+++ /dev/null
-/*
- * Copyright (c) 2007-2008, Advanced Micro Devices, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Advanced Micro Devices, Inc. nor the names
- * of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Some portions copyright (c) 2010-2013 Xilinx, Inc. All rights reserved.
- *
- * Xilinx, Inc.
- * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
- * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
- * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR
- * STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION
- * IS FREE FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE
- * FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
- * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
- * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO
- * ANY WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE
- * FROM CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-
-#include "netif/xemacpsif.h"
-#include "lwipopts.h"
-#include "xparameters_ps.h"
-#include "xparameters.h"
-
-/*** IMPORTANT: Define PEEP in xemacpsif.h and sys_arch_raw.c
- *** to run it on a PEEP board
- ***/
-
-/* Advertisement control register. */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-
-#define ADVERTISE_100_AND_10 (ADVERTISE_10FULL | ADVERTISE_100FULL | \
- ADVERTISE_10HALF | ADVERTISE_100HALF)
-#define ADVERTISE_100 (ADVERTISE_100FULL | ADVERTISE_100HALF)
-#define ADVERTISE_10 (ADVERTISE_10FULL | ADVERTISE_10HALF)
-
-#define ADVERTISE_1000 0x0300
-
-
-#define IEEE_CONTROL_REG_OFFSET 0
-#define IEEE_STATUS_REG_OFFSET 1
-#define IEEE_AUTONEGO_ADVERTISE_REG 4
-#define IEEE_PARTNER_ABILITIES_1_REG_OFFSET 5
-#define IEEE_1000_ADVERTISE_REG_OFFSET 9
-#define IEEE_PARTNER_ABILITIES_3_REG_OFFSET 10
-#define IEEE_COPPER_SPECIFIC_CONTROL_REG 16
-#define IEEE_SPECIFIC_STATUS_REG 17
-#define IEEE_COPPER_SPECIFIC_STATUS_REG_2 19
-#define IEEE_CONTROL_REG_MAC 21
-#define IEEE_PAGE_ADDRESS_REGISTER 22
-
-
-#define IEEE_CTRL_1GBPS_LINKSPEED_MASK 0x2040
-#define IEEE_CTRL_LINKSPEED_MASK 0x0040
-#define IEEE_CTRL_LINKSPEED_1000M 0x0040
-#define IEEE_CTRL_LINKSPEED_100M 0x2000
-#define IEEE_CTRL_LINKSPEED_10M 0x0000
-#define IEEE_CTRL_RESET_MASK 0x8000
-#define IEEE_CTRL_AUTONEGOTIATE_ENABLE 0x1000
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
-#define IEEE_CTRL_RESET 0x9140
-#define IEEE_CTRL_ISOLATE_DISABLE 0xFBFF
-#endif
-#define IEEE_STAT_AUTONEGOTIATE_CAPABLE 0x0008
-#define IEEE_STAT_AUTONEGOTIATE_COMPLETE 0x0020
-#define IEEE_STAT_AUTONEGOTIATE_RESTART 0x0200
-#define IEEE_STAT_1GBPS_EXTENSIONS 0x0100
-#define IEEE_AN1_ABILITY_MASK 0x1FE0
-#define IEEE_AN3_ABILITY_MASK_1GBPS 0x0C00
-#define IEEE_AN1_ABILITY_MASK_100MBPS 0x0380
-#define IEEE_AN1_ABILITY_MASK_10MBPS 0x0060
-#define IEEE_RGMII_TXRX_CLOCK_DELAYED_MASK 0x0030
-
-#define IEEE_ASYMMETRIC_PAUSE_MASK 0x0800
-#define IEEE_PAUSE_MASK 0x0400
-#define IEEE_AUTONEG_ERROR_MASK 0x8000
-
-#define PHY_DETECT_REG 1
-#define PHY_DETECT_MASK 0x1808
-
-#define XEMACPS_GMII2RGMII_SPEED1000_FD 0x140
-#define XEMACPS_GMII2RGMII_SPEED100_FD 0x2100
-#define XEMACPS_GMII2RGMII_SPEED10_FD 0x100
-#define XEMACPS_GMII2RGMII_REG_NUM 0x10
-
-/* Frequency setting */
-#define SLCR_LOCK_ADDR (XPS_SYS_CTRL_BASEADDR + 0x4)
-#define SLCR_UNLOCK_ADDR (XPS_SYS_CTRL_BASEADDR + 0x8)
-#define SLCR_GEM0_CLK_CTRL_ADDR (XPS_SYS_CTRL_BASEADDR + 0x140)
-#define SLCR_GEM1_CLK_CTRL_ADDR (XPS_SYS_CTRL_BASEADDR + 0x144)
-#ifdef PEEP
-#define SLCR_GEM_10M_CLK_CTRL_VALUE 0x00103031
-#define SLCR_GEM_100M_CLK_CTRL_VALUE 0x00103001
-#define SLCR_GEM_1G_CLK_CTRL_VALUE 0x00103011
-#endif
-#define SLCR_LOCK_KEY_VALUE 0x767B
-#define SLCR_UNLOCK_KEY_VALUE 0xDF0D
-#define SLCR_ADDR_GEM_RST_CTRL (XPS_SYS_CTRL_BASEADDR + 0x214)
-#define EMACPS_SLCR_DIV_MASK 0xFC0FC0FF
-
-#define EMAC0_BASE_ADDRESS 0xE000B000
-#define EMAC1_BASE_ADDRESS 0xE000C000
-
-static int detect_phy(XEmacPs *xemacpsp)
-{
- u16 phy_reg;
- u32 phy_addr;
-
- for (phy_addr = 31; phy_addr > 0; phy_addr--) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, PHY_DETECT_REG,
- &phy_reg);
-
- if ((phy_reg != 0xFFFF) &&
- ((phy_reg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
- /* Found a valid PHY address */
- LWIP_DEBUGF(NETIF_DEBUG, ("XEmacPs detect_phy: PHY detected at address %d.\r\n",
- phy_addr));
- LWIP_DEBUGF(NETIF_DEBUG, ("XEmacPs detect_phy: PHY detected.\r\n"));
- return phy_addr;
- }
- }
-
- LWIP_DEBUGF(NETIF_DEBUG, ("XEmacPs detect_phy: No PHY detected. Assuming a PHY at address 0\r\n"));
-
- /* default to zero */
- return 0;
-}
-
-#ifdef PEEP
-unsigned get_IEEE_phy_speed(XEmacPs *xemacpsp)
-{
-
- u16 control;
- u16 status;
- u16 partner_capabilities;
- u16 partner_capabilities_1000;
- u16 phylinkspeed;
- u32 phy_addr = detect_phy(xemacpsp);
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_1000_ADVERTISE_REG_OFFSET,
- ADVERTISE_1000);
- /* Advertise PHY speed of 100 and 10 Mbps */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG,
- ADVERTISE_100_AND_10);
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET,
- &control);
- control |= (IEEE_CTRL_AUTONEGOTIATE_ENABLE |
- IEEE_STAT_AUTONEGOTIATE_RESTART);
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, control);
-
- /* Read PHY control and status registers is successful. */
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, &control);
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
-
- if ((control & IEEE_CTRL_AUTONEGOTIATE_ENABLE) && (status &
- IEEE_STAT_AUTONEGOTIATE_CAPABLE)) {
-
- while ( !(status & IEEE_STAT_AUTONEGOTIATE_COMPLETE) ) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_STATUS_REG_OFFSET,
- &status);
- }
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_PARTNER_ABILITIES_1_REG_OFFSET,
- &partner_capabilities);
-
- if (status & IEEE_STAT_1GBPS_EXTENSIONS) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_PARTNER_ABILITIES_3_REG_OFFSET,
- &partner_capabilities_1000);
- if (partner_capabilities_1000 & IEEE_AN3_ABILITY_MASK_1GBPS)
- return 1000;
- }
-
- if (partner_capabilities & IEEE_AN1_ABILITY_MASK_100MBPS)
- return 100;
- if (partner_capabilities & IEEE_AN1_ABILITY_MASK_10MBPS)
- return 10;
-
- xil_printf("%s: unknown PHY link speed, setting TEMAC speed to be 10 Mbps\r\n",
- __FUNCTION__);
- return 10;
-
- } else {
-
- /* Update TEMAC speed accordingly */
- if (status & IEEE_STAT_1GBPS_EXTENSIONS) {
- /* Get commanded link speed */
- phylinkspeed = control & IEEE_CTRL_1GBPS_LINKSPEED_MASK;
-
- switch (phylinkspeed) {
- case (IEEE_CTRL_LINKSPEED_1000M):
- return 1000;
- case (IEEE_CTRL_LINKSPEED_100M):
- return 100;
- case (IEEE_CTRL_LINKSPEED_10M):
- return 10;
- default:
- xil_printf("%s: unknown PHY link speed (%d), setting TEMAC speed to be 10 Mbps\r\n",
- __FUNCTION__, phylinkspeed);
- return 10;
- }
-
- } else {
-
- return (control & IEEE_CTRL_LINKSPEED_MASK) ? 100 : 10;
-
- }
- }
-}
-
-#else /* Zynq */
-unsigned get_IEEE_phy_speed(XEmacPs *xemacpsp)
-{
- u16 temp;
- u16 control;
- u16 status;
- u16 partner_capabilities;
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
- u32 phy_addr = XPAR_PCSPMA_SGMII_PHYADDR;
-#else
- u32 phy_addr = detect_phy(xemacpsp);
-#endif
- xil_printf("Start PHY autonegotiation \r\n");
-
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
-#else
- XEmacPs_PhyWrite(xemacpsp,phy_addr, IEEE_PAGE_ADDRESS_REGISTER, 2);
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_MAC, &control);
- control |= IEEE_RGMII_TXRX_CLOCK_DELAYED_MASK;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_MAC, control);
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_PAGE_ADDRESS_REGISTER, 0);
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG, &control);
- control |= IEEE_ASYMMETRIC_PAUSE_MASK;
- control |= IEEE_PAUSE_MASK;
- control |= ADVERTISE_100;
- control |= ADVERTISE_10;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG, control);
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_1000_ADVERTISE_REG_OFFSET,
- &control);
- control |= ADVERTISE_1000;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_1000_ADVERTISE_REG_OFFSET,
- control);
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_PAGE_ADDRESS_REGISTER, 0);
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_COPPER_SPECIFIC_CONTROL_REG,
- &control);
- control |= (7 << 12); /* max number of gigabit attempts */
- control |= (1 << 11); /* enable downshift */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_COPPER_SPECIFIC_CONTROL_REG,
- control);
-#endif
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, &control);
- control |= IEEE_CTRL_AUTONEGOTIATE_ENABLE;
- control |= IEEE_STAT_AUTONEGOTIATE_RESTART;
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
- control &= IEEE_CTRL_ISOLATE_DISABLE;
-#endif
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, control);
-
-
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
-#else
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, &control);
- control |= IEEE_CTRL_RESET_MASK;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, control);
-
- while (1) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, &control);
- if (control & IEEE_CTRL_RESET_MASK)
- continue;
- else
- break;
- }
-#endif
- xil_printf("Waiting for PHY to complete autonegotiation.\r\n");
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_STATUS_REG_OFFSET, &status);
- while ( !(status & IEEE_STAT_AUTONEGOTIATE_COMPLETE) ) {
- sleep(1);
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
-#else
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_COPPER_SPECIFIC_STATUS_REG_2,
- &temp);
- if (temp & IEEE_AUTONEG_ERROR_MASK) {
- xil_printf("Auto negotiation error \r\n");
- }
-#endif
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_STATUS_REG_OFFSET,
- &status);
- }
-
- xil_printf("autonegotiation complete \r\n");
-
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
-#else
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_SPECIFIC_STATUS_REG, &partner_capabilities);
-#endif
-
-#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
- xil_printf("Waiting for Link to be up; Polling for SGMII core Reg \r\n");
- XEmacPs_PhyRead(xemacpsp, phy_addr, 5, &temp);
- while(!(temp & 0x8000)) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, 5, &temp);
- }
- if((temp & 0x0C00) == 0x0800) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, 0, &temp);
- return 1000;
- }
- else if((temp & 0x0C00) == 0x0400) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, 0, &temp);
- return 100;
- }
- else if((temp & 0x0C00) == 0x0000) {
- XEmacPs_PhyRead(xemacpsp, phy_addr, 0, &temp);
- return 10;
- } else {
- xil_printf("get_IEEE_phy_speed(): Invalid speed bit value, Deafulting to Speed = 10 Mbps\r\n");
- XEmacPs_PhyRead(xemacpsp, phy_addr, 0, &temp);
- XEmacPs_PhyWrite(xemacpsp, phy_addr, 0, 0x0100);
- return 10;
- }
-#else
- if ( ((partner_capabilities >> 14) & 3) == 2)/* 1000Mbps */
- return 1000;
- else if ( ((partner_capabilities >> 14) & 3) == 1)/* 100Mbps */
- return 100;
- else /* 10Mbps */
- return 10;
-#endif
-}
-#endif
-
-unsigned configure_IEEE_phy_speed(XEmacPs *xemacpsp, unsigned speed)
-{
- u16 control;
- u32 phy_addr = detect_phy(xemacpsp);
-
- XEmacPs_PhyWrite(xemacpsp,phy_addr, IEEE_PAGE_ADDRESS_REGISTER, 2);
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_MAC, &control);
- control |= IEEE_RGMII_TXRX_CLOCK_DELAYED_MASK;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_MAC, control);
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_PAGE_ADDRESS_REGISTER, 0);
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG, &control);
- control |= IEEE_ASYMMETRIC_PAUSE_MASK;
- control |= IEEE_PAUSE_MASK;
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG, control);
-
- XEmacPs_PhyRead(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET, &control);
- control &= ~IEEE_CTRL_LINKSPEED_1000M;
- control &= ~IEEE_CTRL_LINKSPEED_100M;
- control &= ~IEEE_CTRL_LINKSPEED_10M;
-
- if (speed == 1000) {
- control |= IEEE_CTRL_LINKSPEED_1000M;
- }
-
- else if (speed == 100) {
- control |= IEEE_CTRL_LINKSPEED_100M;
- /* Dont advertise PHY speed of 1000 Mbps */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_1000_ADVERTISE_REG_OFFSET, 0);
- /* Dont advertise PHY speed of 10 Mbps */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG,
- ADVERTISE_100);
- }
-
- else if (speed == 10) {
- control |= IEEE_CTRL_LINKSPEED_10M;
- /* Dont advertise PHY speed of 1000 Mbps */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_1000_ADVERTISE_REG_OFFSET,
- 0);
- /* Dont advertise PHY speed of 100 Mbps */
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_AUTONEGO_ADVERTISE_REG,
- ADVERTISE_10);
- }
-
- XEmacPs_PhyWrite(xemacpsp, phy_addr, IEEE_CONTROL_REG_OFFSET,
- control | IEEE_CTRL_RESET_MASK);
- {
- volatile int wait;
- for (wait=0; wait < 100000; wait++);
- }
- return 0;
-}
-
-static void SetUpSLCRDivisors(int mac_baseaddr, int speed)
-{
- volatile u32 slcrBaseAddress;
-#ifndef PEEP
- u32 SlcrDiv0;
- u32 SlcrDiv1=0;
- u32 SlcrTxClkCntrl;
-#endif
-
- *(volatile unsigned int *)(SLCR_UNLOCK_ADDR) = SLCR_UNLOCK_KEY_VALUE;
-
- if ((unsigned long)mac_baseaddr == EMAC0_BASE_ADDRESS) {
- slcrBaseAddress = SLCR_GEM0_CLK_CTRL_ADDR;
- } else {
- slcrBaseAddress = SLCR_GEM1_CLK_CTRL_ADDR;
- }
-#ifdef PEEP
- if (speed == 1000) {
- *(volatile unsigned int *)(slcrBaseAddress) =
- SLCR_GEM_1G_CLK_CTRL_VALUE;
- } else if (speed == 100) {
- *(volatile unsigned int *)(slcrBaseAddress) =
- SLCR_GEM_100M_CLK_CTRL_VALUE;
- } else {
- *(volatile unsigned int *)(slcrBaseAddress) =
- SLCR_GEM_10M_CLK_CTRL_VALUE;
- }
-#else
- if (speed == 1000) {
- if ((unsigned long)mac_baseaddr == EMAC0_BASE_ADDRESS) {
-#ifdef XPAR_PS7_ETHERNET_0_ENET_SLCR_1000MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_0_ENET_SLCR_1000MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_0_ENET_SLCR_1000MBPS_DIV1;
-#endif
- } else {
-#ifdef XPAR_PS7_ETHERNET_1_ENET_SLCR_1000MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_1_ENET_SLCR_1000MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_1_ENET_SLCR_1000MBPS_DIV1;
-#endif
- }
- } else if (speed == 100) {
- if ((unsigned long)mac_baseaddr == EMAC0_BASE_ADDRESS) {
-#ifdef XPAR_PS7_ETHERNET_0_ENET_SLCR_100MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_0_ENET_SLCR_100MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_0_ENET_SLCR_100MBPS_DIV1;
-#endif
- } else {
-#ifdef XPAR_PS7_ETHERNET_1_ENET_SLCR_100MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_1_ENET_SLCR_100MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_1_ENET_SLCR_100MBPS_DIV1;
-#endif
- }
- } else {
- if ((unsigned long)mac_baseaddr == EMAC0_BASE_ADDRESS) {
-#ifdef XPAR_PS7_ETHERNET_0_ENET_SLCR_10MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_0_ENET_SLCR_10MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_0_ENET_SLCR_10MBPS_DIV1;
-#endif
- } else {
-#ifdef XPAR_PS7_ETHERNET_1_ENET_SLCR_10MBPS_DIV0
- SlcrDiv0 = XPAR_PS7_ETHERNET_1_ENET_SLCR_10MBPS_DIV0;
- SlcrDiv1 = XPAR_PS7_ETHERNET_1_ENET_SLCR_10MBPS_DIV1;
-#endif
- }
- }
- SlcrTxClkCntrl = *(volatile unsigned int *)(slcrBaseAddress);
- SlcrTxClkCntrl &= EMACPS_SLCR_DIV_MASK;
- SlcrTxClkCntrl |= (SlcrDiv1 << 20);
- SlcrTxClkCntrl |= (SlcrDiv0 << 8);
- *(volatile unsigned int *)(slcrBaseAddress) = SlcrTxClkCntrl;
-#endif
- *(volatile unsigned int *)(SLCR_LOCK_ADDR) = SLCR_LOCK_KEY_VALUE;
- return;
-}
-
-
-unsigned Phy_Setup (XEmacPs *xemacpsp)
-{
- unsigned link_speed;
- unsigned long conv_present = 0;
- unsigned long convspeeddupsetting = 0;
- unsigned long convphyaddr = 0;
-
-#ifdef XPAR_GMII2RGMIICON_0N_ETH0_ADDR
- convphyaddr = XPAR_GMII2RGMIICON_0N_ETH0_ADDR;
- conv_present = 1;
-#else
-#ifdef XPAR_GMII2RGMIICON_0N_ETH1_ADDR
- convphyaddr = XPAR_GMII2RGMIICON_0N_ETH1_ADDR;
- conv_present = 1;
-#endif
-#endif
-
-#ifdef CONFIG_LINKSPEED_AUTODETECT
- link_speed = get_IEEE_phy_speed(xemacpsp);
- if (link_speed == 1000) {
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,1000);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED1000_FD;
- } else if (link_speed == 100) {
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,100);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED100_FD;
- } else {
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,10);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED10_FD;
- }
-#elif defined(CONFIG_LINKSPEED1000)
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,1000);
- link_speed = 1000;
- configure_IEEE_phy_speed(xemacpsp, link_speed);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED1000_FD;
- sleep(1);
-#elif defined(CONFIG_LINKSPEED100)
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,100);
- link_speed = 100;
- configure_IEEE_phy_speed(xemacpsp, link_speed);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED100_FD;
- sleep(1);
-#elif defined(CONFIG_LINKSPEED10)
- SetUpSLCRDivisors(xemacpsp->Config.BaseAddress,10);
- link_speed = 10;
- configure_IEEE_phy_speed(xemacpsp, link_speed);
- convspeeddupsetting = XEMACPS_GMII2RGMII_SPEED10_FD;
- sleep(1);
-#endif
- if (conv_present) {
- XEmacPs_PhyWrite(xemacpsp, convphyaddr,
- XEMACPS_GMII2RGMII_REG_NUM, convspeeddupsetting);
- }
-
- xil_printf("link speed: %d\r\n", link_speed);
- return link_speed;
-}
-
projects / freertos / blobdiff