-static int general_socket;
-
-static const char *wlan_interface;
-static const char *eth_interface;
-static char *wmii_path;
-static const char *time_format;
-static const char *battery_path;
-static bool use_colors;
-static bool get_ethspeed;
-static const char *wmii_normcolors = "#222222 #333333";
-static char order[MAX_ORDER][2];
-static const char **run_watches;
-static unsigned int num_run_watches;
-static unsigned int interval = 1;
-
-/*
- * This function just concats two strings in place, it should only be used
- * for concatting order to the name of a file or concatting color codes.
- * Otherwise, the buffer size would have to be increased.
- *
- */
-static char *concat(const char *str1, const char *str2) {
- static char concatbuf[32];
- (void)snprintf(concatbuf, sizeof(concatbuf), "%s%s", str1, str2);
- return concatbuf;
-}
-
-/*
- * Returns the correct color format for dzen (^fg(color)) or wmii (color <normcolors>)
- *
- */
-static char *color(const char *colorstr) {
- static char colorbuf[32];
-#ifdef DZEN
- (void)snprintf(colorbuf, sizeof(colorbuf), "^fg(%s)", colorstr);
-#else
- (void)snprintf(colorbuf, sizeof(colorbuf), "%s %s ", colorstr, wmii_normcolors);
-#endif
- return colorbuf;
-}
-
-/*
- * Cleans wmii's /rbar directory by deleting all regular files
- *
- */
-static void cleanup_rbar_dir() {
-#ifdef DZEN
- return;
-#endif
- struct dirent *ent;
- DIR *dir;
- char pathbuf[strlen(wmii_path)+256+1];
-
- if ((dir = opendir(wmii_path)) == NULL)
- exit(EXIT_FAILURE);
-
- while ((ent = readdir(dir)) != NULL) {
- if (ent->d_type == DT_REG) {
- (void)snprintf(pathbuf, sizeof(pathbuf), "%s%s", wmii_path, ent->d_name);
- if (unlink(pathbuf) == -1)
- exit(EXIT_FAILURE);
- }
- }
-
- (void)closedir(dir);
-}
-
-/*
- * Creates the specified file in wmii's /rbar directory with
- * correct modes and initializes colors if colormode is enabled
- *
- */
-static void create_file(const char *name) {
-#ifdef DZEN
- return;
-#endif
- char pathbuf[strlen(wmii_path)+256+1];
- int fd;
- int flags = O_CREAT | O_WRONLY;
- struct stat statbuf;
-
- (void)snprintf(pathbuf, sizeof(pathbuf), "%s%s", wmii_path, name);
-
- /* Overwrite file's contents if it exists */
- if (stat(pathbuf, &statbuf) >= 0)
- flags |= O_TRUNC;
-
- if ((fd = open(pathbuf, flags, S_IRUSR | S_IWUSR)) < 0)
- exit(EXIT_FAILURE);
- if (use_colors) {
- char *tmp = color("#888888");
- if (write(fd, tmp, strlen(tmp)) != (ssize_t)strlen(tmp))
- exit(EXIT_FAILURE);
- }
- (void)close(fd);
-}
-
-/*
- * Waits until wmii_path/rbar exists (= the filesystem gets mounted),
- * cleans up all files and creates the needed files
- *
- */
-static void setup(void) {
- unsigned int i;
- char pathbuf[512];
-
-#ifndef DZEN
- struct stat statbuf;
- /* Wait until wmii_path/rbar exists */
- for (; stat(wmii_path, &statbuf) < 0; sleep(interval));
-#endif
-
- cleanup_rbar_dir();
- if (wlan_interface)
- create_file(concat(order[ORDER_WLAN],"wlan"));
- if (eth_interface)
- create_file(concat(order[ORDER_ETH],"eth"));
- if (battery_path)
- create_file(concat(order[ORDER_BATTERY],"battery"));
- create_file(concat(order[ORDER_LOAD],"load"));
- if (time_format)
- create_file(concat(order[ORDER_TIME],"time"));
- for (i = 0; i < num_run_watches; i += 2) {
- snprintf(pathbuf, sizeof(pathbuf), "%s%s", order[ORDER_RUN], run_watches[i]);
- create_file(pathbuf);
- }
-}
-
-/*
- * Writes the given message in the corresponding file in wmii's /rbar directory
- *
- */
-static void write_to_statusbar(const char *name, const char *message, bool final_entry) {
-#ifdef DZEN
- if (final_entry) {
- (void)printf("%s^p(6)\n", message);
- fflush(stdout);
- return;
- }
- (void)printf("%s" BAR, message);
- return;
-#endif
-
- char pathbuf[strlen(wmii_path)+256+1];
- int fd;
-
- (void)snprintf(pathbuf, sizeof(pathbuf), "%s%s", wmii_path, name);
- if ((fd = open(pathbuf, O_RDWR)) == -1) {
- /* Try to re-setup stuff and just continue */
- setup();
- return;
- }
- if (write(fd, message, strlen(message)) != (ssize_t)strlen(message))
- exit(EXIT_FAILURE);
- (void)close(fd);
-}
-
-/*
- * Writes an errormessage to statusbar
- *
- */
-static void write_error_to_statusbar(const char *message) {
- cleanup_rbar_dir();
- create_file("error");
- write_to_statusbar("error", message, true);
-}
-
-/*
- * Write errormessage to statusbar and exit
- *
- */
-void die(const char *fmt, ...) {
- if (wmii_path != NULL) {
- char buffer[512];
- va_list ap;
- va_start(ap, fmt);
- (void)vsnprintf(buffer, sizeof(buffer), fmt, ap);
- va_end(ap);
-
- write_error_to_statusbar(buffer);
- }
- exit(EXIT_FAILURE);
-}
-
-/*
- * Skip the given character for exactly 'amount' times, returns
- * a pointer to the first non-'character' character in 'input'.
- *
- */
-static char *skip_character(char *input, char character, int amount) {
- char *walk;
- size_t len = strlen(input);
- int blanks = 0;
-
- for (walk = input; ((size_t)(walk - input) < len) && (blanks < amount); walk++)
- if (*walk == character)
- blanks++;
-
- return (walk == input ? walk : walk-1);
-}
-
-/*
- * Get battery information from /sys. Note that it uses the design capacity to
- * calculate the percentage, not the last full capacity, so you can see how
- * worn off your battery is.
- *
- */
-static char *get_battery_info(const char *path) {
- char buf[1024];
- static char part[512];
- char *walk, *last;
- int fd;
- int full_design = -1,
- remaining = -1,
- present_rate = -1;
- charging_status_t status = CS_DISCHARGING;
-
- if ((fd = open(path, O_RDONLY)) == -1)
- return "No battery found";
-
- memset(part, 0, sizeof(part));
- (void)read(fd, buf, sizeof(buf));
- for (walk = buf, last = buf; (walk-buf) < 1024; walk++)
- if (*walk == '=') {
- if (BEGINS_WITH(last, "POWER_SUPPLY_ENERGY_FULL_DESIGN") ||
- BEGINS_WITH(last, "POWER_SUPPLY_CHARGE_FULL_DESIGN"))
- full_design = atoi(walk+1);
- else if (BEGINS_WITH(last, "POWER_SUPPLY_ENERGY_NOW") ||
- BEGINS_WITH(last, "POWER_SUPPLY_CHARGE_NOW"))
- remaining = atoi(walk+1);
- else if (BEGINS_WITH(last, "POWER_SUPPLY_CURRENT_NOW"))
- present_rate = atoi(walk+1);
- else if (BEGINS_WITH(last, "POWER_SUPPLY_STATUS=Charging"))
- status = CS_CHARGING;
- else if (BEGINS_WITH(last, "POWER_SUPPLY_STATUS=Full"))
- status = CS_FULL;
- } else if (*walk == '\n')
- last = walk+1;
- (void)close(fd);
-
- if ((full_design == 1) || (remaining == -1))
- return part;
-
- if (present_rate > 0) {
- float remaining_time;
- int seconds, hours, minutes;
- if (status == CS_CHARGING)
- remaining_time = ((float)full_design - (float)remaining) / (float)present_rate;
- else if (status == CS_DISCHARGING)
- remaining_time = ((float)remaining / (float)present_rate);
- else remaining_time = 0;
-
- seconds = (int)(remaining_time * 3600.0);
- hours = seconds / 3600;
- seconds -= (hours * 3600);
- minutes = seconds / 60;
- seconds -= (minutes * 60);
-
- (void)snprintf(part, sizeof(part), "%s %.02f%% %02d:%02d:%02d",
- (status == CS_CHARGING ? "CHR" :
- (status == CS_DISCHARGING ? "BAT" : "FULL")),
- (((float)remaining / (float)full_design) * 100),
- hours, minutes, seconds);
- } else {
- (void)snprintf(part, sizeof(part), "%s %.02f%%",
- (status == CS_CHARGING ? "CHR" :
- (status == CS_DISCHARGING ? "BAT" : "FULL")),
- (((float)remaining / (float)full_design) * 100));
- }
- return part;
-}
-
-/*
- * Return the IP address for the given interface or "no IP" if the
- * interface is up and running but hasn't got an IP address yet
- *
- */
-static const char *get_ip_address(const char *interface) {
- static char part[512];
- struct ifreq ifr;
- struct sockaddr_in addr;
- socklen_t len = sizeof(struct sockaddr_in);
- memset(part, 0, sizeof(part));
-
- (void)strcpy(ifr.ifr_name, interface);
- ifr.ifr_addr.sa_family = AF_INET;
- if (ioctl(general_socket, SIOCGIFADDR, &ifr) < 0)
- return NULL;
-
- memcpy(&addr, &ifr.ifr_addr, len);
- (void)inet_ntop(AF_INET, &addr.sin_addr.s_addr, part, len);
- if (strlen(part) == 0)
- (void)snprintf(part, sizeof(part), "no IP");
-
- return part;
-}
-
-/*
- * Just parses /proc/net/wireless looking for lines beginning with
- * wlan_interface, extracting the quality of the link and adding the
- * current IP address of wlan_interface.
- *
- */
-static char *get_wireless_info() {
- char buf[1024];
- static char part[512];
- char *interfaces;
- int fd;
- memset(buf, 0, sizeof(buf));
- memset(part, 0, sizeof(part));
-
- if ((fd = open("/proc/net/wireless", O_RDONLY)) == -1)
- die("Could not open /proc/net/wireless\n");
- (void)read(fd, buf, sizeof(buf));
- (void)close(fd);
-
- interfaces = skip_character(buf, '\n', 1) + 1;
- while ((interfaces = skip_character(interfaces, '\n', 1)+1) < buf+strlen(buf)) {
- while (isspace((int)*interfaces))
- interfaces++;
- if (!BEGINS_WITH(interfaces, wlan_interface))
- continue;
- int quality;
- if (sscanf(interfaces, "%*[^:]: 0000 %d", &quality) != 1)
- continue;
- if ((quality == UCHAR_MAX) || (quality == 0)) {
- if (use_colors)
- (void)snprintf(part, sizeof(part), "%sW: down", color("#FF0000"));
- else (void)snprintf(part, sizeof(part), "W: down");
- } else (void)snprintf(part, sizeof(part), "%sW: (%03d%%) %s",
- color("#00FF00"), quality, get_ip_address(wlan_interface));
- return part;
- }
-
- return part;
-}
-
-/*
- * Combines ethernet IP addresses and speed (if requested) for displaying
- *
- */
-static char *get_eth_info() {
- static char part[512];
- const char *ip_address = get_ip_address(eth_interface);
- int ethspeed = 0;
-
- if (get_ethspeed) {
-#ifdef LINUX
- /* This code path requires root privileges */
- struct ifreq ifr;
- struct ethtool_cmd ecmd;
-
- ecmd.cmd = ETHTOOL_GSET;
- (void)memset(&ifr, 0, sizeof(ifr));
- ifr.ifr_data = (caddr_t)&ecmd;
- (void)strcpy(ifr.ifr_name, eth_interface);
- if (ioctl(general_socket, SIOCETHTOOL, &ifr) == 0)
- ethspeed = (ecmd.speed == USHRT_MAX ? 0 : ecmd.speed);
- else get_ethspeed = false;
-#endif
- }
-
- if (ip_address == NULL)
- (void)snprintf(part, sizeof(part), "E: down");
- else {
- if (get_ethspeed)
- (void)snprintf(part, sizeof(part), "E: %s (%d Mbit/s)", ip_address, ethspeed);
- else (void)snprintf(part, sizeof(part), "E: %s", ip_address);
- }
-
- return part;
-}