+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Nov 2 13:15:42 2007 -0700
+
+ fix wording in README
+
+ Changed the wording to properly describe the shadowing
+ of the environment from ROM to RAM
+
+ Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Wed Oct 31 02:18:15 2007 +0900
+
+ blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 25 16:08:14 2007 +0300
+
+ Trimmed some variables in ne2000.c
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
+
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+ The scan code of the key 'z' is 0x1d, which should be handled.
+
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:30:04 2007 +0800
+
+ Fix USB support issue for MPC8641HPCN board.
+
+ The configuration file has already enabled USB, but it
+ missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+ on MPC8641HPCN can not work because of the wrong USB
+ register endian.
+
+ And add the USB command to U-Boot commands list.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Oct 24 18:16:01 2007 +0200
+
+ Use config_cmd_default.h instead of config_cmd_all.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
+
+ TQM5200: Call usb_cpu_init() during board init
+
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 16:25:50 2007 +0200
+
+ Fix typo in nfs.c
+
+ An obvious typo. Originally fixed in linkstation u-boot port.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 14:35:05 2007 +0200
+
+ Fix a typo in cpu/mpc824x/interrupts.c
+
+ Since December 2003 the timer_interrupt_cpu() function in
+ cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+ parameter. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:13:51 2007 +0200
+
+ add ft_cpu_setup(..) on mpc8260
+
+ Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+ based on code from mpc5xxx
+
+ Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:18:42 2007 +0200
+
+ changes for IDS8247 board support
+
+ To get the IDS8247 board working following are done:
+ - FCC2 is deactivated
+ - FCC1 is activated
+ - I2C is activated
+ - CFI driver is activated
+ - Adapted for use with LIBFDT
+
+ Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 24 15:48:37 2007 +0200
+
+ ATSTK1002: Remove default ethernet addresses
+
+ Wolfgang is right: It's not a good idea to set up default initial
+ ethernet addresses for a board, even though they belong to the local
+ range.
+
+ This will change the failure mode from "IT manager screams at you for
+ using duplicate ethernet addresses" to a nice error message explaining
+ that the ethernet address hasn't been set properly.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
+
+ DHCP Client Fix
+
+ This is a multi-part message in MIME format.
+
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
+
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
+
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:16:22 2007 -0500
+
+ ColdFire 54455: Fix correct boot location for atmel and intel
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:14:00 2007 -0500
+
+ ColdFire: Fix build error when CONFIG_WATCHDOG is defined
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c67e12e705b204cfe914e3e3e693d69a445dcabf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:12:36 2007 -0500
+
+ ColdFire 5329: Assign correct SDRAM size and fix cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:10:23 2007 -0500
+
+ ColdFire 5253: Assign correct SDRAM size
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2acefa72ee0026f862ab65597ca687428f63a973
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:09:17 2007 -0500
+
+ ColdFire 5282: Fix external flash boot and return dramsize
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 25 17:20:01 2007 +0200
+
+ TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:42:25 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit be4a87f11e297a5cededbf7dd71c0248f3874acd
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:41:27 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b31f64343ead9482cd439b1adbe4c34026a641b1
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:45:53 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:40:06 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Oct 21 09:14:28 2007 +0200
+
+ Mips: Fix string functions differ prototype declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Oct 19 17:51:40 2007 -0500
+
+ fsl_pci_init enable COMMAND_MEMORY if inbound window
+
+ Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
+ to pciauto_setup_device has the side effect of not getting
+ COMMAND_MEMORY set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e9d0d527992566ebef9826962ff1745b2f082b92
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 10:55:24 2007 +0200
+
+ delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 08:10:15 2007 +0200
+
+ fix warning: no return statement in function returning non-void
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e78220f6e514206757acfe247297fc9a328a881f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 06:33:45 2007 +0200
+
+ xsengine: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:24:59 2007 +0200
+
+ lubbock: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 23 16:50:03 2007 +0200
+
+ Coding style: keep lists sorted; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 58b74b05c621e2835ecf4e2d3243042cf4186777
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:09:05 2007 +0200
+
+ Fix missing drivers makefile entries ds1722.c mw_eeprom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96455bfebc9887837095c9051d216f53c61b5f10
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:07:39 2007 +0200
+
+ Fix warning differ in signedness in board/innokom/innokom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Oct 19 00:25:33 2007 +0200
+
+ fix pxa255_idp board
+
+ The pxa255_idp being an old unmaintained board showed several issues:
+ 1. CONFIG_INIT_CRITICAL was still defined.
+ 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
+ 3. Symbol flash_addr was undeclared.
+ 4. The boards lowlevel_init function was still called memsetup.
+ 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
+ 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
+ 'target CPU does not support interworking' warnings on recent compilers.
+ 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
+ indexes rather than the register definitions from the pxa-regs header
+ file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
+ avoid any ambiguities.
+ 8. There were several redefinition warnings concerning ICMR, OSMR3,
+ OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
+ 9. The board configuration file was rather outdated.
+ 10. The part header file defined the vendor, product and revision arrays
+ as unsigned chars instead of just chars in the block_dev_desc_t
+ structure.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
+Author: Rune Torgersen <runet@innovsys.com>
+Date: Wed Oct 17 11:56:31 2007 -0500
+
+ Make MPC8266ADS command selection more robust
+
+ Fix MPC8266 command line definition so it won't break when new commands
+ are added to u-boot.
+ Signed-off-by Rune Torgersen <runet@innovsys.com>
+
+commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 13:14:10 2007 +0200
+
+ Motion-PRO: Update configuration to accomodate next generation board.
+
+ New board has faster oscillator and a different Flash chip. This affects:
+ - CFG_MPC5XXX_CLKIN
+ - SDRAM timings
+ - Flash CS configuration (timings)
+ - Flash sector size, and thus MTD partition layout
+ - malloc() arena size (due to bigger Flash sectors)
+ - smaller memory test range (due to bigger malloc() arena)
+
+ This patch also enables more extensive memory testing via "mtest".
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eff501904df2bf1724a750062628ba2c51dbb1f8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 11:36:07 2007 +0200
+
+ Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
+
+ Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
+ register must be written a value of 0x00000004 as the first step of the
+ SDRAM contorller configuration.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Oct 23 10:22:16 2007 +0100
+
+ Move PL01* serial drivers to drivers/serial and adjust Makefiles.
+
+commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Sun Oct 21 22:10:10 2007 +0900
+
+ [MIPS] Fix UNCACHED_SDRAM
+
+ PHYSADDR is for physical address, KSEG1ADDR is for uncached.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 00101dd7a32d12f698150123e47e4b3420279f86
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 21:30:42 2007 +0900
+
+ [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit eb700636db017d310edaeb559b13d82588560674
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:37 2007 +0900
+
+ [MIPS] u-boot.lds: Define _gp in a standard manner
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] Fix $gp usage
+
+ Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
+ As a general principle, we should use _gp for $gp.
+
+ Thanks to linker script's help we fortunately have _gp which equals to
+ _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
+ be able to access to GOT entires, global variables and procedure entry
+ points. The right thing to do is to use _gp.
+
+ This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
+ which holds the offset from _gp. When updating GOT entries, we use this
+ offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
+
+ This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
+ I made some change to leave over num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Vlad Lungu <vlad@comsys.ro>
+
+commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Fix __got_start and __got_end
+
+ Ensure that __got_start points to top of the `.got', and __got_end points
+ to bottom as well, so that we never fail to count num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Remove duplicated .sdata section
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 21 01:01:17 2007 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 4 20:47:10 2007 +0300
+
+ Fix NE2000 driver:
+
+ Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
+ to do anything in eth_stop() if eth_init() was not called.
+ Simplified RX path in order to avoid timeouts on really really
+ fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
+ clever enough to cope with 1 packet per eth_rx().
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit df90968b48fb34fa9072fab150db2ac89678f537
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:32:13 2007 -0400
+
+ Setting MSR[DE] in do_reset
+
+ Hello,
+ This patch ensures the soft reset of the board for the 85xx boards
+ by setting the MSR[DE] in the do_reset function.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:36:01 2007 -0400
+
+ MSR overwrite fix
+
+ Hello,
+ This patch fixes the MSR overwrite in the start.S when moving out of
+ the last 4K page.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
+Author: Dan Wilson <dwilson@fulcrummicro.com>
+Date: Fri Oct 19 11:33:48 2007 -0500
+
+ tsec driver should clear RHALT on startup
+
+ This was causing problems for some people.
+
+ Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
+ Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:29:18 2007 -0500
+
+ Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
+
+ On the MPC85xx CDS we have two issues:
+
+ 1. The device tree fixup code did not check to see if the property we are
+ trying to update is actually found. Its possible that it would update
+ random memory starting at 0.
+
+ 2. Newer Linux kernel's have moved the location of the PCI nodes to be
+ sibilings of the soc node and not children. The explicit PATH to the PCI
+ node would not be found for these device trees. Add the ability to handle
+ both paths. In the future we shouldn't handle such fixups by explicit path.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3063eec775719b7e91023bbec3f64b3118791df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:18:48 2007 -0500
+
+ Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
+
+ On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
+ console. Make it so we match that config what we tell Linux as the early
+ STDOUT console.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e1ce3cb617bb06f91f82f98915391175addf3e82
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 2 11:12:27 2007 -0500
+
+ Remove magic numbers from cache related operations for mpc85xx
+
+ The mpc85xx start code uses some magic numbers that we actually
+ have #defines for in <config.h> so use those instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Oct 19 16:47:26 2007 +0200
+
+ Fix two typos.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 281df457c1aa50d2752165d0c5c3282d4027b974
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:47:19 2007 +0800
+
+ mpc83xx: Add configure entry for MPC83xx ATM support
+
+ Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
+ Makfile and MAKEALL
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d2646554f529a9577515eceb0ec5eceee18244ba
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:44:38 2007 +0800
+
+ mpc83xx: pq-mds-pib.c typo error
+
+ Correct to val8 from val.
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3e11ae80fec1ee12194940955431186abf6009c2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 17 15:40:19 2007 +0200
+
+ ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
+Author: runet@innovsys.com <runet@innovsys.com>
+Date: Tue Oct 16 14:50:40 2007 -0500
+
+ Make MPC8266ADS board compile again.
+
+ Signed-off-by: Runet Torgersen <runet@innovsys.com>
+
+commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 27 12:41:03 2007 -0500
+
+ 86xx: Allow for fewer DDR slots per memory controller.
+
+ As a direct correlation exists between DDR DIMM slots
+ and SPD EEPROM addresses used to configure them, use
+ the individually defined SPD_EEPROM_ADDRESS* values to
+ determine if a DDR DIMM slot should have its SPD
+ configuration read or not.
+
+ Effectively, this now allows for 1 or 2 DIMM slots
+ per memory controller.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d4a945e189a2f384c66432316da2788a0ac1607
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Oct 15 11:59:17 2007 +0200
+
+ PXA USB OHCI: "usb stop" implementation.
+
+ Some USB keys need to be switched off before loading the kernel
+ otherwise they can remain in an undefined status which prevents them
+ to be correctly recognized by the kernel.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit e2e93442e558cf1500e92861f99713b2f045ea22
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:39:00 2007 +0200
+
+ ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
+
+ The I2C bootstrap values that can be setup via the "bootstrap" command,
+ were setup incorrect regarding the generation of the internal sync PCI
+ clock. The values for PLB clock == 133MHz were slighly incorrect and the
+ values for PLB clock == 166MHz were totally incorrect. This could
+ lead to a hangup upon booting while PCI configuration scan.
+
+ This patch fixes this issue and configures valid PCI divisor values
+ for the sync PCI clock, with respect to the provided external async
+ PCI frequency.
+
+ Here the values of the formula in the chapter 14.2 "PCI clocking"
+ from the 440EPx users manual:
+
+ AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
+
+ 33MHz async PCI frequency:
+ PLB = 133:
+ => 32 <= 44.3 <= 65 (div = 3)
+
+ PLB = 166:
+ => 32 <= 55.3 <= 65 (div = 3)
+
+ 66MHz async PCI frequency:
+ PLB = 133:
+ => 65 <= 66.5 <= 132 (div = 2)
+
+ PLB = 166:
+ => 65 <= 83 <= 132 (div = 2)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:29:33 2007 +0200
+
+ ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
+
+ The BCSR status bit for the 66MHz PCI operation was correctly
+ addressed (MSB/LSB problem). Now the correct currently setup
+ PCI frequency is displayed upon bootup.
+
+ This patch also fixes this problem on Rainier & Yellowstone, since these
+ boards use the same souce code as Sequoia & Yosemite do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM860M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM8xx: Fix CAN timing.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit d43e489baf02afae49077791fb22332d240d8656
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 14:54:36 2007 +0200
+
+ TQM866M: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 97. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9ef57bbee1c67cc01da2026c242c4692db32be36
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:55 2007 +0200
+
+ TQM866M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Oct 14 16:12:29 2007 +0200
+
+ [FIX] XUPV2P change command handling
+ and remove code violation
+
+commit 636400198228d96983c06657b17f760f5989958e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 14 00:13:19 2007 +0200
+
+ Prepare for 1.3.0-rc3 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Sep 29 13:41:37 2007 +0200
+
+ Fix warning differ in signedness in cpu/pxa/mmc.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit fc19e36f741e8bc727c0a330170b3b5db90399ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 23:51:14 2007 +0200
+
+ Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 21:15:39 2007 +0200
+
+ Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e1893815b0999410d7a327589611c7b38e95299e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 12 15:49:39 2007 +0200
+
+ GP3 SSA: enable RTC
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8002012041f1ff9f997a5727abe5015f70cd2e46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Oct 9 13:58:24 2007 +0200
+
+ [ads5121] EEPROM support added.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:35 2007 +0200
+
+ AVR32: Initialize bi_flash* in board_init_r
+
+ The ATSTK1000-specific flash driver intializes bi_flashstart,
+ bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
+ driver, don't.
+
+ Initialize these in board_init_r instead so that things will still be
+ set up correctly when we switch to the CFI driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Oct 5 10:40:54 2007 +0200
+
+ tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 92869195ef8210758d2176230c0a36897afd50ed
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Oct 5 09:46:06 2007 +0200
+
+ CM5200: Fix missing null-termination in hostname manipulation code
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 2 19:09:01 2007 +0200
+
+ Fix memtest breakage
+
+ CFG_MEMTEST_START uses weird magic involving gd, which fails to
+ compile. Use hardcoded values instead (we actually know how much RAM
+ we have on board.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:46 2007 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:19 2007 +0200
+
+ ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Oct 1 09:51:50 2007 +0200
+
+ Program EPLD to force full duplex mode for PHY.
+
+ EPLD forces modes of PHY operation. By default full duplex is turned off.
+ This fix turns it on.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
+Author: Timo Ketola <timo.ketola@exertus.fi>
+Date: Mon Sep 24 14:50:32 2007 +0300
+
+ Bugfix: Use only one PTD for one endpoint
+
+ Original isp116x-hcd code prepared multiple PTDs for longer than 16
+ byte transfers for one endpoint. That is unnecessary because the
+ ISP116x is able to split long data from one PTD into multiple
+ transactions based on the buffer size of the endpoint. It also caused
+ serious problems if the endpoint NAKed some of the transactions. In
+ that case ISP116x wouldn't notice that the other PTDs were for the same
+ endpoint and would try the other PTDs possibly out of order. That would
+ break the whole transfer.
+
+ This patch makes isp116x_submit_job to use one PTD for one transfer.
+
+ Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 86ec86c04326c3913178a7679aa910de071da75d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Sep 27 23:27:47 2007 +0200
+
+ Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Sep 11 14:12:55 2007 +0200
+
+ ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Sep 26 16:35:54 2007 -0500
+
+ 85xx io out functions need sync after write.
+
+ This fixes the mc146818 rtc_read/write functions for 85xx.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 25 15:48:05 2007 -0600
+
+ Fpga: fix incorrect test of CFG_FPGA_XILINX macro
+
+ CFG_FPGA_XILINX is a bit value used to test against the value in
+ CONFIG_FPGA. Testing for a value will always return TRUE. I don't
+ think that is the intention in this code.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:41:30 2007 +0200
+
+ [FIX] change command handling and removing code violation
+
+commit f240356507038e5ce55e8a24cb2607e9eae6d10c
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:36:06 2007 +0200
+
+ [FIX] change sets of commands
+ because changing of command handling brings
+ compilation problems
+
+commit cb1bc63b75a232571eb69aa2c8aa919321655845
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:30:42 2007 +0200
+
+ [FIX] Email reparation & Copyright
+ Both codes are written by myself without any
+ support from CTU
+
+commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:25:11 2007 +0200
+
+ [PATCH] Change macro name for UartLite
+ because PowerPC 405 can use UartLite as console
+
+commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:21:19 2007 +0200
+
+ [PATCH] Add support for design without interrupt controller
+ Polling timer
+
+commit 0731933ec8ec45d02ba89b52df673d526873cdde
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:19:48 2007 +0200
+
+ [FIX] resolve problem with cpu without barrel shifter
+
+commit db14d77995ce515b728b178b63f82babe60e3d56
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:18:46 2007 +0200
+
+ [FIX] repair email address
+
+commit 481d4328618804add1f818a6c96296121cd0528e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:17:42 2007 +0200
+
+ [FIX] repair MFSL commands
+
+commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:08:37 2007 +0200
+
+ synchronizition with mainline
+
+commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 20 00:04:14 2007 +0200
+
+ v1.3.0-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 135e19bc2773ebca487e9a8371f67e1ba202313a
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Sep 18 21:36:35 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit bd86220f58b99d6896198c385fda132f0c980915
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 18 13:07:54 2007 +0100
+
+ Move coloured led API to status_led.h
+ Improve indentation in drivers/at45.c
+
+commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Tue Sep 18 08:47:20 2007 +0200
+
+ Update atstk1002 bootargs.
+
+ Updates to atstk1002 U-Boot header file:
+ - Changed bootargs:
+ * Set the bootargs for at1002 to point to the SD-card partition instead
+ * ... of the boot flash.
+ * Removing the rootfstype since that argument are not needed.
+
+ Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Wed Sep 12 13:32:37 2007 +0200
+
+ Add some comments to clocks in atstk1002.h
+
+ This patch applies some clarifying comments to how the different
+ clocks are setup according to atstk1002.h Some of the previous
+ comments where stating wrongful information.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 97213f32416ead885deafea86774e912ffd60ad0
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Sep 17 17:04:47 2007 +0200
+
+ Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+
+commit 30363e98fa470fbecea5e8bc0f1443352754f303
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 17 08:20:47 2007 +0200
+
+ Small whitespace cleanup of OneNAND patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:15:14 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 3/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 17aa2800457df0c06b41516f46f126712c196219
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:14:34 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 2/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:13:49 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 1/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Sep 16 20:51:57 2007 +0200
+
+ [FIX] remove files form repository
+
commit 67c31036acaaaa992fc346cc89db0909a7e733c4
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Sep 16 17:10:04 2007 +0200
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
+commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Sep 15 00:03:35 2007 +0200
+
+ Synchronize with U-BOOT mainline
+
+commit d7fee32b7e61fe11c64e371cde79faa4768e8350
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Thu Sep 13 18:21:48 2007 +0200
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 16:33:59 2007 +0200
+
+ tqm5200: Restore customary env. variable boot commands for powerpc kernels
+
+ - update default definitions of kernel_addr and fdt_addr env. variables
+ - make arch/powerpc booting the default scenario
+ - update MTD partition layout to match the above
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
commit f34024d4a328e6edd906456da98d2c537155c4f7
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Sep 12 00:48:57 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 11 15:35:01 2007 +0100
+
+ Final tidy
+
commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
Author: Grzegorz Bernacki <gjb@semihalf.com>
Date: Tue Sep 11 15:42:11 2007 +0200
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+commit d45963854eff39d575124d859419bb4953ce2c87
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Sep 11 00:37:04 2007 +0200
+
+ [FIX] Microblaze ML401 - repare FLASH handling
+
commit 38c1ef728d19950414a8ab1ccfc53767848fa346
Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
Date: Mon Sep 10 16:55:59 2007 +0100
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 80767a6cead9990d9e77e62be947843c2c72f469
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
commit 56a9270521baaa00e12639a978302a67f61ef060
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Thu Aug 30 16:18:18 2007 -0500
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 16:18:38 2007 +0100
+
+ Add coloured led interface for ARM boards.
+ Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
+
+commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:49:28 2007 +0100
+
+ Move include/led.h to board/at91rm9200dk
+
+commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:25:51 2007 +0100
+
+ Ran Lindent on drivers/at45.c
+
+commit 557ab89d294f08dd532f21d19861b40093200a33
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:23:50 2007 +0100
+
+ Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
+
commit 81b73dec16fd1227369a191e725e10044a9d56b8
Author: Gary Jennejohn <garyj@denx.de>
Date: Fri Aug 31 15:21:46 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:05 2007 +0200
+
+ Reduce BOOTDELAY variable to 1 second by default for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:04 2007 +0200
+
+ Remove double quotation marks around MAC address for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
commit ff13ac8c7bbebb238e339592de765c546dba1073
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Aug 30 14:42:15 2007 +0200
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 29 16:31:18 2007 +0200
+
+ ppc4xx: Change lwmon5 default environment to support Linux RTC
+
+ The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
+ to supply the RTC I2C address as bootline parameter. This patch
+ adds support for this rtc probing parameter to the bootargs:
+
+ "rtc-pcf8563.probe=0,0x51"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Aug 29 09:06:05 2007 -0500
Signed-off-by: Heiko Schocher <hs@denx.de>
+commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
+Author: Semih Hazar <semih.hazar@indefia.com>
+Date: Mon Aug 20 19:00:01 2007 +0300
+
+ AVR32: Change prototype of memset
+
+ Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
commit 9c02defc29b57945b600714cf61ddfd02b02fb14
Author: Yuri Tikhonov <yur@emcraft.com>
Date: Sat Aug 25 05:07:16 2007 +0200
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:46:28 2007 +0200
+
+ [FIX] Changes for bios_emulator code for others architecture
+
+commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:45:09 2007 +0200
+
+ [FIX] Remove unused include file
+
commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
Author: Stefan Roese <sr@denx.de>
Date: Thu Aug 16 10:18:33 2007 +0200
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+commit 5b4de9309d7a03aa1db2e5391ab696363391f460
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:15:05 2007 +0200
+
+ [FIX] Resolve problem with warnings
+ microblaze toolchain don't support PRAGMA PACK.
+
+commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:05:07 2007 +0200
+
+ [FIX] Correction command setting for Microblaze boards
+
+commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:03:41 2007 +0200
+
+ [FIX] Correction command definition
+
commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
Author: Jon Loeliger <jdl@freescale.com>
Date: Wed Aug 15 11:55:35 2007 -0500
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 706714d97a0d08d59eda4de2268c39f504688329
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:41:53 2007 +0200
+
+ [FIX] remove cute code
+
+commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:35:26 2007 +0200
+
+ [FIX] Fix romfs code
+
+commit ab4b956d3143f8f8174089053f5dfabbb04762b0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:31:49 2007 +0200
+
+ [FIX] Coding style cleanup - Wolfgang's suggestions
+
commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Aug 6 23:21:05 2007 +0200
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit a274ca4f6d68830e7c916f897561cff8c4101c38
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 22:33:05 2007 +0200
+
+ [FIX] Coding style cleanup
+
+commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 16:13:31 2007 +0200
+
+ [FIX] Xilinx Uartlite driver
+ Because PPC405 can use UARTLITE serial interface and
+ Microblaze can use Uart16550 serial interface not only Uartlite.
+
+commit 98889edd50aadf862071eb5664747ad0d568a20e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:54:53 2007 +0200
+
+ [FIX] Change configuration for XUPV2P Microblaze board
+
+commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:53:50 2007 +0200
+
+ [PATCH] Added support for Xilinx Emac community driver
+
commit 86b116b1b1e165ca4840daefed36d2e3b8460173
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Fri Aug 3 12:08:16 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 16 00:31:07 2007 +0200
+
+ [PATCH] Support for Xilinx EmacLite controller
+
commit 3a6cab844cf74f76639d795e0be8717e02c86af7
Author: Wolfgang Denk <wd@denx.de>
Date: Sat Jul 14 22:51:02 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 13:11:28 2007 +0200
+
+ [FIX] support for simply measuring time
+
+commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 12:41:23 2007 +0200
+
+ [FS] Added support for ROMFS
+
commit 011595307731a7a67a7445d107c279d031e8ab97
Author: Heiko Schocher <hs@pollux.denx.de>
Date: Sat Jul 14 01:06:58 2007 +0200
[PCS440EP] - fix compile error, if BUILD_DIR is used
+commit 5a2f1098d81ad58b309e5e558d0492643166a799
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 00:18:48 2007 +0200
+
+ [PATCH] Support time without timer
+
+commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:43:55 2007 +0200
+
+ [PATCH] Remove problem with disabled BARREL SHIFTER
+
+commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:41:44 2007 +0200
+
+ [FIX] correct help for rspr
+
commit fad63407154f46246ce80d53a9c669a44362ac67
Author: Heiko Schocher <hs@pollux.denx.de>
Date: Fri Jul 13 09:54:17 2007 +0200
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:04:11 2007 +0200
+
+ [fix] email reparation
+
+commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:03:21 2007 +0200
+
+ [FIX] fix microblaze file permitission
+
commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
Author: Stefan Roese <sr@denx.de>
Date: Fri Jun 15 11:33:41 2007 +0200