]> git.sur5r.net Git - freertos/blobdiff - Demo/WizNET_DEMO_GCC_ARM7/main.c
Add STM32F0 demo.
[freertos] / Demo / WizNET_DEMO_GCC_ARM7 / main.c
index 52d83e59ccdb761f29ed7acd826bd04232490e26..812e8f95980dbdb0770ba4ac30079edae9689713 100644 (file)
@@ -1,48 +1,54 @@
 /*\r
-       FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.\r
-\r
-       This file is part of the FreeRTOS distribution.\r
-\r
-       FreeRTOS is free software; you can redistribute it and/or modify it     under \r
-       the terms of the GNU General Public License (version 2) as published by the \r
-       Free Software Foundation and modified by the FreeRTOS exception.\r
-       **NOTE** The exception to the GPL is included to allow you to distribute a\r
-       combined work that includes FreeRTOS without being obliged to provide the \r
-       source code for proprietary components outside of the FreeRTOS kernel.  \r
-       Alternative commercial license and support terms are also available upon \r
-       request.  See the licensing section of http://www.FreeRTOS.org for full \r
-       license details.\r
-\r
-       FreeRTOS is distributed in the hope that it will be useful,     but WITHOUT\r
-       ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or\r
-       FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for\r
-       more details.\r
-\r
-       You should have received a copy of the GNU General Public License along\r
-       with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59\r
-       Temple Place, Suite 330, Boston, MA  02111-1307  USA.\r
-\r
-\r
-       ***************************************************************************\r
-       *                                                                         *\r
-       * Looking for a quick start?  Then check out the FreeRTOS eBook!          *\r
-       * See http://www.FreeRTOS.org/Documentation for details                   *\r
-       *                                                                         *\r
-       ***************************************************************************\r
-\r
-       1 tab == 4 spaces!\r
-\r
-       Please ensure to read the configuration and relevant port sections of the\r
-       online documentation.\r
-\r
-       http://www.FreeRTOS.org - Documentation, latest information, license and\r
-       contact details.\r
-\r
-       http://www.SafeRTOS.com - A version that is certified for use in safety\r
-       critical systems.\r
+    FreeRTOS V7.1.0 - Copyright (C) 2011 Real Time Engineers Ltd.\r
+       \r
 \r
-       http://www.OpenRTOS.com - Commercial support, development, porting,\r
-       licensing and training services.\r
+    ***************************************************************************\r
+     *                                                                       *\r
+     *    FreeRTOS tutorial books are available in pdf and paperback.        *\r
+     *    Complete, revised, and edited pdf reference manuals are also       *\r
+     *    available.                                                         *\r
+     *                                                                       *\r
+     *    Purchasing FreeRTOS documentation will not only help you, by       *\r
+     *    ensuring you get running as quickly as possible and with an        *\r
+     *    in-depth knowledge of how to use FreeRTOS, it will also help       *\r
+     *    the FreeRTOS project to continue with its mission of providing     *\r
+     *    professional grade, cross platform, de facto standard solutions    *\r
+     *    for microcontrollers - completely free of charge!                  *\r
+     *                                                                       *\r
+     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *\r
+     *                                                                       *\r
+     *    Thank you for using FreeRTOS, and thank you for your support!      *\r
+     *                                                                       *\r
+    ***************************************************************************\r
+\r
+\r
+    This file is part of the FreeRTOS distribution.\r
+\r
+    FreeRTOS is free software; you can redistribute it and/or modify it under\r
+    the terms of the GNU General Public License (version 2) as published by the\r
+    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+    >>>NOTE<<< The modification to the GPL is included to allow you to\r
+    distribute a combined work that includes FreeRTOS without being obliged to\r
+    provide the source code for proprietary components outside of the FreeRTOS\r
+    kernel.  FreeRTOS is distributed in the hope that it will be useful, but\r
+    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\r
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for\r
+    more details. You should have received a copy of the GNU General Public\r
+    License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+    can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+    by writing to Richard Barry, contact details for whom are available on the\r
+    FreeRTOS WEB site.\r
+\r
+    1 tab == 4 spaces!\r
+\r
+    http://www.FreeRTOS.org - Documentation, latest information, license and\r
+    contact details.\r
+\r
+    http://www.SafeRTOS.com - A version that is certified for use in safety\r
+    critical systems.\r
+\r
+    http://www.OpenRTOS.com - Commercial support, development, porting,\r
+    licensing and training services.\r
 */\r
 \r
 /* \r
 /*-----------------------------------------------------------*/\r
 \r
 /* Constants to setup the PLL. */\r
-#define mainPLL_MUL_4          ( ( unsigned portCHAR ) 0x0003 )\r
-#define mainPLL_DIV_1          ( ( unsigned portCHAR ) 0x0000 )\r
-#define mainPLL_ENABLE         ( ( unsigned portCHAR ) 0x0001 )\r
-#define mainPLL_CONNECT                ( ( unsigned portCHAR ) 0x0003 )\r
-#define mainPLL_FEED_BYTE1     ( ( unsigned portCHAR ) 0xaa )\r
-#define mainPLL_FEED_BYTE2     ( ( unsigned portCHAR ) 0x55 )\r
-#define mainPLL_LOCK           ( ( unsigned portLONG ) 0x0400 )\r
+#define mainPLL_MUL_4          ( ( unsigned char ) 0x0003 )\r
+#define mainPLL_DIV_1          ( ( unsigned char ) 0x0000 )\r
+#define mainPLL_ENABLE         ( ( unsigned char ) 0x0001 )\r
+#define mainPLL_CONNECT                ( ( unsigned char ) 0x0003 )\r
+#define mainPLL_FEED_BYTE1     ( ( unsigned char ) 0xaa )\r
+#define mainPLL_FEED_BYTE2     ( ( unsigned char ) 0x55 )\r
+#define mainPLL_LOCK           ( ( unsigned long ) 0x0400 )\r
 \r
 /* Constants to setup the MAM. */\r
-#define mainMAM_TIM_3          ( ( unsigned portCHAR ) 0x03 )\r
-#define mainMAM_MODE_FULL      ( ( unsigned portCHAR ) 0x02 )\r
+#define mainMAM_TIM_3          ( ( unsigned char ) 0x03 )\r
+#define mainMAM_MODE_FULL      ( ( unsigned char ) 0x02 )\r
 \r
 /* Constants to setup the peripheral bus. */\r
-#define mainBUS_CLK_FULL       ( ( unsigned portCHAR ) 0x01 )\r
+#define mainBUS_CLK_FULL       ( ( unsigned char ) 0x01 )\r
 \r
 /* Constants to setup I/O and processor. */\r
-#define mainBUS_CLK_FULL       ( ( unsigned portCHAR ) 0x01 )\r
-#define mainLED_TO_OUTPUT      ( ( unsigned portLONG ) 0xff0000 )\r
-#define mainJTAG_PORT          ( ( unsigned portLONG ) 0x3E0000UL )\r
+#define mainBUS_CLK_FULL       ( ( unsigned char ) 0x01 )\r
+#define mainLED_TO_OUTPUT      ( ( unsigned long ) 0xff0000 )\r
+#define mainJTAG_PORT          ( ( unsigned long ) 0x3E0000UL )\r
 \r
 /* Priorities for the demo application tasks. */\r
 #define mainLED_TASK_PRIORITY          ( tskIDLE_PRIORITY + 1 )\r
 /* Flash rates of the on board LED to indicate the health of the system. */\r
 #define mainNO_ERROR_DELAY                     ( 3000 )\r
 #define mainERROR_DELAY                                ( 500 )\r
-#define mainON_BOARD_LED_BIT           ( ( unsigned portLONG ) 0x80 )\r
+#define mainON_BOARD_LED_BIT           ( ( unsigned long ) 0x80 )\r
 \r
 /*-----------------------------------------------------------*/\r
 \r
@@ -148,7 +154,7 @@ static void prvMainCheckOtherTasksAreStillRunning( void );
 /*-----------------------------------------------------------*/\r
 \r
 /* Flag set by prvMainCheckOtherTasksAreStillExecuting(). */\r
-portLONG lErrorInTask = pdFALSE;\r
+long lErrorInTask = pdFALSE;\r
 \r
 /*\r
  * Application entry point:\r
@@ -169,8 +175,8 @@ int main( void )
        vStartIntegerMathTasks( tskIDLE_PRIORITY );\r
 \r
        /* Start the WEB server task and the error check task. */\r
-       xTaskCreate( vHTTPServerTask, ( signed portCHAR * ) "HTTP", configMINIMAL_STACK_SIZE, NULL, mainHTTP_TASK_PRIORITY, NULL );\r
-       xTaskCreate( prvErrorChecks, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainERROR_CHECK_PRIORITY, NULL );\r
+       xTaskCreate( vHTTPServerTask, ( signed char * ) "HTTP", configMINIMAL_STACK_SIZE, NULL, mainHTTP_TASK_PRIORITY, NULL );\r
+       xTaskCreate( prvErrorChecks, ( signed char * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainERROR_CHECK_PRIORITY, NULL );\r
        \r
        /* Now all the tasks have been started - start the scheduler.\r
 \r
@@ -269,7 +275,7 @@ static void prvMainCheckOtherTasksAreStillRunning( void )
 \r
 void prvToggleOnBoardLED( void )\r
 {\r
-unsigned portLONG ulState;\r
+unsigned long ulState;\r
 \r
        ulState = GPIO0_IOPIN;\r
        if( ulState & mainON_BOARD_LED_BIT )\r