/*
* -------------------------------------------
- * MSP432 DriverLib - v01_04_00_18
+ * MSP432 DriverLib - v3_10_00_09
* -------------------------------------------
*
* --COPYRIGHT--,BSD,BSD
- * Copyright (c) 2015, Texas Instruments Incorporated
+ * Copyright (c) 2014, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <msp.h>
/* Module defines for Comp */
-#define COMP_E_CMSIS(x) ((COMP_E0_Type *) x)
+#define COMP_E_CMSIS(x) ((COMP_E_Type *) x)
#define COMP_E_FILTEROUTPUT_OFF 0x00
-#define COMP_E_FILTEROUTPUT_DLYLVL1 (CEF + CEFDLY_0)
-#define COMP_E_FILTEROUTPUT_DLYLVL2 (CEF + CEFDLY_1)
-#define COMP_E_FILTEROUTPUT_DLYLVL3 (CEF + CEFDLY_2)
-#define COMP_E_FILTEROUTPUT_DLYLVL4 (CEF + CEFDLY_3)
+#define COMP_E_FILTEROUTPUT_DLYLVL1 (COMP_E_CTL1_F + COMP_E_CTL1_FDLY_0)
+#define COMP_E_FILTEROUTPUT_DLYLVL2 (COMP_E_CTL1_F + COMP_E_CTL1_FDLY_1)
+#define COMP_E_FILTEROUTPUT_DLYLVL3 (COMP_E_CTL1_F + COMP_E_CTL1_FDLY_2)
+#define COMP_E_FILTEROUTPUT_DLYLVL4 (COMP_E_CTL1_F + COMP_E_CTL1_FDLY_3)
#define COMP_E_INPUT0 (0x01)
#define COMP_E_INPUT1 (0x02)
#define COMP_E_INPUT15 (0x8000)
#define COMP_E_VREF (0x9F)
-#define COMP_E_NORMALOUTPUTPOLARITY (!(CEOUTPOL))
-#define COMP_E_INVERTEDOUTPUTPOLARITY (CEOUTPOL)
+#define COMP_E_NORMALOUTPUTPOLARITY (!(COMP_E_CTL1_OUTPOL))
+#define COMP_E_INVERTEDOUTPUTPOLARITY (COMP_E_CTL1_OUTPOL)
-#define COMP_E_REFERENCE_AMPLIFIER_DISABLED (CEREFL_0)
-#define COMP_E_VREFBASE1_2V (CEREFL_1)
-#define COMP_E_VREFBASE2_0V (CEREFL_2)
-#define COMP_E_VREFBASE2_5V (CEREFL_3)
+#define COMP_E_REFERENCE_AMPLIFIER_DISABLED (COMP_E_CTL2_CEREFL_0)
+#define COMP_E_VREFBASE1_2V (COMP_E_CTL2_CEREFL_1)
+#define COMP_E_VREFBASE2_0V (COMP_E_CTL2_CEREFL_2)
+#define COMP_E_VREFBASE2_5V (COMP_E_CTL2_CEREFL_3)
-#define COMP_E_ACCURACY_STATIC (!CEREFACC)
-#define COMP_E_ACCURACY_CLOCKED (CEREFACC)
+#define COMP_E_ACCURACY_STATIC (!COMP_E_CTL2_REFACC)
+#define COMP_E_ACCURACY_CLOCKED (COMP_E_CTL2_REFACC)
-#define COMP_E_HIGH_SPEED_MODE (CEPWRMD_0)
-#define COMP_E_NORMAL_MODE (CEPWRMD_1)
-#define COMP_E_ULTRA_LOW_POWER_MODE (CEPWRMD_2)
+#define COMP_E_HIGH_SPEED_MODE (COMP_E_CTL1_PWRMD_0)
+#define COMP_E_NORMAL_MODE (COMP_E_CTL1_PWRMD_1)
+#define COMP_E_ULTRA_LOW_POWER_MODE (COMP_E_CTL1_PWRMD_2)
-#define COMP_E_OUTPUT_INTERRUPT (CEIE)
-#define COMP_E_INVERTED_POLARITY_INTERRUPT (CEIIE)
-#define COMP_E_READY_INTERRUPT (CERDYIE)
+#define COMP_E_OUTPUT_INTERRUPT (COMP_E_INT_IE)
+#define COMP_E_INVERTED_POLARITY_INTERRUPT (COMP_E_INT_IIE)
+#define COMP_E_READY_INTERRUPT (COMP_E_INT_RDYIE)
-#define COMP_E_OUTPUT_INTERRUPT_FLAG (CEIFG)
-#define COMP_E_INTERRUPT_FLAG_INVERTED_POLARITY (CEIIFG)
-#define COMP_E_INTERRUPT_FLAG_READY (CERDYIFG)
+#define COMP_E_OUTPUT_INTERRUPT_FLAG (COMP_E_INT_IFG)
+#define COMP_E_INTERRUPT_FLAG_INVERTED_POLARITY (COMP_E_INT_IIFG)
+#define COMP_E_INTERRUPT_FLAG_READY (COMP_E_INT_RDYIFG)
-#define COMP_E_FALLINGEDGE (!(CEIES))
-#define COMP_E_RISINGEDGE (CEIES)
+#define COMP_E_FALLINGEDGE (!(COMP_E_CTL1_IES))
+#define COMP_E_RISINGEDGE (COMP_E_CTL1_IES)
-#define COMP_E_LOW (0x0)
-#define COMP_E_HIGH (CEOUT)
+#define COMP_E_LOW (0x0)
+#define COMP_E_HIGH (COMP_E_CTL1_OUT)
//*****************************************************************************
//
-//! \typedef COMP_E_Config
+//! ypedef COMP_E_Config
//! \brief Type definition for \link _COMP_E_Config \endlink structure
//!
//! \struct _COMP_E_Config
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param config Configuration structure for the Comparator module
//!
//! <hr>
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param supplyVoltageReferenceBase decides the source and max amount of
//! Voltage that can be used as a reference.
//! Valid values are
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param referenceAccuracy is the reference accuracy setting of the
//! comparator. Clocked is for low power/low accuracy.
//! Valid values are
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param powerMode decides the power mode
//! Valid values are
//! - \b COMP_E_HIGH_SPEED_MODE
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function sets the bit that enables the operation of the
//! Comparator module.
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function clears the CEON bit disabling the operation of the Comparator
//! module, saving from excess power consumption.
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function sets the bit that shorts the devices attached to the input
//! pins chosen from the initialization of the comparator.
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function clears the bit that shorts the devices attached to the input
//! pins chosen from the initialization of the comparator.
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param inputPort is the port in which the input buffer will be disabled.
//! Valid values are a logical OR of the following:
//! - \b COMP_E_INPUT0 [Default]
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param inputPort is the port in which the input buffer will be enabled.
//! Valid values are a logical OR of the following:
//! - \b COMP_E_INPUT0 [Default]
//!
//! \param comparator is the instance of the Comparator module. Valid parameters
//! vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! Returns the output value of the Comparator module.
//!
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param mask is the bit mask of the interrupt sources to be enabled.
//! Mask value is the logical OR of any of the following
//! - \b COMP_E_OUTPUT_INTERRUPT - Output interrupt
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param mask is the bit mask of the interrupt sources to be disabled.
//! Mask value is the logical OR of any of the following
//! - \b COMP_E_OUTPUT_INTERRUPT - Output interrupt
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param mask is a bit mask of the interrupt sources to be cleared.
//! Mask value is the logical OR of any of the following
//! - \b COMP_E_INTERRUPT_FLAG - Output interrupt flag
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This returns the interrupt status for the Comparator module based on which
//! flag is passed.
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! Enables the indicated Comparator interrupt sources. Only the sources that
//! are enabled can be reflected to the processor interrupt; disabled sources
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//! \param edgeDirection determines which direction the edge would have to go
//! to generate an interrupt based on the non-inverted interrupt flag.
//! Valid values are
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function will toggle which direction the output will have to go,
//! whether rising or falling, to generate an interrupt based on a non-inverted
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function registers the handler to be called when a Comparator
//! interrupt occurs. This function enables the global interrupt in the
//!
//! \param comparator is the instance of the Comparator module. Valid
//! parameters vary from part to part, but can include:
-//! - \b COMP_E0
-//! - \b COMP_E1
+//! - \b COMP_E0_BASE
+//! - \b COMP_E1_BASE
//!
//! This function unregisters the handler to be called when Comparator E
//! interrupt occurs. This function also masks off the interrupt in the
projects / freertos / blobdiff