/*\r
- FreeRTOS.org V5.0.4 - Copyright (C) 2003-2008 Richard Barry.\r
+ FreeRTOS V6.0.0 - Copyright (C) 2009 Real Time Engineers Ltd.\r
\r
- This file is part of the FreeRTOS.org distribution.\r
+ This file is part of the FreeRTOS distribution.\r
\r
- FreeRTOS.org is free software; you can redistribute it and/or modify\r
- it under the terms of the GNU General Public License as published by\r
- the Free Software Foundation; either version 2 of the License, or\r
- (at your option) any later version.\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation and modified by the FreeRTOS exception.\r
+ **NOTE** The exception to the GPL is included to allow you to distribute a\r
+ combined work that includes FreeRTOS without being obliged to provide the\r
+ source code for proprietary components outside of the FreeRTOS kernel.\r
+ Alternative commercial license and support terms are also available upon\r
+ request. See the licensing section of http://www.FreeRTOS.org for full\r
+ license details.\r
\r
- FreeRTOS.org is distributed in the hope that it will be useful,\r
- but WITHOUT ANY WARRANTY; without even the implied warranty of\r
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
- GNU General Public License for more details.\r
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT\r
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or\r
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details.\r
\r
- You should have received a copy of the GNU General Public License\r
- along with FreeRTOS.org; if not, write to the Free Software\r
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\r
+ You should have received a copy of the GNU General Public License along\r
+ with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59\r
+ Temple Place, Suite 330, Boston, MA 02111-1307 USA.\r
\r
- A special exception to the GPL can be applied should you wish to distribute\r
- a combined work that includes FreeRTOS.org, without being obliged to provide\r
- the source code for any proprietary components. See the licensing section\r
- of http://www.FreeRTOS.org for full details of how and when the exception\r
- can be applied.\r
\r
- ***************************************************************************\r
***************************************************************************\r
* *\r
- * SAVE TIME AND MONEY! We can port FreeRTOS.org to your own hardware, *\r
- * and even write all or part of your application on your behalf. *\r
- * See http://www.OpenRTOS.com for details of the services we provide to *\r
- * expedite your project. *\r
+ * The FreeRTOS eBook and reference manual are available to purchase for a *\r
+ * small fee. Help yourself get started quickly while also helping the *\r
+ * FreeRTOS project! See http://www.FreeRTOS.org/Documentation for details *\r
* *\r
***************************************************************************\r
- ***************************************************************************\r
\r
- Please ensure to read the configuration and relevant port sections of the\r
- online documentation.\r
+ 1 tab == 4 spaces!\r
+\r
+ Please ensure to read the configuration and relevant port sections of the\r
+ online documentation.\r
\r
- http://www.FreeRTOS.org - Documentation, latest information, license and\r
- contact details.\r
+ http://www.FreeRTOS.org - Documentation, latest information, license and\r
+ contact details.\r
\r
- http://www.SafeRTOS.com - A version that is certified for use in safety\r
- critical systems.\r
+ http://www.SafeRTOS.com - A version that is certified for use in safety\r
+ critical systems.\r
\r
- http://www.OpenRTOS.com - Commercial support, development, porting,\r
- licensing and training services.\r
+ http://www.OpenRTOS.com - Commercial support, development, porting,\r
+ licensing and training services.\r
*/\r
\r
\r
\r
/* Demo app includes. */\r
#include "BlockQ.h"\r
-#include "death.h"\r
-#include "flash.h"\r
+#include "crflash.h"\r
#include "partest.h"\r
#include "semtest.h"\r
-#include "PollQ.h"\r
#include "GenQTest.h"\r
#include "QPeek.h"\r
-#include "recmutex.h"\r
+#include "comtest2.h"\r
\r
/*-----------------------------------------------------------*/\r
\r
\r
/* Task priorities. */\r
#define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
-#define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
#define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )\r
#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )\r
#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
-#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
-#define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
-#define mainWEB_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
+\r
+/* Co-routines are used to flash the LEDs. */\r
+#define mainNUM_FLASH_CO_ROUTINES ( 3 )\r
+\r
+/* The baud rate used by the comtest tasks. */\r
+#define mainBAUD_RATE ( 38400 )\r
+\r
+/* There is no spare LED for the comtest tasks, so this is set to an invalid\r
+number. */\r
+#define mainCOM_LED ( 4 )\r
\r
/*\r
* Configure the hardware for the demo.\r
prvSetupHardware();\r
\r
/* Start the standard demo tasks. */\r
- vStartLEDFlashTasks( tskIDLE_PRIORITY );\r
vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );\r
- vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );\r
vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );\r
vStartQueuePeekTasks();\r
- vStartRecursiveMutexTasks();\r
vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );\r
+ vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainBAUD_RATE, mainCOM_LED );\r
\r
- /* Start the reg test tasks - defined in this file. */\r
- xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );\r
- xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );\r
+ /* For demo purposes use some co-routines to flash the LEDs. */\r
+ vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );\r
\r
/* Create the check task. */\r
xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
\r
- /* The suicide tasks must be created last as they need to know how many\r
- tasks were running prior to their creation in order to ascertain whether\r
- or not the correct/expected number of tasks are running at any given time. */\r
- vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );\r
+\r
+ /* Start the reg test tasks - defined in this file. */\r
+ xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );\r
+ xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );\r
\r
/* Start the scheduler. */\r
vTaskStartScheduler();\r
\r
static void prvCheckTask( void *pvParameters )\r
{\r
-unsigned ulTicksToWait = mainNO_ERROR_PERIOD, ulError = 0, ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;\r
+unsigned portLONG ulTicksToWait = mainNO_ERROR_PERIOD, ulError = 0, ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;\r
portTickType xLastExecutionTime;\r
+volatile unsigned portBASE_TYPE uxUnusedStack;\r
\r
( void ) pvParameters;\r
\r
{\r
ulError |= 0x20UL;\r
}\r
-\r
- if( xArePollingQueuesStillRunning() != pdTRUE )\r
+ \r
+ if( xAreComTestTasksStillRunning() != pdTRUE )\r
{\r
ulError |= 0x40UL;\r
}\r
\r
- if( xIsCreateTaskStillRunning() != pdTRUE )\r
- {\r
- ulError |= 0x80UL;\r
- }\r
-\r
- if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )\r
- {\r
- ulError |= 0x200UL;\r
- }\r
-\r
if( ulLastRegTest1Count == ulRegTest1Counter )\r
{\r
ulError |= 0x1000UL;\r
ulLastRegTest2Count = ulRegTest2Counter;\r
\r
/* If an error has been found then increase our cycle rate, and in so\r
- going increase the rate at which the check task LED toggles. */\r
+ doing increase the rate at which the check task LED toggles. */\r
if( ulError != 0 )\r
{\r
ulTicksToWait = mainERROR_PERIOD;\r
\r
/* Toggle the LED each itteration. */\r
vParTestToggleLED( mainCHECK_LED );\r
+ \r
+ /* For demo only - how much unused stack does this task have? */\r
+ uxUnusedStack = uxTaskGetStackHighWaterMark( NULL );\r
}\r
}\r
/*-----------------------------------------------------------*/\r
}\r
/*-----------------------------------------------------------*/\r
\r
+void vApplicationIdleHook( void );\r
+void vApplicationIdleHook( void )\r
+{\r
+ /* The co-routines run in the idle task. */\r
+ vCoRoutineSchedule();\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void exit( int n )\r
+{\r
+ /* To keep the linker happy only as the libraries have been removed from\r
+ the build. */\r
+ ( void ) n;\r
+ for( ;; ) {}\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
static void vRegTest1Task( void *pvParameters )\r
{\r
/* Sanity check - did we receive the parameter expected? */\r
}\r
/*-----------------------------------------------------------*/\r
\r
-/* To keep the linker happy. */\r
-void exit( int n )\r
-{\r
- ( void ) n;\r
- for( ;; ) {}\r
-}\r
\r
\r
projects / freertos / blobdiff