/*
* -------------------------------------------
- * MSP432 DriverLib - v01_04_00_18
+ * MSP432 DriverLib - v3_10_00_09
* -------------------------------------------
*
* --COPYRIGHT--,BSD,BSD
- * Copyright (c) 2015, Texas Instruments Incorporated
+ * Copyright (c) 2014, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <msp.h>
#include "eusci.h"
-#define DEFAULT_SYNC 0x00
-#define EUSCI_A_UART_AUTOMATICBAUDRATE_SYNC 0x55
+#define DEFAULT_SYNC 0x00
+#define EUSCI_A_UART_AUTOMATICBAUDRATE_SYNC 0x55
-#define EUSCI_A_UART_NO_PARITY 0x00
-#define EUSCI_A_UART_ODD_PARITY 0x01
-#define EUSCI_A_UART_EVEN_PARITY 0x02
+#define EUSCI_A_UART_NO_PARITY 0x00
+#define EUSCI_A_UART_ODD_PARITY 0x01
+#define EUSCI_A_UART_EVEN_PARITY 0x02
-#define EUSCI_A_UART_MSB_FIRST UCMSB
-#define EUSCI_A_UART_LSB_FIRST 0x00
+#define EUSCI_A_UART_MSB_FIRST EUSCI_A_CTLW0_MSB
+#define EUSCI_A_UART_LSB_FIRST 0x00
-#define EUSCI_A_UART_MODE UCMODE_0
-#define EUSCI_A_UART_IDLE_LINE_MULTI_PROCESSOR_MODE UCMODE_1
-#define EUSCI_A_UART_ADDRESS_BIT_MULTI_PROCESSOR_MODE UCMODE_2
-#define EUSCI_A_UART_AUTOMATIC_BAUDRATE_DETECTION_MODE UCMODE_3
+#define EUSCI_A_UART_MODE EUSCI_A_CTLW0_MODE_0
+#define EUSCI_A_UART_IDLE_LINE_MULTI_PROCESSOR_MODE EUSCI_A_CTLW0_MODE_1
+#define EUSCI_A_UART_ADDRESS_BIT_MULTI_PROCESSOR_MODE EUSCI_A_CTLW0_MODE_2
+#define EUSCI_A_UART_AUTOMATIC_BAUDRATE_DETECTION_MODE EUSCI_A_CTLW0_MODE_3
-#define EUSCI_A_UART_CLOCKSOURCE_SMCLK UCSSEL__SMCLK
-#define EUSCI_A_UART_CLOCKSOURCE_ACLK UCSSEL__ACLK
+#define EUSCI_A_UART_CLOCKSOURCE_SMCLK EUSCI_A_CTLW0_SSEL__SMCLK
+#define EUSCI_A_UART_CLOCKSOURCE_ACLK EUSCI_A_CTLW0_SSEL__ACLK
-#define EUSCI_A_UART_ONE_STOP_BIT 0x00
-#define EUSCI_A_UART_TWO_STOP_BITS UCSPB
+#define EUSCI_A_UART_ONE_STOP_BIT 0x00
+#define EUSCI_A_UART_TWO_STOP_BITS EUSCI_A_CTLW0_SPB
-#define EUSCI_A_UART_OVERSAMPLING_BAUDRATE_GENERATION 0x01
-#define EUSCI_A_UART_LOW_FREQUENCY_BAUDRATE_GENERATION 0x00
+#define EUSCI_A_UART_OVERSAMPLING_BAUDRATE_GENERATION 0x01
+#define EUSCI_A_UART_LOW_FREQUENCY_BAUDRATE_GENERATION 0x00
-#define EUSCI_A_UART_RECEIVE_INTERRUPT UCRXIE
-#define EUSCI_A_UART_TRANSMIT_INTERRUPT UCTXIE
-#define EUSCI_A_UART_RECEIVE_ERRONEOUSCHAR_INTERRUPT UCRXEIE
-#define EUSCI_A_UART_BREAKCHAR_INTERRUPT UCBRKIE
-#define EUSCI_A_UART_STARTBIT_INTERRUPT UCSTTIE
-#define EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT UCTXCPTIE
+#define EUSCI_A_UART_RECEIVE_INTERRUPT EUSCI_A_IE_RXIE
+#define EUSCI_A_UART_TRANSMIT_INTERRUPT EUSCI_A_IE_TXIE
+#define EUSCI_A_UART_RECEIVE_ERRONEOUSCHAR_INTERRUPT EUSCI_A_CTLW0_RXEIE
+#define EUSCI_A_UART_BREAKCHAR_INTERRUPT EUSCI_A_CTLW0_BRKIE
+#define EUSCI_A_UART_STARTBIT_INTERRUPT EUSCI_A_IE_STTIE
+#define EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT EUSCI_B_IE_STPIE
-#define EUSCI_A_UART_RECEIVE_INTERRUPT_FLAG UCRXIFG
-#define EUSCI_A_UART_TRANSMIT_INTERRUPT_FLAG UCTXIFG
-#define EUSCI_A_UART_STARTBIT_INTERRUPT_FLAG UCSTTIFG
-#define EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT_FLAG UCTXCPTIFG
+#define EUSCI_A_UART_RECEIVE_INTERRUPT_FLAG EUSCI_A_IFG_RXIFG
+#define EUSCI_A_UART_TRANSMIT_INTERRUPT_FLAG EUSCI_A_IFG_TXIFG
+#define EUSCI_A_UART_STARTBIT_INTERRUPT_FLAG EUSCI_A_IFG_STTIFG
+#define EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT_FLAG EUSCI_A_IFG_TXCPTIFG
-#define EUSCI_A_UART_LISTEN_ENABLE UCLISTEN
-#define EUSCI_A_UART_FRAMING_ERROR UCFE
-#define EUSCI_A_UART_OVERRUN_ERROR UCOE
-#define EUSCI_A_UART_PARITY_ERROR UCPE
-#define EUSCI_A_UART_BREAK_DETECT UCBRK
-#define EUSCI_A_UART_RECEIVE_ERROR UCRXERR
-#define EUSCI_A_UART_ADDRESS_RECEIVED UCADDR
-#define EUSCI_A_UART_IDLELINE UCIDLE
-#define EUSCI_A_UART_BUSY UCBUSY
+#define EUSCI_A_UART_LISTEN_ENABLE EUSCI_A_STATW_LISTEN
+#define EUSCI_A_UART_FRAMING_ERROR EUSCI_A_STATW_FE
+#define EUSCI_A_UART_OVERRUN_ERROR EUSCI_A_STATW_OE
+#define EUSCI_A_UART_PARITY_ERROR EUSCI_A_STATW_PE
+#define EUSCI_A_UART_BREAK_DETECT EUSCI_A_STATW_BRK
+#define EUSCI_A_UART_RECEIVE_ERROR EUSCI_A_STATW_RXERR
+#define EUSCI_A_UART_ADDRESS_RECEIVED EUSCI_A_STATW_ADDR_IDLE
+#define EUSCI_A_UART_IDLELINE EUSCI_A_STATW_ADDR_IDLE
+#define EUSCI_A_UART_BUSY EUSCI_A_STATW_BUSY
-#define EUSCI_A_UART_DEGLITCH_TIME_2ns 0x00
-#define EUSCI_A_UART_DEGLITCH_TIME_50ns 0x0001
-#define EUSCI_A_UART_DEGLITCH_TIME_100ns 0x0002
-#define EUSCI_A_UART_DEGLITCH_TIME_200ns (0x0001 + 0x0002)
+#define EUSCI_A_UART_DEGLITCH_TIME_2ns 0x00
+#define EUSCI_A_UART_DEGLITCH_TIME_50ns 0x0001
+#define EUSCI_A_UART_DEGLITCH_TIME_100ns 0x0002
+#define EUSCI_A_UART_DEGLITCH_TIME_200ns (0x0001 + 0x0002)
//*****************************************************************************
//
-//! \typedef eUSCI_eUSCI_UART_Config
+//! ypedef eUSCI_eUSCI_UART_Config
//! \brief Type definition for \link _eUSCI_UART_Config \endlink
//! structure
//!
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! \param config Configuration structure for the UART module
//!
//! <hr>
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! asEUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode.
//!
//! \param moduleInstance is the instance of the eUSCI A (UART) module.
//! Valid parameters vary from part to part, but can include:
-//! - \b EUSCI_A0_MODULE
-//! - \b EUSCI_A1_MODULE
-//! - \b EUSCI_A2_MODULE
-//! - \b EUSCI_A3_MODULE
+//! - \b EUSCI_A0_BASE
+//! - \b EUSCI_A1_BASE
+//! - \b EUSCI_A2_BASE
+//! - \b EUSCI_A3_BASE
//! <br> It is important to note that for eUSCI modules, only "A" modules such
//! as EUSCI_A0 can be used. "B" modules such as EUSCI_B0 do not support the
//! UART mode.
projects / freertos / blobdiff