from register instead * of using XTime_GetTime for optimization * 5.5 pkp 04/13/16 Modified cortexa53/32bit/xil_cache.c and cortexa53/64bit/xil_cache.c * to update the Xil_DCacheInvalidate, Xil_DCacheInvalidateLine and * Xil_DCacheInvalidateRange functions description for proper * explaination to fix CR#949801 * 5.5 asa 04/20/16 Added missing macros for hibernate and suspend in Microblaze BSP * file mb_interface.h. This fixes the CR#949503. * 5.5 asa 04/29/16 Fix for CR#951080. Updated cache APIs for HW designs where cache * memory is not included for MicroBlaze. * 5.5 pkp 05/06/16 Modified the cortexa9/xil_exception.h to update the macros * Xil_EnableNestedInterrupts and Xil_DisableNestedInterrupts for fixing * the issue of lr being corrupted to resolve CR#950468 * 5.5 pkp 05/06/16 Modified the cortexr5/xil_exception.h to update the macros * Xil_EnableNestedInterrupts and Xil_DisableNestedInterrupts for fixing * the issue of lr being corrupted to resolve CR#950468 * 6.0 kvn 05/31/16 Make Xil_AsserWait a global variable * 6.0 pkp 06/27/16 Updated cortexr5/mpu.c to move the code related to Init_MPU to .boot * section since it is part of boot process to fix CR#949555 * hk 07/12/16 Correct masks for IOU SLCR GEM registers * 6.0 pkp 07/25/16 Program the counter frequency in boot code for CortexA53 * 6.0 asa 08/03/16 Updated sleep_common function in microblaze_sleep.c to improve the * the accuracy of MB sleep functionality. This fixes the CR#954191. * 6.0 mus 08/03/16 Restructured the BSP to avoid code duplication across all BSPs. * Source code directories specific to ARM processor's are moved to src/arm * directory(i.e. src/cortexa53,src/cortexa9 and src/cortexr5 moved to src/arm/cortexa53, * src/arm/cortexa9 and src/arm/cortexr5 respectively).Files xil_printf.c,xil_printf.h, * print.c,xil_io.c and xil_io.h are consolidated across all BSPs into common file each and * consolidated files are kept at src/common directory.Files putnum.c,vectors.c,vectors.h, * xil_exception.c and xil_exception.h are consolidated across all ARM BSPs * into common file each and consolidated files are kept at src/arm/common directory. * GCC source files related to file operations are consolidated and kept * at src/arm/common/gcc directory. * All io interfacing functions (i.e. All variants of xil_out, xil_in ) * are made as static inline and implementation is kept in consolidated common/xil_io.h, * xil_io.h must be included as a header file to access io interfacing functions. * Added undefined exception handler for A53 32 bit and R5 processor * 6.0 mus 08/11/16 Updated xtime_l.c in R5 BSP to remove implementation of XTime_SetTime API, since * TTC counter value register is read only. * 6.0 asa 08/15/16 Modified the signatures for functions sleep and usleep. This fixes * the CR#956899. * 6.0 mus 08/18/16 Defined ARMA53_32 flag in cortexa53/32bit/xparameters_ps.h and ARMR5 flag * in cortexr5/xparameters_ps.h * 6.0 mus 08/18/16 Added support for the the Zynq 7000s devices * 6.0 mus 08/18/16 Removed unused variables from xil_printf.c and xplatform_info.c * 6.0 mus 08/19/16 Modified xil_io.h to remove __LITTLE_ENDIAN__ flag check for all ARM processors * 6.1 mus 11/03/16 Added APIs handle_stdin_parameter and handle_stdout_parameter in standalone tcl. * ::hsi::utils::handle_stdin and ::hsi::utils::handle_stdout are taken as a base for * these APIs and modifications are done on top of it to handle stdout/stdin * parameters for design which doesnt have UART.It fixes CR#953681 *****************************************************************************************/