IPNAME: axi_interconnect, INSTANCE:axi4_0 - tcl is overriding PARAMETER C_BASEFAMILY value to spartan6 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 69
IPNAME: axi_interconnect, INSTANCE:axi4lite_0 - tcl is overriding PARAMETER C_BASEFAMILY value to spartan6 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 69
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ENDIANNESS value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 183
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ICACHE_USE_FSL value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 322
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_DCACHE_USE_FSL value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 352
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_SYS_RST_PRESENT value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 228
Cannot determine the input clock associated with port : microblaze_0_i_bram_ctrl:BRAM_Clk_A. Clock DRCs will not be performed on this core and cores connected to it.
Cannot determine the input clock associated with port : microblaze_0_d_bram_ctrl:BRAM_Clk_A. Clock DRCs will not be performed on this core and cores connected to it.
IPNAME: axi_ethernetlite, INSTANCE: Ethernet_Lite - This design requires design constraints to guarantee performance.
Please refer to the data sheet for details.
The AXI clock frequency must be greater than or equal to 50 MHz for 100 Mbs Ethernet operation and greater than or equal to 5.0 MHz for 10 Mbs Ethernet operation. - C:\E\Dev\FreeRTOS\WorkingCopy\Demo\MicroBlaze_Spartan-6_EthernetLite\PlatformStudioProject\system.mhs line 324
IPNAME: lmb_v10, INSTANCE:microblaze_0_ilmb - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v2_00_a\data\lmb_v10_v2_1_0.mpd line 70
IPNAME: lmb_v10, INSTANCE:microblaze_0_dlmb - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v2_00_a\data\lmb_v10_v2_1_0.mpd line 70
IPNAME: bram_block, INSTANCE:microblaze_0_bram_block - tool is overriding PARAMETER C_MEMSIZE value to 0x2000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bram_block_v2_1_0.mpd line 67
PORT: bscan_tdo1, CONNECTOR: bscan_tdo1 - No driver found. Port will be driven to GND - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 230
PORT: bscan_tdi, CONNECTOR: bscan_tdi - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 223
PORT: bscan_reset, CONNECTOR: bscan_reset - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 224
PORT: bscan_shift, CONNECTOR: bscan_shift - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 225
PORT: bscan_update, CONNECTOR: bscan_update - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 226
PORT: bscan_capture, CONNECTOR: bscan_capture - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 227
PORT: bscan_sel1, CONNECTOR: bscan_sel1 - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 228
PORT: bscan_drck1, CONNECTOR: bscan_drck1 - floating connection - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v2_00_b\data\mdm_v2_1_0.mpd line 229
IPNAME: axi_interconnect, INSTANCE:axi4_0 - tcl is overriding PARAMETER C_RANGE_CHECK value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 137
IPNAME: axi_interconnect, INSTANCE:axi4lite_0 - tcl is overriding PARAMETER C_RANGE_CHECK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_interconnect_v1_02_a\data\axi_interconnect_v2_1_0.mpd line 137
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_D_AXI value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 216
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_ADDR_TAG_BITS value to 13 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 320
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_DCACHE_ADDR_TAG value to 13 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 350
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_INTERRUPT value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 384
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_EXT_BRK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 385
IPNAME: microblaze, INSTANCE:microblaze_0 - tcl is overriding PARAMETER C_USE_EXT_NM_BRK value to 1 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v8_10_a\data\microblaze_v2_1_0.mpd line 386
IPNAME: lmb_bram_if_cntlr, INSTANCE:microblaze_0_i_bram_ctrl - tcl is overriding PARAMETER C_MASK value to 0x40000000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v3_00_a\data\lmb_bram_if_cntlr_v2_1_0.mpd line 78
IPNAME: lmb_bram_if_cntlr, INSTANCE:microblaze_0_d_bram_ctrl - tcl is overriding PARAMETER C_MASK value to 0x40000000 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v3_00_a\data\lmb_bram_if_cntlr_v2_1_0.mpd line 78
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_MEMCLK_PERIOD value to 3333 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 110
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S0_AXI_STRICT_COHERENCY value to 0 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 153
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S1_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 165
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S2_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 179
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S3_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 193
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S4_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 207
IPNAME: axi_s6_ddrx, INSTANCE:MCB_DDR3 - tcl is overriding PARAMETER C_S5_AXI_REG_EN0 value to 0x0000F - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_s6_ddrx_v1_02_a\data\axi_s6_ddrx_v2_1_0.mpd line 221
IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_NUM_INTR_INPUTS value to 4 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 71
IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_INTR value to 0b11111111111111111111111111110111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 72
IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_EDGE value to 0b11111111111111111111111111111111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 73
IPNAME: axi_intc, INSTANCE:microblaze_0_intc - tcl is overriding PARAMETER C_KIND_OF_LVL value to 0b11111111111111111111111111111111 - C:\devtools\Xilinx\13.1\ISE_DS\EDK\hw\XilinxProcessorIPLib\pcores\axi_intc_v1_01_a\data\axi_intc_v2_1_0.mpd line 74
The following instances are synthesized with XST. The MPD option IMP_NETLIST=TRUE indicates that a NGC file is to be produced using XST synthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.
NCF files should not be modified as they will be regenerated.
If any constraint needs to be overridden, this should be done by modifying the data/system.ucf file.