--- /dev/null
+/**\r
+ * \file\r
+ *\r
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.\r
+ *\r
+ * \asf_license_start\r
+ *\r
+ * \page License\r
+ *\r
+ * Redistribution and use in source and binary forms, with or without\r
+ * modification, are permitted provided that the following conditions are met:\r
+ *\r
+ * 1. Redistributions of source code must retain the above copyright notice,\r
+ * this list of conditions and the following disclaimer.\r
+ *\r
+ * 2. Redistributions in binary form must reproduce the above copyright notice,\r
+ * this list of conditions and the following disclaimer in the documentation\r
+ * and/or other materials provided with the distribution.\r
+ *\r
+ * 3. The name of Atmel may not be used to endorse or promote products derived\r
+ * from this software without specific prior written permission.\r
+ *\r
+ * 4. This software may only be redistributed and used in connection with an\r
+ * Atmel microcontroller product.\r
+ *\r
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED\r
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF\r
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE\r
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR\r
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS\r
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\r
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,\r
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN\r
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE\r
+ * POSSIBILITY OF SUCH DAMAGE.\r
+ *\r
+ * \asf_license_stop\r
+ *\r
+ */\r
+\r
+#ifndef _SAM3XA_HSMCI_COMPONENT_\r
+#define _SAM3XA_HSMCI_COMPONENT_\r
+\r
+/* ============================================================================= */\r
+/** SOFTWARE API DEFINITION FOR High Speed MultiMedia Card Interface */\r
+/* ============================================================================= */\r
+/** \addtogroup SAM3XA_HSMCI High Speed MultiMedia Card Interface */\r
+/*@{*/\r
+\r
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))\r
+/** \brief Hsmci hardware registers */\r
+typedef struct {\r
+ WoReg HSMCI_CR; /**< \brief (Hsmci Offset: 0x00) Control Register */\r
+ RwReg HSMCI_MR; /**< \brief (Hsmci Offset: 0x04) Mode Register */\r
+ RwReg HSMCI_DTOR; /**< \brief (Hsmci Offset: 0x08) Data Timeout Register */\r
+ RwReg HSMCI_SDCR; /**< \brief (Hsmci Offset: 0x0C) SD/SDIO Card Register */\r
+ RwReg HSMCI_ARGR; /**< \brief (Hsmci Offset: 0x10) Argument Register */\r
+ WoReg HSMCI_CMDR; /**< \brief (Hsmci Offset: 0x14) Command Register */\r
+ RwReg HSMCI_BLKR; /**< \brief (Hsmci Offset: 0x18) Block Register */\r
+ RwReg HSMCI_CSTOR; /**< \brief (Hsmci Offset: 0x1C) Completion Signal Timeout Register */\r
+ RoReg HSMCI_RSPR[4]; /**< \brief (Hsmci Offset: 0x20) Response Register */\r
+ RoReg HSMCI_RDR; /**< \brief (Hsmci Offset: 0x30) Receive Data Register */\r
+ WoReg HSMCI_TDR; /**< \brief (Hsmci Offset: 0x34) Transmit Data Register */\r
+ RoReg Reserved1[2];\r
+ RoReg HSMCI_SR; /**< \brief (Hsmci Offset: 0x40) Status Register */\r
+ WoReg HSMCI_IER; /**< \brief (Hsmci Offset: 0x44) Interrupt Enable Register */\r
+ WoReg HSMCI_IDR; /**< \brief (Hsmci Offset: 0x48) Interrupt Disable Register */\r
+ RoReg HSMCI_IMR; /**< \brief (Hsmci Offset: 0x4C) Interrupt Mask Register */\r
+ RwReg HSMCI_DMA; /**< \brief (Hsmci Offset: 0x50) DMA Configuration Register */\r
+ RwReg HSMCI_CFG; /**< \brief (Hsmci Offset: 0x54) Configuration Register */\r
+ RoReg Reserved2[35];\r
+ RwReg HSMCI_WPMR; /**< \brief (Hsmci Offset: 0xE4) Write Protection Mode Register */\r
+ RoReg HSMCI_WPSR; /**< \brief (Hsmci Offset: 0xE8) Write Protection Status Register */\r
+ RoReg Reserved3[69];\r
+ RwReg HSMCI_FIFO[256]; /**< \brief (Hsmci Offset: 0x200) FIFO Memory Aperture0 */\r
+} Hsmci;\r
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */\r
+/* -------- HSMCI_CR : (HSMCI Offset: 0x00) Control Register -------- */\r
+#define HSMCI_CR_MCIEN (0x1u << 0) /**< \brief (HSMCI_CR) Multi-Media Interface Enable */\r
+#define HSMCI_CR_MCIDIS (0x1u << 1) /**< \brief (HSMCI_CR) Multi-Media Interface Disable */\r
+#define HSMCI_CR_PWSEN (0x1u << 2) /**< \brief (HSMCI_CR) Power Save Mode Enable */\r
+#define HSMCI_CR_PWSDIS (0x1u << 3) /**< \brief (HSMCI_CR) Power Save Mode Disable */\r
+#define HSMCI_CR_SWRST (0x1u << 7) /**< \brief (HSMCI_CR) Software Reset */\r
+/* -------- HSMCI_MR : (HSMCI Offset: 0x04) Mode Register -------- */\r
+#define HSMCI_MR_CLKDIV_Pos 0\r
+#define HSMCI_MR_CLKDIV_Msk (0xffu << HSMCI_MR_CLKDIV_Pos) /**< \brief (HSMCI_MR) Clock Divider */\r
+#define HSMCI_MR_CLKDIV(value) ((HSMCI_MR_CLKDIV_Msk & ((value) << HSMCI_MR_CLKDIV_Pos)))\r
+#define HSMCI_MR_PWSDIV_Pos 8\r
+#define HSMCI_MR_PWSDIV_Msk (0x7u << HSMCI_MR_PWSDIV_Pos) /**< \brief (HSMCI_MR) Power Saving Divider */\r
+#define HSMCI_MR_PWSDIV(value) ((HSMCI_MR_PWSDIV_Msk & ((value) << HSMCI_MR_PWSDIV_Pos)))\r
+#define HSMCI_MR_RDPROOF (0x1u << 11) /**< \brief (HSMCI_MR) */\r
+#define HSMCI_MR_WRPROOF (0x1u << 12) /**< \brief (HSMCI_MR) */\r
+#define HSMCI_MR_FBYTE (0x1u << 13) /**< \brief (HSMCI_MR) Force Byte Transfer */\r
+#define HSMCI_MR_PADV (0x1u << 14) /**< \brief (HSMCI_MR) Padding Value */\r
+/* -------- HSMCI_DTOR : (HSMCI Offset: 0x08) Data Timeout Register -------- */\r
+#define HSMCI_DTOR_DTOCYC_Pos 0\r
+#define HSMCI_DTOR_DTOCYC_Msk (0xfu << HSMCI_DTOR_DTOCYC_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Cycle Number */\r
+#define HSMCI_DTOR_DTOCYC(value) ((HSMCI_DTOR_DTOCYC_Msk & ((value) << HSMCI_DTOR_DTOCYC_Pos)))\r
+#define HSMCI_DTOR_DTOMUL_Pos 4\r
+#define HSMCI_DTOR_DTOMUL_Msk (0x7u << HSMCI_DTOR_DTOMUL_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Multiplier */\r
+#define HSMCI_DTOR_DTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_DTOR) DTOCYC */\r
+#define HSMCI_DTOR_DTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 16 */\r
+#define HSMCI_DTOR_DTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 128 */\r
+#define HSMCI_DTOR_DTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 256 */\r
+#define HSMCI_DTOR_DTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1024 */\r
+#define HSMCI_DTOR_DTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 4096 */\r
+#define HSMCI_DTOR_DTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 65536 */\r
+#define HSMCI_DTOR_DTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1048576 */\r
+/* -------- HSMCI_SDCR : (HSMCI Offset: 0x0C) SD/SDIO Card Register -------- */\r
+#define HSMCI_SDCR_SDCSEL_Pos 0\r
+#define HSMCI_SDCR_SDCSEL_Msk (0x3u << HSMCI_SDCR_SDCSEL_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Slot */\r
+#define HSMCI_SDCR_SDCSEL_SLOTA (0x0u << 0) /**< \brief (HSMCI_SDCR) Slot A is selected. */\r
+#define HSMCI_SDCR_SDCSEL_SLOTB (0x1u << 0) /**< \brief (HSMCI_SDCR) SDCARD/SDIO Slot B selected */\r
+#define HSMCI_SDCR_SDCSEL_SLOTC (0x2u << 0) /**< \brief (HSMCI_SDCR) - */\r
+#define HSMCI_SDCR_SDCSEL_SLOTD (0x3u << 0) /**< \brief (HSMCI_SDCR) - */\r
+#define HSMCI_SDCR_SDCBUS_Pos 6\r
+#define HSMCI_SDCR_SDCBUS_Msk (0x3u << HSMCI_SDCR_SDCBUS_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Bus Width */\r
+#define HSMCI_SDCR_SDCBUS_1 (0x0u << 6) /**< \brief (HSMCI_SDCR) 1 bit */\r
+#define HSMCI_SDCR_SDCBUS_4 (0x2u << 6) /**< \brief (HSMCI_SDCR) 4 bit */\r
+#define HSMCI_SDCR_SDCBUS_8 (0x3u << 6) /**< \brief (HSMCI_SDCR) 8 bit */\r
+/* -------- HSMCI_ARGR : (HSMCI Offset: 0x10) Argument Register -------- */\r
+#define HSMCI_ARGR_ARG_Pos 0\r
+#define HSMCI_ARGR_ARG_Msk (0xffffffffu << HSMCI_ARGR_ARG_Pos) /**< \brief (HSMCI_ARGR) Command Argument */\r
+#define HSMCI_ARGR_ARG(value) ((HSMCI_ARGR_ARG_Msk & ((value) << HSMCI_ARGR_ARG_Pos)))\r
+/* -------- HSMCI_CMDR : (HSMCI Offset: 0x14) Command Register -------- */\r
+#define HSMCI_CMDR_CMDNB_Pos 0\r
+#define HSMCI_CMDR_CMDNB_Msk (0x3fu << HSMCI_CMDR_CMDNB_Pos) /**< \brief (HSMCI_CMDR) Command Number */\r
+#define HSMCI_CMDR_CMDNB(value) ((HSMCI_CMDR_CMDNB_Msk & ((value) << HSMCI_CMDR_CMDNB_Pos)))\r
+#define HSMCI_CMDR_RSPTYP_Pos 6\r
+#define HSMCI_CMDR_RSPTYP_Msk (0x3u << HSMCI_CMDR_RSPTYP_Pos) /**< \brief (HSMCI_CMDR) Response Type */\r
+#define HSMCI_CMDR_RSPTYP_NORESP (0x0u << 6) /**< \brief (HSMCI_CMDR) No response. */\r
+#define HSMCI_CMDR_RSPTYP_48_BIT (0x1u << 6) /**< \brief (HSMCI_CMDR) 48-bit response. */\r
+#define HSMCI_CMDR_RSPTYP_136_BIT (0x2u << 6) /**< \brief (HSMCI_CMDR) 136-bit response. */\r
+#define HSMCI_CMDR_RSPTYP_R1B (0x3u << 6) /**< \brief (HSMCI_CMDR) R1b response type */\r
+#define HSMCI_CMDR_SPCMD_Pos 8\r
+#define HSMCI_CMDR_SPCMD_Msk (0x7u << HSMCI_CMDR_SPCMD_Pos) /**< \brief (HSMCI_CMDR) Special Command */\r
+#define HSMCI_CMDR_SPCMD_STD (0x0u << 8) /**< \brief (HSMCI_CMDR) Not a special CMD. */\r
+#define HSMCI_CMDR_SPCMD_INIT (0x1u << 8) /**< \brief (HSMCI_CMDR) Initialization CMD: 74 clock cycles for initialization sequence. */\r
+#define HSMCI_CMDR_SPCMD_SYNC (0x2u << 8) /**< \brief (HSMCI_CMDR) Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command. */\r
+#define HSMCI_CMDR_SPCMD_CE_ATA (0x3u << 8) /**< \brief (HSMCI_CMDR) CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line. */\r
+#define HSMCI_CMDR_SPCMD_IT_CMD (0x4u << 8) /**< \brief (HSMCI_CMDR) Interrupt command: Corresponds to the Interrupt Mode (CMD40). */\r
+#define HSMCI_CMDR_SPCMD_IT_RESP (0x5u << 8) /**< \brief (HSMCI_CMDR) Interrupt response: Corresponds to the Interrupt Mode (CMD40). */\r
+#define HSMCI_CMDR_SPCMD_BOR (0x6u << 8) /**< \brief (HSMCI_CMDR) Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly. */\r
+#define HSMCI_CMDR_SPCMD_EBO (0x7u << 8) /**< \brief (HSMCI_CMDR) End Boot Operation. This command allows the host processor to terminate the boot operation mode. */\r
+#define HSMCI_CMDR_OPDCMD (0x1u << 11) /**< \brief (HSMCI_CMDR) Open Drain Command */\r
+#define HSMCI_CMDR_OPDCMD_PUSHPULL (0x0u << 11) /**< \brief (HSMCI_CMDR) Push pull command. */\r
+#define HSMCI_CMDR_OPDCMD_OPENDRAIN (0x1u << 11) /**< \brief (HSMCI_CMDR) Open drain command. */\r
+#define HSMCI_CMDR_MAXLAT (0x1u << 12) /**< \brief (HSMCI_CMDR) Max Latency for Command to Response */\r
+#define HSMCI_CMDR_MAXLAT_5 (0x0u << 12) /**< \brief (HSMCI_CMDR) 5-cycle max latency. */\r
+#define HSMCI_CMDR_MAXLAT_64 (0x1u << 12) /**< \brief (HSMCI_CMDR) 64-cycle max latency. */\r
+#define HSMCI_CMDR_TRCMD_Pos 16\r
+#define HSMCI_CMDR_TRCMD_Msk (0x3u << HSMCI_CMDR_TRCMD_Pos) /**< \brief (HSMCI_CMDR) Transfer Command */\r
+#define HSMCI_CMDR_TRCMD_NO_DATA (0x0u << 16) /**< \brief (HSMCI_CMDR) No data transfer */\r
+#define HSMCI_CMDR_TRCMD_START_DATA (0x1u << 16) /**< \brief (HSMCI_CMDR) Start data transfer */\r
+#define HSMCI_CMDR_TRCMD_STOP_DATA (0x2u << 16) /**< \brief (HSMCI_CMDR) Stop data transfer */\r
+#define HSMCI_CMDR_TRDIR (0x1u << 18) /**< \brief (HSMCI_CMDR) Transfer Direction */\r
+#define HSMCI_CMDR_TRDIR_WRITE (0x0u << 18) /**< \brief (HSMCI_CMDR) Write. */\r
+#define HSMCI_CMDR_TRDIR_READ (0x1u << 18) /**< \brief (HSMCI_CMDR) Read. */\r
+#define HSMCI_CMDR_TRTYP_Pos 19\r
+#define HSMCI_CMDR_TRTYP_Msk (0x7u << HSMCI_CMDR_TRTYP_Pos) /**< \brief (HSMCI_CMDR) Transfer Type */\r
+#define HSMCI_CMDR_TRTYP_SINGLE (0x0u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Single Block */\r
+#define HSMCI_CMDR_TRTYP_MULTIPLE (0x1u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Multiple Block */\r
+#define HSMCI_CMDR_TRTYP_STREAM (0x2u << 19) /**< \brief (HSMCI_CMDR) MMC Stream */\r
+#define HSMCI_CMDR_TRTYP_BYTE (0x4u << 19) /**< \brief (HSMCI_CMDR) SDIO Byte */\r
+#define HSMCI_CMDR_TRTYP_BLOCK (0x5u << 19) /**< \brief (HSMCI_CMDR) SDIO Block */\r
+#define HSMCI_CMDR_IOSPCMD_Pos 24\r
+#define HSMCI_CMDR_IOSPCMD_Msk (0x3u << HSMCI_CMDR_IOSPCMD_Pos) /**< \brief (HSMCI_CMDR) SDIO Special Command */\r
+#define HSMCI_CMDR_IOSPCMD_STD (0x0u << 24) /**< \brief (HSMCI_CMDR) Not an SDIO Special Command */\r
+#define HSMCI_CMDR_IOSPCMD_SUSPEND (0x1u << 24) /**< \brief (HSMCI_CMDR) SDIO Suspend Command */\r
+#define HSMCI_CMDR_IOSPCMD_RESUME (0x2u << 24) /**< \brief (HSMCI_CMDR) SDIO Resume Command */\r
+#define HSMCI_CMDR_ATACS (0x1u << 26) /**< \brief (HSMCI_CMDR) ATA with Command Completion Signal */\r
+#define HSMCI_CMDR_ATACS_NORMAL (0x0u << 26) /**< \brief (HSMCI_CMDR) Normal operation mode. */\r
+#define HSMCI_CMDR_ATACS_COMPLETION (0x1u << 26) /**< \brief (HSMCI_CMDR) This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR). */\r
+#define HSMCI_CMDR_BOOT_ACK (0x1u << 27) /**< \brief (HSMCI_CMDR) Boot Operation Acknowledge. */\r
+/* -------- HSMCI_BLKR : (HSMCI Offset: 0x18) Block Register -------- */\r
+#define HSMCI_BLKR_BCNT_Pos 0\r
+#define HSMCI_BLKR_BCNT_Msk (0xffffu << HSMCI_BLKR_BCNT_Pos) /**< \brief (HSMCI_BLKR) MMC/SDIO Block Count - SDIO Byte Count */\r
+#define HSMCI_BLKR_BCNT_MULTIPLE (0x0u << 0) /**< \brief (HSMCI_BLKR) MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer. */\r
+#define HSMCI_BLKR_BCNT_BYTE (0x4u << 0) /**< \brief (HSMCI_BLKR) SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden. */\r
+#define HSMCI_BLKR_BCNT_BLOCK (0x5u << 0) /**< \brief (HSMCI_BLKR) SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden. */\r
+#define HSMCI_BLKR_BLKLEN_Pos 16\r
+#define HSMCI_BLKR_BLKLEN_Msk (0xffffu << HSMCI_BLKR_BLKLEN_Pos) /**< \brief (HSMCI_BLKR) Data Block Length */\r
+#define HSMCI_BLKR_BLKLEN(value) ((HSMCI_BLKR_BLKLEN_Msk & ((value) << HSMCI_BLKR_BLKLEN_Pos)))\r
+/* -------- HSMCI_CSTOR : (HSMCI Offset: 0x1C) Completion Signal Timeout Register -------- */\r
+#define HSMCI_CSTOR_CSTOCYC_Pos 0\r
+#define HSMCI_CSTOR_CSTOCYC_Msk (0xfu << HSMCI_CSTOR_CSTOCYC_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Cycle Number */\r
+#define HSMCI_CSTOR_CSTOCYC(value) ((HSMCI_CSTOR_CSTOCYC_Msk & ((value) << HSMCI_CSTOR_CSTOCYC_Pos)))\r
+#define HSMCI_CSTOR_CSTOMUL_Pos 4\r
+#define HSMCI_CSTOR_CSTOMUL_Msk (0x7u << HSMCI_CSTOR_CSTOMUL_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Multiplier */\r
+#define HSMCI_CSTOR_CSTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1 */\r
+#define HSMCI_CSTOR_CSTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 16 */\r
+#define HSMCI_CSTOR_CSTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 128 */\r
+#define HSMCI_CSTOR_CSTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 256 */\r
+#define HSMCI_CSTOR_CSTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1024 */\r
+#define HSMCI_CSTOR_CSTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 4096 */\r
+#define HSMCI_CSTOR_CSTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 65536 */\r
+#define HSMCI_CSTOR_CSTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1048576 */\r
+/* -------- HSMCI_RSPR[4] : (HSMCI Offset: 0x20) Response Register -------- */\r
+#define HSMCI_RSPR_RSP_Pos 0\r
+#define HSMCI_RSPR_RSP_Msk (0xffffffffu << HSMCI_RSPR_RSP_Pos) /**< \brief (HSMCI_RSPR[4]) Response */\r
+/* -------- HSMCI_RDR : (HSMCI Offset: 0x30) Receive Data Register -------- */\r
+#define HSMCI_RDR_DATA_Pos 0\r
+#define HSMCI_RDR_DATA_Msk (0xffffffffu << HSMCI_RDR_DATA_Pos) /**< \brief (HSMCI_RDR) Data to Read */\r
+/* -------- HSMCI_TDR : (HSMCI Offset: 0x34) Transmit Data Register -------- */\r
+#define HSMCI_TDR_DATA_Pos 0\r
+#define HSMCI_TDR_DATA_Msk (0xffffffffu << HSMCI_TDR_DATA_Pos) /**< \brief (HSMCI_TDR) Data to Write */\r
+#define HSMCI_TDR_DATA(value) ((HSMCI_TDR_DATA_Msk & ((value) << HSMCI_TDR_DATA_Pos)))\r
+/* -------- HSMCI_SR : (HSMCI Offset: 0x40) Status Register -------- */\r
+#define HSMCI_SR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_SR) Command Ready */\r
+#define HSMCI_SR_RXRDY (0x1u << 1) /**< \brief (HSMCI_SR) Receiver Ready */\r
+#define HSMCI_SR_TXRDY (0x1u << 2) /**< \brief (HSMCI_SR) Transmit Ready */\r
+#define HSMCI_SR_BLKE (0x1u << 3) /**< \brief (HSMCI_SR) Data Block Ended */\r
+#define HSMCI_SR_DTIP (0x1u << 4) /**< \brief (HSMCI_SR) Data Transfer in Progress */\r
+#define HSMCI_SR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_SR) HSMCI Not Busy */\r
+#define HSMCI_SR_SDIOIRQforSlotA (0x1u << 8) /**< \brief (HSMCI_SR) */\r
+#define HSMCI_SR_SDIOIRQforSlotB (0x1u << 9) /**< \brief (HSMCI_SR) */\r
+#define HSMCI_SR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_SR) SDIO Read Wait Operation Status */\r
+#define HSMCI_SR_CSRCV (0x1u << 13) /**< \brief (HSMCI_SR) CE-ATA Completion Signal Received */\r
+#define HSMCI_SR_RINDE (0x1u << 16) /**< \brief (HSMCI_SR) Response Index Error */\r
+#define HSMCI_SR_RDIRE (0x1u << 17) /**< \brief (HSMCI_SR) Response Direction Error */\r
+#define HSMCI_SR_RCRCE (0x1u << 18) /**< \brief (HSMCI_SR) Response CRC Error */\r
+#define HSMCI_SR_RENDE (0x1u << 19) /**< \brief (HSMCI_SR) Response End Bit Error */\r
+#define HSMCI_SR_RTOE (0x1u << 20) /**< \brief (HSMCI_SR) Response Time-out Error */\r
+#define HSMCI_SR_DCRCE (0x1u << 21) /**< \brief (HSMCI_SR) Data CRC Error */\r
+#define HSMCI_SR_DTOE (0x1u << 22) /**< \brief (HSMCI_SR) Data Time-out Error */\r
+#define HSMCI_SR_CSTOE (0x1u << 23) /**< \brief (HSMCI_SR) Completion Signal Time-out Error */\r
+#define HSMCI_SR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_SR) DMA Block Overrun Error */\r
+#define HSMCI_SR_DMADONE (0x1u << 25) /**< \brief (HSMCI_SR) DMA Transfer done */\r
+#define HSMCI_SR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_SR) FIFO empty flag */\r
+#define HSMCI_SR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_SR) Transfer Done flag */\r
+#define HSMCI_SR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Received */\r
+#define HSMCI_SR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Error */\r
+#define HSMCI_SR_OVRE (0x1u << 30) /**< \brief (HSMCI_SR) Overrun */\r
+#define HSMCI_SR_UNRE (0x1u << 31) /**< \brief (HSMCI_SR) Underrun */\r
+/* -------- HSMCI_IER : (HSMCI Offset: 0x44) Interrupt Enable Register -------- */\r
+#define HSMCI_IER_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IER) Command Ready Interrupt Enable */\r
+#define HSMCI_IER_RXRDY (0x1u << 1) /**< \brief (HSMCI_IER) Receiver Ready Interrupt Enable */\r
+#define HSMCI_IER_TXRDY (0x1u << 2) /**< \brief (HSMCI_IER) Transmit Ready Interrupt Enable */\r
+#define HSMCI_IER_BLKE (0x1u << 3) /**< \brief (HSMCI_IER) Data Block Ended Interrupt Enable */\r
+#define HSMCI_IER_DTIP (0x1u << 4) /**< \brief (HSMCI_IER) Data Transfer in Progress Interrupt Enable */\r
+#define HSMCI_IER_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IER) Data Not Busy Interrupt Enable */\r
+#define HSMCI_IER_SDIOIRQforSlotA (0x1u << 8) /**< \brief (HSMCI_IER) */\r
+#define HSMCI_IER_SDIOIRQforSlotB (0x1u << 9) /**< \brief (HSMCI_IER) */\r
+#define HSMCI_IER_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IER) SDIO Read Wait Operation Status Interrupt Enable */\r
+#define HSMCI_IER_CSRCV (0x1u << 13) /**< \brief (HSMCI_IER) Completion Signal Received Interrupt Enable */\r
+#define HSMCI_IER_RINDE (0x1u << 16) /**< \brief (HSMCI_IER) Response Index Error Interrupt Enable */\r
+#define HSMCI_IER_RDIRE (0x1u << 17) /**< \brief (HSMCI_IER) Response Direction Error Interrupt Enable */\r
+#define HSMCI_IER_RCRCE (0x1u << 18) /**< \brief (HSMCI_IER) Response CRC Error Interrupt Enable */\r
+#define HSMCI_IER_RENDE (0x1u << 19) /**< \brief (HSMCI_IER) Response End Bit Error Interrupt Enable */\r
+#define HSMCI_IER_RTOE (0x1u << 20) /**< \brief (HSMCI_IER) Response Time-out Error Interrupt Enable */\r
+#define HSMCI_IER_DCRCE (0x1u << 21) /**< \brief (HSMCI_IER) Data CRC Error Interrupt Enable */\r
+#define HSMCI_IER_DTOE (0x1u << 22) /**< \brief (HSMCI_IER) Data Time-out Error Interrupt Enable */\r
+#define HSMCI_IER_CSTOE (0x1u << 23) /**< \brief (HSMCI_IER) Completion Signal Timeout Error Interrupt Enable */\r
+#define HSMCI_IER_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IER) DMA Block Overrun Error Interrupt Enable */\r
+#define HSMCI_IER_DMADONE (0x1u << 25) /**< \brief (HSMCI_IER) DMA Transfer completed Interrupt Enable */\r
+#define HSMCI_IER_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IER) FIFO empty Interrupt enable */\r
+#define HSMCI_IER_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IER) Transfer Done Interrupt enable */\r
+#define HSMCI_IER_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IER) Boot Acknowledge Interrupt Enable */\r
+#define HSMCI_IER_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IER) Boot Acknowledge Error Interrupt Enable */\r
+#define HSMCI_IER_OVRE (0x1u << 30) /**< \brief (HSMCI_IER) Overrun Interrupt Enable */\r
+#define HSMCI_IER_UNRE (0x1u << 31) /**< \brief (HSMCI_IER) Underrun Interrupt Enable */\r
+/* -------- HSMCI_IDR : (HSMCI Offset: 0x48) Interrupt Disable Register -------- */\r
+#define HSMCI_IDR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IDR) Command Ready Interrupt Disable */\r
+#define HSMCI_IDR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IDR) Receiver Ready Interrupt Disable */\r
+#define HSMCI_IDR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IDR) Transmit Ready Interrupt Disable */\r
+#define HSMCI_IDR_BLKE (0x1u << 3) /**< \brief (HSMCI_IDR) Data Block Ended Interrupt Disable */\r
+#define HSMCI_IDR_DTIP (0x1u << 4) /**< \brief (HSMCI_IDR) Data Transfer in Progress Interrupt Disable */\r
+#define HSMCI_IDR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IDR) Data Not Busy Interrupt Disable */\r
+#define HSMCI_IDR_SDIOIRQforSlotA (0x1u << 8) /**< \brief (HSMCI_IDR) */\r
+#define HSMCI_IDR_SDIOIRQforSlotB (0x1u << 9) /**< \brief (HSMCI_IDR) */\r
+#define HSMCI_IDR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IDR) SDIO Read Wait Operation Status Interrupt Disable */\r
+#define HSMCI_IDR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IDR) Completion Signal received interrupt Disable */\r
+#define HSMCI_IDR_RINDE (0x1u << 16) /**< \brief (HSMCI_IDR) Response Index Error Interrupt Disable */\r
+#define HSMCI_IDR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IDR) Response Direction Error Interrupt Disable */\r
+#define HSMCI_IDR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IDR) Response CRC Error Interrupt Disable */\r
+#define HSMCI_IDR_RENDE (0x1u << 19) /**< \brief (HSMCI_IDR) Response End Bit Error Interrupt Disable */\r
+#define HSMCI_IDR_RTOE (0x1u << 20) /**< \brief (HSMCI_IDR) Response Time-out Error Interrupt Disable */\r
+#define HSMCI_IDR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IDR) Data CRC Error Interrupt Disable */\r
+#define HSMCI_IDR_DTOE (0x1u << 22) /**< \brief (HSMCI_IDR) Data Time-out Error Interrupt Disable */\r
+#define HSMCI_IDR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IDR) Completion Signal Time out Error Interrupt Disable */\r
+#define HSMCI_IDR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IDR) DMA Block Overrun Error Interrupt Disable */\r
+#define HSMCI_IDR_DMADONE (0x1u << 25) /**< \brief (HSMCI_IDR) DMA Transfer completed Interrupt Disable */\r
+#define HSMCI_IDR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IDR) FIFO empty Interrupt Disable */\r
+#define HSMCI_IDR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IDR) Transfer Done Interrupt Disable */\r
+#define HSMCI_IDR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IDR) Boot Acknowledge Interrupt Disable */\r
+#define HSMCI_IDR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IDR) Boot Acknowledge Error Interrupt Disable */\r
+#define HSMCI_IDR_OVRE (0x1u << 30) /**< \brief (HSMCI_IDR) Overrun Interrupt Disable */\r
+#define HSMCI_IDR_UNRE (0x1u << 31) /**< \brief (HSMCI_IDR) Underrun Interrupt Disable */\r
+/* -------- HSMCI_IMR : (HSMCI Offset: 0x4C) Interrupt Mask Register -------- */\r
+#define HSMCI_IMR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IMR) Command Ready Interrupt Mask */\r
+#define HSMCI_IMR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IMR) Receiver Ready Interrupt Mask */\r
+#define HSMCI_IMR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IMR) Transmit Ready Interrupt Mask */\r
+#define HSMCI_IMR_BLKE (0x1u << 3) /**< \brief (HSMCI_IMR) Data Block Ended Interrupt Mask */\r
+#define HSMCI_IMR_DTIP (0x1u << 4) /**< \brief (HSMCI_IMR) Data Transfer in Progress Interrupt Mask */\r
+#define HSMCI_IMR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IMR) Data Not Busy Interrupt Mask */\r
+#define HSMCI_IMR_SDIOIRQforSlotA (0x1u << 8) /**< \brief (HSMCI_IMR) */\r
+#define HSMCI_IMR_SDIOIRQforSlotB (0x1u << 9) /**< \brief (HSMCI_IMR) */\r
+#define HSMCI_IMR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IMR) SDIO Read Wait Operation Status Interrupt Mask */\r
+#define HSMCI_IMR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IMR) Completion Signal Received Interrupt Mask */\r
+#define HSMCI_IMR_RINDE (0x1u << 16) /**< \brief (HSMCI_IMR) Response Index Error Interrupt Mask */\r
+#define HSMCI_IMR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IMR) Response Direction Error Interrupt Mask */\r
+#define HSMCI_IMR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IMR) Response CRC Error Interrupt Mask */\r
+#define HSMCI_IMR_RENDE (0x1u << 19) /**< \brief (HSMCI_IMR) Response End Bit Error Interrupt Mask */\r
+#define HSMCI_IMR_RTOE (0x1u << 20) /**< \brief (HSMCI_IMR) Response Time-out Error Interrupt Mask */\r
+#define HSMCI_IMR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IMR) Data CRC Error Interrupt Mask */\r
+#define HSMCI_IMR_DTOE (0x1u << 22) /**< \brief (HSMCI_IMR) Data Time-out Error Interrupt Mask */\r
+#define HSMCI_IMR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IMR) Completion Signal Time-out Error Interrupt Mask */\r
+#define HSMCI_IMR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IMR) DMA Block Overrun Error Interrupt Mask */\r
+#define HSMCI_IMR_DMADONE (0x1u << 25) /**< \brief (HSMCI_IMR) DMA Transfer Completed Interrupt Mask */\r
+#define HSMCI_IMR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IMR) FIFO Empty Interrupt Mask */\r
+#define HSMCI_IMR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IMR) Transfer Done Interrupt Mask */\r
+#define HSMCI_IMR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Received Interrupt Mask */\r
+#define HSMCI_IMR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Error Interrupt Mask */\r
+#define HSMCI_IMR_OVRE (0x1u << 30) /**< \brief (HSMCI_IMR) Overrun Interrupt Mask */\r
+#define HSMCI_IMR_UNRE (0x1u << 31) /**< \brief (HSMCI_IMR) Underrun Interrupt Mask */\r
+/* -------- HSMCI_DMA : (HSMCI Offset: 0x50) DMA Configuration Register -------- */\r
+#define HSMCI_DMA_OFFSET_Pos 0\r
+#define HSMCI_DMA_OFFSET_Msk (0x3u << HSMCI_DMA_OFFSET_Pos) /**< \brief (HSMCI_DMA) DMA Write Buffer Offset */\r
+#define HSMCI_DMA_OFFSET(value) ((HSMCI_DMA_OFFSET_Msk & ((value) << HSMCI_DMA_OFFSET_Pos)))\r
+#define HSMCI_DMA_CHKSIZE (0x1u << 4) /**< \brief (HSMCI_DMA) DMA Channel Read and Write Chunk Size */\r
+#define HSMCI_DMA_CHKSIZE_1 (0x0u << 4) /**< \brief (HSMCI_DMA) 1 data available */\r
+#define HSMCI_DMA_CHKSIZE_4 (0x1u << 4) /**< \brief (HSMCI_DMA) 4 data available */\r
+#define HSMCI_DMA_DMAEN (0x1u << 8) /**< \brief (HSMCI_DMA) DMA Hardware Handshaking Enable */\r
+#define HSMCI_DMA_ROPT (0x1u << 12) /**< \brief (HSMCI_DMA) Read Optimization with padding */\r
+/* -------- HSMCI_CFG : (HSMCI Offset: 0x54) Configuration Register -------- */\r
+#define HSMCI_CFG_FIFOMODE (0x1u << 0) /**< \brief (HSMCI_CFG) HSMCI Internal FIFO control mode */\r
+#define HSMCI_CFG_FERRCTRL (0x1u << 4) /**< \brief (HSMCI_CFG) Flow Error flag reset control mode */\r
+#define HSMCI_CFG_HSMODE (0x1u << 8) /**< \brief (HSMCI_CFG) High Speed Mode */\r
+#define HSMCI_CFG_LSYNC (0x1u << 12) /**< \brief (HSMCI_CFG) Synchronize on the last block */\r
+/* -------- HSMCI_WPMR : (HSMCI Offset: 0xE4) Write Protection Mode Register -------- */\r
+#define HSMCI_WPMR_WP_EN (0x1u << 0) /**< \brief (HSMCI_WPMR) Write Protection Enable */\r
+#define HSMCI_WPMR_WP_KEY_Pos 8\r
+#define HSMCI_WPMR_WP_KEY_Msk (0xffffffu << HSMCI_WPMR_WP_KEY_Pos) /**< \brief (HSMCI_WPMR) Write Protection Key password */\r
+#define HSMCI_WPMR_WP_KEY(value) ((HSMCI_WPMR_WP_KEY_Msk & ((value) << HSMCI_WPMR_WP_KEY_Pos)))\r
+/* -------- HSMCI_WPSR : (HSMCI Offset: 0xE8) Write Protection Status Register -------- */\r
+#define HSMCI_WPSR_WP_VS_Pos 0\r
+#define HSMCI_WPSR_WP_VS_Msk (0xfu << HSMCI_WPSR_WP_VS_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation Status */\r
+#define HSMCI_WPSR_WP_VS_NONE (0x0u << 0) /**< \brief (HSMCI_WPSR) No Write Protection Violation occurred since the last read of this register (WP_SR) */\r
+#define HSMCI_WPSR_WP_VS_WRITE (0x1u << 0) /**< \brief (HSMCI_WPSR) Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.) */\r
+#define HSMCI_WPSR_WP_VS_RESET (0x2u << 0) /**< \brief (HSMCI_WPSR) Software reset had been performed while Write Protection was enabled (since the last read). */\r
+#define HSMCI_WPSR_WP_VS_BOTH (0x3u << 0) /**< \brief (HSMCI_WPSR) Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read. */\r
+#define HSMCI_WPSR_WP_VSRC_Pos 8\r
+#define HSMCI_WPSR_WP_VSRC_Msk (0xffffu << HSMCI_WPSR_WP_VSRC_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation SouRCe */\r
+/* -------- HSMCI_FIFO[256] : (HSMCI Offset: 0x200) FIFO Memory Aperture0 -------- */\r
+#define HSMCI_FIFO_DATA_Pos 0\r
+#define HSMCI_FIFO_DATA_Msk (0xffffffffu << HSMCI_FIFO_DATA_Pos) /**< \brief (HSMCI_FIFO[256]) Data to Read or Data to Write */\r
+#define HSMCI_FIFO_DATA(value) ((HSMCI_FIFO_DATA_Msk & ((value) << HSMCI_FIFO_DATA_Pos)))\r
+\r
+/*@}*/\r
+\r
+\r
+#endif /* _SAM3XA_HSMCI_COMPONENT_ */\r
projects / freertos / blobdiff