Changelog on version 7.0.5 Release version 7.0.5 28Jul14 - Fix #547 by adding .schedule command 27Jul14 - Update AUTHORS - Fix bug #2079 with patch from Robert Oschwald 26Jul14 - Fix orphaned file descriptors during errors - Yet another client==NULL - Improve FD and SD cancel - Jim Raney's TLS patch - Update AUTHORS - Fix bug #1679 pool overrides not shown in manual run display - Attempt to avoid client==NULL 23Jul14 - Fix for bug #2082 (hopefully) 22Jul14 - Fix seg fault in jobq.c 14Jul14 - make stop after first error 12Jul14 - Increase status schedule days from 500 to 3000 - Remove bad cherry-pick - Fix compiler warning - Allow options create_postgresql_database from patch in bug #2075 by roos - Fix bug #2074 crashes when no conf file present 10Jul14 - Set pthread id in jcr at beginning so the job can be canceled. - Fix possible heartbeat interval timing problems 08Jul14 - Fix some errors reported by valgrind. May fix the problem with bsmtp command. - Ensure b_sterror() is using the correct size of input buffer 07Jul14 - Fix possible seg fault 04Jul14 - Fix segfault when trying to stop the bnet_server thread in terminate_stored() 03Jul14 - Fix bad link bug #2076 02Jul14 - Fix compilation of bsock.c when TLS is not available 27Jun14 - Correct L suffix to be LL - Fix bad copy/migrate data header 26Jun14 - On termination shutdown thread server 23Jun14 - baculum: Updated README file - baculum: Update English language texts - baculum: Saving auth file for web server HTTP Basic auth - baculum: Added directory for web server logs - baculum: Added example Lighttpd configuration for Baculum and sample web server auth file - Expanded auth error message - baculum: Support for web servers which do not provide direct info about HTTP Basic auth 15Jun14 - Fix limit bandwidth calculation - Eliminate strcpy() from bsmtp 12Jun14 - Fix for configuring sudo option for bconsole access - Display correct NextPool overrides + use Job NextPool in restore if available 09Jun14 - Fix Bacula to work with newer Windows pthreads library 17May14 - Fix bug #180 ERR=success in btape when tape error Bugs fixed/closed since last release: 1679 180 2074 2075 2076 2079 2082 547 ==== Release version 7.0.4 02Jun14 - Better error handling for cancel command 01Jun14 - Fix compiler warning + simplify some #ifdefs 22May14 - Fix copy/migration to second SD 19May14 - Fix calls to sl.set_string() - Improve sellist code ===== Release version 7.0.3 12May14 - Fix error handling in do_alist_prompt - Tighten error condition handling in sellist - Add new cancel test 06May14 - Update LICENSE and LICENSE-FAQ 03May14 - Also update autoconf/aclocal.m4 - Reschedule on error caused EndTime to be incorrect -- fixes bug #2029 - Flush console queued job messages -- should fix bug #2054 - Attempt to fix FreeBSD echo/printf, bug #2048 - Update to newer libtool + config.guess - Recompile configure - Apply fix supplied for acl.c in bug #2050 01May14 - Fix a SD seg fault that occurs with over committed drives 28Apr14 - Clear bvfs cache and set debug options available only for admin - Moved auth params to curl opts - Filtred single results for restricted consoles 27Apr14 - Removed unnecessary debug - Changed e-mail address in gettext file - Support for customized and restricted consoles 15Apr14 - Misc changes for rpm building (made by Louis) 13Apr14 - Updated requirements for Baculum 12Apr14 - Apply fix for bug 2049: wrong drive selected 11Apr14 - Fix #2047 about bthread_cond_wait_p not declared 09Apr14 - Fix Bacula bug #2044 -- fix Makefile for bplugininfo linking - Fix Bacula bug #2046 -- sellist limited to 10000 - Fix Bacula bug #2045 -- multiply defined daemon_event - Fix Bacula bug #2020 overflow in btape -- Andreas Koch Bugs fixed/closed since last release: 2020 2029 2044 2045 2046 2047 2048 2050 2054 Release version 7.0.2 02Apr14 - Remove more vestiges of libbacpy - Put back @PYTHON@ path in configure - Fix improper string in parser - Remove libbacpy from rpm spec files - Fix linking check_bacula - Fix new SD login in check_bacula - Tweek docs build process Release version 7.0.1 31Mar14 - Remove old plugin-test - Update po files - Enable installation of the bpluginfo utility - More tray-monitor updates - Add Simone Caronii to AUTHORS - Align command line switches in manpages. - Apply upgrade to config.guess - Remove bgnome-console and bwx-console leftovers. - Update tray-monitor header also for new bsock calls - Attempt to fix nagios to use new bsock calls - Update tray-monitor to new bsock calls ========== Release version 7.0.0 24Mar14 - Add Josip Almasi to AUTHORS - [PATCH] Support for restricted consoles in BAT config - [PATCH] Fix for free director directive - [PATCH] Fix auto-select restricted console for director in bconsole - Realign output display - Update ua_output.c from Branch-6.7 - Add some missing Branch-6.7 updates - Added needed empty directories to Baculum - Fix for support PostgreSQL, MySQL and SQLite - Framework adjusting to Baculum database connections - Framework fix for lower case tables names in MySQL - Fix for Baculum SQLite support - Initial commit Baculum - Add Marcin to AUTHORS file - Strip trailing blanks - Update copyright year - Update LICENSE and header files - Remove old file - Add new header in misc files - Remove tray-monitor bwx-console manual installation - Remove FD python and examples - Fixup spec files - Remove pythonlib from lib - Update package-list - Fix SDCallsClient daemon synchronization - Add debug code + make 127.0.0.1 same as localhost for tls tests - Fix multiple DIRs in console - Make failure for bat to connect to DIR non-fatal - Fix bat style to one that works - Take disk-changer from Branch-6.7 - Simplify Version output - Fix FDVersion for SD Calls Client test - Update accurate test - Update differential test - Add new regress timing scripts - Improve plugin make clean - Implement regress FORCE_SDCALLS - Remove win32 tray-monitor and wx-console directories - Remove regress-config need only regress-config.in - Add configure archivedir - Improve SQL failure reporting - Major backport from BEE to community - Add copyright to mtx-changer.in Release version 5.2.13 19Feb13 - Fix build/configure problems with bpluginfo.c - Add missing vol_mgr.h file - Add timer to run_multiple 18Feb13 - Refactor lock_volumes so most lock a vol rather than globally - Add virtualfull-extreme test 17Feb13 - Apply patch for chio-changer-openbsd from bug #1984 -- Implements listall - Add bat Mac patch from bug #1953 16Feb13 - Fix bug #1812 cannot run Copy/Migrate jobs from bat - Fix loading of bat translations. Patch from bug #1890 - Fix text input in bat. Fixe bug #1965 - Remove Device from show command as it is not used or updated 13Feb13 - Fix #1982 update enabled keyword in help command 08Feb13 - Fix update_postgresql_tables 10 to 11 30Jan13 - Clean after building doc binaries requested by Willem vd Akker for Debian build 29Jan13 - Remove unused method - Require Qt version 4.8.4 - Fix bug #1955 that OK to run? does not retry on bad response - Backport new lock calls + debug for SD 26Jan13 - Remove old todo 09Jan13 - Fix bug #1975 new label ignored when first is duplicate. 31Dec12 - Require Qt 4.8.1 to build bat 27Dec12 - Make compile of timelimit a bit more portable 26Dec12 - Tweek turn off prune-test - Pull src/lib changes from master - Pull SD files from master 25Dec12 - Turn off prune-test - Add logdir and bsrdir to regression config - Add bsrdir and logdir to regress-config - Rebuild configure - Changed default directories from /var/bacula to /opt/bacula - Fix patches from master - Make spool size max message more explicit - Display more info when maximum spool size is reached 23Dec12 - Fix TERM defs for Solaris 11 in conio.c 21Dec12 - Force DEVELOPER on during regression setup 14Dec12 - Allow group to cd to sysconfdir 09Dec12 - Make sysconfdir belong to Bacula user/group and exclude others 07Dec12 - Fix Virtual Full file close bug -- race condition - Enhance mount message to include read/append 06Dec12 - Improve vol_mgr swap messages - Add Jmsg7 and Jmsg8 - Enhance output of Using Device to include for read/write 04Dec12 - Add jobid to Pmsg output 29Nov12 - Fix bug #1959 input validation on delete of jobs. 24Nov12 - Fix bug #1956 Authorization Errors false 23Nov12 - Add workaround for #5507 where autoprune and reload are in deadlock 21Nov12 - Allow conf file quoted strings to be used in a list - Make bfgets handle very long lines - Backport from Enterprise 17Nov12 - Avoid seg fault by checking for NULL client -- reported by Arno 10Nov12 - Final fix of bug #1943 08Nov12 - Fix bug #1948 MailOnSuccess get executed on error. 07Nov12 - Fix missing index on Media table 06Nov12 - Fix bug #1943 no message storage on closed database connection. - Fix bug #1946 Fix problem with MySQL with big Base jobs. 02Nov12 - Reduce wait time in regression RunScripts - Attempt to indicate timed out tests - Implement a timeout on regression tests of 15 minutes - Fix #5346 .bvfs_lsfiles and .bvfs_restore to handle deleted files 01Nov12 - Fix spooldata, accurate and ingnoreduplicate run argument 21Oct12 - Add remote regress test script 16Oct12 - Fix messages segfault 10Oct12 - Recompile configure.in - Implement feature request #1939 07Oct12 - fix #1938 about PATH_MAX on hurd - fix #1938 about MAXPATHLEN on hurd 05Oct12 - Fix bug #1937 OpenBSD autochanger example script 25Sep12 - Fix #4996 about MaxRunTime canceling the job too early 19Sep12 - Fix bug #1934 Wrong values at media list in BAT 18Sep12 - Fix race condition in close_msg that causes seg fault 16Sep12 - Fix double unlink - More tests for freeing NULL pointers 14Sep12 - Add MaximumConcurrentReadJobs directive to Storage resource 03Sep12 - Add ujobid to .bvfs_get_jobids 28Aug12 - Do not try to strip RestoreObject during attribute encoding - Avoid problem when stripping a relative path 16Jul12 - Fix #4513 about HIDDEN attribute set to parent directory during restore Bugs fixed/closed since last release: 1812 1890 1934 1937 1938 1939 1943 1946 1948 1953 1955 1956 1959 1965 1975 1982 1984 4513 4996 5346 5507 Version 5.2.12 13Sep12 - Fix accurate option in the estimate command - Fix bug #1932 director crash. Version 5.2.11 10Sep12 - Add JobId to SD debug output - Commit batch session every 800,000 files - Simplify safer delete code using a single regex 08Sep12 - Clean up error message generation during update attributes -- should fix bug #1823 - Eliminate heartbeat error messages. Fixes bug #1925 07Sep12 - Set bsrdir default to workingdir - Recompile configure.in - Apply patch from bug #1911 to implement --with-logdir 06Sep12 - Add chio-changer-openbsd submitted in bug #1903 - mysql database install/update scripts patch. Fixes bug #1901 - Delegate uid/gid changing to systemd. Fixes bug #1905 05Sep12 - Fix bug #1906 - Fix manpage errors, fixes bug #1907 - Final fix for #1859 missed one query. 30Aug12 - bpluginfo - Utility tool display various information 19Aug12 - Backport more master code - Fix Makefile.in so that testfind builds with acl dependency 18Aug12 - Make dump_resource respect console ACL's - Backport more from master 17Aug12 - backport code from master 16Aug12 - Fix #1923 about MySQL 4 support for BVFS 05Jul12 - Fix #1902 about bad status slots output - Fix Sigma Copy bug #4377 03Jul12 - Fix bsmtp - Reset bsmtp to only send to IPv4 mailhosts. Bugs fixed/closed since last release: 1823 1859 1901 1902 1903 1905 1906 1907 1911 1923 1925 4377 Version 5.2.10 27Jun12 - Add extra test for unsupported Protocol Families. 26Jun12 - Fix inet_pton call. - Real fix of bug #1897 5.2.9 breaks IPv6 connectivity - Fix bug #1891 wrong daemon name printed with -? option - Fix bug #1859 INSERT INTO Counters fails 25Jun12 - First try at fixing bug #1897 5.2.9 breaks IPv6 connectivity 23Jun12 - Convert write_rec_to_block() to a state machine 18Jun12 - Fix bat from eating all Dir connections -- fixes bug #1872 - Back port fixes from BEE to fix Windows bug #1892 15Jun12 - Add block checksum flag to version.h - Add block checksum debug code - Fix bug #1893 dbcheck -B gives rwl_writelock error. 13Jun12 - Remove restriction of network buffer size being multiple of a tape block 11Jun12 - Recompile configure.in - Add rudimentary support for saving AFS acls. 04Jun12 - Send level before the fileset in estimate_cmd() like in backup() Bugs fixed/closed since last release: 1859 1872 1891 1892 1893 1897 Version 5.2.9 11Jun12 - Remove patch: Apply readline without TERM_LIB dependency patch from bug #1871 Version 5.2.8 10Jun12 - Apply readline without TERM_LIB dependency patch from bug #1871 - Ensure cancel status is set for canceled duplicate jobs -- partial fix for bug #1851 - Enhance Win32 error messages -- fixes bug #1879 09Jun12 - Apply patch from bug 1876 to permit dot commands in a runscript - Remove config variables from examples/devices fixes bug #1884 - Add more debug code for bug 1885 - Add more debug to block.c when read rejected - Fail job that attempts to read from closed device -- reported in bug 1885 but not fixed - Detect Python 2.7 fixes bug #1888 - Recompile configure - Apply systemd patch from bug #1886 08Jun12 - Rewrite some SD subroutines as class members 05Jun12 - New overhaul of xattr code. 03Jun12 - Use IPPROTO_TCP for SOL_TCP if SOL_TCP isn't defined. - Fix compiler warning. Bugs fixed/closed since last release: 1851 1871 1879 1884 1886 1888 Version 5.2.7 02Jun12 - Correct Qt version needed for bat 01Jun12 - Turn on SD deadlock detection by default - Fix bug #1880 ltdl.m4 missing for new feature. - Fix bug #1870 GNU binutils-gold build failure. - Fix bug #1874 crash with xattr support on a BTRFS filesystem 31May12 - Add new empty netinet/tcp.h so Windows compile works - Eliminate compiler warning in stored/dircmd.c 30May12 - Fix TCP Heartbeat code 28May12 - Align conio.c struct at 8 bytes to fix Sparc bus error. 18May12 - Fix get_basename() -- rewrite 15May12 - Apply James' exchange-fd.c regression fix 05May12 - Add first Dutch translation 30Apr12 - Ensure that StorageId is updated after write - Fix updating of cached slots + error message numbering 29Apr12 - Remove old shared objects before install 22Apr12 - Add missing dummy bVarPrefixLinks variable retrieval. - Rebuild configure. - Fix mysql config for older versions of mysql+config. 20Apr12 - Fix problem in BVFS with concurrent queries - Add more checks to bvfs 19Apr12 - Try to use multi-row insert statements for mysql. - On some platforms intptr_t is in an other include file. - Add support for fcntl(fd, F_CLOSEM) to close filedescriptors. - Use closefrom if available instead of trying to close fds ourself. - Fix class member shadowing. - Move storages tls initialization to proper place. - Fix Copyright on init scripts suse, add specific daemon user & group - Add support for new POSIX getaddrinfo interface. - Recompile configure.in - Apply MSQL detection fixes from bug #1829 - Recompile configure.in - Fix bug #1805 cannot specify hostname in ./configure - Require latest Qtlibs - Fix restore_job restore keyword 18Apr12 - Allow plugin to backup a directory - Print seconds in schedule time as noted in bug #1854 - Change dev->open() to return bool 17Apr12 - Fix #1857 about restore cd command that blocks on empty directory 15Apr12 - Backport new StorageId code 14Apr12 - More definitive fix for update slots bug 13Apr12 - Fix old update slots bug 12Apr12 - Fix #4062 on make_catalog_backup.pl script when user/password are empty 28Mar12 - Fix bug #1853: bacula-sd dead but pid file exists. 23Mar12 - Fix bug #1841 estimate command level=differential goes wrong in accurate mode. 22Mar12 - Fix bug #1842 Incorrect port number reported - Fix bug #1848 bsock.c:335 Socket has errors=1 on call to client 10Mar12 - Force the re-initialization of BaseJobOpts, AccurateOpts and VerifyOpts between two Include{} 08Mar12 - Add test-deltaseq source - Rename delta-test plugin to test-deltaseq Bugs fixed/closed since last release: 1805 1829 1841 1842 1848 1853 1854 1857 1870 1874 1880 4062 Version 5.2.6 17Feb12 - Fix old exchange-fd plugin Accurate checkFile code. 16Feb12 - Insert the slot field as a numeric field. - Update Change log and Release notes 15Feb12 - Fix #1831 by dropping the table before creating it 14Feb12 - Make cd accept wildcards 13Feb12 - First cut wild card in restore cd command -- works in one component only 10Feb12 - Remove bad optimization from Accurate code 04Feb12 - Lock read acquire in SD to prevent to read jobs getting the same thing 03Feb12 - Complicate the prune-migration regression by adding one more job - Implement more robust check in other drives for tape slot wanted - Add more debug to failing test - Fix lost dcr point -- memory loss in Copy/Migration + possible confusion - Make copy-job test handle one more job 02Feb12 - Ensure that bvfs SQL link is not shared 31Jan12 - Fix error printing in acl and xattr code. 29Jan12 - Backport better error debug output for sd plugins. 28Jan12 - Add wait on bad connection for security - Make mtx-changer more fault tolerant - Fix 32/64 bit problems in SD sscanf commands - Fix 32/64 bit problems in scanning commands in SD 26Jan12 - Skip certain filesystem types on some platforms. - Allow BVFS to browse and restore Base jobs - Add error message to .bvfs_clear_cache command 20Jan12 - Fix plugin bug with multiple simultaneous jobs Bugs fixed/closed since last release: 1831 Version 5.2.5 25Jan12 - Disable usage of JS_Warning waiting for a more complete implementation 24Jan12 - Removed old sd plugins which doesn't work anymore. 23Jan12 - Adapt sample-query.sql for Warning job status 20Jan12 - Fix location of Qt dlls for Win64 build 18Jan12 - Fix MediaView::getSelection Bugs fixed/closed since last release: 1824 (1814 1806 1818 non-bugs) Version 5.2.4 18Jan12 - Prepare for adding IPv6 to Windows in the future - Fix bug #1822 Schedule run line parsing fails if value is keyword - Revert to 5.0 size computation in accurate elements, may fix #1821 - Mark that a file was found in the accurate list in the ff_pkt with a variable 17Jan12 - Fix Windows build - Update po files - Definitive fix for MySQL MaxValue problem - Fix python module compilation 15Jan12 - Initialize delta_seq to -1 because 0 means that we have already a version - Back out bad MinValue patch 14Jan12 - Fix bug #1810 use single quotes instead of double quotes for MinValue and MaxValue in catalog 11Jan12 - Adapt bfileview for bvfs tables - Set job status to running when restore job really starts 10Jan12 - Remove ifdeffing that turned off JS_Warning status -- must have been missed test code - Add support for soname setting in libtool. 09Jan12 - Make error somewhat more understandable. - Fix bug #1815 - Fix systemd pid files. 08Jan12 - Fix const char compiler warning 07Jan12 - Limit migration/copy jobs to starting 100 at a time - Avoid conflict with PAGE_SIZE define 06Jan12 - Fix warning reported by clang - Send previous Job name during Incremental/Differential to the FD - Fix bug #1811 Filed fails to backup more then one xattr. - system.posix_acl_default is also an acl stored as xattr - Don't copy xattr and acl streams. - Fix bug #1807 - Recompile configure - Add configure for new redhat spec files - Backport Enterprise spec files - Remove unnecessary break and unused variable - Fix xattr/acl regression script. 05Jan12 - Fix bad memset() reported by clang 04Jan12 - Move ini.c to libbaccfg from libbac - Test new plugin function in bpipe and test plugin - Try to fix openssl problem with signal - Add BSOCK::set_killable() - Set directory attributes when using Replace=Never when Bacula creates them - Use RestoreObject type in Catalog - Add new features in plugin - Add helper for ini files - Implement run accurate=yes/no - Add .bvfs_clear_cache - Add Accurate and MaxRunSchedTime in Schedule resource - fix warning - Fix xattr/acl regression. 03Jan12 - Recompile configure - Fix bug #1802 configure code to detect LZO is broken - Fix bug #1806 failure to save second and more xattr. - Add second xattr to show bug 1806 02Jan12 - Enhance sellist to allow rescanning the list - Fix lib/sellist.c 01Jan12 - Remove double include of sellist.h - First cut selection list 31Dec11 - Fix seg fault in plugin event loop 18Dec11 - Implement slow regression for manual testing things like cancel/stop - Fix slow regress setups 16Dec11 - Fix #3210 about slow restore with bvfs Bugs fixed/closed since last release: 1802 1806 1807 1810 1811 1815 3210 Version 5.2.3 15Dec11 - Revert patch from Ben to not compress man pages on Solaris fix #1801 14Dec11 - Fix bug #3322 don't poll when operator is labeling tapes 13Dec11 - bvfs: Fix mysql REGEXP operator 12Dec11 - Fix Mysql 5.5.18 symbol lookup 08Dec11 - fix utf8/iso8859 problems 06Dec11 - Fix #3419, update stats problem 05Dec11 - Fix cats_test to use the new method names. - Update accurate code to use 1 byte instead of 3 - Fix segfault in accurate code 03Dec11 - Fix compilation warning on FreeBSD Bugs fixed/closed since last release: 1801 3322 3419 Version 5.2.2 23Nov11 - Implement -t option for Bat - Require correct Qt version to build bat - Get new lib/plugins.h - Pull files from Master - Add systemd files - Update po files - Fix script to set mode of cats scripts - Create systemd dir if not already exists - Add Systemd configure options 17Nov11 - Split messages line by line before sending it to syslog() fix #3325 16Nov11 - Fix bvfs_restore on MySQL - Fix #3308 where a SMTP problem can block the director 12Nov11 - Change locking scheme of the mountpoint cache. 11Nov11 - Enhance mountcache with rescan option after interval. 10Nov11 - Add %D option to edit_job_code, simplify callbacks on director side 09Nov11 - Move Zdeflate and Zinflate to seperate file. - Put libraries in the correct order for non shared libs. 07Nov11 - Remove last traces of @SQL_BINDIR@ and @DB_TYPE@ - Fix bug #1774 - Move batch insert detection into db.m4 06Nov11 - Free jcr in btape before other pointers 04Nov11 - bat: try to fix offset button problem when clicking too much on previous - bvfs: Use single transaction for each job during update 02Nov11 - Add missing bwild & bregex man8 pages - Fix compilation issue of wx-console #1778 31Oct11 - bvfs: fix filter for pattern= bvfs parameter - Improve speed of BVFS with SQLite, Thanks to J.Starek 30May11 - bvfs: add clear_cache function - bvfs: Handle windows drive when building path hierarchy Bug fixes 1774 1778 3308 3325 Version 5.2.1 30Oct11 - Don't define HAVE_POSTGRESQL twice - Don't use the -R (runtime link path) when not using libtool for the linking. 29Oct11 - Fix detection of batch insert enabler functions. 29Oct11 - Add script to list authors - Update AUTHORS - Add new updatedb files - Make PurgeMigrationJob directive name correspond to doc - Put Win exchange plugin debug code on level 100 - Remove old gnome console files - Update po files 28Oct11 - Fix bug #1771 BAT crashes. 27Oct11 - Fix regression on Solaris. 25Oct11 - Prohibit multiple Jobs from writing state file at same time - Apply autochanger temp file security fix to examples files - Update date 23Oct11 - Fix to Windows socket error detection -- should fix bug #1770 20Oct11 - Fix regression in keyword of migrate pool patch 19Oct11 - Try to eliminate multiple blank lines output in bat - Remove Version browser from bat (broken) -- use brestore panel instead 16Oct11 - Update Specs and ReleaseNotes - Update po files - Eliminate complier warning - Pull files from master - Fix small things in Windows depkgs build scripts - Update autoconf conf file for Win32 - Fix Win32 build after new debug patch in smartall.c - Ensure log files in first backup are restored 11Oct11 - allow to use ./sign alone - Modify ./release/sign to be able to use an other gpgkey (idea from Bruno) - Send level command before fileset as sugested by Bastian. Fix #1768 - Enhance smartalloc abort 10Oct11 - First attempt to fix vtape-autoselect-test bug - Add more info to tape error msgs 26Sep11 - Fix lurking bug in match when db_driver is not set (everything but DBI). 23Sep11 - Fix bug #1764 plugin_list shadows global variable of mysql 5.5 19Sep11 - Update auth troubleshooting URL to use MANUAL_AUTH_URL macro - Define MANUAL_AUTH_URL in baconfig.h 17Sep11 - Fix #1762 about bat version browser performance problem 16Sep11 - On restore we don't have a full FF_PKT so we lstat the file. - Add XATTR and ACL flags for backup and restore. - Lower some messages from level M_ERROR to M_WARNING in acl/xatttr. 07Sep11 - Fix spooldata and ignoreduplicates run command options to use JCR instead of the Job resource. 30Aug11 - Fix #1761 about create_postgresql_database 22Aug11 - Apply htmldir fix provided by Philipp 20Aug11 - Fix possible buffer overrun in exchange plugin 17Aug11 - Add help for "use" command as suggested by Thomas Mueller - Fix error message with bad dot commands 16Aug11 - Drop unused sqlite_dump function from make_catalog_backup.pl - Adapt make_catalog_backup.pl for backend 09Aug11 - Fix backtrace detection in configure 06Aug11 - Make bat run dialog present only allowed levels 05Aug11 - Fix bat seg fault in FileSet view Bug fixes 1389 1444 1448 1466 1467 1468 1476 1481 1486 1488 1493 1494 1497 1499 1501 1502 1504 1509 1511 1513 1516 1524 1526 1527 1532 1536 1538 1541 1542 1549 1551 1553 1554 1558 1559 1560 1564 1567 1568 1569 1571 1574 1577 1581 1582 1584 1587 1594 1595 1600 1601 1602 1603 1604 1606 1608 1610 1612 1623 1624 1633 1643 1648 1655 1661 1664 1666 1669 1672 1675 1684 1685 1695 1696 1699 1700 1703 1735 1741 1749 1751 1761 1762 1764 1768 1770 1771 2710 Version 5.2.0rc1 08Jul11 - Fix libtool definition and make the helper script executable. - Use a helper script to link the correct database backend. - Sync libtool to 2.4 version. - Fix #1741 about possible problems with fnmatch 07Jul11 - Add missing stream in bscan, fix #1749 - Change intmax_t to int64_t to fix #1664 - Fix compilation with gcc 4.6.1 06Jul11 - Add mutex priority check for changer mutex - Fix deadlock with autochanger - Fix #1602 about Uninstall /S that should not prompt for user interaction 05Jul11 - Change JobFiles display from %f to %F in RunScript because %f was already affected to Fileset name 28Jun11 - Update config.h.in for LZO flags - Fix brestore compilation from previous patch 21Jun11 - Solaris make doesn't like comments in make rules. - Fix OSX acl regression test. - Storing the result in a local variable from sql_num_fields saves us a lot of callbacks. 15Jun11 - Add extra check for pInfo size when loading plugin 14Jun11 - Fix [bs #2710] about Storage combo that is too small - Make bad Storage check in is_on_same_storage non-fatal 04Jun11 - Alter the manpages install target to handle optional compression - Add barcodes help to label command - Remove class member shadowing. - Eliminate some old bnet code 03Jun11 - Fix small memory leak when job get canceled. 01Jun11 - Fix small memory leak in dbcheck not calling free_pool_memory for name variable. - Remove global variable shadowing by local variable. 31May11 - Fix the lockmgr test tool - Fix dbcheck to use the new runtime checks for mysql and not compile time. - Restore db_type printing to dbcheck -B 30May11 - Fix unitialized DeltaSeq during Verify jobs - Make delta_seq same size as in other places - Remove broken code 18May11 - Add LZO compression support in bacula-fd. - Add COMPRESS_MANPAGES substituted variable to autoconf 17May11 - Allow va_arg in Dmsg/Jmsg director plugin functions 16May11 - Add db_strtime_handler to get DATE fields from database - Drop AFS detection. - AC_CHECK_DECL doesn't seem to work so lets do it somewhat differently. 13May11 - First attempt at fixing bug #1735 where acls on OSX doesn't seem to reach the backup. 10May11 - Drop old unused protypes from before backend refactoring. 04May11 - Don't force job duplicate checking on copy and migration jobs. - Simplify the code path in migration and copy jobs - Allow duplicate job check override from run cmdline for migrate and copy jobs. - Initialize spool_data_set as boolean. - Add stat packet size to encode/decode_ routines to detect compile differences 29Apr11 - Drop unused variable. - Make the solaris init scripts user/group aware 30Apr11 - Correct fix for bat brestore crash - Kludge fix to bat brestore crash 29Apr11 - bat: Call parent constructor in all pages - Add debug to bat label seg fault bug 21Apr11 - Use user arguments when upgrading catalog - Change all sm_checks into Dsm_check for performance reasons - Free database results on class destruction (e.g. when reference count == 0) 20Apr11 - Allow custom variables and checks from debian/ubuntu startup scripts 19Apr11 - Fix couple of g++ warnings 15Apr11 - Ensure the directories for solaris init scripts are created - Honour DESTDIR in Solaris install-autostart targets - Collapse Solaris install-autostart targets 13Apr11 - Update AC_INIT use to make configure handle docdir properly 19Apr11 - Some more use DeltaSeq instead of MarkId 16Apr11 - Update Catalog version and use DeltaSeq instead of MarkId - Fix Sqlite driver seg fault 13Apr11 - Fix #1612 about checksum for hardlinks 02Apr11 - Some more code sniplets of no need to call thr_setconcurrency anymore. - For Solaris 9 and higher there is no need to call thr_setconcurrency anymore. - Execute the Index creation for mysql in bvfs.c - Use B_ISSPACE in scan.c and reformat comments a bit. 06Apr11 - Fix nanosleep for Windows - Use %s when displaying bandwidth limits in FD status 03Apr11 - Fix reference to uninitialized stack variable - Remove FATAL error for ignored events in old Exchange plugin 02Apr11 - Fix uninitialized stack variable in bextract - Remove temp index on start and term of dbcheck 28Mar11 - Fix brestore that should have miscDebug enabled to start a restore job 10Mar11 - Fix kb/s to kB/s in FD output - bacula-web: Sync with Davide repos 07Mar11 - Fix for duplicate jobmedia records bug #1666 - Fix bug #1703 unable to bextract compressed files 06Mar11 - Fix some esc_obj handling in DBI and wrong free in postgresql.c 05Mar11 - Get full Windows Version display string - Fix seg fault in PostgreSQL driver code - Remove _ in restore_job - Attempt to disactivate old exchange-fd.dll if no plugin= line in FileSet 03Mar11 - Add tray monitor to windows installer - Fix QT tray monitor compilation on windows 02Mar11 - Fix tray-monitor qmake project file 01Mar11 - Add extra Bacula plugin variables 26Feb11 - Fix Windows build entrypoints 25Feb11 - Add new maxuseduration-test - Fix bug #1389 MaxUseDuration uses job start instead of first write time - Better fix for bug #1603 restart of Virtual Full 22Feb11 - Use system malloc in strack_trace() instead of smartalloc 24Feb11 - Fix bug #1603 restart of Virtual Full becomes a Full - Use jcr->is_xxx instead of direct tests - Fix bug #1608 btape test failure when block size too big - Fix week of year schduling bug #1699 - Comment out unused variables in tray-monitor - Fix uninitialized variable in bat - Fix lock race conditions in bug #1675 - Rename incomplete to rerunning for clarity 23Feb11 - Fix bug #1700 no timestamp with -dt on Windows - Use jcr->setJobStatus() in favor of set_jcr_job_status(jcr...) - replace set_Jobxxx by setJobxxx 21Feb11 - Add more debug to restart regress scripts - Add stack_trace() function to print current thread backtrace - Add HAVE_BACKTRACE in configure.in 16Feb11 - Add %h option in runscript to get client address 21Feb11 - Fix seg fault during cancel in SD 19Feb11 - Discard old messages in beginning of maxtime-test 18Feb11 - Fix #1696 about an error when displaying "Base" level keyword. 14Feb11 - Fix #1695 about bacula-sd crash in detach_dcr_from_dev() 08Feb11 - Rename ua->err to ua->errmsg 07Feb11 - B_DB is a class now not a struct lets fix the include files. - Check some user inputs in purge and restore commands - Check if resource name is valid in acl_access_ok() - Avoid extra strlen() in is_name_valid() - Add negative numbers to bsscanf - Apply get_basename to printed filenames to reduce unnecessarily long paths 06Feb11 - Add MAKEOPT to conf for regression - Fix double query in db_list_basefiles() - Fix chgrp on bacula-x.conf - Allow using sql_fetch_field() in db_sql_query() callback for SQLite 05Feb11 - Use old list_result() in db_list_xxx for good formating 04Feb11 - Increase Windows backup/restore privileges possible fix to Virtual Disk ticket 05Feb11 - Use db_escape_string() in all db_xxx functions - Pull src/lib/Makefile.in from master 03Feb11 - Add configure magic for detecting getpagesize - Implement mntent_cache on top of the new htable code using a small htable big buffer of 128 Kb to start with. - Added support to htable for giving a hint on the number of pages to allocate for the buffer used for hash_mallocs so we can have htables without the previous default of 10 Mb. 05Feb11 - Implement chgrp on bacula-x.conf if user configs a Dir/SD/FD group - Rebuild configure - Remove old scripts no longer used - Add patch from bug #1574 for Scientific Linux spec - Apply patches from bug #1672 to clean up configuration - Check if volume name is valid in select_media_dbr() - Small change to exporting functions not found in include files on some platforms. Wrap it as one extern "C" block just like its done on most platforms in the proper include files. - Fixed some compile errors in IRIX and TRU64 xattr code which is kind of hard to test without a proper platform. Compiled it now using some tricks on an other platform defining it is the given platform and fix the compile errors that way using a fake header file. 04Feb11 - Improve bat stability by checking if page valid - Fix segfault with print_memory_pool_stats() - Drop last SQL_INC leftovers. Due to backend abstraction there is no need to include backend specific include files anywhere then in the backend driver which use now per backend specific include directives. SQL_INC is not set by configure anymore and should not be used anymore. 03Feb11 - Remove reference to @SQL_INC@ in tools Makefile.in - Pull in lib.h from master so new htable code compiles - Use C99 __VA_ARGS__ instead of GCC extention ##__VA_ARGS__ - Adapt bvfs for SQLite3 - Adapt htable code to 64 bit keys - Rename db_list_ctx.cat() to db_list_ctx.add() - Fix bvfs for mysql 01Feb11 - Add simple way to add string elements to db_list_ctx 03Feb11 - Add code to trim heap after big mallocs 01Feb11 - Close cursor in big sql query 30Jan11 - Fix bad character in cats/sql_cmds.c 31Jan11 - Removed old queries from sql_cmds.[ch] which are no longer referenced and thus polluting the namespace for no obvious reason. - Fix possible core-dump as seen in regression testing 28Jan11 - Ensure that we always close the transaction in db_big_sql_query() - Implement db_big_sql_query() that uses cursor on PostgreSQL and limit memory usage in db_list_xxx - Detect mount/junction points and ignore junctions in Windows 25Jan11 - Added set_db_type function to set global debug symbol removed when doing class based catalog backends. Coding is a bit different as we need get_db_type which needs a bdb class so we have to set it as part of the loop over all catalogs. This way we may set the global variable a couple of times but the code frees the global variable if needed so other then being somewhat overkill no harm is done. - Drop removed catalog function prototype. - Fix logic inversion. - Add more ingres code - Adapt bbatch and cats_test tool to new cats 18Jan11 - Backport changes for Windows compiling - Backport one more patch into master from class based catalog backend code. - Backport of class based catalog backends into Branch-5.1. 25Jan11 - Fix #1684 Use --with-db-password option in grant_bacula_privileges scripts 23Jan11 - Free unused pool memory after restore - Add pool memory debug output 13Jan11 - Fix build of Windows bat -- Qt depends on libgcc_s_dw2-1.dll 23Jan11 - Change accurate CurFile allocation size 19Jan11 - Add more tests on cats_test - Add cats_test unit tests 15Jan11 - Fix #1685 about JobBytes counter when using Accurate/BaseJobs with checksum 12Jan11 - Ignore replace=xx for directories. Corrects (not total solution) ticket 2317 and bug #1444 - Add restore replace=never test ticket 2317 - Add replace=xxx on restore command line 10Jan11 - Add restore_job= option to restore command 06Jan11 - Add windows tray monitor to bat make-win32 script - Adapt traymonitor qmake project file for win32 - Add cross-win32 target to qmake template - Add new QT traymonitor - Add qt traymonitor files to configure.in - Add transparent icon with tape 05Jan11 - Fix #1661 about verify differences with VERIFY_VOLUME_TO_CATALOG 02Jan11 - Remove tray-monitor from Win32 build - Fix some double Win32 #ifdefs - Fix missing HAVE_LITTLE_ENDIAN for Win32 build 30Dec10 - Add helpers to add drives in VSS snapshot from plugins - Make new crc32.c work on FreeBSD - Fixes some problems in update_sqlite3_tables.in 29Dec10 - Handle all FD version in check_bacula - Fix compilation warning in check_bacula 21Dec10 - Make new bat progress view compatible with previous FD - Keep the same keywords as in previous version 20Dec10 - Modify Job view to follow backup progress in real-time - Update ".status client running" output for new Bat screen 25Dec10 - Ensure that Job duration is not negative - Add Slot to Media View table 20Dec10 - Fix compiler warning. 19Dec10 - Set proper status of autochanger slots with 0 on startup -- no volume rather than unknown 14Dec10 - Add indentation in lsmark command output 17Dec10 - Change SELECT count(*) to SELECT 1 .. LIMIT 1 to speed up PostgreSQL and Innodb in is_volume_purged() 01Dec10 - Fix #define when using --disable-smartalloc 17Dec10 - Track unbalanced start/end plugin stream 12Dec10 - Try to bug where we stop reading before the plugin end is returned - Fix end plugin stream index 16Dec10 - Add missing switch values although the code works this is cleaner. Give better error when trying to restore a particular type of acl on a filesystem without support for those types of acls. 15Dec10 - Added support for NFSv4 ACLs added to FreeBSD 8.1. Some small updates to some comments of other ACL implementations. - Added additional extended attributes used under FreeBSD for the storage of ACLs. 14Dec10 - Allow closing of all tabs + close tab clicked 13Dec10 - Add short-incremental regression test 12Dec10 - Print plugin end records in bls - Center bat run window on screen 03Dec10 - Fix #1669 making director's address required in traymonitor.conf 27Nov10 - Update bat console display only if new text comes in - xPut debug code on test + fix focus on Volume in label dialog box 12Nov10 - Improved error message when drive busy - Ensure that bat.conf is updated when bconsole.conf is 09Nov10 - Make Win32 service name include the word Backup 25Nov10 - Add PurgeMigrateJob Job resource option to purge job on successful migration 24Nov10 - Move accurate test in BackupCommand for delta and delta-test plugins 25Nov10 - Add delta_seq available for plugin restore 24Nov10 - Prepare for adding high bits to Stream - Use new FO_xxx bits in backup/restore and plugins - Define new stream bits - Separate definitions of streams, filetypes, and fileoptions to separate files - Rename bEventVssSnapshotLetters to bEventPrepareSnapshot - rename plugin->len to plugin->file_len 23Nov10 - Handle all kind of plugins when computing plugin name length - Allow plugins to add drives to vss snapshot - Ensure that two plugins starting with the same name won't share events - Don't define DLL_IMP_EXP twice in fd_common.h 22Nov10 - Add execute bit to systemstate test 21Nov10 - Update delta plugin to raise error if we get delta back melted - Insert Delta in bootstrap by JobTDate - Modify MySQL accurate query with Delta - Add missing MarkId in mysql accurate query - Add delta option to db_get_file_list() 20Nov10 - Support restore with Delta in Director - Add delta_seq to restore tree code - Add db_get_file_list_with_delta() for restore - Fix delta-test-fd - Ensure that sparse stream is set when delta enabled - Make non accurate fatal for delta-test plugin - Update bfile.offset when with plugin offset - Update delta plugin - Add delta-test plugin - Pass Delta Sequence to save_pkt and restore_pkt - Clear delta sequence when not using in plugin - Remove spaces, try to stop FD faster on cancel - Implement incrementation of delta_seq (I think) - First cut Delta code in FD 19Nov10 - Don't compute accurate list with MD5 if not used - Use JobTDate instead of StartTime, and sort by JobTDate instead of JobId 05Nov10 - Avoid warning for win64 19Nov10 - Fix tray-monitor compilation 04Nov10 - Fix check_nagios compilation 18Nov10 - Add delta sequence to batch mode, accurate query and file daemon ff_pkt 17Nov10 - Start adding DeltaSeq 15Nov10 - bvfs: support basejobs and migration for PostgreSQL - bvfs: support for bweb user acl 13Nov10 - Fix win32 build - More porting from Branch-4.0 06Nov10 - Add check_changes to bacula def 27Oct10 - Add -l and -a options to drivetype tool 19Jul10 - Add debug info to smartall.c for buffer overrun 30Aug10 - Make RestoreObject compatible with older FDs 15Jul10 - Make VSS snapshot failures fatal 12Jul10 - Add bEventVssBeforeCloseRestore per James 24Jul10 - Call plugin bEventEndxxxJob even if Job canceled 06Nov10 - Fix Windows build to know about exepath 07Nov10 - Allow some plugin variables to be available during loadPlugin() 06Nov10 - Add bVarExePath to let plugins know about exepath 02Nov10 - Fix compilation warning about void* to int cast 24Oct10 - Remove extra EndTime displayed on the first line of the Job status report 12Nov10 - Prevent timer recursion in bat 07Nov10 - Implement close button in bat tabs 24Oct10 - Set daemon name and host name to zero 05Nov10 - Permit to get Where/RegexWhere from Plugin and give access to Accurate data - Allow Plugin command without argument - Fix compilation problem on win64 03Nov10 - Stop restore if job is canceled - Make sure JobErrors is always nonzero on fatal error 02Nov10 - Fix bug #1655 Quitting bconsole with ctrl+d doesn't save history 31Oct10 - Fix bad handling of c: during restore in bat - Ignore unknown dot commands in restore tree code 20Oct10 - Fix ubuntu/debian startup scripts 13Oct10 - Fix bug #1643 about orphan records with delete volume= command 07Oct10 - bvfs: fix mysql query, restore seems to be ok - bvfs: Restore should be ok with MySQL 06Oct10 - Use start-stop-daemon handler to run daemons as bacula:bacula 26Sep10 - Reverted the change of TRU64 to OSF1 for the OS detection rules. Although Compaq/HP renamed OSF1 to TRU64 lets leave it for now. - Fix new IRIX xattr code. Be a bit smarter when freeing data and do it in the exception handler (e.g. after the goto label) - Fix some trivial errors and implemented the restore of IRIX xattrs. - Added first try at supporting IRIX extended attributes. 25Sep10 - Added configure logic for detecting the TRU64 extended attributes interface. Also made the acl and xattr configure logic use the HAVE_XXX_OS_TRUE variable which is set by BA_CHECK_OPSYS macro so we only check for a certain interface that we know only exist on a certain platform when we are running on that platform. This should make the configure output much cleaner. 24Sep10 - Added support for TRU64 Extended Attributes interface. 06Oct10 - Remove SQL lib dependency from btape 05Oct10 - Fix bad copyright in new src/lib/crc32.c 04Oct10 - bat: Add pattern filter and make restore to start from brestore - Adapt bvfs for BaseJobs (path is ok) 03Oct10 - bat: more work on brestore panel - Add .bvfs_restore command - Add .bvfs_get_path to traduce a pathid into a path 02Oct10 - bat: Add new form to run a restore - bat: Add restore job list in console - bat: Add restore option box for brestore - bat: Add runrestore.ui to bat project file - bat: Use current set of jobids for directories - bat: fix drag&drop for new brestore screen 01Oct10 - bat: Try to implement drag&drop for file selection - bat: Add checkbox to allow automatic fileset merging - Add "all" option to .bvfs_get_jobids dot command. - bat: get a simple working brestore file browser using bvfs API - bat: Implement a Date and FileType helper in ItemFormatter - Implement .bvfs_versions command to display all file versions for a client - Update BVFS file versions browser - Add .bvfs_get_jobids to return jobids needed by a job to restore 30Sep10 - bat: Use BVFS on bRestore view 05Oct10 - Fix #1648 about make_catalog_backup.pl with multiple catalog 01Oct10 - Rebuild configure - Fix batch insert detection for MySQL and no .a libraries 30Sep10 - Fix pt_out() that can loose a message if the trace file can't be opened. 23Sep10 - Add missing new stream definitions. - Added xattr interface found in AIX 6.x and higher which mimics the Linux/OSF interface but has just a bit different named functions and the error codes are somewhat different so its not a perfect match to extend the generic interface (which is named generic now instead of the linux interface as it used by Linux and OSX). - Added configure support for the AIX extended attributes interface. - Added extra check for Solaris xattr support so we don't get false positives on other os-es (AIX) etc. 22Sep10 - First compiling version of AIX 5.3 and later acl code using the new aclx_get and aclx_put interface. - AIX also supports setmntent/getmntent so use that instead of much more complicated other interface which is left for AIX systems that might not support the setmntent/getmntent interface. 17Sep10 - Handle the old stream using the old system call just to be safe for now. 16Sep10 - First steps for adding new interface for acls added to AIX 5.3 and later. Added 2 new streams and basic code to handle these streams. Next step is the actual implementation. - Rewrote ACL configure logic to be somewhat better readable in the same style as the new xattr configure logic. 22Sep10 - Add debug to next_vol.c + shorten retention for recycle-test - Fix seg fault introduced during restore cut and paste 21Sep10 - Fix bat browser to ignore copy jobs. Fix bug #1604 - Create dummy to create test data - patch 96793e fixes bug #1584 20Sep10 - Fix bconsole bug with new BNET signals - Add skeleton of new bat run dialogs 18Sep10 - Fix getmntinfo handling on FreeBSD as it seems its the same as OSX (no real surprise). 10Sep10 - Add TODO on AIX acl code - Detect acl_get() on AIX to enable ACL code 08Sep10 - Tweack project file to mark Item 7 done 30Aug10 - Fix the insert_autokey_record functions to be 64bit compliant. This fixes a long standing bug in the postgresql code where the id was converted using atoi which is now changed into a str_to_int64. 17Aug10 - When moving zlib into its seperate ZLIBS variable forgot to update the stored Makefile.in which still uses FDLIBS. But as FDLIBS now only contains libraries explicitly needed for building the filed this doesn't work. This should fix that. This is mostly a problem on Solaris like operating system as the linker doesn't load all dependency libs and gives unresolved symbols. 20Sep10 - Fix bug #1623 about indexes that are already created or deleted in postgresql upgrade process. - First cut of bat rerun a Job from Jobs Run - Allow sorting of more bat media columns - Suppress superfluous warning messages if SD polling 19Sep10 - Add comm error output when cram-md5 fails with comm error 18Sep10 - Quote device name in SD and implement releasing message - Massive bat notifier rewrite + fix seg fault + implement text input dialog 15Sep10 - Fix postgresql version detection in database creation script 13Sep10 - Make Ubuntu autostart scripts LSB compliant 12Sep10 - Fix restore browser to permit checking first item and to start in focus - Fix another bat seg fault - Fix bat seg fault 11Sep10 - Backport 5.0.3 rpm changes. 04Sep10 - Display job information on jobid in Verify screen - Allow to verify any job specified in argument 03Sep10 - Send back updated jobs status from FD - Allow plugin to skip restore if problem - Attempt to eliminate waiting on Storage message during restore - Add quotes around resource name in status output - Change FD protocol version to avoid error message when sending RestoreObjects 22Aug10 - Allow limit= for all list sub commands 12Aug10 - Make third argument of DEVICE::d_ioctl optionnal to emulate varg - Use SMARTALLOC+memset instead of overload new/delete that doesn't work in bat 02Sep10 - Fix bug #1601 where prune client pool=xx apply pool retention for all volumes. 31Aug10 - Add level option to estimate help command - Fix #1633 Windows service is not removed if still running 30Aug10 - Fix #1624 about segfault in dvd driver when calling rewind(NULL) 29Aug10 - Rebuild configure - Add scripts/reload 12Aug10 - Fix batch insert detection on SLES 11 - Add crc32sum in makefile 11Aug10 - Add ENDIAN detection in config.h/configure.in - Use HAVE_LITTLE_ENDIAN in crc32 code 08Aug10 - crc32 optimization - Add crc32 test program 10Aug10 - Update spec files - Modify DEVICE class to use subclass for each driver implementation. - Add USE_FTP in version.h - Add new/delete operators with memset(0) on smartalloc 08Aug10 - Fix bug #1504 -- Error when creating tables in MySQL 5.5 03Aug10 - Remove patches directory 02Aug10 - Fix prune sql handler - Allow sorting of MeditView table columns 01Aug10 - Make Win32 no filesystem change more explicit 31Jul10 - Revert to old block.c to fix recycling 29Jul10 - Remove some old files 28Jul10 - Fix #1606 about OpenSSLv1 detection using non-standard location 27Jul10 - Update the license template files 26Jul10 - Fix postgresql catalog creation when version is not on the first line 25Jul10 - More changes from GPLv2 to AGPLv3 - Fix some missed copyright changes - Switch from GPLv2 to AGPLv3 21Jul10 - Implement %f %b to get JobFiles, JobBytes in a RunScript - Fix bug #1610 handle empty xattr values on Linux and xBSD. - Really free free pool memory before sm_dump - Garbage collect memory pool at end of job and before sm_dump - Ignore STREAM_RESTORE_OBJECTS returned by SD to FD 19Jul10 - Add xattr seg fault protection suggested by Marco for bug #1610 17Jul10 - Add archlinux to os.m4 14Jul10 - More fixes for 32/64 bit problems in smartall - Fix 32/64 bit problem in smartalloc dump routine 11Jul10 - Fix .dump, .die, .exit when DEVELOPER turned off 10Jul10 - Make SD automatically fix the Volume size in the Catalog when out of sync - Add bigger print buffer for sm_dump - Add .dump and .exit commands for daemons 09Jul10 - Use Pmsg in smartall.c rather than printf for tracing Windows 07Jul10 - Up maximum block size to 20M - Fix for TLS bugs #1568 and #1599 02Jul10 - Improve comm line error handling for TLS, may fix bug #1568 and #1599 04Jul10 - Add new tls-duplicate-job test 02Jul10 - Fix SD crash due to mismatched lock/unlock in error condition 29Jun10 - add comments - Fix #1600 about problems with Accurate code on MySQL 26Jun10 - Fix bug #1587 if you have clients with different catalogs configured, both catalogs contains all clients after a reload or restart of the dir - Fix bug #1577 During migration: ERROR in block.c:950 Failed ASSERT: dev->is_open() by moving and commenting out the ASSERT() 24Jun10 - Fix new killsafe code - Add USE_LOCKMGR_SAFEKILL in version.h - Add wrapper for pthread_kill() to check if thread exists before using kill 23Jun10 - Skip HB kill in FD if HB thread terminated 21Jun10 - update windows defs 20Jun10 - Fix crash from unequal volume_lock/unlock calls - Fix pruning for migration jobs and do some optimization - Print TestName at beginning of dump 19Jun10 - Remove prototypes of removed prune queries. 18Jun10 - Adapt new prune code with old db_accurate_get_jobids() 17Jun10 - update prune code - Fix db_get_base_jobid() 16Jun10 - Make new prune algo to work with backup 19Jun10 - Save any dumps during regression to dumps directory - Update LICENSE - Fix crash from rw_lock/unlock miss match 18Jun10 - Attempt to fix duplicate job kill seg fault - Replace pthread_kill by my_thread_send_signal() in jcr.c - Fix postgresql error in grant script - fix #1595 about batch mode detection problem for postgresql with non standard install dir - Add TestName to gdb traceback - Fix accurate code 17Jun10 - Remove bdb from configure 16Jun10 - make new update tables executable - Improve the "update stats" sql command - Improve performance for MySQL with update stats command - Fix Makefile and build problems 14Jun10 - Fix #1594 about prune copy jobs - Fix restore object compression flag -- James 11Jun10 - Add new upgrade script from DB vers 12 to 13 - Add BDB_VERSION for scripts + prepare update 11 to 12 + automate BDB_VERSION checking 09Jun10 - Add first cut Volume names to disk-changer 07Jun10 - Apply literal string fix in printf submitted by Luca Berra 05Jun10 - Drop 2 unneeded AC_DEFINE statements from configure.in for AFS. 03Jun10 - Fix bug #1582 Restore from multiple storage daemons breaks subsequent backups 01Jun10 - Fix segfault on "cancel jobid=" command - Create table with jobids as a temporary table and move the sql definition to sql_cmds.c. We use a default query for all databases but Ingres. - Update makefiles for new libtool revision - Simplify libtool revision and use VERSION as default - Simplify libtool revision 28May10 - Convert all Jmsg on the watchdog thread to Qmsg 30May10 - Don't set socket buffer size unless explicite set by users. Suggested change from bug #1493 - Fix bug #1554 Windows installer doesn't honor /S flag 29May10 - Add z (size_t) prefix to bsnprintf 28May10 - Fix #1571 and install libraries with 755 perms 27May10 - Fix bug #1581 ASSERTs in src/dird/jobq.c can never trigger - Removed workaround for bug in Ingres with insert into tables with sequences from the batch insert temporary table. Added comment to the Ingres make table script to document the bug numbers which should be fixed in the Ingres version to be able to run batch inserts and currently known patch numbers for Solaris x86 and Linux x86_64. 25May10 - Fix segfault in action on purge test 24May10 - First cut Share Point plugin - Add more debug code for bactrace 23May10 - Fix for bug #1569 deadlock/crash in Dir 20May10 - Fix problem with BaseJob and Accurate FileSet options on client side - Do not use mtime with basejobs 18May10 - Optimize the selection process for saving either AFS or Native ACLS by keeping track of the filesystem we are doing a backup of. This way we don't have to check if a filesystem is still either AFS or not as when we know if it is all files on the same filesystem are either AFS or not. We also clear the native save flag when a filesystem says it doesn't support acls so we don't keep on trying saving acls on filesystem that don't support them. 16May10 - Added preliminary AFS acl support. The code may need some testing on a real AFS enabled server as most of the code was written using information available on the Internet. The code compiles and links on Linux using OpenAFS 1.4. - Added fstype rewrite code so we have a uniform way of retrieving the fstype on Linux and OSF1 without the need to add code for each new filesystem added to a OS. 14May10 - First stab at a simple script to dump the content of the complete Ingres bacula database for disaster recovery purposes. 10May10 - Add .dump command - update comments 08May10 - remove pragma warnings 06May10 - Fix problem when sending Cancel event to plugin - first attempt at making bacula set the backup level in VSS - Implement bEventPluginCommand event for systemstate plugin - MySQL compilation fix 05May10 - stop Bacula aborting the job when one of the writers reports a problem 04May10 - Fix #1567 about display of long volume names truncated during restore 03May10 - Fix segfault when loading Plugins 02May10 - Added new bacula-libs package. - Fix RestoreObject for PostgreSQL 01May10 - Move some AC_MSG_RESULT macros around so the configure output looks somewhat cleaner. - Move libz out of FDLIBS into a seperate variable as we need it for libbac.so now too as it also has libz compiled functions. This way we keep the FDLIBS cleaner with only extra libs need for the Filed to compile. - Fix RestoreObject schema on PostgreSQL - Fix insertion of RestoreObject - Change Byline - Remove RestoreObjects when pruning Jobs - Fix bug #1538 Start Scripts return incorrect value - Fix bug #1564 init scripts not LSB compliant - Rework sql queries for update copies 30Apr10 - Don't hardcode temporary table creation as some backend have a somewhat different SQL syntax. - Added missing column in Ingres database definition for new database object as reported by Stefan. 28Apr10 - Patch from Martin to avoid error when single tape used - James' patch - Fix File and Job Retention in show pool command 27Apr10 - Add Polish translation. This translation project is sponsored by Inteos Sp. z o.o. based in Warsaw, PL. - Change Ingres query filter to set a realy early timestamp instead of an empty string which doesn't seem to work on all Ingres versions. - Add new file I missed from James' plugin patch 26Apr10 - Probable fix for SD crash bug #1553 - Remove bad debug line - Add extra lock debug code but turned off - Reduce accurate test output when not debug - Add lmgr_is_locked() function to test if a thread own a mutex 25Apr10 - Put attr.c debug on dbglvl 24Apr10 - Use lwps cmd in dbx and no threads as it seems to give some strange side effects e.g. doesn't work and lwps seems to always work. So lwps it is then. - Fix #1559 problem when restoring pruned jobs with a regexp - Do some work on the btraceback on Solaris, we test to see what debugger is available and we prefer the debuggers in this order: dbx, gdb, mdb. Also enchanced the dbx bactrace somewhat that it always dumps all available threads (e.g. we also changed from lwp to threads for dbx). We also print some variables that the gdb script also dumps on a bactrace. Hopefully we get some better dumps using this. The mdb is used as a last resort as it should be always installed on a Solaris box (dbx and gdb may not) but at the moment I'm still trying to find out how to get some more understandable dumps from mdb as its rather rudimentary and more a crash debugger then a source code debugger. - Fix for bug #1560 bcopy cannot find Volume - Add beef - Update autoconf scripts - Fix Windows build 23Apr10 - Update Ingres RestoreObject table - Add compress/decompress of Object Record data - Fix #1558 about bscan that doesn't update PurgedFiles on Job records - Remove pool zap code that breaks 2drive-concurrent-test - Fix cancel crash bug #1551 21Apr10 - A timestamp can only be assigned to a timestamp in Ingres unless we convert it inline. But why should we the code to get Timestamps is already there so change it and we are allright. - For Ingres always enable batch mode inserts. - reindent some Ingres DECLARE queries so they are better readable. - Lets not use the mdb->transaction bool but create a private one named mdb->explicit_commit as mdb->transaction is used by the bacula core and we need a private setting for Ingres. - Lets have a single exit from db_write_batch_file_records where we always drop the temporary batch table. - Fix job_metadata name problem - Allow traceback with gdb on Solaris 20Apr10 - Implement IS_NUM for Ingres by using eqsqlda.h IISQ_ values for numeric types supported by Ingres. - Correct Pool display in SD status. Fixes bug #1541 - Add performance notes in make_xxx_tables.in files 19Apr10 - Fix Ingres problems with queries with have both an LIMIT and OFFSET clause as we need to reorder this query for Ingres to be understandable we need some more regexp magic for now. Lets make things exentsible and allow for multiple regexps all being fired on a query transforming it into the query to execute. Dropped the encoding check which is for postgresql but not interesting for Ingres now we use VARBYTE and not VARCHAR. - Fix cancel crash reported by Stephen Thompson - Check if sql backend is thread-safe - Fix error message with PostgreSQL on JobHisto sequence 18Apr10 - Add RestoreObject postgresql privilege - Change plugin FileSet function names add NewOptions and NewIncludes - Second cut plugin filesets - Add exclude to test program - Correct new plugin names - First cut more complicated fileset options for plugins - Skip FT_RESTORE_FIRST in verify - Start adding plugin regex filesets 17Apr10 - Reorganize regex code 18Apr10 - Rewind on close to fix #1549 - Add bVarWorkingDir to filed plugins 17Apr10 - Update Ingres temporary table definitions with new datatypes and lengths. - Added extra check to scream when we encounter a database datatype which we don't support yet. This should never happen as we should implement new datatypes when we use them in the schema but some defensive programming doesn't hurt. - Some small indent changes. - Possible fix for big-files-test - Use a dedicated connexion when VirtualFull computes the file list. - Add back line accidentally deleted -- fixes verify-vol tests - Remove inappropriate comments and unused line - Fix badly named index - First stab at rewriting the ingres database schema to allow bigger path and filenames up to the current limit of 32000 bytes. Also reindented the database definitions to the Bacula standards which make it somewhat easier to read. Implemented the retrieval of some additional datatypes in the ingres backend now we switched some types from VARCHAR to VARBYTE. 16Apr10 - Remove closelog() in bpipe fixes bug #1536 - Convert restore object to use STREAM_RESTORE_OBJECT; cleaner code - For now the Ingres type is not TEXT but VARCHAR(256) so lets define the temporary table that way. - Seperate some basejob queries into sql_cmds.c so the code is cleaner and we can specify the Ingres specific definition of a temporary table. - Remove some strange includes halve way this file which seems to be some copied code from the top of the file. - Fix RestoreObject make_sqlite3_table.in syntax 15Apr10 - DISTINCT ON postgresql queries won't work on Ingres so try if the MySQL queries do any better on Ingres. - Small changes to btraceback script so on solaris we don't get strange errors as PNAME is not a single binary name and that doesn't work to great for doing a gcore. - Add install and uninstall of btraceback.mdb script 14Apr10 - Remove bad index tips on mysql creation script - Apply James' patch with my restore object changes - Add vss_close_backup_session after find_files + add object_name to restore object 13Apr10 - Ingres doesn't understand a query string with ORDER BY LastWritten IS NULL,LastWritten DESC,MediaId and we must rewrite it to ORDER BY IFNULL(LastWritten, '') DESC,MediaId which we now do by using an array with the correct order statement per backend in sql_cmds just as some of the other database specific queries. 12Apr10 - Add missing break. Pointed out by James 11Apr10 - Pass restore object to plugin - Restore object now sent to FD - Drop old bdb catalog scripts 10Apr10 - Extract restore object and send to FD first cut - Add Ingres RestoreObject SQL changes - Rename sql_insert_id into sql_insert_autokey_record so things are somewhat cleaner in name and things don't seem to imply we are just a mysql_insert_id replacement, which we are not. 09Apr10 - Turn off plugin debug - Create and put data into RestoreObject table - Create db_create_restore_object_record and code to insert it - Drop all Ingres tables with one commit. - Fix Win32 build - Set level for debug code 08Apr10 - Make build and install of test-plugin for regress automatic - Temp remvoe add exclude 07Apr10 - First attempt to fix plugin excludes - Get binary objects working - Make test-plugin regression test work - Make test-plugin-test script - Create test-plugin-fd - Stuff object in extended attributes - Add FT_RESTORE and first cut handling it 06Apr10 - Add more doc to example-plugin 05Apr10 - Start RESTORE_OBJECT code 08Apr10 - Fixed postgresql grant script which I seem to have updated while I thought I updated the Ingres one. Also added a missing entry as reported by Martin Simmons. - First attempt at using mdb on Solaris instead of dbx which isn't standard on most current Solaris versions. - fix grant_postgresql_privileges doesn t grant permissions on jobhisto_jobid_seq - Add back something that for whatever reason got lost on last big merge. 07Apr10 - Fix stupid inverted logic - Make the batch insert functions return bool instead of int. - Add lock position info to volume manager 06Apr10 - Permits to use lock manager with file/line from outside 05Apr10 - Added empty db_check_backend_thread_safe to dbi backend. - Change cryptic aop name - Make sql_insert_id a atomic function which executes the insert query and when that succeeds retrieves the id the database used for storing the inserted record. Some databases want this to be atomic (e.g. without a COMMIT in between.) Coding wise this is also much cleaner. - Drop have_insert_id in mdb as its always true for all backends. - Lets call it COMMIT and not END as that seems to be the counterpart of BEGIN for transactions. Updated Ingres lock queries to only start a transaction as the current SQL is not valid Ingres SQL. 04Apr10 - First attempt at making things multi-threaded and make it possible to have multiple connections to the database without having the dreaded ERR=E_LQ002E The 'execute immediate' query has been issued outside of a DBMS session. This compiles but seems to give some problems so into the debugger it is. - Use -lq.1 -lcompat.1 as shared libraries instead of linking with -lingres which is a static library. Also need to change generated code of esqlcc a bit to get things to link with the IIsqlca function. - As we have a multithreaded application let tell that to esqlcc so it can optimize for that. - Fix bscan segfault with new comment field 03Apr10 - Creating a database as an other user and giving grants doesn't seem to work for Ingres. Strange so for now create everything using the -u${db_user} option. This is something that needs to be investigated as it should be possible to have an different owner of the database. - Create user in the right database for Ingres. - Do all Ingres operations as the user invoking the script just as for all the other databases. The grant script will make sure the db_user will have the proper access rights to the database tables and sequences. - Fix username argument to sql for Ingres grants. - Replace ASSERT in block.c with fail Job - Make the Ingres grant script work. - Use uint32_t for max_concurrent_jobs - Fix grant script to set grants on correct sequence names and not PostgreSQL names. - Add new item to projects 02Apr10 - Fix bug #1542 File Daemon outputs usage message to stdout instead of stderr - Apply James' rename events patch - Apply James' plugin patch - Added limit_filter which rewrites queries which use the LIMIT functions into something Ingres can understand. Removed all static functions from the myingres.sh file as they are no longer an exported interface (we can always put that back when we have the need to export more functions). Some other rewrites of the code to make it somewhat cleaner. 01Apr10 - Add make_def64 - Fix win32/lib/bacula.defs as pointed out by James - Drop Ingres specific versions of queries with #ifdefs - fixed syntax LIMIT/NULL behavior/improved tests 31Mar10 - Simplify db_check_max_connections code and ifdeffing - Fix SQL warning message about concurrency pointed out by Graham - Fix compiler warning - Add jobs running to status of daemons 29Mar10 - Use file and line for rwlock and lmgr in db_lock() - Add File and Line info to rw_lock for lmgr 27Mar10 - Fix compiler warning. - Fix database locking calling db_lock and returning from function without calling db_unlock. - Apply James' wide char patch - Patch from James - Add bVarVssDllHandle so that a plugin can get GetProcAddress 26Mar10 - Add missing db_unlock to bvfs_update_cache. 22Mar10 - Fix #1532 about permission on binaries - Propose shell replacement to perl code, fix #1516 - Fix #1526 about verify jobs and runscript 20Mar10 - Add 5 minute timout to alert directive -- fixes bug #1536 19Mar10 - Add bEventInitializeVSS as requested by James 17Mar10 - Reduce compiler warnings on Windows build 16Mar10 - Add doc + make some compat subroutines static - Fix Win64 build - Correct mkdir in installer - System State plugin update 14Mar10 - Allow users to build bat without static QT if desired. - Add bat=no make option on Win32 - Fix for qt mkspecs location on Fedora 12. - Second plugin patch - System State plugin first cut 12Mar10 - syntax fix, test improved, empty results fixed - Add read_vol_list mutex to lockmgr prio - Fix #1527 about deadlock during migration - When including term.h we don't need prototypes for tgetent, tgetnum and tgetstr as they are defined in term.h on Solaris. 10Mar10 - Another fix for OpenSSLv1 - Add -lrt to Solaris links 09Mar10 - Fix tls.c for OpenSSLv1 - Add plugin Exclude interface 08Mar10 - Add TODO in bvfs - Fix #1511 when trying to insert more than 50.000 directories in bvfs - Fix plugin load not to stop if one plugin bad -- pointed out by James 07Mar10 - Add Base and Copy to ua_dotcmds.c for Levels and Types for bat - More devlock work - Remove --without-qwt from configure statement. - First cut new device lock code - Fix bug in bvfs_update function, should work much better now - Uses a dedicated connection when running bvfs_update command - Add first cut at Win32 bpipe 06Mar10 - Switch from termlib to ncurses - Second correct fix to bug #1524 verify fails after adding or removing files - Fix bug #1524 verify fails after adding or removing files - Fix bug 1523. - Apply fix suggested by Andreas in bug #1502 for mediaview column sort problem - Lets not generate the ingres code automatically when the .sc or .sh files changes as it seems these files get outdated on some systems and then this rule kicks in on systems that don't have the esqlcc ingres compiler installed. 04Mar10 - Fix CentOS detection in regression get-os script 06Mar10 - Cread subroutines to add exclusion for plugins 05Mar10 - This adds sql debugging to these classes that Eric wrote. - This is a 1/2 fix of the issue. It allows for the sorting of the two non graphic columns, but still does not allow for sorting the graphic columns. The issue is with last. By setting the sort value, you are setting the value on the last. To experiment with what I mean, use the set background that I have commented out in this commit. 04Mar10 - Create AddExclude entry point for plugins 03Mar10 - Lets generate ingres code by calling esqlcc and not esqlc as we want c++ code. Replaced some strncpy by bstrncpy calls. Add dependency in Makefile of generated code on it source file. - Another file to add James' code to get VssObject - Add James' code to get VssObject - Fix OpenSSL 1.x problem in crypto.c on Fedora 12 - Display AllowCompress warning message only if compression used in FileSet 01Mar10 - Added comment on dbi backend needing a recent version of libdbi from CVS as the version currently released 0.8.3 wont work for compiling the code. - Add Warning check to SQL - Fix readline to use TERM_LIB found for conio 27Feb10 - Move bacula shared objects in separate bacula-libs package. - Fix for termcap lib on suse. 26Feb10 - Fix for shared objects name convention change. - Pass jcr to VSS class + minor clean up of VSS code - update date 25Feb10 - Fix compile link flags for gigaslam - Add missing defines for gccver. 24Feb10 - bconsole: make problem in director selection fatal (exit=1) 23Feb10 - Undelete bat help files - Use db_socket parameter in make_catalog_backup_.pl script - Add skeleton of system state plugin - Ensure SD asks for help when looping even if poll set. Fixes bug #1513 22Feb10 - Fix compiler warnings in tools directory - Temp remove savecwd to make Win32 build 21Feb10 - Fix three-pool regress bug - Replace MIN by code as recommended by Marco to avoid compiler warning - Add Fedora 11 and 12 build tags. - Make script more portable 20Feb10 - Forgot one exit. - Fixes for client only build. - Fix seg fault in dup jobs regression test - Remove duplicate. - Possible fix for FreeBSD three-pool regress failure - Remove mysql version variable. - Enable readline support. - Added patch from Stefan Reddig -- improved ingres db test - Added patch from Stefan Reddig -- added some checks, db test prog - bug report 1505 - This version fixes an issue where the console window would start out not docked. It is fixed by initiating the variables in the Pages class with a constructor. 19Feb10 - fix bvfs that displays NULL from time to time - Add comments about lock priority - Fix make_catalog_backup.pl fails when catalog db is on other host 18Feb10 - Discard prev regress test results - Make set_jcr_sd_job_status static 17Feb10 - Apply MacOSX installer patch from bug #1509 - Add debug code for FreeBSD regress failures - Reduce debug output 16Feb10 - Regress test Branch-5.0 prior to release - Add more debug for three-pool regress failure - Make dup jobs regress test work - Eliminate error message in regress setup if get not present - Avoid error message if git not installed 15Feb10 - Apply fix to previous fix of Copy problem. Fix proposed by reporter of bug #1476 - Set default Allow Duplicate Jobs = yes - Better cancel + fix Allow Dups code - Remove all bacula.spec.in 14Feb10 - Fix duplicate job bug - Fix infinite wait on error when restore started - Make undocking work - Add check for sqlite3_threadsafe() in configure - Add function to extract resource from config file - First cut cd to dir during save and restore - Add debug to testls 13Feb10 - Updates for 5.0.1. - Clean up termcap requirements. - Add dependency information. - Changes to run bat as nonroot user. - Refix version. - Fix client only build. - Add code to check and prevent setting StorageId to zero 12Feb10 - Lets call the Ingres version of the tables also version 12 as it already has all the new tables introduced in version 12 on the other backends. - First cut at fixing AllowDuplicateJobs bugs - Fix bug #1501 -t does not print errors - Add more doc in sample-query.sql 11Feb10 - Apply SQLite3 update fix from bug #1497 - Apply bashism fix for diskchanger.in script from bug #1499 - Apply Philipp Storz fix on bconsole history file - Apply rpm fix for Sci Linux from bug #1494 - Update po files - Take most recent Ukranian po from bug #1448 - Fix pages not in focus 10Feb10 - Work around SQLite3 bug in bat submitted by Andreas Piesk a.piesk@gmx.net - Move shared object numbers into version.h + use -release for libtool rather than -version-info - Make mtx-changer errors clearer - Check for existence of mtx-changer.conf in mtx-changer script 09Feb10 - Probable fix for Copy/Migration bug #1476 - Fix SQL that fails on SQLite3 in bat reported by Andreas Piesk a.piesk@gmx.net - Add "bbatch -r" option to test database performance 08Feb10 - Make bsnprintf test program compile - Add deadlock option to .die command - Rename directory - Reorganize spec files - Fix bat bug that consumes connections + add braces on ifs + rename subroutines - Fix compiling gigaslam.c whith $(CFLAGS) for OpenSuse Build service 01Feb10 - fixed segfault/reworked query execution 07Feb10 - Fix Mysql database upgrade. - Fix bug #1488 -- create delivery_error() subroutine to avoid recursion and race conditions in messages.c - Upgrade cats lib also to 5.1.0 06Feb10 - Fix missing console page in bat - Move msg trace into subroutine - Move bat help files into help subdirectory - Add bat help files to Win64 installer - Win -- add help files to installer + stop any running bacula-fd before install - Fix bug #1481 -- bat consumes all console file descriptors - Update date on win32 rc file 04Feb10 - Fix bug #1486 -- bat doesn't show any errors on command-line 03Feb10 - Correct .my.cnf umask in make_catalog_backup.pl 02Feb10 - Apply Philipp's fix for dbcheck use by make_catalog_backup.pl 01Feb10 - Free db_list when not used - Fix seg fault in bscan from new comment field - Implement new "purge volume action" command to trigg ActionOnPurge. - Disable action_on_purge message in Storage - Change db_get_media_ids() to use more MEDIA_DBR info in search - Remove qmake-qt4 code so tht alternate qt4 build works. Fixes build problems in bug #1468 - Make configure.in changes recommended by Markus Elfring - Patch from checks multple CNs when using TLS 31Jan10 - Commit spec+rpm build files from Scott 30Jan10 - Fix seg fault in SQlite driver 29Jan10 - - fixed the database/table scripts - db_user was missing - updated database schema - fixed missing statements in sql*.h - since there is a db_type for Ingres now, there have to be 5, not 4, members in the arrays - worked alot on myingres.c - queries seems to be working, but the first INSERT fails with a segfault - Remove old bdb files + change DQUEUE to use dlist - Change copyright date - Document the empty query file 28Jan10 - Make versions of shared libs inline with the software version. - Fix ActionOnPurge with a relabel command - Remove file_index sequential check -- reported by Graham - Enhance marking volume Used messages 27Jan10 - Disabled ActionOnPurge waiting for a fix - Check pool memory size for truncate op 26Jan10 - Fix #1467 about ActionOnPurge with Devices having space - Update bacula.spec with tips from Mory Henderson - Add -D option to bconsole to choose between different directors 18Jan10 - Add comment= option to restore and run commands 26Jan10 - Fix #1466 about Bogus pruning message 25Jan10 - Fix make_catalog_backup.pl warning Release version 5.0.3 03Aug10 - Fix Windows build - Remove patches directory - Fix compilation problem with zlib 02Aug10 - Remove comments field from tls-duplicate-job-test -- add back next database upgrade 01Aug10 - Make Win32 no filesystem change more explicit 31Jul10 - Update askdir.c to Branch-5.1 - Revert block.c to fix recycling - More backport from Branch-5.1 to Branch-5.0 - Backport Branch-4.0 release to Branch-5.0 - Massive backport from Branch-5.1 to Branch-5.0 -- a bit more to do 29Jul10 - Remove some old files 28Jul10 - Fix #1606 about OpenSSLv1 detection using non-standard location - Backport some 5.1 changes to 5.0 27Jul10 - Update the license template files 26Jul10 - Fix postgresql catalog creation when version is not on the first line 25Jul10 - More changes from GPLv2 to AGPLv3 - Fix some missed copyright changes - Change license from GPLv2 to AGPLv3 - Define restore object stream 21Jul10 - Fix bug #1610 handle empty xattr values on Linux and xBSD. - Really free free pool memory before sm_dump - Garbage collect memory pool at end of job and before sm_dump - Ignore STREAM_RESTORE_OBJECTS returned by SD to FD 19Jul10 - Add xattr seg fault protection suggested by Marco for bug #1610 17Jul10 - Add archlinux to os.m4 14Jul10 - More fixes for 32/64 bit problems in smartall - Fix 32/64 bit problem in smartalloc dump routine 11Jul10 - Fix bad copy/paste in commit c88dccb88 prably a seg fault - Fix .dump, .die, .exit when DEVELOPER turned off 10Jul10 - Add .dump and .exit commands for daemons 10May10 - Add .dump command 10Jul10 - Make SD automatically fix the Volume size in the Catalog when out of sync - Add bigger print buffer for sm_dump 09Jul10 - Use Pmsg in smartall.c rather than printf for tracing Windows 11Jul10 - Update to master's bsnprintf.c 07Jul10 - Up maximum block size to 20M 04Jul10 - Add new tls-duplicate-job test 07Jul10 - Fix for TLS bugs #1568 and #1599 02Jul10 - Improve comm line error handling for TLS, may fix bug #1568 and #1599 03Jul10 - Remove Linux dependency (seq) in regress script 06May10 - Fix problem when sending Cancel event to plugin 01Jun10 - Update makefiles for new libtool revision - Simplify libtool revision and use VERSION as default - Simplify libtool revision 28May10 - Convert all Jmsg on the watchdog thread to Qmsg 20May10 - Do not use mtime with basejobs 02Jul10 - Fix SD crash due to mismatched lock/unlock in error condition 26Jun10 - Fix bug #1587 if you have clients with different catalogs configured, both catalogs contains all clients after a reload or restart of the dir - Fix bug #1577 During migration: ERROR in block.c:950 Failed ASSERT: dev->is_open() by moving and commenting out the ASSERT() 23Jun10 - Skip HB kill in FD if HB thread terminated 21Jun10 - update windows defs 20Jun10 - Fix crash from unequal volume_lock/unlock calls - Fix pruning for migration jobs and do some optimization - Print TestName at beginning of dump 19Jun10 - Remove prototypes of removed prune queries. 18Jun10 - Adapt new prune code with old db_accurate_get_jobids() 17Jun10 - Remove bdb from configure - update prune code 16Jun10 - Make new prune algo to work with backup 19Jun10 - Save any dumps during regression to dumps directory - Update LICENSE - Fix crash from rw_lock/unlock miss match 18Jun10 - Attempt to fix duplicate job kill seg fault - Replace pthread_kill by my_thread_send_signal() in jcr.c - fix #1595 about batch mode detection problem for postgresql with non standard install dir - Fix accurate code - Add TestName to gdb traceback 17Jun10 - Fix db_get_base_jobid() 14Jun10 - Fix #1594 about prune copy jobs 07Jun10 - Apply literal string fix in printf submitted by Luca Berra 03Jun10 - Fix bug #1582 Restore from multiple storage daemons breaks subsequent backups 01Jun10 - Fix segfault on "cancel jobid=" command - Change libtool version 30May10 - Fix bug #1554 Windows installer doesn't honor /S flag 23Apr10 - Remove pool zap code that breaks 2drive-concurrent-test 28May10 - Fix #1571 and install libraries with 755 perms 27May10 - Fix bug #1581 ASSERTs in src/dird/jobq.c can never trigger 20May10 - Fix problem with BaseJob and Accurate FileSet options on client side 24May10 - Add more debug code for bactrace 23May10 - Fix for bug #1569 deadlock/crash in Dir 03May10 - Fix segfault when loading Plugins 04May10 - Fix #1567 about display of long volume names truncated during restore 02May10 - Added new bacula-libs package. 01May10 - Fix bug #1538 Start Scripts return incorrect value - Fix bug #1564 init scripts not LSB compliant 28Apr10 - Fix File and Job Retention in show pool command Release Version 5.0.2 27Apr10 - Add lmgr_is_locked() function to test if a thread own a mutex - Probable fix for SD crash bug #1553 24Apr10 - Fix #1559 problem when restoring pruned jobs with a regexp - Fix for bug #1560 bcopy cannot find Volume 23Apr10 - Remove comment field added in last patch - Fix cancel crash bug #1551 21Apr10 - Check if sql backend is thread-safe 20Apr10 - Correct Pool display in SD status. Fixes bug #1541 19Apr10 - Fix cancel crash reported by Stephen Thompson 18Apr10 - Rewind on close to fix #1549 16Apr10 - Remove closelog() in bpipe fixes bug #1536 - Fix #1517 about missing Base level in .level command 08Apr10 - fix grant_postgresql_privileges doesn t grant permissions on jobhisto_jobid_seq 07Apr10 - Add lock position info to volume manager - Permits to use lock manager with file/line from outside 03Apr10 - Replace ASSERT in block.c with fail Job - Use uint32_t for max_concurrent_jobs 29Mar10 - Use file and line for rwlock and lmgr in db_lock() - Add File and Line info to rw_lock for lmgr 27Mar10 - Fix database locking calling db_lock and returning from function without calling db_unlock. 26Mar10 - Add missing db_unlock to bvfs_update_cache. 22Mar10 - Fix #1532 about permission on binaries 14Mar10 - Allow users to build bat without static QT if desired. - Fix for qt mkspecs location on Fedora 12. 12Mar10 - Fix #1527 about deadlock during migration 10Mar10 - Another fix for OpenSSLv1 - Add -lrt to Solaris links 09Mar10 - Fix tls.c for OpenSSLv1 08Mar10 - Fix #1511 when trying to insert more than 50.000 directories in bvfs - Fix plugin load not to stop if one plugin bad -- pointed out by James 07Mar10 - Remove --without-qwt from configure statement. - Fix bug in bvfs_update function, should work much better now 06Mar10 - Second correct fix to bug #1524 verify fails after adding or removing files - Fix bug #1524 verify fails after adding or removing files - Fix bug 1523. - Apply fix suggested by Andreas in bug #1502 for mediaview column sort problem - Lets not generate the ingres code automatically when the .sc or .sh files changes as it seems these files get outdated on some systems and then this rule kicks in on systems that don't have the esqlcc ingres compiler installed. - Fix CentOS detection in regression get-os script 05Mar10 - Create subroutines to add exclusion for plugins - This adds sql debugging to these classes that Eric wrote. - This is a 1/2 fix of the issue. It allows for the sorting of the two non graphic columns, but still does not allow for sorting the graphic columns. The issue is with last. By setting the sort value, you are setting the value on the last. To experiment with what I mean, use the set background that I have commented out in this commit. 03Mar10 - Fix OpenSSL 1.x problem in crypto.c on Fedora 12 - Display AllowCompress warning message only if compression used in FileSet 01Mar10 - Added comment on dbi backend needing a recent version of libdbi from CVS as the version currently released 0.8.3 wont work for compiling the code. - Add Warning check to SQL - Fix readline to use TERM_LIB found for conio 27Feb10 - Move bacula shared objects in separate bacula-libs package. - Fix for termcap lib on suse. 26Feb10 - Fix for shared objects name convention change. - Remove mandrive and suse bacula.spec from configure 25Feb10 - Fix compile link flags for gigaslam - Add missing defines for gccver. Release Version 4.0.4 03Sep10 - Send back updated jobs status from FD - Allow plugin to skip restore if problem - Add comments to win32-systemstate-test - Attempt to eliminate waiting on Storage message during restore - Add quotes around resource name in status output - Change FD protocol version to avoid error message when sending RestoreObjects - Fix so .messages does not stop restore in bat (I think) Release Version 4.0.3 31Aug10 - Fix bug #1633 Windows service is not removed if still running 30Aug10 - Make RestoreObject compatible with older FDs - Apply #1624 properly - Use VERSION for libtool library version - Change branding to Bacula Enterprise - Fix #1624 about segfault in dvd driver when calling rewind(NULL) - Add registered trademark 17Aug10 - Correct rpm .spec for putting hostname and password in bat.conf Release Version 4.0.2 12Aug10 - Fix batch insert detection on SLES 11 10Aug10 - Update Enterprise specs to work with 4.0 08Aug10 - Fix bug #1504 -- Error when creating tables in MySQL 5.5 02Aug10 - Allow sorting of MeditView table columns 01Aug10 - Make Win32 no filesystem change message more explicit 27Jul10 - Update the license template files 28Jul10 - Fix #1606 about OpenSSLv1 detection using non-standard location Bug fixes 1504 1606 Release Version 4.0.1 26Jul10 - Fix pending_buf size calculation + malloc in big chunks - Optimize mallocs in vssapi_registry.c - Apply James' restore patch 25Jul10 - More changes from GPLv2 to AGPLv3 - Fix some missed copyright changes - Bring plugin license up to new version 24Jul10 - Apply James' restore patch - Call plugin bEventEndxxxJob even if Job canceled - Check some plugin error conditions on restore to prevent seg fault - Switch to AGPLv3 22Jul10 - Clear class buffer in operator new + add safe_free and correct some calls to use it - Really free free pool memory before sm_dump - Garbage collect memory pool at end of job and before sm_dump - Ignore STREAM_RESTORE_OBJECTS returned by SD to FD - Implement %f %b to get JobFiles, JobBytes in a RunScript - Fix some windows plugin crashes 20Jul10 - Add exclude code + fix a few orphaned buffers 19Jul10 - Fix malloc of wrong size causing buffer overrun on restore with Windows plugins - Fix free of unallocated buffer in win plugin code - Add debug info to smartall.c for buffer overrun - Add xattr seg fault protection suggested by Marco for bug #1610 18Jul10 - Add archlinux to os.m4 - Apply James' job_canceled fix 17Jul10 - Add some of James' comments - Merge with previous KES changes - Apply James' leaks patch - Make VSS snapshot failures fatal - Fix Win FD crash at termination - Orphaned buffer fixes - Fix 64 bit p_CreateVssExamineWriterMetadata entrypoint - Apply James' backup orphaned buffer patch - Modify win32 config to handle James new vss plugin - Fix min compile problem + package vss-fd.dll instead of systemstate - First cut merging James 14Jul10 - More fixes for 32/64 bit problems in smartall - Fix 32/64 bit problem in smartalloc dump routine 13Jul10 - Make plugins ignore new event item - Put all Windows plugin code on non-zero debug level - Add bEventVssBeforeCloseRestore per James 11Jul10 - Fix .dump, .die, .exit when DEVELOPER turned off - First cut systems state plugin cancel + release some of orphaned buffers - Add bigger print buffer for sm_dump - Add .dump and .exit commands for daemons - Use Pmsg in smartall.c rather than printf for tracing Windows 09Jul10 - Add .dump command - Permit using sm_dump in Windows plugins 08Jul10 - Add a make for winbmr directory Bug fixes 1610 Release Version 4.0.0 07Jul10 - Fix for TLS bugs #1568 and #1599 - Add new tls-duplicate-job test - Improve comm line error handling for TLS, may fix bug #1568 and #1599 06Jul10 - Make Windows binaries follow similar naming convention to source release - Correct some of the Win64 compiler warnings - Fix Win32 systemstate crash (hopefully) 03Jul10 - Remove Linux dependency (seq) in regress script 02Jul10 - Do not use mtime with basejobs - Fix SD crash due to mismatched lock/unlock in error condition 29Jun10 - Use send_restore_object() when using plugin 26Jun10 - Fix bug #1587 if you have clients with different catalogs configured, both catalogs contains all clients after a reload or restart of the dir - Fix bug #1577 During migration: ERROR in block.c:950 Failed ASSERT: dev->is_open() by moving and commenting out the ASSERT() Release Version 4.0.0-RC3 19Jun10 - Move some AC_MSG_RESULT macros around so the configure output looks somewhat cleaner. - Save any dumps during regression to dumps directory - Fix crash from rw_lock/unlock miss match - Attempt to fix duplicate job kill seg fault - Replace pthread_kill by my_thread_send_signal() in jcr.c - Add systemstate plugin in windows installer 18Jun10 - Fix postgresql error in grant script - fix #1595 about batch mode detection problem for postgresql with non standard install dir - Fix accurate code 17Jun10 - Fix db_get_base_jobid() 16Jun10 - Fix Solaris zlib link bug reported by Robert Garza - Improve the "update stats" sql command - Improve performance for MySQL with update stats command 14Jun10 - Fix #1594 about prune copy jobs - Fix restore object compression flag -- James 11Jun10 - Add BDB_VERSION for scripts + prepare update 11 to 12 + automate BDB_VERSION checking 07Jun10 - Fix bug #1582 Restore from multiple storage daemons breaks subsequent backups - Fix #1567 about display of long volume names truncated during restore - Fix for bug #1569 deadlock/crash in Dir - Apply literal string fix in printf submitted by Luca Berra 03Jun10 - Fix bug #1582 Restore from multiple storage daemons breaks subsequent backups 01Jun10 - Fix segfault on "cancel jobid=" command 30May10 - Fix bug #1554 Windows installer doesn't honor /S flag 28May10 - Fix #1571 and install libraries with 755 perms 27May10 - Fix bug #1581 ASSERTs in src/dird/jobq.c can never trigger - Fix segfault in action on purge test - Fix problem with BaseJob and Accurate FileSet options on client side 12May10 - Adjusted path handling to make 'where' work. 'where' is basically ignored. a 'regexwhere' that affects plugin paths will probably still break things 11May10 - Don't activate plugin on restore if no RestoreObjects have been seen - Move "Including VSS Writer ..." so it only appears once 10May10 - memory leak fixes - make tocharstring() report line and file correctly for sm_alloc - use free instead of delete to free memory allocated with wcsdup remove DOS EOLs - Free some memory allocated in find_filespec - plugin: Use smartalloc in find_filespec - update find_filespec to allocate it's own memory and not retain any pointers from the caller 08May10 - remove GUID from the writer 'directory' name. Rely on the name of the instance_{GUID} dummy file instead - add some deletes back in now that find_filespec does the expected - Clean some stale code and superfluous debugging output - forgot to mark file as seen when it is seen but not newer - mark instance_{GUID} files as seen for incremental backups - plugin: replace new/delete/malloc/free by smartalloc 07May10 - Remove bdb from cat makefile 06May10 - Fix problem when sending Cancel event to plugin - Update plugin from James - Implement bEventPluginCommand event for systemstate plugin - MySQL compilation fix 05May10 - plugin: use smartalloc - fix compilation for 64bit version Release Version 4.0.0-RC1 04May10 - Fix xml_name in plugin 03May10 - Fix case order in vss_writer to resolve crash at the end of the writer backup - Fix segfault when loading Plugins 01May10 - Fix insertion of RestoreObject - Fix RestoreObject schema on PostgreSQL - Use lwps cmd in dbx and no threads as it seems to give some strange side effects e.g. doesn't work and lwps seems to always work. So lwps it is then. - Do some work on the btraceback on Solaris, we test to see what debugger is available and we prefer the debuggers in this order: dbx, gdb, mdb. Also enchanced the dbx bactrace somewhat that it always dumps all available threads (e.g. we also changed from lwp to threads for dbx). We also print some variables that the gdb script also dumps on a bactrace. Hopefully we get some better dumps using this. The mdb is used as a last resort as it should be always installed on a Solaris box (dbx and gdb may not) but at the moment I'm still trying to find out how to get some more understandable dumps from mdb as its rather rudimentary and more a crash debugger then a source code debugger. - Remove RestoreObjects when pruning Jobs - Fix File and Job Retention in show pool command - Add Polish translation. This translation project is sponsored by Inteos Sp. z o.o. based in Warsaw, PL. - Fix bug #1538 Start Scripts return incorrect value - Fix bug #1564 init scripts not LSB compliant 28Apr10 - Patch from Martin to avoid error when single tape used 27Apr10 - Add lmgr_is_locked() function to test if a thread own a mutex - Add new file I missed from James' plugin patch - Probable fix for SD crash bug #1553 26Apr10 - Fix #1558 about bscan that doesn't update PurgedFiles on Job records - Fix #1559 problem when restoring pruned jobs with a regexp 24Apr10 - Fix for bug #1560 bcopy cannot find Volume - Add BEEF in version.h 23Apr10 - Add compress/decompress of Object Record data - Remove pool zap code that breaks 2drive-concurrent-test - Fix cancel crash bug #1551 21Apr10 - Fix job_metadata name problem - Backport regress from Branch-5.0 and master - Check if sql backend is thread-safe - Update DartConfiguration - Add lock position info to volume manager - Backport lockmgr.h - Backport bbatch.c changes - Add install of mdb script - add mdb traceback + remove cats/bdb - Pull master changes 20Apr10 - Big backport from master - Correct Pool display in SD status. Fixes bug #1541 05Apr10 - Fix compiler warning 03Apr10 - Replace ASSERT in block.c with fail Job - Use uint32_t for max_concurrent_jobs 29Mar10 - Use file and line for rwlock and lmgr in db_lock() - Add File and Line info to rw_lock for lmgr 27Mar10 - Fix database locking calling db_lock and returning from function without calling db_unlock. 26Mar10 - Add missing db_unlock to bvfs_update_cache. - Fix array dimensions due to adding Ingres to certain sql arrays. 22Mar10 - Update configure - Fix #1532 about permission on binaries 14Mar10 - Allow users to build bat without static QT if desired. - Fix for qt mkspecs location on Fedora 12. 12Mar10 - Run ingres template code through esqlcc. - another small fix - syntax fix, test improved, empty results fixed - Fix #1527 about deadlock during migration 10Mar10 - Another fix for OpenSSLv1 - Add -lrt to Solaris links 09Mar10 - Fix tls.c for OpenSSLv1 08Mar10 - Fix #1511 when trying to insert more than 50.000 directories in bvfs - Fix plugin load not to stop if one plugin bad -- pointed out by James 07Mar10 - Remove --without-qwt from configure statement. - Fix bug in bvfs_update function, should work much better now 06Mar10 - Second correct fix to bug #1524 verify fails after adding or removing files - Fix bug #1524 verify fails after adding or removing files - Fix bug 1523. - Apply fix suggested by Andreas in bug #1502 for mediaview column sort problem - Lets not generate the ingres code automatically when the .sc or .sh files changes as it seems these files get outdated on some systems and then this rule kicks in on systems that don't have the esqlcc ingres compiler installed. - Fix CentOS detection in regression get-os script 05Mar10 - Create subroutines to add exclusion for plugins - This adds sql debugging to these classes that Eric wrote. - This is a 1/2 fix of the issue. It allows for the sorting of the two non graphic columns, but still does not allow for sorting the graphic columns. The issue is with last. By setting the sort value, you are setting the value on the last. To experiment with what I mean, use the set background that I have commented out in this commit. 03Mar10 - Fix configure.in - Lets generate ingres code by calling esqlcc and not esqlc as we want c++ code. Replaced some strncpy by bstrncpy calls. Add dependency in Makefile of generated code on it source file. - Fix OpenSSL 1.x problem in crypto.c on Fedora 12 - Display AllowCompress warning message only if compression used in FileSet 01Mar10 - Added comment on dbi backend needing a recent version of libdbi from CVS as the version currently released 0.8.3 wont work for compiling the code. - Add Warning check to SQL - Fix readline to use TERM_LIB found for conio 27Feb10 - Move bacula shared objects in separate bacula-libs package. - Fix for termcap lib on suse. 26Feb10 - Fix for shared objects name convention change. - Remove mandrive and suse bacula.spec from configure 25Feb10 - Fix compile link flags for gigaslam - Add missing defines for gccver. 24Feb10 - Final po changes for Release-5.0.1 - Remove qt-console from POFILES 23Feb10 - Undelete bat help files - Fix problem with MySQL with big Base jobs (temporary fix for 5.0.1) - Fix compiler warnings in tools directory - Ensure SD asks for help when looping even if poll set. Fixes bug #1513 21Feb10 - Fix three-pool regress bug - Replace MIN by code as recommended by Marco to avoid compiler warning - Make script more portable - Add Fedora 11 and 12 build tags. - Lets close the Ingres cursor otherwise the code complains the cursor is still open when we try to reuse it. - Fix segv when indicator field is null. Also added some extra checks around free calls so we don't try to free null pointers. - Changed strcpy to bstrncpy and sprintf to bsnprintf and changed the bsnprintf format. - Small indent changes 20Feb10 - Sync between master and this branch as some ingres changes did go into master but not into this branch. - Remove include file that makes the compile complain and doesn't seem to be used as removing makes the code compile ok. - Some small indent changes. - Reindented myingres.sc to Bacula "style" and regenerated myingres.c - Merged in rejects from previous patch and regenerated new myingres.c from myingres.sc using esqlc. Changed sprintf into snprintf. - Added patch from Stefan Reddig -- fixed date types, errmsg - Added patch from Stefan Reddig -- improved ingres db test - Added patch from Stefan Reddig -- added some checks, db test prog - Forgot one exit. - Fixes for client only build. - Fix seg fault in dup jobs regression test - Possible fix for FreeBSD three-pool regress failure - Remove duplicate. - Remove mysql version variable. - Enable readline support. - bug report 1505 - This version fixes an issue where the console window would start out not docked. It is fixed by initiating the variables in the Pages class with a constructor. 19Feb10 - fix bvfs that displays NULL from time to time 23Feb10 - Ensure SD asks for help when looping even if poll set. Fixes bug #1513 21Feb10 - Fix three-pool regress bug - Replace MIN by code as recommended by Marco to avoid compiler warning - Make script more portable - Add Fedora 11 and 12 build tags. - Lets close the Ingres cursor otherwise the code complains the cursor is still open when we try to reuse it. - Fix segv when indicator field is null. Also added some extra checks around free calls so we don't try to free null pointers. - Changed strcpy to bstrncpy and sprintf to bsnprintf and changed the bsnprintf format. - Small indent changes 20Feb10 - Sync between master and this branch as some ingres changes did go into master but not into this branch. - Remove include file that makes the compile complain and doesn't seem to be used as removing makes the code compile ok. - Some small indent changes. - Reindented myingres.sc to Bacula "style" and regenerated myingres.c - Merged in rejects from previous patch and regenerated new myingres.c from myingres.sc using esqlc. Changed sprintf into snprintf. - Added patch from Stefan Reddig -- fixed date types, errmsg - Added patch from Stefan Reddig -- improved ingres db test - Added patch from Stefan Reddig -- added some checks, db test prog - Forgot one exit. - Fixes for client only build. - Fix seg fault in dup jobs regression test - Possible fix for FreeBSD three-pool regress failure - Remove duplicate. - Remove mysql version variable. - Enable readline support. - bug report 1505 - This version fixes an issue where the console window would start out not docked. It is fixed by initiating the variables in the Pages class with a constructor. 19Feb10 - Fix make_catalog_backup.pl fails when catalog db is on other host 17Feb10 - Apply MacOSX installer patch from bug #1509 - Add debug code for FreeBSD regress failures - Reduce debug output 16Feb10 - Regress test Branch-4.0 prior to release - Add more debug for three-pool regress failure - Backport duplicate-job-test - Make dup jobs regress test work - Eliminate error message in regress setup if get not present - Avoid error message if git not installed 15Feb10 - Apply fix to previous fix of Copy problem. Fix proposed by reporter o #1476 - Set default Allow Duplicate Jobs = yes - Fix Allow Duplicates bug 14Feb10 - Fix duplicate job bug - Update date - Fix infinite wait on error when restore started - Make undocking work - update configure - Add check for sqlite3_threadsafe() in configure - Add debug to testls 13Feb10 - Updates for 5.0.1. - Clean up termcap requirements. - Add dependency information. - Changes to run bat as nonroot user. - Refix version. - Fix client only build. - Add code to check and prevent setting StorageId to zero 12Feb10 - Lets call the Ingres version of the tables also version 12 as it alre all the new tables introduced in version 12 on the other backends. - Fix library versions from 5.1.0 to 4.0.1 so things are inline with th numbering scheme - First cut at fixing AllowDuplicateJobs bugs - Fix bug #1501 -t does not print errors - Add more doc in sample-query.sql 12Feb10 - Lets call the Ingres version of the tables also version 12 as it alre all the new tables introduced in version 12 on the other backends. - Fix library versions from 5.1.0 to 5.0.1 so things are inline with th numbering scheme - First cut at fixing AllowDuplicateJobs bugs - Fix bug #1501 -t does not print errors - Add more doc in sample-query.sql 11Feb10 - Apply SQLite3 update fix from bug #1497 - Apply bashism fix for diskchanger.in script from bug #1499 - Apply Philipp Storz fix on bconsole history file - Apply rpm fix for Sci Linux from bug #1494 - Update po files - Take most recent Ukranian po from bug #1448 - Fix pages not in focus 10Feb10 - Work around SQLite3 bug in bat submitted by Andreas Piesk a.piesk@gmx - Move shared object numbers into version.h + use -release for libtool than -version-info - Make mtx-changer errors clearer - Check for existence of mtx-changer.conf in mtx-changer script 09Feb10 - Probable fix for Copy/Migration bug #1476 - Fix SQL that fails on SQLite3 in bat reported by Andreas Piesk a.pies - Make master run with DEVELOPER set 08Feb10 - Make bsnprintf test program compile - Rename directory - Reorganize spec files - Fix bat bug that consumes connections + add braces on ifs + rename su - Fix compiling gigaslam.c whith $(CFLAGS) for OpenSuse Build service - Fix Mysql database upgrade. 07Feb10 - Fix bug #1488 -- create delivery_error() subroutine to avoid recursio race conditions in messages.c - Upgrade cats library also to 5.0.0 06Feb10 - Fix missing console page in bat - Move msg trace into subroutine - Move bat help files into help subdirectory - Add bat help files to Win64 installer - Win -- add help files to installer + stop any running bacula-fd befor install - Fix bug #1481 -- bat consumes all console file descriptors - Update date on win32 rc file 04Feb10 - Backport truncate on purge from 5.1.x - Fix bug #1486 -- bat doesn't show any errors on command-line - Update the bsock error url 03Feb10 - Correct .my.cnf umask in make_catalog_backup.pl 02Feb10 - Apply Philipp's fix for dbcheck use by make_catalog_backup.pl 01Feb10 - Backout patch that should not be in Branch-5.0 - Backup patch that should not be in Branch-5.0 - Free db_list when not used - Fix seg fault in bscan from new comment field - Remove qmake-qt4 code so tht alternate qt4 build works. Fixes build p in bug #1468 - Patch from checks multple CNs when using TLS 31Jan10 - Commit spec+rpm build files from Scott 30Jan10 - Fix seg fault in SQlite driver 28Jan10 - Make versions of shared libs inline with the software version. - Remove file_index sequential check -- reported by Graham 27Jan10 - Disabled ActionOnPurge waiting for a fix - Check pool memory size for truncate op 26Jan10 - Fix #1467 about ActionOnPurge with Devices having space - Fix #1466 about Bogus pruning message 25Jan10 - update configure - Fix make_catalog_backup.pl warning Release Version 5.0.0 21Jan10 - Remove double secs in pruning output 20Jan10 - Fix priority mgnt in lock manager - Fix FD crash when plugin running and cancel given - Stop backup sooner after cancel - Make a missing plugin during backup fatal - Update sample-query.sql - Use make_catalog_backup.pl by default 19Jan10 - Update makeall and add README to release directory - Remove debug code - Add more authors - Fix possible memory leak - Fix bscan bug introduced with serialization change - Add a few status client commands - Make Ukraine po to compile - Update po files - More spec improvements from bug #1455 - Enhance FD status to have level 18Jan10 - Fix logwatch install in bacula.spec. Patch from bug #1454 - Remove /etc/logwatch directories from spec file. Patch supplied by bug #1456 - Don't remove spec files -- fixes bug #1458 - Remove FI sanity check code that does not apply after a VirtualFull - Make Attr/record FI non-fatal if different -- possibly temp + add new session record types - Keep serial from overruning with bad data 17Jan10 - Add info message on how to stop the file relocation test 15Jan10 - Add new Path tables to grant and drop scripts - Fix #1450 about FirstWritten not updated with bscan - Fix error message in grant_postgresql_privileges 12Jan10 - Fix SQLite table creation script 11Jan10 - Add Job.Reviewed field - Enable priority checks in lockmanager - Change DB version from 11 to 12 - Fix Win64 build - Fix Win32 build 10Jan10 - Fix the subject to something easy to delete - Turn off messages test -- it creates tons of emails 09Jan10 - Optimize strtok usage in ua_cmds 08Jan10 - Remove old code requiring different storages for migration - More checking for OpenSSL in configure 06Jan10 - Add make_catalog_backup.pl script that uses env variables and disk file to pass database password for backup - Modify the sql query to get alphabetical order of clients when selecting the most recent backup for a client 05Jan10 - Remove warning about make_catalog_backup.pl 04Jan10 - Add Ingres configuration - Fix Ingres ID definition that caused seg fault - Add commit from Stefan Reddig 03Jan10 - Simplify initgroups definition for AIX - initgroups definition is ok on aix >= 5 31Dec09 - Ignore scripts/bacula_config - Remove QWT from configure -- not used 28Dec09 - Revert to configure with C due to old prototypes on some systems - Make ioctl_req_t test less g++ dependent - Make ioctl test more exact - Try to force configure compiles to be more exact - Rebuild configure to handle Marco's changes - Clean old configure 27Dec09 - Let --enable-libtool and --disable-libtool determine if we build plugins and drop the extra configure option 26Dec09 - Lets use a xattr specific constant and not the stdio BUFSIZ which is kind of platform dependend. - Attempt to autoconfigure ioctl_req_t - Lets not mix initialized stack variable with uninitialized ones in the same definition. - Added some handling of EPERM and EOPNOTSUPP which seem to be returned when you try to retrieve the system extended attributes a non root user. - Lets not orphan the buffer returned by extattr_namespace_to_string as it seems by looking at the code it strdups the string it returns so no need to bstrdup it ourself. 25Dec09 - Show that plugins are enabled or not in configure output. 24Dec09 - Plugins are dependable on libtool now so cleaned the Makefiles and the fd plugins are only build when --enable-plugins is set and libtool is used. - Clarify catalog grant permissions message 23Dec09 - Fix depend for changes to SRC variables. - Drop the usage of macros within macros as it seems some platforms native makes don't support that. While converting the Makefiles also made things somewhat more uniform in naming the lib objects. 22Dec09 - Add scripts/bacula_config script that displays configure options and results - Continue to support Batch Mode with PostgreSQL < 8.2 21Dec09 - M_ABORT Bacula If batch insert is turned on when we try to open a connection and thread safe is not enabled - Try to fix problem on FreeBSD with unsupported extended attributes which gives lots of orphaned buffers as seen in regression testing. 20Dec09 - Fix thread safe detection in ./configure 19Dec09 - Update bweb deb - Fix breload make_catalog_backup.pl rights 17Dec09 - LSBize Debian init scripts 15Dec09 - Fix #undef of lock manager 13Dec09 - Remove checkout master - Add more debug for Solaris regression timeouts - Make SUN C++ compiler stop complaining about enum definition. - Use %c and %n in bootstrap in default bacula-dir.conf 11Dec09 - remove a ref to sqlite - Remove ua_prune.c debug code - Print any traceback or bactrace - Fix old stuff in Makefile - Allow deadlock manager on FreeBSD, MacOSX and SunOs - Add allowcompress-test - Add test for AllowCompress option 10Dec09 - Eliminate compiler warning - Rework Mac OS 10.6 mtio.h fix - Attempt to fix mtio.h problem on Mac 10.6 - Allow mount to wake job waiting for op - Make wait longer for better recycling - Fix another volume_lock dlock order problem - Fix and add ASSERT debug - Fix compilation problem with lockmgr 09Dec09 - Fix misnamed variable - Reorder lock_volumes and dlock in SD to avoid race conditions - - five more updates to manpages options I had forgotten in a corner, - a reformated and edited page for bsmtp - a brand new one for btraceback, based on the Problem Resolution Guide and discussions (to be continued?) on this list. - Fix compilation pb - Add mutex some priority info for SD - Add info in dump about lock priority - Fix CentOS/RHEL detection - Fix #defines when lock manager turned off - Add USE_LOCKMGR_PRIORITY switch to enable new priority management - Add Macro BTHREAD_MUTEX_PRIORITY(p) and lib/mutex_list.h to manage locks - Make pthread_mutex_init/destroy compatible with bthread_mutex_t - Fix SD Vol+dev lock race bug 08Dec09 - Add init/destroy function for both p/bthread_mutex_t object - Add new bthread_mutex_t object that check mutex priority order - Add test for reload command - More bstrncat doc - Add bstrncat comments - Fix bug #1431 about bad reload command. Still an object to free in this case. - Fix bug in bstrncat - Temp fix for prune crash 07Dec09 - Update win32 testing - Add new test for win32 - Add cleandir option - Add tool to edit configuration file remotely - Add more sm_check debug - Add memory corruption checks 06Dec09 - Fix CentOS/RedHat test in regress - Add win32 regress helper - Attempt to fix SQLite seg fault when listing fields - Allow Dir to come up before use - Fix python plugin to use the new get functions instead of the get_ functions. - Fix seg fault in new AllowCompression code - Use restore count from write_bsr - Add some doc of Win32 stuff - Update prototype.conf to have latest stuff - Update techdoc + notes - Add AllowCompression feature 05Dec09 - Remove debug - Fix #1403 about windows directory attributes not well restored - Change old get_Jobxxx to getJobxxx - Fix Win32 build after adding Base Job code - Fix backup-bacula-test - Add new idea to kernstodo - Improved database warning message 04Dec09 - Init lmgr in btape 03Dec09 - Disable SQLite2 code in cats.h - Remove SQLite from configure - Remove SQLite2 scripts - Fix configure.in 02Dec09 - Remove JobMedia.Copy references - bvfs: update bvfs_test - update - Remove brestore_ from bvfs table, use Job::HasCache instead of knownjobid table - Update po files - Finally... the 100% of bacula spanish !!! ;-) - Apply Postgres 8.4 SQL_ASCII fix - Ignore bweb.conf in gui/bweb - Apply manpage patches 01Dec09 - Fix backup-bacula regression - Remove support for SQLite 2 - Fix rpm spec files bug #1428 + #1420 - Fix include MySQL libs to use shared object. Fixes bug #1427 - Fix search to include 64 bit libs for --with-dbi option - Change all log.d to logwatch in RedHat specs 30Nov09 - Add config doc in INSTALL 23Nov09 - Add another project to the projects file - don't follow packagemaker permission recommendations - OSX Installer: update README - OSX installer: fix for a bug in 10.5 packagemaker, --id argument required - OSX installer: switch to new pmdoc packagemaker format - Add another project to the projects file - Add new project 22Nov09 - Add error count to Fatal job errors 21Nov09 - Attempt to keep tls_shutdown from hanging 16Nov09 - Add completion for unmark 15Nov09 - Add Job and File Retention to Pool - Remove version id - Change some console.c socket calls into class calls - Revert "Reduce diff output in weird-files-test" - Reduce diff output in weird-files-test 14Nov09 - Fix bug #1367 by creating an empty query.sql file 13Nov09 - update - Display only backups when running a new job - Add list_backup, list_restore functions - update - Add optional type= argument to .jobs command. You can list only Backup, Restore,... jobs. 12Nov09 - autocomplete restore mode 11Nov09 - update - Fix segfault on basejob code - Replace POOL_MEM by POOLMEM to avoid segfaults - Fix base-job-test with Mysql - Remove extra _ of _dbg_print_db func - Update BDATE - fix segfault on redhat4 10Nov09 - Add base-job-test to regress - update 09Nov09 - Optimize SQL to determine file selection with directories. It is enabled for ascii path. 07Nov09 - Drop svn Id 06Nov09 - Add Solaris regress comments 05Nov09 - More debug when test fails - Add SITE_NAME and EMAIL to cdash report - Display a message if catalog max_connections setting is too low 04Nov09 - Apply James' conio patches - Update po - A small changes on bacula-es translate. Now, we go on ~90% !!! - Fix double send of attributes introduced in 84aabba7cee82f0c1f6dae8882a2ee0bb26306ca - Check pthread_mutex_lock return code in lockmgr 03Nov09 - Remove debug code in concurrent-jobs-test - Remove debug code in encrypt-bug-test - Remove annoying debug messages in four-jobs-test 02Nov09 - Increase width of ls size. Fixes bug #1409 - Fix buffer clobber when editing SQL error - Fix false zombie errors in FD during regression - Merge branches 'master' and 'kaboom' - Add -m option to DIR,FD,SD to dump kaboom output - avoid orphan memory in testls 01Nov09 - tab-completion ok - When using .help item=, we display only usage part - Add bat to Win32 build and install - Add more debug for zombie jobs - Get regress bacula stop messages when debug on - Fix SD DCR race condition that causes seg faults - Stop regression tests after 30 minutes - Commit configure - Add more debug on failed source-addr regression - Set use_libtool expicitly to yes so our other checks work for static tools. 30Oct09 - Rework bat so that Win32 version works better 29Oct09 - Make bat win32 build use /home/kern/bacula - Make non-win32 build stop on failure - Make win32/64 build stop on failure - Remove definition of unused subroutine in ua_dotcmds.c - Revert James' patch to simplify the Win32/64 build process 28Oct09 - disable debug in win32 revision - update bat on win32 project file 27Oct09 - Small fix to Eric great patch for readline commandcompletion so it also compiles on non gcc compilers. - Add readline completion for commands and argument 26Oct09 - Fix another messages error problem pointed out by Eric 25Oct09 - Disable messages-test in automatic - Show an other deadlock in messages.c - Change W/G to Wanted/Granted in lock dump - fix multi-console problem for bat on win32 - change Jmsg to Qmsg in low level routine - Set tries to 1 for a non-timeout mount or unmount operation. - Fix comment - bat: change info order in Job view - Use Qmsg instead of Jmsg when fides_mutex is locked in close_msg() - simplify the link process for win32/win64 24Oct09 - initialize lmgr in bat - add messages-test to regression suite - update tools with lmgr - force lock manger init - add lmgr to bconsole - Fix deadlock detection to work in daemon mode - Implement syslog on Windows - Make all ABORT and ERROR_EXIT msgs go to syslog - Fix ref to dequeuing_msgs 23Oct09 - Disallow Qmsg when despooling - Fix Qmsg race condition reported by Eric - add test for bad messages ressource - bat: Display a nice graphic on media usage depending on the average size for this mediatype. 22Oct09 - bat: add volume capacity estimation in mediaview - bat: try to center InChanger bullet - bat: Use green/red bullet for InChanger in mediview - bat: Don't set Expire field unless LastWritten is ok 21Oct09 - Make new configure per Marco's request - bat: add new Expired button in MediaView - fix vtape test - Redirect errors to /dev/null and only run uname -p on Linux where we know it works. This is probably the most portable way of doing things. 20Oct09 - Add MediaView form that displays the Media list in a QTableWidget. It permits to search and sort media. Rename current "Media" tab to "Pool" as it displays Pools - Permit to use MediaId or VolumeName in MediaEdit panel - add StringList to handle locations, volstatus and mediatypes - add dot functions to list volstatus, locations and mediatypes - update bacula32.def - Add .volstatus command - Add new MediaView - permits "update slot(s)" and "label barcodes slot(s)" command 19Oct09 - Don't use uname -i but uname -p - Added support for selecting the correct libdir on Linux - fix status slots command when SD slots are mixed - Test only master now 18Oct09 - update fr.po - Added acl and xattr regression tests for FreeBSD - Use getfattr and setfattr on Linux not attr as that is a XFS tool which works too but is not native. - Don't enable SUN compiler by default and make the configdir configurable. - Add test when ActionOnPurge=None Add test for update volume=xxx actiononpurge=yyy - fix crash on exchange restore fail - Update project 5 (ActionOnPurge) with current status - chmod new regress script - update regress 17Oct09 - Ensure that Ubuntu /var/run is created in init.d scripts suggested by nick - Implement Dan's suggestion to avoid IPv6 problems - Add makeall for release - On release, make only a simple tag - Fix Windows build 16Oct09 - Don't download and build fakeroot as part of make -C platforms/osx - More Win installer changes - Update installer - Do some additional checks. - Add Marco's run regression wrapper script - Possible fix for problem with Volume in another drive - Make new configure from Marco's configure.in - Try to unmount by running the unmount command specified in the config on file and dvd devices. - Fix switching read device reported by Nicolae Mihalache 15Oct09 - Lets free the variable in the right part of the loop. - Use bfree_and_null - Change bsnprintf to normal strncpy - Add comments to fileregexp test - Add more debug in filregexp test - Eliminate compiler warning - Fix bug #1391 Job status improperly set due to subtle variable overload problem 14Oct09 - Add release scripts - add regress variables to functions.pm 13Oct09 - Update date - Fix stupid error - Avoid error when git-version doesn't exist - Convert some old %x into %p for pointers - Fix #1352 about double free with regexp and big filenames on windows 11Oct09 - Small update to cache the current attrspace we are saving and make a private copy of that string representation. - Change acl and xattr errors from Qmsg to Jmsg - Add comment - Recursively call fix_device_block_write_error on error - Fix changing read device during VirtualFull in SD - Eliminate possible false error message - Fixed ifdefs 10Oct09 - Add posix acls stored in xattrs on FreeBSD - Removed last direct message output by replacing Qmsg by Mmsg 09Oct09 - Add comment on OpenBSD not supporting the extattr functions (anymore ?) - Add new Feature Requests to projects file - Fix ifdefs - Change strcmp to bstrcmp - fix bash/sh problem in disk-changer.in - Fix some comments - remove old db_get_int_handler() - Add support when extattr_get_file is supported but extattr_get_link is not. - Regenerated config.h.in 08Oct09 - Implement transfer and listall command in mtx-changer and disk-changer scripts - Add new autochanger command to get all information about content 07Oct09 - As things are no longer as generic rename the generic to the linux interface (b.t.w. OSX also implements this interface) - Just as with serializing first unserialize all xattr structures in memory and then walk that list for restoring them. - delete the alist in the destroy function - Implement the extattr xBSD interface Moved some code around to be able to reuse the encoding and decoding for both the extattr and xattr interface Use an alist for storing the xattr list so we don't have to count the number of xattr first - Use extattr interface for all xBSD filesystems. Added OpenBSD also to the mix. - As it seems FreeBSD doesn't have the llistxattr or listxattr interface as Linux, OSX and NetBSD have but has an interface named extattr. This is a first breakdown to implement that interface. 05Oct09 - Make Checksum as default when not using FileSet->Include->Options->BaseJob - Change debug level - Fix postgresql MD5 missing field - Fix unwanted printout in strip test - Fix concurrent Job recycle bug #1288 - Fixed inverted logic - Remove useless ScratchPool refs from Bat media list 03Oct09 - Little fixes for the action_on_purge command - Remove obsolete truncate_on_purge settings - Implement action_on_purge command - Implement the ActionOnPurge setting for pools and individual volumes - Implement truncate on purge setting - Add a MaxVolBytes test that create over 100 Vols - Add some error messages in insane buffer size cases - Fix bug #1382 newly created disk volumes -> file not found warning 01Oct09 - Cause the tree widget selected to keep up with the tab widget selected 30Sep09 - Send checksum only when the FD will use it - remove debug - Allow for external CFLAGS to overwrite the CFLAGS in this script. 29Sep09 - Change grep -e to egrep and use -c instead of using wc. - Implement console 'timeout' feature using bacula socket timers - revert the update_bacula_table script change with bad indexes - Add index modification in update_sqlite/sqlite3/postgresql scripts - Remove the inx4 index for SQLite2/3 (FilenameId, PathId) on File table. Replace it by an index over (JobId, PathId, FilenameId). 28Sep09 - Attempt to fix MySQL SQL error 27Sep09 - Make sure we use the right chmod for Solaris - Fix Win32 build - Fix compiler warning 26Sep09 - Remove gnome-console - Update man pages - Implement store_size32 and store_size64 - Correct regression tests to use Pool 'File' 25Sep09 - Up max vol size - Define File Pool and limit size to 5G - Fix Alpha ifdefing -- should fix bug #1359 22Sep09 - Remove the file_fp_idx index for Postgresql (FilenameId, PathId) on File table. It is useless for common usage, and causes performance issues. This index fragments over the time and the update cost grows very quickly. (This index is not present on Mysql schema) 21Sep09 - update speed-test - update speedtest - speed-test: small fix 20Sep09 - Update to slightly newer config.guess and config.sub - Fix compile error on Mac - Generate new configure - Reorder configure test for cleaner print output 19Sep09 - Implement support of keeping readall capabilities after UID/GID switch 18Sep09 - Remove redundant includes of pwd.h and grp.h headers - find_one_file: Remove unreliable and redundant access(2) directory check - Fix link rules - Force nightly-disk regress to 3.0.3 17Sep09 - speed-test: small fix - speed-test: Add basejob argument to test basejob speed - Add new test - Fix conf to use make as requested by Martin Simmons a long time ago - Restore comments - Fix for sqlite, now it works - Fix seg fault in ignoredir code - more mkdir -p changes - small fix - Restrict Join using JobTDate to a selection of JobIds - Fix for sqlite - Make several dir names unique to avoid test collisions - Fix and document new queries - Use new query for Mysql and Sqlite for basejob + accurate - update sql query for basefile+accurate - Change regression scripts to use mkdir -p to avoid spurious errors - Fix some job-start changes - more job-restart code 16Sep09 - Fix sql query for mysql - Fix sql query - Fix sqlite3 syntax - fix sql - update db_get_file_list() to use StartTime instead of FileIndex 15Sep09 - Update restore menu 12 explanation 12Sep09 - Try to distinguish CentOS/RHEL 11Sep09 - Modify tools to be able to correctly install testls for regress - Create bigendian() inline to simplify code - Set Volume Poll Interval to 5 mins by default - Apply Frank's slash patch 10Sep09 - Reduce runscript wait times - Update Win32 README.mingw - Add patch for more SD info fix - Add patch for bug #1371 - Fix seg fault in SD bug #1371 - Add append log to tape SD tests - Add more info when SD connection refused - Fix possible termination problem 09Sep09 - Keep valgrind happy - Fix Exclude Dir Containing ignored when scanning the top_level dir - Update the new exclude-dir-test with multiple Include {} section and different Exclude Dir Contain directive. - Add patch for #1370 - Fix #1370 about the implementation of the "Exclude Dir Containing" option on FD. - Add new exclude-dir-test - Add patch for 3.0.2 release - Fix #1369 about segfault when using ExcludeDirContaining before defining Options{} block. - Verify if the Exclude Dir Containing directive does his job - Add a regress script for Exclude Dir Containing option 08Sep09 - Remove bigendian check from autoconfig system - check endianness at runtime in md5.c - Fix minor issues in the osx installer package builder. - Fix -p/-P in bscan.8 man page 07Sep09 - fix compilation warning - Make output of new commands .lsdir/.lsfile more usable. Fix Bvfs with new db_list object - Fix header defines - Remove some #ifdef-ed code and make it just as the acl and xattr code use a const bool to enable the code. - Redone comments - Move restore struct defintions to seperate include file. Small change to acl.h and xattr.h to use define inline with other header files. - Move finderinfo restore into seperate function so we can use cleaner coding in the restore loop. - Loose #ifdef and use const bool wrapper for some cleaner coding. - Added support for acl and xattr regression test on Solaris - Apply Marco's git format-patch patches for bugs #1365 and #1366 - This patch should fix bug #1366 - This patch should fix bug #1365 06Sep09 - Commit Mac pathlen patch - Increment minor version to avoid future conflict - Fix bug #1368. Increase default path/file length to 2048 05Sep09 - Add acl script code for Mac - Up timeout for rewind and changer on btest script - Try to fix zombies in next-vol-test 04Sep09 - Fix broken editing code - Use edit routine instead of %f for rates - Implement BlockChecksum in Device - btape: Add speed command and test drive speed with Bacula blocks 03Sep09 - btape: Add speed command - btape: Add speed information on qfill and raw command - Commit patch for: Fix bug #1355 Director crashes with double free in Accurate SQL query - Include file,blk in btape fill output - Create exit_code for fill with multiple tapes - Fix #1364 and #1363 about compression buffer error. 02Sep09 - fix variable name - Work on certification scripts - Eliminate DDS-4 in favor of tape + create btape-test-changer test 01Sep09 - Many debug code fixes in regression scripts - Attempt to fix SQLite3 seg fault in list routines - Merge master with SF - Update tape tests for hardware certification - Rename .lsdirs/.lsfiles/.update to .bvfs_xxx to avoid confusion with future commands - Update tape tests for hardware certification - Eliminate xattr.c compiler warning 31Aug09 - Prohibit copy and assignment in db_list_ctx - Use new db_list_ctx class instead of bad POOLMEM* - Exclude OSX resource forks from saving using the xattr code Exclude OSX acl data from saving using the xattr code when normal acl mode is also enabled. Make excluding certain xattr in the generic functions somewhat easier for certain OS specific attributes. - Fix Win32/64 build 30Aug09 - Remove old subroutine prototype - prohibe copy and assignment in Bvfs module - Fix bug #1355 Director crashes with double free in Accurate SQL query 29Aug09 - Fix bug #1357 Verify jobs fail when job has zero files - Rework verify-voltocat-test and add to normal tests 26Aug09 - Release orphanned buffers in accurate code - Fix possible seg fault in db_get_int_handler in accurate code - Update JobBytes only for Verify jobs when computing checksum - Add BaseJob option to fileset 25Aug09 - Suppress some error messages generated after cancelling a job 24Aug09 - Apply and commit Lorenz Schori patch for OSX - Apply Lorenz' OSX patch - update basejob code to use checksum during accurate check - Close bug #1351 SQLite2 to SQLite3 conversion - Remove unnecessary subroutine import definition 23Aug09 - Test of git commit. - bat: fix variable name - bat: Simplify the code to make TableWidget in read-only - Free Volume in several places. Fixes virtual-changer problem and possibly bug #1346. - Add SD Volume debug code 22Aug09 - Don't print different filesystem. Will not descend message if directory explicitly excluded - capitalize bytes in message 21Aug09 - Prune a few dev tests - Made shorter developers test - Rework the bsock.h class to put public structures last - Update AUTHORS file - Integrate patch for building dmg on OSX from Lorenz Schori - Add commas in num files for estimate command 20Aug09 - in status slots command, unlock db just after sql query 19Aug09 - Add BWEBCONF env variable to specify the bweb.conf path without touching the Bweb.pm file with lighttpd - Fix bat crash due to alignment diff in bat and core code - Fix acl-xattr-test by using attr - Add BWEBCONF env variable to specify the bweb.conf path without touching the Bweb.pm file with lighttpd - Ensure that timestamp put in SQL log 15Aug09 - prevent status page from requesting status before it has been brought to the front - Move global acquire lock to lock by device - Restrict acquire to one job at a time - Fix acquire.c locking - Try to fix acquire not to block during despooling - Add fullname parameter to btime in order to debug regress script. - No need to flush the members of the xattr link cache as they are not dynamically created. Small oversight from my side, was thinking I had a memory leak. - fix couple of segfault in acl/xattr code - Eliminate git pull in config_dart - Some small fixes to the counting and some small relayout of small code sniplets. - Lets first output statistics before freeing them. Saves a rather stupid segmentation fault. - Fix merge conflict leftover - Add all acl and xattr related variables which are either global or already part of the JCR into a simple structure and reference that from the JCR structure. 14Aug09 - Some small fixes to the counting and some small relayout of small code sniplets. - Lets first output statistics before freeing them. Saves a rather stupid segmentation fault. - Ignore regress time.out file - Fix merge conflict leftover - Add all acl and xattr related variables which are either global or already part of the JCR into a simple structure and reference that from the JCR structure. - fix compilation problem reported by Dan - Correct spelling of writing -- reported by Dan - Loose void pointer and use C++ supported declaration elsewhere defined structure. - Move global variables into jcr private xattr data structure so we can have parallel saves of xattr on solaris. 13Aug09 - update lock manager to get better traces - Fix files wiped out by merge - Missed commiting one file last time - bat: Add a re-run button on job info page, that allows to run the selected job with the same properties (level, pool, etc...) - bat: small fix on hrule - fix missing copyright 12Aug09 - Make new big-virtual-changer test. Test concurrency - fix offset in new lsdirs/lsfiles command - add comments and list special dirs in .lsdirs - Add .lsfiles, .lsdirs, .update command to interface user with bvfs object - More comments - Update virtual regress comments - bat: fix sql with volreadtime volwritetime bat: add drive=0 in update slots command - bat: Put the content panel as a child of the Storage item bat: use slot selection in update slots command and in label command 11Aug09 - bat: fix volreadtime/volwritetime and messages in stderr about unknown slots - Change backup-acl to acl-xattr-test and make it skip if acl/xattr not installed - Use tmp instead of /tmp + fix strip-test so diff works - Make regexwhere use tmp rather than /tmp - Remove non-portable i option on sed + create tmp dir - connect button callback - display content on doubleclick only if storage and autochanger - bat: Make new autochanger content working 10Aug09 - bat: display a Warning icon when having Errors>0 and Status=T - Pull Philipp Storz' bacula.spec changes for OpenSuSE build service - try to make content table work!! - Implement MaximumConcurrentJobs for SD devices - try to insert data on table content - update content interface 09Aug09 - continue storage content panel - Fix bug #1344 show pool displayed wrong variable for maxvolbytes - Fix compiler warnings in acl and xattr code - Fix screw up with setting JobLevel and JobType - Change version - Fixed references to xattr_link_cache_entry to use xattr_link_cache_entry_t - Changes due to code review by Kern added. - Move enum from protos.h to filed.h and move defines to top of filed.h - Added some more ENOENT supressing. - Small indent change - Small change to comments - Added comment on entry points - Added missing ENOENT switch case. - Fix problem with counting xattr and returning a non-ok on count 0, also added some extra comment and make sure the xattr_value_list is initialized to NULL and checked on bail_out. - Loose default_stream parameter. - Changed snprintf to bsnprintf - Use bstrncpy instead of strncpy - Fixed Jmsg4 to Mmsg4 - Added support for counting xattr errors and only print a limited set of errors but count all. The lower level functions now store there error message in jcr->errmsg so the upper level routines have access to them. - Added support for counting acl errors and only print a limited set of errors but count all. The lower level functions now store there error message in jcr->errmsg so the upper level routines have access to them. - Small changes to ifdef layout. - Drop unneeded target for libbacfind.a - Moved the berrno as a local variable of the function and not a local context variable. Same as previous change for acl.c - Make sure it compiles and moved the berrno as a local variable of the function and not a local context variable. Moved tri-state enum to protos.h - Moved list of supported xattr to start of per OS implementation like in acl.c - Imported patch from older git tree. - bat: init storage content view 08Aug09 - Fix cats.h date - bat: display a Warning symbole when having Errors>0 and Status=T - Add data end tracking an attribute spooling - Fix compiler warning in bvfs code - Use 64 bit ftell and fseek in send_bootstrap_file - Turn of some debug code - Ignore src/tools/bvfs_test 07Aug09 - bvfs: Add example to list files versions bvfs: Fix directory listing bvfs: Add limit/offset implementation to save resources on director bvfs: Create cache tables on the fly when using Bvfs object (for testing) - Bvfs: Create cache tables when updating the cache if they don't exist 06Aug09 - fix makefile for bvfs_test - add option to truncate cache table during startup for bvfs_test - add user handler to print directory add -j, -p to bvfs_test tool - Document FT_DELETED FileIndex=0 special value in database Schema - Add the rest of files for new Bvfs - Add a new Bvfs class that implements brestore instant navigation cache inside Bacula. Works for Mysql, Postgresql and Sqlite3 - bat: fix compiler warning for unreferenced argument - fix mysql case problem in bweb/bresto - Use the sqlite3_changes to implement sql_affected_rows() - remove QFormLayout, and use QGridLayout instead 05Aug09 - in bweb, fix warning - add a default bconsole command to bweb starthttp script. 04Aug09 - remove Page Selector keyword from main bat screen - fix small pb in bweb starthttp script - document bweb+lighttpd - update display_log to display a message if no logs are found - Apply patch for regress from Frank Sweester - connect button from mediainfo to real actions - bat fill mediainfo fields - bat: Go to the media info panel when double-click on job page or media list 03Aug09 - Add new mediainfo panel to bat - update windows bat.pro - small fix for bresto - update doc - don't reset bstat, rstat, dstat in stop_bacula - add test for list basefiles and new list files - don't reset bstat, rstat, dstat in stop_bacula - add list basefiles command make list files compatible with basefiles - fix the basefile catalog update - work on stats, fix bug with batch connection - enable FileSet { Options { accurate = 'pm5' } } - add variables for stats - display a message with basejobids - stop copy/migration using basejobs - replace free&NULL by free_and_null - fix - display base jobs during restore - fix segfault - check size also replace mtime/ctime by lstat field - check for purge job - purge basefiles at the same time than files - make regression ok - use batch connection - fix update_job_end - update HasBase in catalog - remove some debug - seems to work:!!! - make base backup work - update - init base file - compile - fix sql for postgresql - make sql part - take ideas from previous try - Remove useless title - fix layout, now ok - remove list volume menu from joblist - make double click work with joblist - add refresh and delete event - fix script name 02Aug09 - Remove old sqlite3 build from bacula.spec - Move bat from bacula.spec to bacula-bat.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Move bat from bacula.spec to bacula-bat.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Move bat from bacula.spec to bacula-bat.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Move bat from bacula.spec to bacula-bat.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Move bat from bacula.spec to bacula-bat.spec - Remove installing gconsole start script from Makefile.in - Split mtx into its own spec file - Move bat and mtx to their own spec files - Remove docs from spec - Split docs into bacula-docs.spec - Move bat and mtx to their own spec files - found a bug. Joblist page would not come up unless dockPage was called when page was opened with initial paramaters. 01Aug09 - Remove docs from spec - Split docs into bacula-docs.spec - Add bacula-docs.spec.in - Add new form to see job details - Add bacula-docs.spec - Remove bacula-docs.spec - Split docs into bacula-docs.spec - Remobe bacula-docs.spec - Split docs into bacula-docs.spec - missing less than beforehistory | grep svn :D 31Jul09 - Split docs out of bacula.spec - Insert the tabbed widgets as opposed to adding to the end. - Don't dock the page for dirstat and restore tree until the page selector tree widget is clicked. - I like this sorting method better. - Update bacula.spec - Apply quick fix from Ulrich about the last feature. - Continue work on bacula.spec 30Jul09 - rename the free_and_null macro - fix test name - update new features - chmod +x regress/tests/multi-storage-test - Allow restore from multiple storage - Update News - update tool - Modify enable/disable commands to show only appropriate Jobs. 29Jul09 - Add ACL check for client in estimate command - Change time_t by utime_t in accurate function - Start reworking 3.0.2 bacula.spec file 28Jul09 - Display the job_zoom view when backup is finished 27Jul09 - Add DESTDIR to Makefile - Add file to build html doc - add changelog link - Add changelog on the main menu - update doc - add downloads pages for all lang - Remove the Patch section and add the new Download area - Link to new downloads.php - Add tool to convert nasty sourceforge download page to a simple one - Update - Update README for binary install tests 25Jul09 - change free_and_null function to a macro - Add Spanish files translated 24Jul09 - Add format to a fprintf - Attempt to fix SQLite seg fault problem - Fix Expired option in media list to select Used media - Set selection items on top. - this should resolve issues that people are having with this splitter. If you try to make it too large, it just snaps back. 23Jul09 - Fix int/int32_t problem in accurate_add_file - Permit to filter on the directory name as for file - fix bad english sentence - add function to simplify free and null operation on pointers - Remove Qt 4.4 code so it compiles on 4.3 (setHeaderHidden) 22Jul09 - Apply idea of part of Graham's tidy-bsr-source.patch, but modified - Fix bug #1337 Console tries to build with SSL when libssl-dev not installed - Modify setJobStatus so cancel has same priority as fatal errors - Fix Solaris compiler warning in signal.c - Change selection behavior in the director status screen. - Do not restore spliiter settings if the settings do not contain settings for that splitter. - This is committing most of the patch received from Eric. 21Jul09 - Merge branch 'bwebII' - use $conf, $tmp, $script, $rscript in accurate test - Fix Spanish files translated 20Jul09 - es.po merged with bacula.pot 3.0.2 19Jul09 - This is the change that may be used in the future to resolve the issue with text input required during a console communication. - Final changes - Add es lingua - Fix Spanish build - Final changes - Add first cut bsys spec - update bweb INSTALL - update INSTALL 18Jul09 - Add info on bweb + lighttpd - Fix bat command line input bug - Don't show the connection message after first connection is made 17Jul09 - update copyright year - Optimize a bit the running job view - Fix bresto file relocation box - Update copyrights - Put back old status icon - Fix sql query for sqlite on suse10 on copy job - Fix Spanish files translated 16Jul09 - Remove print and save menu - Simplify the main screen, removing the status dir console icon and the "go back" one - fix spell - fix case problem in field name - update for status slots - Replace info_msg by send_msg in status_slots for bat - update ChangeLog for 3.0.2 - document @help - Ignore TAGS - +x the test file - test with file instead of vtape - Add test for bug 1288 - Add slot field in storage operations Update update volume page - Use BUILD_DIR in default conf - Fix #1323 about a problem when mounting a requested volume during a restore. - Use the read as primary color in bweb - Fix script for vtape tests - Fix graph_font parameter to work with graph module Avoid warning messages in apache log with graph module - Update - update INSTALL file - update apache section in INSTALL file and try to choose better color for graphs. - Fix Spanish files translated 15Jul09 - Parameterize depkgs directory - Add back bootstrap to FD - Make CONF::init header and .c file agree about types - update - update cloud project - Force the client_encoding to SQL_ASCII when database is already using this mode. - Fix #1335 about postgresql error message during copy session - Add documentation about new restore menu - remove non-essential directories - Fix Win64 build - Add more example SD Device configurations 14Jul09 - Apply patch in bug #1315 by McMichaeli that fixes scripts/logwatch - Add more output when spooling and no space left - fix next-vol-test - Fix postgresql driver bug that displayed rows from time to time. - Small fix on accurate code for new restore menu option - Change default save dir to sbindir in bacula-dir.conf - update project files for project 2 - Should fix #1323 - Implement project 2, about new restore menu - Update date - Remove some whitespace - Send bootstrap directly from DIR to SD 13Jul09 - add -u to diff - revert changes - Update new features - Create build scripts for Win64 somewhat equilavent to the Win32 ones 10Jul09 - Print correct JobId in bls, should fix #1331 - Rebuild configure - Apply python detect patch from Bastian Friedrich - Add --with-hostname to ./configure 09Jul09 - More changes in es.po (37%) - add --with-hostname to ./configure - Changed ACL_OTHER into ACL_OTHER_OBJ as IRIX doesn't seem to have ACL_OTHER. Fixes bug #1333 06Jul09 - Remove non-portable reference to pthread mutex - Display command output by default - Add new Spanish files translated 05Jul09 - Turn off bat debug code - Fix compilation bug - Small change to allow the compiler to optimize it easier due to the constant. 04Jul09 - Add new Spanish files translated 03Jul09 - Correct registered trademark notice - Should fix the first part #1323 about the restore option "List Jobs where a given File is saved" wich display deleted files 02Jul09 - Add estimate accurate doc - add accurate=yes/no test for estimate - Update help page with accurate=yes/no - Add estimate accurate=yes/no ebl Change the code to check jcr->accurate and not jcr->job->accurate - Add estimate test - Make estimate command accurate compatible. Should fix #1318 - Fix es concepts compile problem - Update for Spanish - Another fix for bug #1311 to get the correct last_full_time - Add new Spanish files translated - Update - Add base of Spanish manual - Add directory to Spanish docs; Spanish (es.po) 25% translated 01Jul09 - Fix false zombie detection in next-vol-test - Add test with accurate mode (it shows the #1323 bug) - Fix bug #1317 Allow duplicate jobs = no does not work - Eliminate double job report when do_xxx_init() returns failure - Fix regress tests to handle new default job name - fix copy-volume-test - update Item 2 - Add debug code to MaxDiffInterval 29Jun09 - Change bacula-dir.conf default job name from Client1 to BackupClient1 - Document #1318 about estimate and accurate mode 28Jun09 - Add a column for job type to the jobs table - Fix missing case for NetBSD xattr restores. 27Jun09 - Fix Win32 build -- turn off lockmgr and remove lockmgr defs - Added symbols required for win32 build 25Jun09 - Modify xattr.c and acl.c not to fail the job on errors. This should fix bug #1305. 23Jun09 - Fix 2 rather big bugs in the xattr and acl code and fix a small memory leak on a particular code path for Linux xattr/acl handling. - update newfeature with project 37 - Update FileSetId when initializing job. - fix compilation problem - add a note about /sys/class/scsi_tape/nst0/default_compression, fix #1314 - Add '*' when volume is online when displaying volume list in restore. Should complete project 31. 21Jun09 - remove bnet_fsend and use class call - Re-fix bug #1311 if MaxDiffInterval exceeded ensure job upgraded 20Jun09 - Fix bat install for 3.x 19Jun09 - Add a boolean to console class to allow for the warning popup, except in cases where I want to prevent the popup. So far this is only for purging jobs. - Correct a misspelling in a relatively trivial spot. - Add job type and first volume of the job to the 4th pane the version table. This is so that when looking at what version to restore with copy jobs the user can make a better decision as to which job to restore from 18Jun09 - Back out previous maxdiff patch, which is broken - Add all Job Types to job_type_to_str() for bat - Commit maxdiff patch - Fix bug #1311 if MaxDiffInterval exceeded ensure job upgraded 17Jun09 - Fix bug #1305 make errors obtaining acl during backup non-fatal - Commit btape fill patch - Fix bug #1309 inappropriate error message during btape fill command - Fix bug #1307 AllowHigherDuplicates=no prevents automatic job escalation 16Jun09 - Update VirtualFull doc + BSys course dates 14Jun09 - move 3.0.0 patches to 3.0.x dir - Add 3.0.x patches dir - Update with 2009 Vote - Forgot to add the images for the new button. - Add a previous page button to the button bar. 13Jun09 - Add feature in pages to have a console command that does not set the console current. Then also use that feature in joblist to purge or delete a job. - Add a stringlist and a foreach after populating to at least acknowledge to the user that a new fileset. Bat would not show the fileset until the database table had the fileset which was not until used. 12Jun09 - Remove non-portable code referencing pthread_t fixes bug #1308. - Remove non-portable code referencing pthread_t - Create patch that may fix bug #1298 and bug #1304, which causes an SD crash after canceling a job. 11Jun09 - When looking at what got backed up from a windows differential, found a bug where it would create many "Bases". This fixes it subtly. 09Jun09 - Add checkbox widgets to filter out copy and migration jobs. 08Jun09 - Attempt to get bat conf file installation to work with DESTDIR - Commit migrate patch for bug #1303 05Jun09 - Improve error messages when a migration sql query is used and correct the problem identified in bug #1303 with starting Job names containing spaces. - Fix #1306 when building static bconsole 04Jun09 - Did not intend to leave those debugging lines there. - fix vtape test to work with the latest trunk - Reorder project file with poll result 03Jun09 - update 01Jun09 - Setting actions up like this I think is better. No restore from job or time if more than one job selected. - Add columns for first media and volume count. Change some semantics of how signals execute functions when a selection list is changed. - Prevent warnings from showing as dialog boxes that can interupt multiple operations performed in a foreach. 31May09 - Sort the lists after population so that drop downs are sorted. 30May09 - A fix for mysql database sql syntax. - Add columns to the tree to show read/write time, scratch pool, recycle count. - Somehow I was losing the refresh jobs action. This should keep it in. 29May09 - untabify - Add ids on command.tpl to fix #1300 28May09 - Correct incorrect placement of trap for m_firstpopulated. - There was an issue with empty directories. The director would print node xxx has no children and bat would interpret that as a directory. This fixes it but it may not be the best solution. - update 27May09 - Make sure that vtape directory is created during -tape tests ebl change grep -e to grep -E to make source-addr-test working as expected - Simplify mysql bresto part. Should be faster, but need tests 26May09 - On vacation I am having a little fun !! - Add documentation for new directives DirSourceAddress and FDSourceAddress - Apply Steve Polyack patch to add DirSourceAddress and FDSourceAddress directives. That permits to choose the outgoing interface. - make fileregexp-test working with git repository 25May09 - Apply Marco's patch: mvw Allow acl and xattr to be explicitly enabled and fail the configure if we are asked to enable acl or xattr support and the OS doesn't support acls or xattrs. - Add more Spanish site modifications 24May09 - Commit changes for Spanish site 23May09 - Create Client record in database at startup -- makes bat work better - Disable scratchpool-pool-test because it hangs - Rework printed message when files are purged on restore - Turn off useless End of file message during restore. - When doing a tree selection restore, look at the PurgedFiles column in the first JobId, and if non-zero, the Job was purged, so do not do selection - Yet another try to get qmake to install bat correctly 21May09 - Add Catalog = all to the default Messages resource 20May09 - Add Spanish directory - Fix race in director job start which was allowing the number of concurrent jobs to exceed the maximum 19May09 - Comment out broken fake-autochanger change - Speed up media list generation when using "compute with directories" option - fix dates - update - Fix #1029 about resolution address order. Thanks to David. - Add patch for #1029 - During jcr destruction hold jcr_chaing lock only for minimum time necessary. This should fix the SD deadlock in bug #1287. - Simplify messages printed by SD when reserve fails. This should fix bug #1285 - Add sleep in vtape changer to simulate real hardware 17May09 - speed up mysql to compute restore table ebl speed up mysql when computing media list ebl fix media list display ebl fix bresto problem with drag&drop 16May09 - Fix libxml dependency for rh7 per Pasi Kärkkäinen . - Create archivedir 15May09 - Back out unwanted change. Should fix problem reported by Yuri - add index on temporary table to speed up mysql part during restore - Fix display of / on bfileview - Yet another attempt to get qmake to generate valid Makefiles that installs the binaries. It seems to require the binary to exist at qmake time - Apply fix to sql_cmds.c suggested by Ulrich Leodolter which prevents restore by file selection from using Copy jobs. - fix drag&drop 14May09 - Add new nagios_plugin_check_bacula.tgz from Masopust, Christian - Reduce bconsole help to fit in 80 columns kes Add bconsole @help command kes Fix Show FileSet command to handle spaces - Allow specification of base daemon resource name. --with-basename= - Fix bat to automatically use installed bat.conf - bat not installed even if configured. Fix by working around apparent bug in qmake 13May09 - update - Turn on lockmanager when using DEVELOPER flag 10May09 - note that vtape is not ready for production - remove unused file - More scripting stuff 09May09 - More scripting parameterization - More parameterization of scripts - First cut parameterize better regression tests 07May09 - fix mysql problem with the restore query - rename JobHistory to JobHisto 06May09 - update os table - ebl update german version - update supported os table - change the ugly grey background on symbole and images to white - small fix 05May09 - ebl Make working the "compute with directories" option --This line, and those below, will be ignored-- 04May09 - Updates - add screenshots - Add screenshot and update french main page - add screenshots - update - Add new images - Fix ldconfig problem in client only build. - don't display copies like in bconsole - Added extra logging to determine the exchange server in use 03May09 - Fixes for client build. - Update main page - Update - update - Only define winapi's for 32 bit build. Already defined for 64 bit apparently... - Change GetComputerName to GetComputerNameEx so that in a cluster we get the name of the vserver instead of the local machine. Added prototypes for GetComputerNameEx which appear to be missing. 02May09 - 3.0.1 - Don't run backup at same time as restore to avoid deadlock in concurrent test 01May09 - update - Update documentation 30Apr09 - Ran into a problem deleting a volume. This fixes it. - Update News - Fix purged restore prompting - Final changes 29Apr09 - update - Add bypool option - add bypool option - Fix error message - Fix bug #1282 Setting job.Priority in python crashes director by checking if string addr is NULL. Not tested. - Fix bug #1281 allow all on restore command line to restore pruned JobIds without prompting. - Add vectorized bat image 28Apr09 - Check for job_canceled() in fd_plugin code - Update Win32/64 table creation to have new DB version 11 format - Remove illegal Options in Exclude of default Win32/64 bacula-dir.conf - This is the fix to http://bugs.bacula.org/view.php?id=1276. The select class was just not working with the new requirements of setting and clearing the notify. 27Apr09 - Fix bug #1274 where a migration job can be canceled like the original job by the MaxRunTime directive. - Added fix for bug #1275 where acl or xattr data is saved for virtual filenames generated by filed plugins. 26Apr09 - Set slot max to 60 - Permits to eject Used tape - update ScriptAlias - Remove Reposition info message - Fix platform scripts not to clean configured files during 'make clean' use 'make distclean' to clean everything. 25Apr09 - Add build tag for distribution name. 21Apr09 - Fix copyright + trademark name - add doc for new VerId option 20Apr09 - Fix suggested in bug 1273 16Apr09 - Add additional mysql connection debug code - Fix bug #1246 Sometimes access denied with VSS enabled. UCS conversion cache was not properly flushed at the end of a Job 15Apr09 - Update - add missing BACULA define 14Apr09 - update - Fix bug #1268 Full Max Run Time cancels jobs (when Max Run Time = 0). - Ignore scripts/bacula-dir.conf.maxruntime - revert pool changes and correct the problem 13Apr09 - Add new maxruntime test -- not yet working - more fixes about pool=defaults - more fixes - fix more pool problem - fix pool problem 12Apr09 - specify pool in label process to avoid problem - use scripts/bacula-dir.conf instead of bin/bacula-dir.conf - Add debug message when checking database encoding - Test postgresql encoding at the start of the test 11Apr09 - Modify insertion of read Volumes in SD to be done before the drive reservation. This ensures that a Volume to be read will not be reserved for writing. - Clean old patchnotes - Turn developer back on 13Oct09 Release Version 3.0.3: 16Jul09 Release Version 3.0.2: 29Apr09 Release Version 3.0.1: 05Apr09 Release Version 3.0.0: 28Dec08 Release Version 2.4.4 27Oct08 Release Version 2.4.3 26Jul08 Release Version 2.4.2 07Jul08 Release Version 2.4.1 04Jun08 Release Version 2.4.0 25Jan08 Release Version 2.2.8