--- /dev/null
+/*
+ * Copyright (C) 2017 C-SKY Microsystems Co., Ltd. All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/******************************************************************************
+ * @file drv_errno.h
+ * @brief header file for error num
+ * @version V1.0
+ * @date 02. June 2017
+ ******************************************************************************/
+
+/******************************************************************************
+ * @file
+ * @details Error code field difination
+ * Error number is devided into 4 field:
+ * 0x8******* : 8 : means < 0
+ * 0x*A****** : A : means type number: bsp(1), driver(2), hal(3), app(4)...
+ * 0x**AB**** : AB : means module number: timer(1), rtc(2), ....
+ * 0x****AB** : AB : means API number: module API's definition
+ * 0x******AB : AB : means sub error number
+ * 0 ~ 0x80 is common error such as EPERM, refer to errno.h
+ * 0x80 ~ 0xFF is specific error, can difine in module
+ *
+ * For example 0x81020113 means:
+ * 1. 0x8*******: value < 0, means error happened
+ * 2. 0x*1******: type number is 1, means bsp error
+ * 3. 0x**02****: module number is 02, means RTC error
+ * 4. 0x****01**: module API is 01, means RTC's init
+ * 5. 0x******13: specific error is 0x13=19=ENODEV, means no such device
+ *
+ * For special bsp module example, you can return:
+ * (BSP_ERRNO_TIMER_BASE | BSP_API_RTC_INIT | EPERM) for rtc init error
+ * (BSP_ERRNO_TIMER_BASE | BSP_API_RTC_SETTIME | ENXIO) for rtc settime error
+ *
+ * Here list the common sub error number (0x******AB) below(0~127 defined in errno.h as standard err code):
+ * Code Hex Deci Meaning
+ * -------------------------------------------------------
+ * EPERM 0x01 1 Operation not permitted
+ * EIO 0x05 5 I/O error
+ * ENXIO 0x06 6 No such device or address
+ * ENOMEM 0x0C 12 Out of memory
+ * EACCES 0x0D 13 Permission denied
+ * EINVAL 0x16 22 Invalid argument
+ * ...
+ * SPEC_ERR_BASE 0x80 128 module special error number base
+ * ...
+ * ERRNO_MAX 0xFF -- Max sub error number
+ ******************************************************************************/
+
+#ifndef _DRV_ERRNO_H_
+#define _DRV_ERRNO_H_
+
+
+#include <errno.h>
+
+#define ERRNO_DRV_START 0X80
+
+/* drvier General return codes */
+typedef enum {
+ EDRV = ERRNO_DRV_START, ///< Unspecified error
+ EDRV_BUSY, ///< Driver is busy
+ EDRV_TIMEOUT, ///< Timeout occurred
+ EDRV_UNSUPPORTED, ///< Operation not supported
+ EDRV_PARAMETER, ///< Parameter error
+ EDRV_SPECIFIC ///< Start of driver specific errors
+} drv_common_err_e;
+
+
+/** Get error type */
+#define GET_ERROR_TYPE(errno) \
+ (error & 0xFF000000 >> 24)
+/** Get error module */
+#define GET_ERROR_MODULE(error) \
+ (error & 0x00FF0000 >> 16)
+/** Get error API */
+#define GET_ERROR_API(error) \
+ (error & 0x0000FF00 >> 8)
+/** Get errno */
+#define GET_ERROR_NUM(error) \
+ (error & 0x000000FF)
+
+#ifndef CSI_DRV_ERRNO_BASE
+/** means bsp errors */
+#define CSI_DRV_ERRNO_BASE 0x81000000
+#endif
+
+/** driver module id definition*/
+#define CSI_DRV_ERRNO_GPIO_BASE 0x81010000
+#define CSI_DRV_ERRNO_USART_BASE 0x81020000
+#define CSI_DRV_ERRNO_SPI_BASE 0x81030000
+#define CSI_DRV_ERRNO_I2C_BASE 0x81040000
+#define CSI_DRV_ERRNO_FLASH_BASE 0x81050000
+#define CSI_DRV_ERRNO_PWM_BASE 0x81060000
+#define CSI_DRV_ERRNO_RTC_BASE 0x81070000
+#define CSI_DRV_ERRNO_TIMER_BASE 0x81080000
+#define CSI_DRV_ERRNO_WDT_BASE 0x81090000
+#define CSI_DRV_ERRNO_AES_BASE 0x810A0000
+#define CSI_DRV_ERRNO_CRC_BASE 0x810B0000
+#define CSI_DRV_ERRNO_RSA_BASE 0x810C0000
+#define CSI_DRV_ERRNO_SHA_BASE 0x810D0000
+#define CSI_DRV_ERRNO_TRNG_BASE 0x810E0000
+#define CSI_DRV_ERRNO_EFLASH_BASE 0x810F0000
+#define CSI_DRV_ERRNO_DMA_BASE 0x81100000
+#define CSI_DRV_ERRNO_NORFLASH_BASE 0x81110000
+#define CSI_DRV_ERRNO_INTC_BASE 0x81120000
+#define CSI_DRV_ERRNO_SPU_BASE 0x81110000
+#define CSI_DRV_ERRNO_TEE_BASE 0x81130000
+#define CSI_DRV_ERRNO_PMU_BASE 0x81140000
+
+#endif /* CSI_DRV_ERRNO_H */