# script for str9
# jtag speed. We need to stick to 16kHz until we've finished reset.
jtag_rclk 16
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 8 0x1 0x1 0xfe
jtag_device 4 0x1 0xf 0xe
jtag_device 5 0x1 0x1 0x1e
target create target0 arm966e -endian little -chain-position 1 -variant arm966e
[new_target_name] configure -event reset-start { jtag_rclk 16 }
[new_target_name] configure -event reset-init {
# We can increase speed now that we know the target is halted.
jtag_rclk 3000
# -- Enable 96K RAM
# PFQBC enabled / DTCM & AHB wait-states disabled
mww 0x5C002034 0x0191
str9x flash_config 0 4 2 0 0x80000
flash protect 0 0 7 off
}
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank str9x 0 0
flash bank str9x 0x00000000 0x00080000 0 0 0
flash bank str9x 0x00080000 0x00008000 0 0 0
# For more information about the configuration files, take a look at:
# openocd.texi