Technical notes on version 1.37 Kern Sibbald General: Changes to 1.37.29: 13Jul05 - I finally found and squashed the elusive SD crash. I needed to initialize the used volume list before firing off the device initialization thread. Changes to 1.37.28: 11Jul05 - Make sure that bpipe results are zapped even on error return. - Lots of documentation. - Do not prune volume marked as append when needing a new Volume. - Print a warning message in SD if a non-used Volume is specified and autolabel not turned on. - Correct a bug in chksum.c concerning SHA1 signatures (an * should have been & when checking for a bit flag). - Print File:Block for all label records in label.c -- concerns primarily bls when doing Job listings (-j). - Correct is_volume_in_use() to return false if testing on the same device where the Volume is already mounted. - Define a init_done flag in the SD that is set when the devices are initialized and make users connecting wait. This prevents useless connect failure warning messages. - Do additional device locking in ask_op_to_mount_volume() to prevent race conditions with a user labeling a Volume or autolabeling. 09Jul05 - Add a test for error return from bnet_wait... in heartbeat.c in FD to avoid CPU loop. - Implement TLS in gnome console and wx-console. 08Jul05 - Correct a NULL pointer reference in the mount command. - Correct typo in Copyright - Add detection of EOM for IBM drives (i.e. errno == ENOSPC) 07Jul05 - Remove temp file created in mtx-changer script. - Make fsf_dev() into a class method. 06Jul05 - Modify mtx-changer.in script to return slot:barcode for Volumes that are loaded in the drives. - Correct some more places where dev->is_blocked() needs to be checked in dircmd.c in SD. - Update doc. 05Jul05 - Add code to ensure that reserved but unused volumes are freed. - Correct how Volumes are mounted and handled so that the SD does not get stuck if multiple volumes are used (recycling, relabling, ...) - Correct bug where you could relabel a volume while it was being acquired -- created chaos. 04Jul05 - Correct seg fault caused by open() calling sequence change. 03Jul05 - Add new rc-chio-changer script by Rudolf Cejka to examples/autochangers - Apply Rudolf's changes to bacula.in - Expand the space from 8 to 10 characters in editing file sizes for restore and dir of catalog, otherwise GB sizes are truncated -- fixes bug report. - Modify wx-console to know about 10 character widths. - Allow decending into top level directory if "recurse=no" is set. Fixes a bug report. - Install pthreadVCE.dll when installing console or wx-console on Win32 systems. Fixes bug report. 02Jul05 - Tweak dvd-writepart script to prevent door from opening/closing so much. - Remove GROUP BY in several PostgreSQL commands to prevent error. Resolves bug report. - Ensure that < as first character of filename list is not treated as a directory for restore. - Add debug to heartbeat in FD as it seems to go into an infinite loop from time to time during SD failure in DVD writing. - Add more debug code to dvd writing. - Attempt not to destroy existing fs on DVD. 30Jun05 - Detect device mounted for DVD and suppress be sure to mount message after label. - Set Cleaning tape status to "Cleaning" and force no MediaType. - Get DVD writing working with new standard Bacula open() code. - Rename get_filename() to make more sense. - Detect "is already mounted on" on mount command so to avoid error if device is already mounted. - Eliminated guess_name() code. It may be necessary to add it back later. - Eliminate seg fault from printing invalid results. - Make dvd_write_part() bool. 29Jun05 - Attempt to fix DVD writing by eliminating a number of the DVD subroutines to simplify. - Modify DEVICE::open() to take dcr as first argument. This will permit providing more info to DVD opening. - Fix scanning for time/size items which in some cases ate the next line. - Eliminate read_dvd_volume_label(). New code (not yet written) *must* open dvd appropriately before calling read_dev_volume_label. - Modify open_first_part() open_next_part() to take DCR as argument. - Make label command from console work on DVDs. - Make mount command from console work on DVDs. Unmount does not work yet. Changes to 1.37.27: 27Jun05 - Add Database vendor to CatalogRes tuple for Python. - Update doc - Implement DoesVolumeExist(Vol) for Python. - Prevent python command from seg faulting if no arg given. Changes to 1.37.26: 26Jun05 - Add set_mode method in DEVICE. - Correct set_mode method in DEVICE - Add more DVD debug info 23Jun05 - Check for incorrect duration and size modifiers in conf files. 22Jun05: - Make Version a tuple (version, build-date) - Add CatalogRes tuple (DBName, Address, User, Password, Socket, Port) - Add Version, ConfigFile, and WorkingDir as Python attributes in the Director. - Implement code (principally for Win32) that on failure to create a file, it will cd into the directory and attempt to create the file using a relative path. This avoids creating files with paths which fail on Win32. - Fix parsing of times and sizes with decimal numbers. - Make free_volume_list() in SD work if vol list is not initialized (./bacula-sd -t). 21Jun05: - Add debug error printout when open() fails. - If open() of DVD fails in mount.c, return false. - Split open() code for DVD into separate subroutine in dev.c Changes to 1.37.25 released on 20 Jun 05: 20Jun05: - Remove (cd gnome-console; make clean) from src/Makefile.in - Fix bug where Storage daemon gets confused about what tape is mounted. (one line of code was inadvertently deleted). Changes to 1.37.24: 18Jun05 - DVD writing/reading seems to be mostly working. - Set execute bits on dvd-freespace and dvd-writepart - Make dvd-freespace use existing dummy file. - Modify dvd-freespace to pickup size from Track Size: 16Jun05 - Add Date, Job, level to updates to .bsr file in dird/backup.c - Add debug info to dvd-freespace.in - Fix hard coded bacula.sql in make_catalog_backup reported by a user. - Make sure a verify volume to catalog never reports an error if there are zero files to verify. - Remove confusing debug info in filed/backup.c on network error. - Make sure output from console is not sent to system log. - Convert open_dev() into a class method. - Change VolHdr.VolName to VolHdr.VolumeName. - Add a flag in the device state word to indicate that we found Media in the drive (DVD). - Make mount_dev() and unmount_dev() return bool. Changes to 1.37.22: 14Jun05 - Fix the same state variable problem in open_next_part(). - C++ify the SD code a bit more. 13Jun05 - Add more debug code and clarify debug code for DVDs. - Do not save and restore state in open_first_part() since state should be properly set after open_dev(). - Make default mandir /usr/share/man - Install Bacula man page. - Implement passing of FileSet Enable VSS to FD. - Move main body of reserve drive code into subroutine so that it can be called multiple times. 12Jun05 - Eliminate getpass() for Win32 builds in console as the function does not exist. 10Jun05 - Correct some reservation problems in SD when no devices are available. - Start removing #ifdef HAVE_TLS by sneaky tricks. - Begin implementation of TLS in wx-console - Remove ignoring SIGCHLD from console. - Rework the dlist binary search routines for implemenation of the Volume reservation code -- make it more general. - Strip double slashes // from Win32 filenames in an attempt to resolve restore problems on some systems. - Fix a minor bugs in the trace code that caused the first line output to be lost. - Implement a good first cut at adding Volume reservation code to the storage daemon (in file reserve.c). - Remove old unused code from the tree.c routines. Changes to 1.37.21: 06Jun05 - Fix compile problems on Win32 - Start writing Volume reservation list (already exists, but is not really very good). - Implement attribute caching to put Signature into database at the same time as the file attributes thus eliminating a number of database accesses. - Correct a reservation problem. - Implement full Dir Storage use. - Reduce a bit of TLS #ifdeffing. Changes to 1.37.20: 04Jun05 - Minor changes 01Jun05 - Add more documentation to mtx-changer.in - Correct link to manual in authenticate.c in various directories. - Create a new src/stored/reserve.c file where the Use Storage command is processed and drives are reserved. - Modify src/stored/autochanger.c to keep track of each Slot that is loaded for each device. - Ensure that changer_command and changer_name are picked up from Autochanger resource if not specified, and if neither is specified, err. 30May05 - Fix bextract.c compile problem - Create bacula.man - Make make distclean clean a bit better 29May05 - Remove old code in jcr.c - Make testls release jcr chain when terminating. 27May05 - Implement Maximum Job Spool Size (actually DCR based) 26May05 - Use light weight non-recursive locking on jcr chain. - Make JCR a class and implement inc_use_count() and dec_use_count() methods that ensure that the jcr is locked when inc/dec the use count. - Remove the global jcr lock when traversing the jcr chain. - Use dlist to implement the jcr chain rather than hand crafted next and prev links. - Lock the jcr chain inside each function that modifies the chain. Changes to 1.37.19: 26May05 - Fix compile problem of ua_restore.c on broken compilers. - Apply patch from bug 326 to permit bacula status by any user. - Fix bug 325 -- conversion of 12:30pm to 24hour time. 25May05 - Put Dmsg() on inside if() to avoid calling subroutine. - Make restore.bsr have unique name. - Allow user to define bsr filename on restore command line with bootstrap=xxx.bsr - Add limit=nnn to "list jobs" command. - Remove old restore code that did not use .bsr file. - unlink automatically generated bsr file. - Cleanup heartbeat code so that duped fd is almost sure to be released. Previously under certain conditions, the memory was not released due to race conditions. - Shorten copyright. 20May05 - Unify the reserve_device() for a single device into one subroutine. 18May05 - Modify wait during use_device to happen only after all devices have been examined rather than in the reserve_device code. - Correct updating count of number of Volumes in a pool. Changes to 1.37.18: 16May05 - Add more debug to SD for Autochangers + status output. - Add Scratch to PoolType in PostgreSQL make...tables and do not permit NULL PoolTypes. Fix for bug 319 reported by Eric. - Update LICENSE. - Add quotes around filename in parse_config error message. Bug reported by Eric. 15May05 - Change nested \include to \input so that sections are properly included in the pdf manual -- update the Web site. - Set reconnect flag in MySQL packet to 1 to ensure that connection is re-established. MySQL 5 changed default to 0. Fixes bug report. - Fix Scratch pool handling as reported in a bug by Eric Bollengier by applying his patch. - Remove delete job in favor of delete jobid. - Add = NULL to configfile definitions as reported by Eric in a bug report. - Update winbacula.nsi.in to reflect new manual file structure. 10May05 - Correct a minor build problem with wx-console. - Add cancel() to Dir Python scripting. - Re-correct bug in parse-config error handling. - Reorganization of use_command in SD to permit waiting and multiple drive autochanger support. 09May05 - Correct bug in parse_config error handling. - Where ever possible mark a volume in error or not InChanger in mount.c - Fix bug in changing tape pools after first backup. Reported by Peter Sjoberg. - Enhance mtx-changer to use Working Directory as temp. - Remove all but initial setup locking of Res in SD. 08May05 - Add Client OS type to Job report. - Add version to manual - Update the Web site to have a single page for the documentation links. Changes to 1.37.18 release 08May05: 08May05 - Correct attribute definition compile error in 1.37.17 - Correct inverted order of CreateTime and MD5 pointed out by a user in a bug report in FileSet db routine causing the MD5 to print in the output instead of the time/date. Changes to 1.37.17: 07May05 - Implement cstrlen() in sql list routines. - Implement caching of attributes to add the signature so that only one DB call will be made per file. Not yet turned on. - Fix Win32 build for TLS. - Optimize File pruning to eliminate one database call. - Fix bug that prevented File pruning from working. - Implement a cstrlen() which returns the character length of a UTF-8 string. 06May05 - Move test for MaxStartDelay as suggested by Peter. - Implement Python methods (I had to read the Python source code). - Implement run() method in Director. - Add Priority and Scheduled time to Job report. - Add JobInit and JobRun events. - Add Priority as Python read/write attribute to Job. - Correct typo in bsmtp reported by Jo. Changes to 1.37.16 released 05May05 03May05 - Make a few tls ifdef tweaks. - Fix create_file.c Win32 problem pointed out by Peter Sjoberg. - Fix really ugly bstrncpy() but found by Thorsten. - Move winapi.h/c from findlib to lib for inclusion in multiple places. 02May05 - Thorsten Engel finished his work on Win32 Unicode. We now have a single executable that runs on all Win32 machines. - Move job initialization code after job scheduling so that Verify jobs check for the prior JobId after they are really started rather than before. - Fix lib/fnmatch.c so that it does proper testing before folding. - More documentation -- at tls and ansi labels chapters. - Fix fileset_convert.pl to handle empty Exclude statements. - Turn regex back off in Win32 01May05 - Fix sign extension problem in lex.c that reads UTF-8 with Chinese characters incorrectly. Changes to 1.37.14: 30Apr05 - Remove a few HAVE_TLS #ifdefs - Implement final Python style interface. More implemention to be done, but the interface should change little if at all. 28Apr05 - Make default no tls support. You must add --with-openssl to get tls support. 27Apr05 - Update Web header to include google search in the search box -- thanks to input from Michel Meyers. - Fix md5sum so that it builds with the new openssl stuff. - Take some enhancements to the md5sum test program proposed by a user. 26Apr05 - Make option 2 of restore work better (list last 20 locations for a file). - Make SD re-open a device with the right permissions if it was previously opened with something different. This should allow reading read-only Volumes under all circumstances. - Implement restore of a single directory. - Apply Tru64 patch supplied by Pascal Pederiva - Apply Unicode fixes for Win32 from "Thorsten Engel" - More work on Python read feature in FD. 22Apr05 - Fix (hopefully) the ftello() overflow reported by Peter. - Landon Fuller committed his TLS patch. - Fixed two minor warnings in console.c with TLS turned off. - Updated the Makefile.in for wx-windows and tray-monitor to handle TLS. I can only build the tray-monitor. - Fix bscan to open tape in read-only mode (actually fix it so that it doesn't use the standard open routine). - Correct what appears to be an error in setting the return value in dvd.c 21Apr05 - Get FD Python running -- design Python backup interface. - Fix seg fault in SD when referencing Alert Command. - More documentation. - Fix one more thing in Win32 build. 20Apr05 - Doc updates - Fix Win32 build - Put in production here Changes to 1.37.13: 19Apr05 - Fix SQLite and PostgreSQL table creation script syntax problems. - Fix new Python code to work for Director. - Move lib/python.c to lib/pythonlib.c so that debug output is easier to read (can distinguish lib from dird, ...). - Cleanup Python build so that Python is not dragged into programs that don't use it. Changes to 1.37.12: 18Apr05 - Make Bacula build without Python - Drop Status table in drop_ scripts -- bug 283. 17Apr05 - First cut of new Python implementation. - Doc updates - Correct SuSE autostart installation directory name -- supplied by a user. - Fix director crash if Name directive not supplied in a Job. - More cleanup of changing %u to %s for DB IDs. - Replace dev_can_write(dev) with dev->can_write(). 11Apr05 - Make fsr_dev() a method dev->fsr() - Remove Created new FileSet message as it always comes out in the daemon messages. - eliminate dev_is_tape() in favor of method dev->is_tape() - Turn on disk seeking during restore for Disk Volumes. This required some changes to bscan -- they seem a bit suspect as they are not symmetrical for tape/files. - Remove some of the recursion in stored/parse_bsr.c - Move rescue out to a new Bacula project. 08Apr05 - Update of web site to replace old released doc with LaTeX version. - Replace logo in doc with new bat logo. - Make a good number of updates to the manual. - Implement Python scripting using a Python object. This makes interfacing with Bacula cleaner (object oriented). - Add Phil's Status table to the database -- used for getting a text description of the status codes. - Modify FileSet so that an empty Options (no pattern matching) with an exclude will exclude all files. - Modify FileSet so that no top level included File item can be excluded by a matching pattern. - Suppress Created new FileSet record in daemon output. - Implement Python in FD. - Turn off old bfile reader code -- to be replaced by Python. 05Apr05 - Remove more recursion in src/dird/bsr.c as pointed out by Peter. 04Apr05 - Increase the index width of Filename and Path entries to 255 chars -- suggestion of Meno Abels. - Change remaining VARCHARS to TINYBLOBs. - Remove recursion from is_volume_selected() following bug report from Peter. - Implement mostly correct handling of use_storage in the SD with full lists, ... 02Apr05 - Reset NumVols in Pool record from database on every update Pool. - Modify DB to support multiple simultaneous copies and RAIT stiping. - Pass copy and stripe between DIR and SD and put into the JobMedia DB record. - Update and test SQLite and MySQL datebase creation and update scripts. - Implement version 9 of the DB. 31Mar05 - Convert more atoi to str_to_int64() for DB. - Implement filling in NumVols by querying DB rather than trying to keep track of it. - Add storage name to string passed to in use storage= - Fix newVolume() so that the Python script is always called. - Fix handling of pool,PoolId, and storage in ua_output. - Same fix in ua_status.c - Remove required locking of resources - Replace pthread_cond_signal() by pthread_cond_broadcast() hoping to fix the /lib/tls hang problems (lost signal). - Move resource locking seaching from parse_conf.c to res.c in src/lib. - Modify end of volume handling so that fixup_... does not redo what block.c has already done -- writing Vol info to DIR. This fixes a bug with bad numbers of files on a tape when it filled as reported by Peter. - In release_device() do not update the DIR on the Volume info if the the information was already written at the end of the tape. 28Mar05 - NOTE!!!! This version has a new DIR <--> SD protocol. Both must be updated at the same time. - Begin implementation of passing all the Storage and Device possibilities to the SD for examination during the reserve phase. - Modify the reserve and acquire code in the SD to make a job wait if the device is not available. - Implement New Volume Each Job in DIR and pass to SD, not yet used. - Remove init/update of the Device resource in DIR - Remove passing PoolId to SD and back. 26Mar05 - Remove \a and -e from error echos in most Makefiles. - Add more debug code when there are errors on the tape to try to find Peter's tape problem. - Add wait.c (oops forgot previously). - Move all the reserve/acquire_device_for_read/append to have only a DCR as the argument. - Rework the reserve_device_for_append() in stored to wait if the drive is not available. Note! This is a short term solution. 25Mar05 - Comment out Multiple Connections in the document. - Move the P() and V() to subroutines so that they can be accessed from class methods. The reference to strerror() caused problems. - Implement new DEVICE class methods block() and unblock() that do what was previously done in 3 lines of code. - Implement wait_for_device(), which will wait for any device to be released then return. This requires a new global mutex and condition variable, and is implemented in src/stored/wait.c - Change the code in reserve_device_for_read(), which previously failed the job to use the new device wait code. 22Mar05 - Apply reschedule patch to 1.37 code. - Add copyright to title page of manual so it is clear. - Create patch for rescheduling problem found by Ludovic. Storage pointers were lost during rescheduling. - Attempt to fix 2.6 rescue disk -- failed! - Start working on adding a wait routine in the SD. - Cleanup some old invalid doc in watchdog. - Convert a number of references to dev->dev_name to dev->print_name(). - Add new wait.c file to SD. - Add a few more methods to DEVICE in SD to cleanup code a bit -- implement a few of the methods. 18Mar05 - Fix more print_name()s for printing device name. - Modify open_dev to try 10 times every 6 seconds to open the device if it gets an I/O error (meaning no volume mounted). This gives a bit of settling in time for an autochanger and avoids spurious messages. - Change all yes/no to yes|no in the manual. - Fix win32 create_file.c typo. - Fix a typo in an error message. 17Mar05 - Detect if fseeko exists with autoconf. If so, use it and ftello. - Remove old bacula-*.conf from examples directory (out of date). - Remove latex-fr index files from CVS. - Rewrite code that stops reading the tape so that the tape is marked at EOT, then once the work is done, the EOT flag is removed. - Flush output to file after every send in console. - Make setting VolFiles to smaller number fatal. - Disable Multiple Connections code. - Add patch from user for NetBSD statvsfs() fix to fstype.c - Take more care with errors in acquire.c - Don't run through dvd code in append.c if bad status returned. - Modify code so that an autochanger fault is fatal. - Use dev->print_name() in more places. - Implement dev->can_steal_lock() to simplify code. - Make btape re-read first 10000 records on fill command. - Check error return and fail job from fseeko and ftello in spool.c. Don't let a -1 slip in as size. Changes to 1.37.7: 15Mar05 - Apply NetBSD patch from kardel in bug 258. 14Mar05 - Add a second job and a second client to the default bacula-dir.conf file. - Remove old style Include/Excludes. - Fix ANSI labels to put EOF1 and EOF2 after each file mark. - Add Python to SD and FD. 12Mar05 - Implement IBM labels - Implement EOF and EOV labels at the end of a volume. - Fix a rather ugly problem with the PoolId not getting passed correctly. Now the DIR passes the Pool name and Media Type to the SD, who passes them back when requesting the next Volume. The DIR then looks up the correct PoolId. This takes more time, but always works, AND allows wild card Media Types (i.e. the SD can decide). - The DIR <==> SD protocol has changed. Changes to 1.37.6: 11Mar05 - Fix scanf of PoolId in catreq to handle 64 bit Ids. 10Mar05 - Add new ua_update.c file and move update_cmd there. - Modify "update slots" to obtain actual number of slots. - Tweak autochanger code to handle new slots request. - Modify autochanger code to lock/unlock around slots and update slots code. 09Mar05 - Patch the FD so that it does not issue an error message if it attempts to restore the permissions on a Win32 drive. - Edit "Resource-name" (physical-name) for the device name everywhere in the SD. - Remove .linked.tex files in preparation for cutover to using .tex in place of .wml. 08Mar05 - Copy latest config.sub and config.guess from autoconf. - Try new way of identifying drives with: "resource-name" (physical-name) More work need to a complete conversion. 07Mar05 - Rework some of the autochanger data so that the DIR has the number of drives. - Modify the way the Device info is returned so that it comes back as a special message type and can be sent anytime the Device status changes. - Copy the change name and changer command into the device record if none is specified. - Require the change command and changer name to be specified in and AutoChanger resource. - Force all the Media Type records of all devices in an Autochanger to be the same. 06Mar05 - Add new "run" command to Job resource in DIR. This permits cloning a job as many times as you want. - Pass PoolId to SD on Query request. It is now used in the Find_media catalog request. - Reworked the Device resource in the DIR. Eliminated num_waiting and use_count, but added max_writers, reserved, and PoolId. - This DIR is nolonger compatible with previous SDs. - Add since and cloned keywords to the Console run command to support cloning. - Implemented store_alist_str() to allow multiple string items to be specified in a .conf file. - Added %s (since time) to Job code editing. - Reworked reserving drives in the SD. It now does it much simpler and correctly. 05Mar05 - Integrate HP-UX patch from Olivier Mehani - Fix FD job.c to test correctly for no level. Changes to 1.37.4: 04Mar05 - Change Developers to Developer's Guide as requested by Michael. - Fix developers link in manual - Add additional dcr changes in SD to allow multiple dcrs. 02Mar05 - Fix a few problems with the MySQL table create in 1.37. - Delete the new tables in the table delete files. - Increase the number of items permitted in a conf table. - Make Director loop over alternative Devices specified in the Storage resource until one is reserved by SD. - Fix storing of StorageId in Media records. - Add AutoSelect = yes|no in bacula-sd.conf - Add Autochanger support to Label command. - Do not autoselect devices with autoselect set false 01Mar05 - Implement setting DIR Storage device to Autochanger name. - Select first available device in Autochanger. - Pass back actual device name used. - Allow Query of AutoChanger. - Modify Query to include name of AutoChanger if Device belongs to one. - Remove old Pool code in jobq.c - Add Autoselect flag to query and DEVICE class (still need Directive). 28Feb05 - Lock autochanger script when running. - Mark Volume not InChanger if correct volume is not autoloaded. - Corrected some typos in the make_xxx_tables.in files. - Made preliminary split of pre-run and run code for each job type. This will permit early opening of SD for reserving drives. - Add offline and autochanger fields to Device Query record. - Correct pthread_mutex_init() for autochanger in SD. - Tweak Makefile for LaTeX manual, plus add nav buttons. 26Feb05 - Clean up drive reservation system. Add more sanity checks. - Implement a few more methods for the DEVICE class in SD. - Add latex directories to make clean - move DEV_BSIZE to B_DEV_BSIZE to avoid conflicts with certain header files (FreeBSD). 24Feb05 - Fix an ASSERT that was triggering in stored/acquire.c attempt to fix a bug report. 23Feb05 - Corrected SunOs to SunOS in btraceback (user submitted). - Applied patch from Roger HÃ¥kansson to warn the user of defective AWKs during ./configure. 20Feb05 - Add some changes submitted by a user for HP client build. Not all changes accepted. - Rework code in filed/backup.c to ease #ifdefing and make program flow more obvious. - Split DVD code out of dev.c into dvd.c - Tweak #ifdefing to add back all the performance measurement #defines in version.h - Put most of MTIOCGET code in a subroutine to simplify the mainline code. - Make clean remove old CVS files - Remove unnecessary image files from Latex directory - Implement remaining parts of Storage DB record and its use in the Director. - Implement FullMaxWaitTime, Differential Max Wait Time, and Incremental Max Wait time in Job resource. - Start work on SD Autochanger code. 19Feb05 - Add back JobId index for MySQL as default -- speeds up pruning. - Add more database fields and fix the update scripts to include the new items. - Pass actual level to FD so that ClientRun editing can reflect correct level -- ditto for job status. This makes the DIR incompatible with older clients! - Move jobq.c acquire resources to static subroutine so that the code logic becomes clearer. This is in preparation for actually using the new Device resources. - Fix some lower case problems in sql_cmds.c reported by Debian. - Correct a seg fault in the SD reported by a user. Occurred only when a high debug level was set. - Modify init_dev() in dev.c to take JCR as first arg so that proper error messages can be reported in next item. - Modify the query and use device SD commands to attempt to open the device if it could not previously be opened. - Correct error message for Could not reserve device. - Correct some minor details with Autochanger resource in SD. 18Feb05 - Fix seg fault if debug level 900 set in SD. - Truncate Win32 child return code to 8 bits. - Remove some old lld's. Changes to 1.37.3: 16Feb05 - Make another attempt at fixing the ClientRunXXX return code bug on Win32 machines. - Apply ua_status patch from Carsten Paeth which enforces console ACLs in the status command for Jobs. 15Feb05 - Fix Media LabelDate and FirstWritten to be correctly set. - Fix deadlock in multiple simultaneous jobs. - Fix tape "truncation"/"number of files" after restore bug. 10Feb05 - Ensure that correct error messages are returned when reading an ANSI label. 09Feb05 - Modified ANSI label code to preserve any ANSI label already found by skipping over it rather than rewriting it. - Split the ANSI label code into ansi_label.c - Do not let user relabel an ANSI labeled tape. - Applied a patch for the console help command supplied in a bug report. - Added some new dev methods. Most notably was set_eof(), which handles setting all the dev variables when an EOF is just read. This is now used most everywhere in the code. 07Feb05 - Added code to detect that no files were inserted into the tree for a restore. If a specific JobId was specified, the user has the option of restoring everything. - More progress in implementing 64 bit DB Ids. - Modified the daemon start messages for RH. - Implement update scripts for all database types. - First cut at implementing restore directory (it will not recurse). 04Feb05 - OK, I think ANSI labels work. - Added Label Type = ANSI|IBM|Bacula to Device resource in SD. If this is set, it will force writing of the appropriate label type. - Added Check Labels = yes|no to Device resource in SD. If this is set, Bacula will check for ANSI labels and accept them, otherwise, ANSI labels will not be accepted when the tape is first mounted. 02Feb05 - Second cut ANSI labels. 01Feb05 - Merge Preben's patch for ACLs and for Mac OS X resource forks. - Some doc updates. - Display more informative message when a device was not found or could not be opened. - Add the sqlite3 database scripts. - Add some patches for 1.36.1 (note, I have now prepared a 1.36.2 with all the patches and some new features -- to be documented). - Some minor doc updates. - Add Arno's baculareport.pl script to the examples directory. 29Jan05 -- after vacation - Add support for SQLite3 (it seems to run at 1/2 the speed of SQLite2). Use --with-sqlite3 instead of --with-sqlite to get SQLite3. - Add target for running qemu to boot Rescue CDROM - Add code to support kernel 2.6 in Rescue CDROM -- does NOT yet boot correctly. - Implement ANSI labels -- not yet tested. This required changes to DB format. No upgrade script yet. Note, more work needed to modify "update" command to handle changing label types, also must restrict volume name lengths to 6 characters. - Add new Device, Storage, and MediaType records to DB. No upgrade script yet. - Add MediaType to bsr file record types. Not yet used in SD. - Permit multiple device specifications in Storage resource in Dir conf file. - Implement Device resources. Director requests Device resource info from SD on startup. - Note!!!! DIR->SD incompatible with previous versions. - Remove multiple Storage definitions in Job resource. One can still specify multiple Storage resources, but they all go into a single alist, and imply sending data to each Storage daemon simultaneously. - Implement Device query command between DIR and SD. - Allow DIR to "reserve" a Device. It will then be acquired when the FD connects to the SD. - Turn all DIR resources into classes, and implement a few class methods -- more to come. - Turn DEVICE in SD into a class, and implement a number of inline class methods -- more to come. - I had serious problems with ACL errors on my Laptop, and so had to add the following patch: @@ -181,7 +181,7 @@ } /***** Do we really want to silently ignore errors from acl_get_file and acl_to_text? *****/ - return -1; + return 0; } - Added edit_int64() - Reworked and tested a bit the htable routines. - Major changes to SD acquire.c -- DIR can now reserve devices. Needs lots of testing!!!! - Made a special state code for DVD -- this simplifies the logic of the code, but I probably broke it. Testing needed!!!! - Add AutoChanger resource to SD, but not yet used. Changes to 1.37.2: 12Jan05 - Integrate Preben 'Peppe' Guldberg 's acl patch. Fix case where configured but no ACL exists. Rework calling arguments to be shorter and positioned more typically in Bacula usage. 11Jan05 - Fix scripts/bacula.in to have awk on an environment variable and add comments for Solaris users. - Turn off inet_aton in src/lib/address_conf.c for Win32 - Add new files to win32 build and eliminate a compiler warning. - Add sample DVD Device resource to bacula-sd.conf 08Jan05 - Integrate Nicolas' patch for direct DVD support. 07Jan05 - Fix fstype error returns. - Apply Preben's cleanup.patch which puts back much of the cleanup code in src/filed/restore.c 06Jan05 - Apply all of Preben's patches, but revert to old backup.c and old restore.c in filed. Also turn off code in new acl.c because of errors. The new code, when fully implemented moves platform specific code into acl.c. One of the patches also implements WildFile and WildDir -- thanks. 01Jan05 - Implement Python in the SD (no events yet though). - Fix some typos in the previous commit. 30Dec04 - Enhance CDROM boot to include some documentation at boot time. - NOTE!!!!! The CDROM will not boot 2.6 kernels because the boot sequence has changed significantly. Updates to come later. - Add memtest option to CDROM boot. - Include Nicolas' changes to fix llist JobMedia records. - Make sure that ClientRunBefore/After messages from the program are terminated with a newline. Add strerror to output error messages. - Return program exit status code in Win32. 29Dec04 - Add memtest86 to Bacula Rescue disk - Enhance Rescue disk startup screen 24Dec04 - Move some variables to eliminate Solaris 2.6 compiler warnings. - Fix the seg fault at the end of a job in the FD when using old style include/excludes. 22Dec04 - Apply Preben's ACL patch. - Integrate Preben's restore patch. - Integrate Preben's verify teaks. - Fix doc/latex/Makefile to copy/remove .eps files when building html and web outputs. 21Dec04 - Fix Bacula so that it does not exit if there is a syntax error in its conf file during a reload command. Bug 182. - Apply fixes suggested for old Solaris networking. Fixes bug 190. - Apply Preben 'Peppe' Guldberg three patches that clean up white space: ws.patch.02.strings: Breaks strings that span lines into concatenated strings. I am not sure if you like this one. Other code works with concatenated strings, though. ws.patch.03.trailing: This removes trailing whitespace. No changes resulted from this for my setup. ws.patch.04.leading: This replaces space runs at the start of line with tabs. No changes again. - Fix overriding storage specification to be done through a subroutine. - Fix autoconf so it runs with FC3. - Add Python4.3 to configure search paths. - Always copy and delete storage definitions into jcr. - Check that VolumeName supplied by Python is valid. Return 0 if not. 19Dec04 - Fix undefined in non-Python build. - Update rescue disk to include mkinitrd - Fix umount_drives in rescue disk (only one arg to umount) - Ensure that if SD is manually set in Console, it is used. - Put generate_event on pointer and plug it in init. This permits using it in /lib - Correct despooling size reported to be Job specific rather than for the whole drive. 18Dec04 - Fix bug 207. jcr use count off by one when manually scheduling jobs. - Remove FNMATCH test in configure.in and always use the one in our library to get the FN_CASEFOLD GNU extensions on all platforms. - While using the rescue CDROM after my computer would not boot, I realized that it would be very useful to have a umount_disks. So, it is not implemented, along with updates to the READMEs and some minor tweaks. - Moved mounting the CDROM in the rescue boot from /cdrom to /mnt/cdrom (more standard location). - Reboot in CDROM rescue should now work -- requires -d option (no write) to work. - Hopefully fixed all the IPV6/4 problems and buffer problems with networking in lib. Bugs 190 and 204. Cleaned up a lot of #ifdefing problems by using routines in address_conf.c 17Dec04 - Apply Preben 'Peppe' Guldberg alist fix patch. - Remove duplicate code from chksum.h (mentioned by Preben). 13Dec04 - Integrate Tim Oberfoell patch to ACLs to handle both the "standard" and "default" ACLs. 12Dec04 - Integrated Preben 'Peppe' Guldberg three cleanup patches (btest, verify, find). - Integrated Preben 'Peppe' Guldberg three cleanup patches (backup, chksum, and verify) 09Dec04 - Integrated Preben 'Peppe' Guldberg patch to avoid doing MTIOCGET on OSes that do not support it such as OpenBSD. - Integrated Preben 'Peppe' Guldberg patch to add filesystem type matching to FileSets in the Options resource. - Integrated Preben 'Peppe' Guldberg patch to add Mac OSX resource fork support (save/restore) to Bacula -- HFS Plus support. - Add FileSet to client Job listing query. 06Dec04 - Integrated Preben 'Peppe' Guldberg patch to backup directories skipped (due to no file system changes or no recursion), and to add a slash to the end of the directory name during the match process. - Implement Jamie ffolliott patch to dird_conf.c that enables Multiple Connections and fixes a typo in show. The rest of his patch awaits my suggested changes. 05Dec04 - Implement run command in Python 04Dec04 - Implement conversion of the manual, and some minor tweaks to the script tags. - Apply a patch supplied by Preben 'Peppe' Guldberg that implements ignore case in wild cards and regexes. - Fix a truncated line in the above patch due to my cut and paste. 03Dec04 - Fix it so that the InChanger flag is only changed for Volumes in the same Pool. - Add PIDOF configuration path and apply to bacula.in - Add user supplied patch to add inet_aton() of old Solaris systems. - Require pools to match before allowing multiple simultaneous accesses to same storage resource. - Add patch supplied by Martin to correct buffer overrun in bsnprintf() with no library snprintf(). 02Dec04 - Apply user supplied patch that implements No Hard Links. - Document Python interface - Add hardlink keyword patch supplied by David R Bosso 01Dec04 - Fix non-python prototypes in dummy routines. - Add python 2.3 to config search list (user submitted patch) - Add JobStatus to Python variables. 28Nov04 - Add "python restart" command in Console. - Make built-in variables table driven. - First cut of Python Events for Bacula. Director only. StartJob, EndJob, NewVolume events. Version 1.36.1 Released 26Nov04: 24Nov04 - Take Dan's fix to the fix_postgresql_tables (thanks Dan) - Increase Maximum Concurrent Jobs to 20 in SD and FD! - Fix improper handling of autochanger Volumes that are not marked InChanger. Bug 170. 22Nov04 - Update authentication failure message to indicate possible problem with Maximum Concurrent Jobs. Add to doc too. - Commit PostgreSQL BIGINT fix -- apparently some people didn't get it. - Do not use a slot unless it is InChanger in the autochanger code, otherwise autochanger gets upset not finding the Volume. Bug 170 (need fix above too). 21Nov04 - Make authentication timeout compile time configurable. The value is set in src/baconfig.h - Fix removing items from watchdog queue, which apparently screwed up if there was more than one item. - Rework mediaformat part of manual to separate out old tape format for easier reading. - Add a lot of debug code to the authentication code. - Add seconds to the start/end times printed in the job report. 19Nov04 - Fix mutex deadlock in dequeue of messages. - Add debug code to FD authorization. 18Nov04 - Increase authentication timeouts to 10 minutes. 15Nov04 - Fix cancel bug in FD on /lib/tls with zero pid in pthread_kill. - Add date/time to all messages. - Make Qmsg use time message was queued rather than time printed. - Indent job output two spaces. 13Nov04 - Fix web page links for new manual. - Grant postgresql permission to cdimages. - Correct crash after "list nextvol" "list media" bug 160 12Nov04 - Fix scripts/Makefile.in missing ;\ -- thanks Martin - A bit of work on btape to keep if from going into infinite loops when things do not work well, and to print a bit better info. 11Nov04 - JobDefs Storage resource completely overrode anything specified in Job resource -- bug 159 -- fixed. - Fix syntax of renaming postgresql per Dan. - Add working_directory to be /tmp for wx_console. 10Nov04 - Allow both a JobId and a filename or list of files to be specified on a restore command line. - Save old mtx-changer before installing new one: bug 156 - Fix errors in CDROM file pointed out by Scott. 09Nov04 - Fix exepath when Bacula executed without path. - Move test for socket libraries for Solaris in configure.in before tcp wrapper tests so that linking works. - Add "make copy-static-fd" to makefile in CDROM file to copy existing static fd to CDROM rather than building it. 08Nov04 - More doc updates - Fix ps command for OpenBSD - Rework the creation of indexes for SQL -- fall back to the old code, but document what can be added. 06Nov04 - Add new Daemon message handler in default DIR conf. 05Nov04 - Fix Seg Fault with -D100 in bpipe.c. - Fix Seg Fault in run specifying a JobId. - Make mail from daemon with a Messages Resource use the MailCommand with editing rather than the default sendmail. - Replace Jmsg in dispatch_message() with Qmsg. - Make edit_job_codes handle NULL jcr. 04Nov04 - Add M_ALERT class and put tape alerts into it. - Fix Verify count vs found by not double counting files that are split across files/Volumes. 30Oct04 - Fix count returned from write_bsr_file() to handle multiple volumes. This fixes most cases of the Verify VolumeToCatalog. - Cleanup a bit the make clean for the rescue cdrom and remove unneeded files from the CVS. 28Oct04 - Fixed acquiring a tape so that it does not block all acquires when operator intervention is needed. - Platform build script updates from Scott - Doc updates - Add patch to force Linux LD_ASSUME_KERNEL to avoid using the new /lib/tls. This is done in the startup scripts. - Modify mtx-changer so that it checks for ONLINE while waiting. - Modify make_postgresql_tables.in so that EndBlock is stored as a bigint. Prevents job failures when a disk volume is larger than 2GB. 24Oct04 - Add grep ONLINE to wait_for_drive() in mtx-changer.in - More doc. - Rebuild Scott's new configure