/*\r
- FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd. \r
+ FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd.\r
All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
vParTestInitialise();\r
\r
/* Create the queue used to communicate with the LCD print task. */\r
- xLCDQueue = xQueueCreate( mainLCD_QUEUE_LENGTH, sizeof( LCDMessage ) ); \r
- \r
+ xLCDQueue = xQueueCreate( mainLCD_QUEUE_LENGTH, sizeof( LCDMessage ) );\r
+\r
/* Create the standard demo application tasks. See the WEB documentation\r
for more information on these tasks. */\r
vCreateBlockTimeTasks();\r
vStartDynamicPriorityTasks();\r
vStartLEDFlashTasks( mainLED_TASK_PRIORITY );\r
vStartIntegerMathTasks( tskIDLE_PRIORITY );\r
- \r
+\r
/* Create the tasks defined within this file. */\r
- xTaskCreate( vPrintTask, ( signed char * ) "LCD", configMINIMAL_STACK_SIZE, NULL, mainLCD_TASK_PRIORITY, NULL );\r
- xTaskCreate( vCheckTask, ( signed char * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
- \r
+ xTaskCreate( vPrintTask, "LCD", configMINIMAL_STACK_SIZE, NULL, mainLCD_TASK_PRIORITY, NULL );\r
+ xTaskCreate( vCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
+\r
vTaskStartScheduler();\r
- \r
+\r
/* Execution will only reach here if there was insufficient heap to\r
start the scheduler. */\r
return 0;\r
\r
static void vCheckTask( void *pvParameters )\r
{\r
-static unsigned long ulErrorDetected = pdFALSE; \r
+static unsigned long ulErrorDetected = pdFALSE;\r
portTickType xLastExecutionTime;\r
unsigned char *ucErrorMessage = ( unsigned char * )" FAIL";\r
unsigned char *ucSuccessMessage = ( unsigned char * )" PASS";\r
vTaskDelayUntil( &xLastExecutionTime, mainCHECK_TASK_CYCLE_TIME );\r
\r
/* Has an error been found in any of the standard demo tasks? */\r
- \r
+\r
if( xAreIntegerMathsTaskStillRunning() != pdTRUE )\r
{\r
ulErrorDetected = pdTRUE;\r
{\r
ulErrorDetected = pdTRUE;\r
}\r
- \r
+\r
if( xAreComTestTasksStillRunning() != pdTRUE )\r
{\r
ulErrorDetected = pdTRUE;\r
- } \r
- \r
+ }\r
+\r
if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )\r
{\r
ulErrorDetected = pdTRUE;\r
- } \r
- \r
+ }\r
+\r
/* Calculate the LCD line on which we would like the message to\r
be displayed. The column variable is used for convenience as\r
it is incremented each cycle anyway. */\r
/* The message displayed depends on whether an error was found or\r
not. Any discovered error is latched. Here the column variable\r
is used as an index into the text string as a simple way of moving\r
- the text from column to column. */ \r
+ the text from column to column. */\r
if( ulErrorDetected == pdFALSE )\r
{\r
xMessage.pucString = ucSuccessMessage + uxColumn;\r
}\r
else\r
{\r
- xMessage.pucString = ucErrorMessage + uxColumn; \r
- } \r
+ xMessage.pucString = ucErrorMessage + uxColumn;\r
+ }\r
\r
/* Send the message to the print task for display. */\r
xQueueSend( xLCDQueue, ( void * ) &xMessage, mainNO_DELAY );\r
- \r
+\r
/* Make sure the message is printed in a different column the next\r
time around. */\r
uxColumn--;\r
{\r
/* Wait until a message arrives. */\r
while( xQueueReceive( xLCDQueue, ( void * ) &xMessage, portMAX_DELAY ) != pdPASS );\r
- \r
+\r
/* The message contains the text to display, and the line on which the\r
text should be displayed. */\r
LCD_Clear();\r
\r
static void prvSetupHardware(void)\r
{\r
-ErrorStatus OSC4MStartUpStatus01; \r
+ErrorStatus OSC4MStartUpStatus01;\r
\r
/* ST provided routine. */\r
\r
/* MRCC system reset */\r
MRCC_DeInit();\r
- \r
+\r
/* Wait for OSC4M start-up */\r
OSC4MStartUpStatus01 = MRCC_WaitForOSC4MStartUp();\r
- \r
+\r
if(OSC4MStartUpStatus01 == SUCCESS)\r
{\r
/* Set HCLK to 60MHz */\r
MRCC_HCLKConfig(MRCC_CKSYS_Div1);\r
- \r
+\r
/* Set CKTIM to 60MHz */\r
MRCC_CKTIMConfig(MRCC_HCLK_Div1);\r
- \r
+\r
/* Set PCLK to 30MHz */\r
MRCC_PCLKConfig(MRCC_CKTIM_Div2);\r
- \r
+\r
/* Enable Flash Burst mode */\r
CFG_FLASHBurstConfig(CFG_FLASHBurst_Enable);\r
- \r
+\r
/* Set CK_SYS to 60 MHz */\r
MRCC_CKSYSConfig(MRCC_CKSYS_OSC4MPLL, MRCC_PLL_Mul_15);\r
}\r
- \r
+\r
/* GPIO pins optimized for 3V3 operation */\r
MRCC_IOVoltageRangeConfig(MRCC_IOVoltageRange_3V3);\r
- \r
+\r
/* GPIO clock source enable */\r
MRCC_PeripheralClockConfig(MRCC_Peripheral_GPIO, ENABLE);\r
- \r
+\r
/* EXTIT clock source enable */\r
MRCC_PeripheralClockConfig(MRCC_Peripheral_EXTIT, ENABLE);\r
/* TB clock source enable */\r
MRCC_PeripheralClockConfig(MRCC_Peripheral_TB, ENABLE);\r
- \r
+\r
/* Initialize the demonstration menu */\r
LCD_Init();\r
- \r
+\r
LCD_DisplayString(Line1, ( unsigned char * ) "www.FreeRTOS.org", BlackText);\r
LCD_DisplayString(Line2, ( unsigned char * ) " STR750 Demo ", BlackText);\r
- \r
+\r
EIC_IRQCmd(ENABLE);\r
}\r
/*-----------------------------------------------------------*/\r