IPNAME: axi_interconnect, INSTANCE:axi4_0 - tcl is overriding PARAMETER C_BASEFAMILY value to spartan6 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 69 IPNAME: axi_interconnect, INSTANCE:axi4lite_0 - tcl is overriding PARAMETER C_BASEFAMILY value to spartan6 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 69 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ENDIANNESS value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 183 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ICACHE_USE_FSL value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 322 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_DCACHE_USE_FSL value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 352 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_SYS_RST_PRESENT value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 228 Cannot determine the input clock associated with port : microblaze_0_i_bram_ctrl:BRAM_Clk_A. Clock DRCs will not be performed on this core and cores connected to it. Cannot determine the input clock associated with port : microblaze_0_d_bram_ctrl:BRAM_Clk_A. Clock DRCs will not be performed on this core and cores connected to it. IPNAME: axi_ethernetlite, INSTANCE: Ethernet_Lite - This design requires design constraints to guarantee performance. Please refer to the data sheet for details. The AXI clock frequency must be greater than or equal to 50 MHz for 100 Mbs Ethernet operation and greater than or equal to 5.0 MHz for 10 Mbs Ethernet operation. - C:\E\Dev\FreeRTOS\WorkingCopy\Demo\MicroBlaze_Spartan-6_EthernetLite\PlatformStudioProject\system.mhs line 324 IPNAME: lmb_v10, INSTANCE:microblaze_0_ilmb - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v2_00_a\data\lmb_v10_v2_1_0.mpd line 70 IPNAME: lmb_v10, INSTANCE:microblaze_0_dlmb - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v2_00_a\data\lmb_v10_v2_1_0.mpd line 70 IPNAME: bram_block, INSTANCE:microblaze_0_bram_block - tool is overriding PARAMETER C_MEMSIZE value to 0x2000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 67 PORT: bscan_tdo1, CONNECTOR: bscan_tdo1 - No driver found. Port will be driven to GND - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 230 PORT: bscan_tdi, CONNECTOR: bscan_tdi - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 223 PORT: bscan_reset, CONNECTOR: bscan_reset - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 224 PORT: bscan_shift, CONNECTOR: bscan_shift - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 225 PORT: bscan_update, CONNECTOR: bscan_update - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 226 PORT: bscan_capture, CONNECTOR: bscan_capture - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 227 PORT: bscan_sel1, CONNECTOR: bscan_sel1 - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 228 PORT: bscan_drck1, CONNECTOR: bscan_drck1 - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 229 IPNAME: axi_interconnect, INSTANCE:axi4_0 - tcl is overriding PARAMETER C_RANGE_CHECK value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 137 IPNAME: axi_interconnect, INSTANCE:axi4lite_0 - tcl is overriding PARAMETER C_RANGE_CHECK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 137 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_D_AXI value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 216 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ADDR_TAG_BITS value to 13 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 320 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_DCACHE_ADDR_TAG value to 13 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 350 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_INTERRUPT value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 384 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_EXT_BRK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 385 IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_EXT_NM_BRK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 386 IPNAME: lmb_bram_if_cntlr, INSTANCE:microblaze_0_i_bram_ctrl - tcl is overriding PARAMETER C_MASK value to 0x40000000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v3_00_a\data\lmb_bram_if_cntlr_v2_1_0.mpd line 78 IPNAME: lmb_bram_if_cntlr, INSTANCE:microblaze_0_d_bram_ctrl - tcl is overriding PARAMETER C_MASK value to 0x40000000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v3_00_a\data\lmb_bram_if_cntlr_v2_1_0.mpd line 78 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_MEMCLK_PERIOD value to 3333 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 110 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S0_AXI_STRICT_COHERENCY value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 153 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S1_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 165 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S2_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 179 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S3_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 193 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S4_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 207 IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S5_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 221 IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_NUM_INTR_INPUTS value to 4 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 71 IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_INTR value to 0b11111111111111111111111111110111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 72 IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_EDGE value to 0b11111111111111111111111111111111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 73 IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_LVL value to 0b11111111111111111111111111111111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 74 The following instances are synthesized with XST. The MPD option IMP_NETLIST=TRUE indicates that a NGC file is to be produced using XST synthesis. IMP_NETLIST=FALSE (default) instances are not synthesized. NCF files should not be modified as they will be regenerated. If any constraint needs to be overridden, this should be done by modifying the data/system.ucf file.