ITS#6036 zero out freed val

[openldap] / configure.in

diff --git a/configure.in b/configure.in
index a61aa38e734d3c4a3fac682c089f348cb7eb0fee..80975b82649e3e326a54555c4d49c9d044b96c1f 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -1,7 +1,7 @@
 dnl $OpenLDAP$
 dnl This work is part of OpenLDAP Software <http://www.openldap.org/>.
 dnl
 dnl $OpenLDAP$
 dnl This work is part of OpenLDAP Software <http://www.openldap.org/>.
 dnl

-dnl Copyright 1998-2007 The OpenLDAP Foundation.
+dnl Copyright 1998-2009 The OpenLDAP Foundation.

 dnl All rights reserved.
 dnl
 dnl Redistribution and use in source and binary forms, with or without
 dnl All rights reserved.
 dnl
 dnl Redistribution and use in source and binary forms, with or without


@@ -23,7 +23,7 @@ define([AC_LIBTOOL_LANG_F77_CONFIG], [:])dnl
 define([AC_LIBTOOL_LANG_GCJ_CONFIG], [:])dnl
 dnl ================================================================
 dnl Configure.in for OpenLDAP
 define([AC_LIBTOOL_LANG_GCJ_CONFIG], [:])dnl
 dnl ================================================================
 dnl Configure.in for OpenLDAP

-AC_COPYRIGHT([[Copyright 1998-2007 The OpenLDAP Foundation. All rights reserved.
+AC_COPYRIGHT([[Copyright 1998-2009 The OpenLDAP Foundation. All rights reserved.

 Restrictions apply, see COPYRIGHT and LICENSE files.]])
 AC_REVISION([$OpenLDAP$])
 AC_INIT([OpenLDAP],,[http://www.openldap.org/its/])
 Restrictions apply, see COPYRIGHT and LICENSE files.]])
 AC_REVISION([$OpenLDAP$])
 AC_INIT([OpenLDAP],,[http://www.openldap.org/its/])


@@ -96,7 +96,7 @@ AH_TOP([
 /* begin of portable.h.pre */
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
 /* begin of portable.h.pre */
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *

- * Copyright 1998-2007 The OpenLDAP Foundation
+ * Copyright 1998-2009 The OpenLDAP Foundation

  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without


@@ -242,6 +242,8 @@ OL_ARG_WITH(cyrus_sasl,[  --with-cyrus-sasl   with Cyrus SASL support],
        auto, [auto yes no] )
 OL_ARG_WITH(fetch,[  --with-fetch                with fetch(3) URL support],
        auto, [auto yes no] )
        auto, [auto yes no] )
 OL_ARG_WITH(fetch,[  --with-fetch                with fetch(3) URL support],
        auto, [auto yes no] )

+OL_ARG_WITH(gssapi,[  --with-gssapi              with GSSAPI support],
+       auto, [auto yes no] )

 OL_ARG_WITH(threads,[  --with-threads    with threads],
        auto, [auto nt posix mach pth lwp yes no manual] )
 OL_ARG_WITH(tls,[  --with-tls            with TLS/SSL support auto|openssl|gnutls],
 OL_ARG_WITH(threads,[  --with-threads    with threads],
        auto, [auto nt posix mach pth lwp yes no manual] )
 OL_ARG_WITH(tls,[  --with-tls            with TLS/SSL support auto|openssl|gnutls],


@@ -253,8 +255,8 @@ OL_ARG_WITH(mp,
        [  --with-mp               with multiple precision statistics auto|longlong|long|bignum|gmp],
        auto, [auto longlong long bignum gmp yes no])
 OL_ARG_WITH(odbc,
        [  --with-mp               with multiple precision statistics auto|longlong|long|bignum|gmp],
        auto, [auto longlong long bignum gmp yes no])
 OL_ARG_WITH(odbc,

-       [  --with-odbc             with specific ODBC support iodbc|unixodbc|auto],
-       auto, [auto iodbc unixodbc] )
+       [  --with-odbc             with specific ODBC support iodbc|unixodbc|odbc32|auto],
+       auto, [auto iodbc unixodbc odbc32] )

 
 dnl ----------------------------------------------------------------
 dnl Server options
 
 dnl ----------------------------------------------------------------
 dnl Server options


@@ -286,6 +288,7 @@ Backends="bdb \
        ldap \
        meta \
        monitor \
        ldap \
        meta \
        monitor \

+       ndb \

        null \
        passwd \
        perl \
        null \
        passwd \
        perl \


@@ -300,7 +303,7 @@ SLAPD Backend Options:])
 OL_ARG_ENABLE(backends,[    --enable-backends    enable all available backends],
        --, [no yes mod])dnl
 OL_ARG_ENABLE(bdb,[    --enable-bdb      enable Berkeley DB backend],
 OL_ARG_ENABLE(backends,[    --enable-backends    enable all available backends],
        --, [no yes mod])dnl
 OL_ARG_ENABLE(bdb,[    --enable-bdb      enable Berkeley DB backend],

-       yes, [no yes mod], ol_enable_backends)dnl
+       no, [no yes mod], ol_enable_backends)dnl

 OL_ARG_ENABLE(dnssrv,[    --enable-dnssrv        enable dnssrv backend],
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(hdb,[    --enable-hdb      enable Hierarchical DB backend],
 OL_ARG_ENABLE(dnssrv,[    --enable-dnssrv        enable dnssrv backend],
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(hdb,[    --enable-hdb      enable Hierarchical DB backend],


@@ -311,6 +314,8 @@ OL_ARG_ENABLE(meta,[    --enable-meta         enable metadirectory backend],
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(monitor,[    --enable-monitor      enable monitor backend],
        yes, [no yes mod], ol_enable_backends)dnl
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(monitor,[    --enable-monitor      enable monitor backend],
        yes, [no yes mod], ol_enable_backends)dnl

+OL_ARG_ENABLE(ndb,[    --enable-ndb      enable MySQL NDB Cluster backend],
+       no, [no yes mod], ol_enable_backends)dnl

 OL_ARG_ENABLE(null,[    --enable-null    enable null backend],
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(passwd,[    --enable-passwd        enable passwd backend],
 OL_ARG_ENABLE(null,[    --enable-null    enable null backend],
        no, [no yes mod], ol_enable_backends)dnl
 OL_ARG_ENABLE(passwd,[    --enable-passwd        enable passwd backend],


@@ -330,8 +335,10 @@ dnl ----------------------------------------------------------------
 dnl SLAPD Overlay Options
 Overlays="accesslog \
        auditlog \
 dnl SLAPD Overlay Options
 Overlays="accesslog \
        auditlog \

+       collect \

        constraint \
        dds \
        constraint \
        dds \

+       deref \

        dyngroup \
        dynlist \
        memberof \
        dyngroup \
        dynlist \
        memberof \


@@ -355,10 +362,14 @@ OL_ARG_ENABLE(accesslog,[    --enable-accesslog     In-Directory Access Logging ov
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(auditlog,[    --enable-auditlog    Audit Logging overlay],
        no, [no yes mod], ol_enable_overlays)
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(auditlog,[    --enable-auditlog    Audit Logging overlay],
        no, [no yes mod], ol_enable_overlays)

+OL_ARG_ENABLE(collect,[    --enable-collect      Collect overlay],
+       no, [no yes mod], ol_enable_overlays)

 OL_ARG_ENABLE(constraint,[    --enable-constraint        Attribute Constraint overlay],
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(dds,[    --enable-dds      Dynamic Directory Services overlay],
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(constraint,[    --enable-constraint        Attribute Constraint overlay],
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(dds,[    --enable-dds      Dynamic Directory Services overlay],
        no, [no yes mod], ol_enable_overlays)

+OL_ARG_ENABLE(deref,[    --enable-deref          Dereference overlay],
+       no, [no yes mod], ol_enable_overlays)

 OL_ARG_ENABLE(dyngroup,[    --enable-dyngroup    Dynamic Group overlay],
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(dynlist,[    --enable-dynlist      Dynamic List overlay],
 OL_ARG_ENABLE(dyngroup,[    --enable-dyngroup    Dynamic Group overlay],
        no, [no yes mod], ol_enable_overlays)
 OL_ARG_ENABLE(dynlist,[    --enable-dynlist      Dynamic List overlay],


@@ -460,6 +471,7 @@ elif test $ol_enable_modules != yes &&
        test $ol_enable_ldap = no &&
        test $ol_enable_meta = no &&
        test $ol_enable_monitor = no &&
        test $ol_enable_ldap = no &&
        test $ol_enable_meta = no &&
        test $ol_enable_monitor = no &&

+       test $ol_enable_ndb = no &&

        test $ol_enable_null = no &&
        test $ol_enable_passwd = no &&
        test $ol_enable_perl = no &&
        test $ol_enable_null = no &&
        test $ol_enable_passwd = no &&
        test $ol_enable_perl = no &&


@@ -500,6 +512,8 @@ dnl ----------------------------------------------------------------
 dnl Initialize vars
 LDAP_LIBS=
 BDB_LIBS=
 dnl Initialize vars
 LDAP_LIBS=
 BDB_LIBS=

+SLAPD_NDB_LIBS=
+SLAPD_NDB_INCS=

 LTHREAD_LIBS=
 LUTIL_LIBS=
 
 LTHREAD_LIBS=
 LUTIL_LIBS=
 


@@ -518,6 +532,7 @@ BUILD_HDB=no
 BUILD_LDAP=no
 BUILD_META=no
 BUILD_MONITOR=no
 BUILD_LDAP=no
 BUILD_META=no
 BUILD_MONITOR=no

+BUILD_NDB=no

 BUILD_NULL=no
 BUILD_PASSWD=no
 BUILD_PERL=no
 BUILD_NULL=no
 BUILD_PASSWD=no
 BUILD_PERL=no


@@ -566,6 +581,7 @@ SLAPD_SQL_INCLUDES=
 KRB4_LIBS=
 KRB5_LIBS=
 SASL_LIBS=
 KRB4_LIBS=
 KRB5_LIBS=
 SASL_LIBS=

+GSSAPI_LIBS=

 TLS_LIBS=
 MODULES_LIBS=
 SLAPI_LIBS=
 TLS_LIBS=
 MODULES_LIBS=
 SLAPI_LIBS=


@@ -675,12 +691,14 @@ if test $ol_enable_perl != no ; then
 fi
 
 AC_PROG_CPP
 fi
 
 AC_PROG_CPP

+OL_MSVC

 
 dnl ----------------------------------------------------------------
 dnl Checks for Windows NT
 case $host_os in
   *mingw32* ) ac_cv_mingw32=yes ;;
   *cygwin* ) ac_cv_cygwin=yes ;;
 
 dnl ----------------------------------------------------------------
 dnl Checks for Windows NT
 case $host_os in
   *mingw32* ) ac_cv_mingw32=yes ;;
   *cygwin* ) ac_cv_cygwin=yes ;;

+  *interix* ) ac_cv_interix=yes ;;

 esac
 
 dnl ----------------------------------------------------------------
 esac
 
 dnl ----------------------------------------------------------------


@@ -826,7 +844,10 @@ AC_CHECK_HEADERS(  \
 )
 
 dnl Only check Winsock on MinGW
 )
 
 dnl Only check Winsock on MinGW

-if test "$ac_cv_mingw32" = yes ; then
+if test "$ac_cv_mingw32" = yes \
+       -o "$ac_cv_interix" = yes \
+       -o "$ol_cv_msvc" = yes
+then

        AC_CHECK_HEADERS( winsock.h winsock2.h )
 fi
 
        AC_CHECK_HEADERS( winsock.h winsock2.h )
 fi
 


@@ -858,37 +879,48 @@ if test $ac_cv_func_sigaction = no && test $ac_cv_func_sigaction = no ; then
        AC_CHECK_LIB(V3, sigset)
 fi
 
        AC_CHECK_LIB(V3, sigset)
 fi
 

+if test $ol_cv_msvc ; then
+   ol_cv_winsock=yes
+fi
+

 dnl The following is INTENTIONALLY scripted out because shell does not
 dnl support variable names with the '@' character, which is what
 dnl autoconf would try to generate if one merely used AC_SEARCH_LIBS
 if test "$ac_cv_header_winsock_h" = yes; then
 dnl The following is INTENTIONALLY scripted out because shell does not
 dnl support variable names with the '@' character, which is what
 dnl autoconf would try to generate if one merely used AC_SEARCH_LIBS
 if test "$ac_cv_header_winsock_h" = yes; then

-AC_CACHE_CHECK([for winsock], [ol_cv_winsock],
-save_LIBS="$LIBS"
-for curlib in ws2_32 wsock32; do
-       LIBS="$LIBS -l$curlib"
-       AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <winsock.h>
+       AC_CACHE_CHECK([for winsock], [ol_cv_winsock],[
+       save_LIBS="$LIBS"
+       for curlib in none ws2_32 wsock32; do
+               if test curlib != none ; then
+               LIBS="$save_LIBS -l$curlib"
+               fi
+               AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <winsock.h>

                        ]], [[
                        socket(0,0,0);
                        select(0,NULL,NULL,NULL,NULL);
                        closesocket(0);
                        gethostname(NULL,0);
                        ]], [[
                        socket(0,0,0);
                        select(0,NULL,NULL,NULL,NULL);
                        closesocket(0);
                        gethostname(NULL,0);

-                       ]])],[ol_cv_winsock=yes],[ol_cv_winsock=no])
-
-       if test $ol_cv_winsock = yes; then
-               AC_DEFINE(HAVE_WINSOCK, 1, [define if you have winsock])
-               ac_cv_func_socket=yes
-               ac_cv_func_select=yes
-               ac_cv_func_closesocket=yes
-               ac_cv_func_gethostname=yes
-               if test $curlib = ws2_32; then
-                       ol_cv_winsock=winsock2
-                       AC_DEFINE(HAVE_WINSOCK2, 1,
-                                 [define if you have winsock2])
+                       ]])],[ol_cv_winsock=$curlib],[ol_cv_winsock=no])
+
+               test "$ol_cv_winsock" != no && break
+       done
+       LIBS="$save_LIBS"
+       ])
+
+       if test $ol_cv_winsock != no ; then
+       AC_DEFINE(HAVE_WINSOCK, 1, [define if you have winsock])
+       ac_cv_func_socket=yes
+       ac_cv_func_select=yes
+       ac_cv_func_closesocket=yes
+       ac_cv_func_gethostname=yes
+
+               if test $ol_cv_winsock != none -a $ol_cv_winsock != yes ; then
+               LIBS="$LIBS -l$ol_cv_winsock"

                fi
                fi

-               break
+
+       if test $ol_cv_winsock = ws2_32 -o $ol_cv_winsock = yes ; then
+                       AC_DEFINE(HAVE_WINSOCK2, 1, [define if you have winsock2])
+       fi

        fi
        fi

-       LIBS="$save_LIBS"
-done)

 fi
 
 dnl Find socket()
 fi
 
 dnl Find socket()


@@ -953,7 +985,6 @@ then
 fi
 
 dnl ----------------------------------------------------------------
 fi
 
 dnl ----------------------------------------------------------------

-# strerror checks

 OL_STRERROR
 
 dnl ----------------------------------------------------------------
 OL_STRERROR
 
 dnl ----------------------------------------------------------------


@@ -981,12 +1012,14 @@ dnl UUID Support
 
 have_uuid=no
 AC_CHECK_HEADERS(sys/uuid.h)
 
 have_uuid=no
 AC_CHECK_HEADERS(sys/uuid.h)

+dnl The HAVE_UUID_TO_STR code path also needs uuid_create

 if test $ac_cv_header_sys_uuid_h = yes ; then
        save_LIBS="$LIBS"
        AC_SEARCH_LIBS([uuid_to_str], [uuid], [have_uuid=yes], :)
 if test $ac_cv_header_sys_uuid_h = yes ; then
        save_LIBS="$LIBS"
        AC_SEARCH_LIBS([uuid_to_str], [uuid], [have_uuid=yes], :)

+       AC_SEARCH_LIBS([uuid_create], [uuid], :, [have_uuid=no])

        LIBS="$save_LIBS"
 
        LIBS="$save_LIBS"
 

-       if test have_uuid = yes ; then
+       if test $have_uuid = yes ; then

                AC_DEFINE(HAVE_UUID_TO_STR,1,
                        [define if you have uuid_to_str()])
 
                AC_DEFINE(HAVE_UUID_TO_STR,1,
                        [define if you have uuid_to_str()])
 


@@ -996,14 +1029,16 @@ if test $ac_cv_header_sys_uuid_h = yes ; then
 fi
 
 dnl Look for uuid_generate
 fi
 
 dnl Look for uuid_generate

+dnl The HAVE_UUID_GENERATE code path also needs uuid_unparse_lower

 if test $have_uuid = no ; then
        AC_CHECK_HEADERS(uuid/uuid.h)
        if test $ac_cv_header_uuid_uuid_h = yes ; then
                save_LIBS="$LIBS"
                AC_SEARCH_LIBS([uuid_generate], [uuid], [have_uuid=yes], :)
 if test $have_uuid = no ; then
        AC_CHECK_HEADERS(uuid/uuid.h)
        if test $ac_cv_header_uuid_uuid_h = yes ; then
                save_LIBS="$LIBS"
                AC_SEARCH_LIBS([uuid_generate], [uuid], [have_uuid=yes], :)

+               AC_SEARCH_LIBS([uuid_unparse_lower], [uuid], :, [have_uuid=no])

                LIBS="$save_LIBS"
 
                LIBS="$save_LIBS"
 

-               if test have_uuid = yes ; then
+               if test $have_uuid = yes ; then

                        AC_DEFINE(HAVE_UUID_GENERATE,1,
                                [define if you have uuid_generate()])
 
                        AC_DEFINE(HAVE_UUID_GENERATE,1,
                                [define if you have uuid_generate()])
 


@@ -1110,6 +1145,63 @@ if test $ol_enable_local != no ; then
        fi
 fi
 
        fi
 fi
 

+dnl ----------------------------------------------------------------
+dnl GSSAPI
+ol_link_gssapi=no
+
+case $ol_with_gssapi in yes | auto)
+
+       ol_header_gssapi=no
+       AC_CHECK_HEADERS(gssapi/gssapi.h)
+       if test $ac_cv_header_gssapi_gssapi_h = yes ; then
+               ol_header_gssapi=yes
+       else
+               AC_CHECK_HEADERS(gssapi.h)
+               if test $ac_cv_header_gssapi_h = yes ; then
+                       ol_header_gssapi=yes
+               fi
+
+               dnl## not every gssapi has gss_oid_to_str()
+               dnl## as it's not defined in the GSSAPI V2 API
+               dnl## anymore
+               saveLIBS="$LIBS"
+               LIBS="$LIBS $GSSAPI_LIBS"
+               AC_CHECK_FUNCS(gss_oid_to_str)
+               LIBS="$saveLIBS"
+       fi
+
+       if test $ol_header_gssapi = yes ; then
+               dnl## we check for gss_wrap
+               dnl## as it's new to the GSSAPI V2 API
+               AC_CHECK_LIB(gssapi, gss_wrap,
+                            [ol_link_gssapi=yes;GSSAPI_LIBS="-lgssapi"],
+                            [ol_link_gssapi=no])
+               if test $ol_link_gssapi != yes ; then
+                       AC_CHECK_LIB(gssapi_krb5, gss_wrap,
+                                    [ol_link_gssapi=yes;GSSAPI_LIBS="-lgssapi_krb5"],
+                                    [ol_link_gssapi=no])
+               fi
+               if test $ol_link_gssapi != yes ; then
+                       AC_CHECK_LIB(gss, gss_wrap,
+                                    [ol_link_gssapi=yes;GSSAPI_LIBS="-lgss"],
+                                    [ol_link_gssapi=no])
+               fi
+       fi
+
+       ;;
+esac
+
+WITH_GSSAPI=no
+if test $ol_link_gssapi = yes; then
+       AC_DEFINE(HAVE_GSSAPI, 1, [define if you have GSSAPI])
+       WITH_GSSAPI=yes
+elif test $ol_with_gssapi = auto ; then
+       AC_MSG_WARN([Could not locate GSSAPI package])
+       AC_MSG_WARN([GSSAPI authentication not supported!])
+elif test $ol_with_gssapi = yes ; then
+       AC_MSG_ERROR([GSSAPI detection failed])
+fi
+

 dnl ----------------------------------------------------------------
 dnl TLS/SSL
        
 dnl ----------------------------------------------------------------
 dnl TLS/SSL
        


@@ -1840,12 +1932,6 @@ if test $ol_enable_bdb/$ol_enable_hdb != no/no; then
                BDB_LIBS="$BDB_LIBS $ol_cv_lib_db"
        fi
 
                BDB_LIBS="$BDB_LIBS $ol_cv_lib_db"
        fi
 

-       OL_BDB_COMPAT
-
-       if test $ol_cv_bdb_compat != yes ; then
-               AC_MSG_ERROR([BDB/HDB: BerkeleyDB version incompatible])
-       fi
-

        SLAPD_LIBS="$SLAPD_LIBS \$(BDB_LIBS)"
 
        ol_link_bdb=yes 
        SLAPD_LIBS="$SLAPD_LIBS \$(BDB_LIBS)"
 
        ol_link_bdb=yes 


@@ -1929,7 +2015,7 @@ if test $ol_enable_sql != no ; then
        LIBS="$LTHREAD_LIBS"
 
        if test $ol_with_odbc = auto ; then
        LIBS="$LTHREAD_LIBS"
 
        if test $ol_with_odbc = auto ; then

-               ol_with_odbc="iodbc unixodbc"
+               ol_with_odbc="iodbc unixodbc odbc32"

        fi
 
        for odbc in $ol_with_odbc ; do
        fi
 
        for odbc in $ol_with_odbc ; do


@@ -1949,6 +2035,13 @@ if test $ol_enable_sql != no ; then
                                fi
                                ;;
 
                                fi
                                ;;
 

+                       odbc32)
+                               AC_CHECK_LIB(odbc32, SQLDriverConnect, [have_odbc32=yes], [have_odbc32=no])
+                               if test $have_odbc32 = yes ; then
+                                       ol_link_sql="-lodbc32"
+                               fi
+                               ;;
+

                        *)
                                AC_MSG_ERROR([unknown ODBC library])
                                ;;
                        *)
                                AC_MSG_ERROR([unknown ODBC library])
                                ;;


@@ -1966,6 +2059,47 @@ if test $ol_enable_sql != no ; then
        fi
 fi
 
        fi
 fi
 

+dnl ----------------------------------------------------------------
+dnl MySQL NDBapi
+dnl Note: uses C++, but we don't want to add C++ test overhead to
+dnl the rest of the libtool machinery.
+ol_link_ndb=no
+if test $ol_enable_ndb != no ; then
+       AC_CHECK_PROG(MYSQL,mysql_config,yes)
+       if test "$MYSQL" != yes ; then
+               AC_MSG_ERROR([could not locate mysql_config])
+       fi
+
+       SQL_INC=`mysql_config --include`
+       SLAPD_NDB_INCS="$SQL_INC $SQL_INC/storage/ndb $SQL_INC/storage/ndb/ndbapi"
+
+       save_CPPFLAGS="$CPPFLAGS"
+       CPPFLAGS="$SLAPD_NDB_INCS"
+       AC_MSG_CHECKING(for NdbApi.hpp)
+       AC_PREPROC_IFELSE(
+               [AC_LANG_SOURCE([[#include <NdbApi.hpp>]])],
+                       AC_MSG_RESULT(yes),
+                       AC_MSG_ERROR([could not locate NdbApi headers])
+       )
+       CPPFLAGS="$save_CPPFLAGS"
+
+       SQL_LIB=`mysql_config --libs_r`
+       SLAPD_NDB_LIBS="$SQL_LIB -lndbclient -lstdc++"
+
+       save_LDFLAGS="$LDFLAGS"
+       save_LIBS="$LIBS"
+       LDFLAGS="$SQL_LIB"
+       AC_CHECK_LIB(ndbclient,ndb_init,[: ok],[
+               AC_MSG_ERROR([could not locate ndbclient library])
+       ],[-lstdc++])
+       LIBS="$save_LIBS"
+       LDFLAGS="$save_LDFLAGS"
+
+       if test "$ol_enable_ndb" = yes ; then
+               SLAPD_LIBS="$SLAPD_LIBS \$(SLAPD_NDB_LIBS)"
+       fi
+fi
+

 dnl ----------------------------------------------------------------
 dnl International Components for Unicode
 OL_ICU
 dnl ----------------------------------------------------------------
 dnl International Components for Unicode
 OL_ICU


@@ -2292,9 +2426,12 @@ AC_CHECK_FUNC(_snprintf, [ac_cv_func_snprintf=yes
        AC_DEFINE(snprintf, _snprintf, [define to snprintf routine])
 ])
 
        AC_DEFINE(snprintf, _snprintf, [define to snprintf routine])
 ])
 

-AC_CHECK_FUNC(_vsnprintf, [ac_cv_func_vsnprintf=yes
+AC_CHECK_FUNCS(vsnprintf _vsnprintf)
+
+if test $ac_cv_func_vsnprintf = no -a $ac_cv_func__vsnprintf = yes ; then
+       ac_cv_func_vsnprintf=yes

        AC_DEFINE(vsnprintf, _vsnprintf, [define to vsnprintf routine])
        AC_DEFINE(vsnprintf, _vsnprintf, [define to vsnprintf routine])

-])
+fi

 
 AC_FUNC_VPRINTF
 
 
 AC_FUNC_VPRINTF
 


@@ -2313,6 +2450,7 @@ AC_CHECK_FUNCS(                   \
        flock                   \
        fstat                   \
        getdtablesize           \
        flock                   \
        fstat                   \
        getdtablesize           \

+       geteuid                 \

        getgrgid                \
        gethostname             \
        getpass                 \
        getgrgid                \
        gethostname             \
        getpass                 \


@@ -2572,6 +2710,19 @@ if test "$ol_enable_meta" != no ; then
        AC_DEFINE_UNQUOTED(SLAPD_META,$MFLAG,[define to support LDAP Metadirectory backend])
 fi
 
        AC_DEFINE_UNQUOTED(SLAPD_META,$MFLAG,[define to support LDAP Metadirectory backend])
 fi
 

+if test "$ol_enable_ndb" != no ; then
+       BUILD_SLAPD=yes
+       BUILD_NDB=$ol_enable_ndb
+       if test "$ol_enable_ndb" = mod ; then
+               SLAPD_DYNAMIC_BACKENDS="$SLAPD_DYNAMIC_BACKENDS back-ndb"
+               MFLAG=SLAPD_MOD_DYNAMIC
+       else
+               SLAPD_STATIC_BACKENDS="$SLAPD_STATIC_BACKENDS back-ndb"
+               MFLAG=SLAPD_MOD_STATIC
+       fi
+       AC_DEFINE_UNQUOTED(SLAPD_NDB,$MFLAG,[define to support NDB backend])
+fi
+

 if test "$ol_enable_null" != no ; then
        BUILD_SLAPD=yes
        BUILD_NULL=$ol_enable_null
 if test "$ol_enable_null" != no ; then
        BUILD_SLAPD=yes
        BUILD_NULL=$ol_enable_null


@@ -2690,6 +2841,18 @@ if test "$ol_enable_auditlog" != no ; then
        AC_DEFINE_UNQUOTED(SLAPD_OVER_AUDITLOG,$MFLAG,[define for Audit Logging overlay])
 fi
 
        AC_DEFINE_UNQUOTED(SLAPD_OVER_AUDITLOG,$MFLAG,[define for Audit Logging overlay])
 fi
 

+if test "$ol_enable_collect" != no ; then
+        BUILD_COLLECT=$ol_enable_collect
+        if test "$ol_enable_collect" = mod ; then
+                MFLAG=SLAPD_MOD_DYNAMIC
+                SLAPD_DYNAMIC_OVERLAYS="$SLAPD_DYNAMIC_OVERLAYS collect.la"
+        else
+                MFLAG=SLAPD_MOD_STATIC
+                SLAPD_STATIC_OVERLAYS="$SLAPD_STATIC_OVERLAYS collect.o"
+        fi
+        AC_DEFINE_UNQUOTED(SLAPD_OVER_COLLECT,$MFLAG,[define for Collect overlay])
+fi
+

 if test "$ol_enable_constraint" != no ; then
        BUILD_CONSTRAINT=$ol_enable_constraint
        if test "$ol_enable_constraint" = mod ; then
 if test "$ol_enable_constraint" != no ; then
        BUILD_CONSTRAINT=$ol_enable_constraint
        if test "$ol_enable_constraint" = mod ; then


@@ -2714,6 +2877,18 @@ if test "$ol_enable_dds" != no ; then
        AC_DEFINE_UNQUOTED(SLAPD_OVER_DDS,$MFLAG,[define for Dynamic Directory Services overlay])
 fi
 
        AC_DEFINE_UNQUOTED(SLAPD_OVER_DDS,$MFLAG,[define for Dynamic Directory Services overlay])
 fi
 

+if test "$ol_enable_deref" != no ; then
+       BUILD_DDS=$ol_enable_deref
+       if test "$ol_enable_deref" = mod ; then
+               MFLAG=SLAPD_MOD_DYNAMIC
+               SLAPD_DYNAMIC_OVERLAYS="$SLAPD_DYNAMIC_OVERLAYS deref.la"
+       else
+               MFLAG=SLAPD_MOD_STATIC
+               SLAPD_STATIC_OVERLAYS="$SLAPD_STATIC_OVERLAYS deref.o"
+       fi
+       AC_DEFINE_UNQUOTED(SLAPD_OVER_DEREF,$MFLAG,[define for Dynamic Directory Services overlay])
+fi
+

 if test "$ol_enable_dyngroup" != no ; then
        BUILD_DYNGROUP=$ol_enable_dyngroup
        if test "$ol_enable_dyngroup" = mod ; then
 if test "$ol_enable_dyngroup" != no ; then
        BUILD_DYNGROUP=$ol_enable_dyngroup
        if test "$ol_enable_dyngroup" = mod ; then


@@ -2889,7 +3064,7 @@ dnl For Windows build, we don't want to include -dlopen flags.
 dnl They hurt more than they help.
 dnl
 
 dnl They hurt more than they help.
 dnl
 

-if test "$ac_cv_mingw32" = yes ; then
+if test "$ac_cv_mingw32" = yes -o $ol_cv_msvc = yes ; then

        PLAT=NT
        SLAPD_MODULES_LDFLAGS=
 else
        PLAT=NT
        SLAPD_MODULES_LDFLAGS=
 else


@@ -2916,6 +3091,7 @@ dnl backends
   AC_SUBST(BUILD_LDAP)
   AC_SUBST(BUILD_META)
   AC_SUBST(BUILD_MONITOR)
   AC_SUBST(BUILD_LDAP)
   AC_SUBST(BUILD_META)
   AC_SUBST(BUILD_MONITOR)

+  AC_SUBST(BUILD_NDB)

   AC_SUBST(BUILD_NULL)
   AC_SUBST(BUILD_PASSWD)
   AC_SUBST(BUILD_RELAY)
   AC_SUBST(BUILD_NULL)
   AC_SUBST(BUILD_PASSWD)
   AC_SUBST(BUILD_RELAY)


@@ -2926,6 +3102,7 @@ dnl backends
 dnl overlays
   AC_SUBST(BUILD_ACCESSLOG)
   AC_SUBST(BUILD_AUDITLOG)
 dnl overlays
   AC_SUBST(BUILD_ACCESSLOG)
   AC_SUBST(BUILD_AUDITLOG)

+  AC_SUBST(BUILD_COLLECT)

   AC_SUBST(BUILD_CONSTRAINT)
   AC_SUBST(BUILD_DDS)
   AC_SUBST(BUILD_DENYOP)
   AC_SUBST(BUILD_CONSTRAINT)
   AC_SUBST(BUILD_DDS)
   AC_SUBST(BUILD_DENYOP)


@@ -2947,6 +3124,8 @@ dnl overlays
 AC_SUBST(LDAP_LIBS)
 AC_SUBST(SLAPD_LIBS)
 AC_SUBST(BDB_LIBS)
 AC_SUBST(LDAP_LIBS)
 AC_SUBST(SLAPD_LIBS)
 AC_SUBST(BDB_LIBS)

+AC_SUBST(SLAPD_NDB_LIBS)
+AC_SUBST(SLAPD_NDB_INCS)

 AC_SUBST(LTHREAD_LIBS)
 AC_SUBST(LUTIL_LIBS)
 AC_SUBST(WRAP_LIBS)
 AC_SUBST(LTHREAD_LIBS)
 AC_SUBST(LUTIL_LIBS)
 AC_SUBST(WRAP_LIBS)


@@ -2967,6 +3146,7 @@ AC_SUBST(MOD_PERL_LDFLAGS)
 AC_SUBST(KRB4_LIBS)
 AC_SUBST(KRB5_LIBS)
 AC_SUBST(SASL_LIBS)
 AC_SUBST(KRB4_LIBS)
 AC_SUBST(KRB5_LIBS)
 AC_SUBST(SASL_LIBS)

+AC_SUBST(GSSAPI_LIBS)

 AC_SUBST(TLS_LIBS)
 AC_SUBST(MODULES_LIBS)
 AC_SUBST(SLAPI_LIBS)
 AC_SUBST(TLS_LIBS)
 AC_SUBST(MODULES_LIBS)
 AC_SUBST(SLAPI_LIBS)


@@ -3017,6 +3197,7 @@ AC_CONFIG_FILES([Makefile:build/top.mk:Makefile.in:build/dir.mk]
 [servers/slapd/back-ldif/Makefile:build/top.mk:servers/slapd/back-ldif/Makefile.in:build/mod.mk]
 [servers/slapd/back-meta/Makefile:build/top.mk:servers/slapd/back-meta/Makefile.in:build/mod.mk]
 [servers/slapd/back-monitor/Makefile:build/top.mk:servers/slapd/back-monitor/Makefile.in:build/mod.mk]
 [servers/slapd/back-ldif/Makefile:build/top.mk:servers/slapd/back-ldif/Makefile.in:build/mod.mk]
 [servers/slapd/back-meta/Makefile:build/top.mk:servers/slapd/back-meta/Makefile.in:build/mod.mk]
 [servers/slapd/back-monitor/Makefile:build/top.mk:servers/slapd/back-monitor/Makefile.in:build/mod.mk]

+[servers/slapd/back-ndb/Makefile:build/top.mk:servers/slapd/back-ndb/Makefile.in:build/mod.mk]

 [servers/slapd/back-null/Makefile:build/top.mk:servers/slapd/back-null/Makefile.in:build/mod.mk]
 [servers/slapd/back-passwd/Makefile:build/top.mk:servers/slapd/back-passwd/Makefile.in:build/mod.mk]
 [servers/slapd/back-perl/Makefile:build/top.mk:servers/slapd/back-perl/Makefile.in:build/mod.mk]
 [servers/slapd/back-null/Makefile:build/top.mk:servers/slapd/back-null/Makefile.in:build/mod.mk]
 [servers/slapd/back-passwd/Makefile:build/top.mk:servers/slapd/back-passwd/Makefile.in:build/mod.mk]
 [servers/slapd/back-perl/Makefile:build/top.mk:servers/slapd/back-perl/Makefile.in:build/mod.mk]


@@ -3040,7 +3221,7 @@ rm -f $BACKENDSC
 cat > $BACKENDSC << ENDX
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
 cat > $BACKENDSC << ENDX
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *

- * Copyright 1998-2007 The OpenLDAP Foundation.
+ * Copyright 1998-2009 The OpenLDAP Foundation.

  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without


@@ -3091,7 +3272,7 @@ rm -f $OVERLAYSC
 cat > $OVERLAYSC << ENDX
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *
 cat > $OVERLAYSC << ENDX
 /* This work is part of OpenLDAP Software <http://www.openldap.org/>.
  *

- * Copyright 1998-2007 The OpenLDAP Foundation.
+ * Copyright 1998-2009 The OpenLDAP Foundation.

  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without