/*\r
- FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd. \r
+ FreeRTOS V8.0.0:rc1 - Copyright (C) 2014 Real Time Engineers Ltd.\r
All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
1 tab == 4 spaces!\r
*/\r
\r
+/******************************************************************************\r
+ * NOTE 1: This project provides two demo applications. A simple blinky style\r
+ * project, and a more comprehensive test and demo application that makes use of\r
+ * the FreeRTOS+CLI, FreeRTOS+UDP and FreeRTOS+FAT SL components. The\r
+ * mainCREATE_SIMPLE_BLINKY_DEMO_ONLY setting in main.c is used to select\r
+ * between the two. See the notes on using mainCREATE_SIMPLE_BLINKY_DEMO_ONLY\r
+ * in main.c. This file implements the comprehensive test and demo version,\r
+ * which is fully documented on the following URL:\r
+ * http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html\r
+ *\r
+ * NOTE 2: This file only contains the source code that is specific to the\r
+ * full demo. Generic functions, such FreeRTOS hook functions, and functions\r
+ * required to configure the hardware, are defined in main.c.\r
+ ******************************************************************************\r
+ *\r
+ * Full user instructions are provided on the following URL:\r
+ * http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html\r
+ *\r
+ * main_full():\r
+ * + Uses FreeRTOS+FAT SL to create a set of example files on a RAM disk.\r
+ * + Displays some bitmaps on the LCD.\r
+ * + Registers sample generic, file system related and UDP related commands\r
+ * with FreeRTOS+CLI.\r
+ * + Creates all the standard demo application tasks and software timers.\r
+ * + Starts the scheduler.\r
+ *\r
+ * A UDP command server and optionally two UDP echo client tasks are created\r
+ * from the network event hook after an IP address has been obtained. The IP\r
+ * address is displayed on the LCD.\r
+ *\r
+ * A "check software timer" is created to provide visual feedback of the system\r
+ * status. The timer's period is initially set to three seconds. The callback\r
+ * function associated with the timer checks all the standard demo tasks are not\r
+ * only still executed, but are executing without reporting any errors. If the\r
+ * timer discovers a task has either stalled, or reported an error, then it\r
+ * changes its own period from the initial three seconds, to just 200ms. The\r
+ * check software timer also toggles the LED marked D4 - so if the LED toggles\r
+ * every three seconds then no potential errors have been found, and if the LED\r
+ * toggles every 200ms then a potential error has been found in at least one\r
+ * task.\r
+ *\r
+ * Information on accessing the CLI and file system, and using the UDP echo\r
+ * tasks is provided on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html\r
+ *\r
+ */\r
+\r
/* FreeRTOS includes. */\r
#include "FreeRTOS.h"\r
#include "task.h"\r
/* Misc. */\r
#define mainDONT_BLOCK ( 0 )\r
\r
-/* Note: If the application is started without the network cable plugged in \r
+/* Note: If the application is started without the network cable plugged in\r
then ipconfigUDP_TASK_PRIORITY should be set to 0 in FreeRTOSIPConfig.h to\r
-ensure the IP task is created at the idle priority. This is because the Atmel \r
-ASF GMAC driver polls the GMAC looking for a connection, and doing so will \r
-prevent any lower priority tasks from executing. In this demo the IP task is \r
-started at the idle priority, then set to configMAX_PRIORITIES - 2 in the \r
+ensure the IP task is created at the idle priority. This is because the Atmel\r
+ASF GMAC driver polls the GMAC looking for a connection, and doing so will\r
+prevent any lower priority tasks from executing. In this demo the IP task is\r
+started at the idle priority, then set to configMAX_PRIORITIES - 2 in the\r
network event hook only after a connection has been established (when the event\r
-passed into the network event hook is eNetworkUp). */\r
-#define mainCONNECTED_IP_TASK_PRIORITY ( configMAX_PRIORITIES - 2 )\r
+passed into the network event hook is eNetworkUp).\r
+http://www.FreeRTOS.org/udp */\r
+#define mainCONNECTED_IP_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )\r
#define mainDISCONNECTED_IP_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
\r
/* UDP command server task parameters. */\r
#define mainUDP_CLI_PORT_NUMBER ( 5001UL )\r
#define mainUDP_CLI_TASK_STACK_SIZE ( configMINIMAL_STACK_SIZE * 2U )\r
\r
-/* Set to 1 to include the UDP echo client tasks. */\r
+/* Set to 1 to include the UDP echo client tasks in the build. The echo clients\r
+require the IP address of the echo server to be defined using the\r
+configECHO_SERVER_ADDR0 to configECHO_SERVER_ADDR3 constants in\r
+FreeRTOSConfig.h. */\r
#define mainINCLUDE_ECHO_CLIENT_TASKS 1\r
\r
/*-----------------------------------------------------------*/\r
*/\r
static void prvCheckTimerCallback( xTimerHandle xTimer );\r
\r
-/* \r
- * Creates a set of sample files on a RAM disk. \r
+/*\r
+ * Creates a set of sample files on a RAM disk. http://www.FreeRTOS.org/fat_sl\r
*/\r
extern void vCreateAndVerifySampleFiles( void );\r
\r
/*\r
- * Register the generic commands that can be used with FreeRTOS+CLI.\r
+ * Register sample generic commands that can be used with FreeRTOS+CLI. Type\r
+ * 'help' in the command line to see a list of registered commands.\r
+ * http://www.FreeRTOS.org/cli\r
*/\r
extern void vRegisterSampleCLICommands( void );\r
\r
/*\r
- * Register the file system commands that can be used with FreeRTOS+CLI.\r
+ * Register sample file system commands that can be used with FreeRTOS+CLI.\r
*/\r
extern void vRegisterFileSystemCLICommands( void );\r
\r
/*\r
- * Register the UDP related commands that can be used with FreeRTOS+CLI.\r
+ * Register sample UDP related commands that can be used with FreeRTOS+CLI.\r
*/\r
extern void vRegisterUDPCLICommands( void );\r
\r
const uint8_t ucMACAddress[ 6 ] = { configMAC_ADDR0, configMAC_ADDR1, configMAC_ADDR2, configMAC_ADDR3, configMAC_ADDR4, configMAC_ADDR5 };\r
\r
/*-----------------------------------------------------------*/\r
+\r
int main_full( void )\r
{\r
xTimerHandle xTimer = NULL;\r
\r
- /* Initialise the LCD and output the bitmap. */\r
+ /* Usage instructions on http://www.FreeRTOS.org/Atmel_SAM4E_RTOS_Demo.html */\r
+\r
+ /* Initialise the LCD and output a bitmap. The IP address will also be\r
+ displayed on the LCD when it has been obtained. */\r
vInitialiseLCD();\r
\r
/* If the file system is only going to be accessed from one task then\r
before the RTOS scheduler is started. If the file system is going to be\r
access from more than one task then F_FS_THREAD_AWARE must be set to 1 and\r
the set of sample files are created from the idle task hook function\r
- vApplicationIdleHook() - which is defined in this file. */\r
+ vApplicationIdleHook(). */\r
#if( F_FS_THREAD_AWARE == 0 )\r
{\r
/* Initialise the drive and file system, then create a few example\r
- files. The output from this function just goes to the stdout window,\r
- allowing the output to be viewed when the UDP command console is not\r
- connected. */\r
+ files. The files can be viewed and accessed via the CLI. View the\r
+ documentation page for this demo (link at the top of this file) for more\r
+ information. */\r
vCreateAndVerifySampleFiles();\r
}\r
#endif\r
\r
- /* Register example generic, file system related and UDP related CLI \r
- commands respectively. */\r
+ /* Register example generic, file system related and UDP related CLI\r
+ commands respectively. Type 'help' into the command console to view a list\r
+ of registered commands. */\r
vRegisterSampleCLICommands();\r
vRegisterFileSystemCLICommands();\r
vRegisterUDPCLICommands();\r
created in the network event hook when the network is connected and ready\r
for use. The address values passed in here are used if ipconfigUSE_DHCP is\r
set to 0, or if ipconfigUSE_DHCP is set to 1 but a DHCP server cannot be\r
- contacted. The Nabto service task is created automatically if\r
- ipconfigFREERTOS_PLUS_NABTO is set to 1 in FreeRTOSIPConfig.h. */\r
+ contacted. The IP address actually used is displayed on the LCD (after DHCP\r
+ has completed if DHCP is used). */\r
FreeRTOS_IPInit( ucIPAddress, ucNetMask, ucGatewayAddress, ucDNSServerAddress, ucMACAddress );\r
\r
/* Create all the other standard demo tasks. */\r
\r
/* Create the software timer that performs the 'check' functionality, as\r
described at the top of this file. */\r
- xTimer = xTimerCreate( ( const signed char * ) "CheckTimer",/* A text name, purely to help debugging. */\r
- ( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */\r
- pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */\r
- ( void * ) 0, /* The ID is not used, so can be set to anything. */\r
- prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */\r
+ xTimer = xTimerCreate( "CheckTimer", /* A text name, purely to help debugging. */\r
+ ( mainCHECK_TIMER_PERIOD_MS ), /* The timer period, in this case 3000ms (3s). */\r
+ pdTRUE, /* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */\r
+ ( void * ) 0, /* The ID is not used, so can be set to anything. */\r
+ prvCheckTimerCallback ); /* The callback function that inspects the status of all the other tasks. */\r
\r
if( xTimer != NULL )\r
{\r
}\r
}\r
\r
+ /* Toggle the LED to give visual feedback of the system status. The rate at\r
+ which the LED toggles will increase to mainERROR_CHECK_TIMER_PERIOD_MS if a\r
+ suspected error has been found in any of the standard demo tasks. */\r
vParTestToggleLED( mainCHECK_LED );\r
}\r
/*-----------------------------------------------------------*/\r
passed into the network event hook is eNetworkUp). */\r
if( eNetworkEvent == eNetworkUp )\r
{\r
+ /* Ensure tasks are only created once. */\r
if( lTasksAlreadyCreated == pdFALSE )\r
- { \r
- /* Create the task that handles the CLI on a UDP port. The port number\r
- is set using the configUDP_CLI_PORT_NUMBER setting in FreeRTOSConfig.h. */\r
+ {\r
+ /* Create the task that handles the CLI on a UDP port. The port\r
+ number is set using the configUDP_CLI_PORT_NUMBER setting in\r
+ FreeRTOSConfig.h. */\r
vStartUDPCommandInterpreterTask( mainUDP_CLI_TASK_STACK_SIZE, mainUDP_CLI_PORT_NUMBER, mainUDP_CLI_TASK_PRIORITY );\r
- \r
+\r
#if( mainINCLUDE_ECHO_CLIENT_TASKS == 1 )\r
{\r
+ /* Create the UDP echo tasks. The UDP echo tasks require the IP\r
+ address of the echo server to be defined using the\r
+ configECHO_SERVER_ADDR0 to configECHO_SERVER_ADDR3 constants in\r
+ FreeRTOSConfig.h. */\r
vStartEchoClientTasks( configMINIMAL_STACK_SIZE, tskIDLE_PRIORITY );\r
}\r
#endif\r
}\r
- \r
- /* Obtain the IP address, convert it to a string, then display. */\r
+\r
+ /* Obtain the IP address, convert it to a string, then display it on the\r
+ LCD. */\r
FreeRTOS_GetAddressConfiguration( &ulIPAddress, NULL, NULL, NULL );\r
FreeRTOS_inet_ntoa( ulIPAddress, cIPAddress );\r
ili93xx_draw_string( ulXCoord, ulYCoord, ( uint8_t * ) "IP: " );\r
ili93xx_draw_string( ulXCoord + ulIPAddressOffset, ulYCoord, ( uint8_t * ) cIPAddress );\r
- \r
- /* Set the IP task up to the desired priority now it has connected. */\r
+\r
+ /* Set the priority of the IP task up to the desired priority now it has\r
+ connected. */\r
vTaskPrioritySet( NULL, mainCONNECTED_IP_TASK_PRIORITY );\r
}\r
\r
+ /* NOTE: At the time of writing the Ethernet driver does not report the\r
+ cable being unplugged - so the following if() condition will never be met.\r
+ It is included for possible future updates to the driver. */\r
if( eNetworkEvent == eNetworkDown )\r
{\r
+ /* Ensure the Atmel GMAC drivers don't hog all the CPU time as they look\r
+ for a new connection by lowering the priority of the IP task to that of\r
+ the Idle task. */\r
vTaskPrioritySet( NULL, tskIDLE_PRIORITY );\r
+\r
+ /* Disconnected - so no IP address. */\r
+ ili93xx_draw_string( ulXCoord, ulYCoord, ( uint8_t * ) "IP: " );\r
}\r
}\r
/*-----------------------------------------------------------*/\r
\r
void vFullDemoIdleHook( void )\r
-{ \r
+{\r
/* If the file system is only going to be accessed from one task then\r
F_FS_THREAD_AWARE can be set to 0 and the set of example files is created\r
before the RTOS scheduler is started. If the file system is going to be\r
\r
void vFullDemoTickHook( void )\r
{\r
- /* Call the periodic queue overwrite from ISR demo. */\r
+ /* Call the periodic queue overwrite from ISR test function. */\r
vQueueOverwritePeriodicISRDemo();\r
\r
- /* Call the queue set ISR test function. */\r
+ /* Call the periodic queue set ISR test function. */\r
vQueueSetAccessQueueSetFromISR();\r
}\r
/*-----------------------------------------------------------*/\r
/* Called automatically when a reply to an outgoing ping is received. */\r
void vApplicationPingReplyHook( ePingReplyStatus_t eStatus, uint16_t usIdentifier )\r
{\r
- /* This demo has nowhere to output any information so does nothing. */\r
+ /* This demo has nowhere to output any information so does nothing, but the\r
+ IP address resolved for the pined URL is displayed in the CLI. */\r
( void ) usIdentifier;\r
( void ) eStatus;\r
}\r