#!/bin/sh
#
# This is Arno's test.  It uses two pools, two tapes, and
#  an autochanger. Note, the Director has three Pools in its 
#  conf:  Default, Full, and Inc.  Default is used in the
#  NightlySave job by default.  What is backed up is what
#  is in /tmp/file-list, which is by default the Bacula
#  source code (i.e. the build directory).
#
debug=1
if test "$debug" -eq 1 ; then
  out="tee"
else
  out="output"
fi
cwd=`pwd`
scripts/cleanup
scripts/copy-2tape-confs
scripts/prepare-two-tapes
 
# Make a relatively large backup set 50 x source code directory
echo "${cwd}/build" >/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list
echo "${cwd}/build" >>/tmp/file-list

echo " "
echo " "
echo " === Starting Two Pool Tape test at `date +%R:%S` ==="
echo " === Starting Two Pool Tape test at `date +%R:%S` ===" >>working/log
echo " "
# Write out bconsole commands to a file
cat <<END_OF_DATA >tmp/bconcmds
@$out /dev/null
messages
@$out tmp/log1.out
label storage=DDS-4 volume=TestVolume001 slot=1 pool=Full drive=0
label storage=DDS-4 volume=TestVolume002 slot=2 pool=Default drive=0
run job=NightlySave level=Full pool=Default yes
@# wait between starting jobs
@sleep 60
@#setdebug level=100 storage=DDS-4
run job=NightlySave level=Full pool=Full yes
@sleep 10
messages
@sleep 10
messages
@sleep 10
status storage=DDS-4
messages
wait
messages
@# 
@# now do a restore
@#
@$out tmp/log2.out
restore where=${cwd}/tmp/bacula-restores select all storage=DDS-4 done
yes
wait
messages
@$out
quit
END_OF_DATA

# start Bacula and run bconsole commands
if test "$debug" -eq 1 ; then
  bin/bacula start
  cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
else
  bin/bacula start 2>&1 >/dev/null
  cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf  2>&1 >/dev/null
fi
# Make sure no jobs are still running (debug check)
scripts/check_for_zombie_jobs storage=DDS-4

# stop Bacula
bin/bacula stop 2>&1 >/dev/null
# Check if backup done correctly
grep "^  Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
bstat=$?
grep "^  Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
rstat=$?
diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
if [ $? != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
   echo " "
   echo " "
   echo "  !!!!! Two Pool Tape test Bacula source failed!!! !!!!! "
   echo "  !!!!! Two Pool Tape test failed!!! !!!!! " >>test.out
   echo " "
else
   echo "  ===== Two Pool Tape test Bacula source OK ===== "
   echo "  ===== Two Pool Tape test OK ===== " >>test.out
#  scripts/cleanup
fi