/*\r
- FreeRTOS V7.5.1 - Copyright (C) 2013 Real Time Engineers Ltd.\r
+ FreeRTOS V8.0.0:rc1 - Copyright (C) 2014 Real Time Engineers Ltd.\r
+ All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
\r
#define portDOUBLE double\r
#define portLONG long\r
#define portSHORT short\r
-#define portSTACK_TYPE unsigned portLONG\r
-#define portBASE_TYPE portLONG\r
+#define portSTACK_TYPE uint32_t\r
+#define portBASE_TYPE long\r
+\r
+typedef portSTACK_TYPE StackType_t;\r
+typedef long BaseType_t;\r
+typedef unsigned long UBaseType_t;\r
+\r
\r
#if( configUSE_16_BIT_TICKS == 1 )\r
- typedef unsigned portSHORT portTickType;\r
- #define portMAX_DELAY ( portTickType ) 0xffff\r
+ typedef uint16_t TickType_t;\r
+ #define portMAX_DELAY ( TickType_t ) 0xffff\r
#else\r
- typedef unsigned portLONG portTickType;\r
- #define portMAX_DELAY ( portTickType ) 0xffffffff\r
+ typedef uint32_t TickType_t;\r
+ #define portMAX_DELAY ( TickType_t ) 0xffffffffUL\r
#endif\r
\r
/* Hardware specifics. */\r
#define portSTACK_GROWTH ( -1 )\r
-#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) \r
+#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )\r
#define portBYTE_ALIGNMENT 4\r
\r
#define portYIELD() vPortGenerateSimulatedInterrupt( portINTERRUPT_YIELD )\r
\r
+void vPortCloseRunningThread( void *pvTaskToDelete, volatile BaseType_t *pxPendYield );\r
void vPortDeleteThread( void *pvThreadToDelete );\r
#define portCLEAN_UP_TCB( pxTCB ) vPortDeleteThread( pxTCB )\r
-#define portDISABLE_INTERRUPTS()\r
-#define portENABLE_INTERRUPTS()\r
+#define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxPendYield ) vPortCloseRunningThread( ( pvTaskToDelete ), ( pxPendYield ) )\r
+#define portDISABLE_INTERRUPTS() vPortEnterCritical()\r
+#define portENABLE_INTERRUPTS() vPortExitCritical()\r
\r
/* Critical section handling. */\r
void vPortEnterCritical( void );\r
#define portENTER_CRITICAL() vPortEnterCritical()\r
#define portEXIT_CRITICAL() vPortExitCritical()\r
\r
-#ifndef __GNUC__\r
- #if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
\r
/* Check the configuration. */\r
#if( configMAX_PRIORITIES > 32 )\r
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
#endif\r
\r
- /* Store/clear the ready priorities in a bit map. */\r
- #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
- #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
\r
\r
- /*-----------------------------------------------------------*/\r
+ /*-----------------------------------------------------------*/\r
\r
+ #ifdef __GNUC__\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) \\r
+ __asm volatile( "mov %0, %%eax \n\t" \\r
+ "bsr %%eax, %%eax \n\t" \\r
+ "mov %%eax, %1 \n\t" \\r
+ :"=r"(uxTopPriority) : "r"(uxReadyPriorities) : "eax" )\r
+ #else\r
/* BitScanReverse returns the bit position of the most significant '1'\r
in the word. */\r
- #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) _BitScanReverse( ( DWORD * ) &( uxTopPriority ), ( uxReadyPriorities ) )\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) _BitScanReverse( ( DWORD * ) &( uxTopPriority ), ( uxReadyPriorities ) ) \r
+ #endif /* __GNUC__ */\r
\r
- #endif /* taskRECORD_READY_PRIORITY */\r
-#endif /* __GNUC__ */\r
+#endif /* taskRECORD_READY_PRIORITY */\r
\r
+#ifndef __GNUC__\r
+ __pragma( warning( disable:4211 ) ) /* Nonstandard extension used, as extern is only nonstandard to MSVC. */\r
+#endif\r
\r
\r
/* Task function macros as described on the FreeRTOS.org WEB site. */\r
#define portINTERRUPT_YIELD ( 0UL )\r
#define portINTERRUPT_TICK ( 1UL )\r
\r
-/* \r
+/*\r
* Raise a simulated interrupt represented by the bit mask in ulInterruptMask.\r
* Each bit can be used to represent an individual interrupt - with the first\r
* two bits being used for the Yield and Tick interrupts respectively.\r
*/\r
-void vPortGenerateSimulatedInterrupt( unsigned long ulInterruptNumber );\r
+void vPortGenerateSimulatedInterrupt( uint32_t ulInterruptNumber );\r
\r
/*\r
- * Install an interrupt handler to be called by the simulated interrupt handler \r
+ * Install an interrupt handler to be called by the simulated interrupt handler\r
* thread. The interrupt number must be above any used by the kernel itself\r
* (at the time of writing the kernel was using interrupt numbers 0, 1, and 2\r
- * as defined above). The number must also be lower than 32. \r
+ * as defined above). The number must also be lower than 32.\r
*\r
* Interrupt handler functions must return a non-zero value if executing the\r
- * handler resulted in a task switch being required. \r
+ * handler resulted in a task switch being required.\r
*/\r
-void vPortSetInterruptHandler( unsigned long ulInterruptNumber, unsigned long (*pvHandler)( void ) );\r
+void vPortSetInterruptHandler( uint32_t ulInterruptNumber, uint32_t (*pvHandler)( void ) );\r
\r
#endif\r