/*\r
- FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.\r
+ FreeRTOS V9.0.1 - Copyright (C) 2017 Real Time Engineers Ltd.\r
All rights reserved\r
\r
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.\r
#include <stdio.h>\r
#endif /* configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) */\r
\r
-/* Sanity check the configuration. */\r
-#if( configUSE_TICKLESS_IDLE != 0 )\r
- #if( INCLUDE_vTaskSuspend != 1 )\r
- #error INCLUDE_vTaskSuspend must be set to 1 if configUSE_TICKLESS_IDLE is not set to 0\r
- #endif /* INCLUDE_vTaskSuspend */\r
-#endif /* configUSE_TICKLESS_IDLE */\r
-\r
-#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION != 1 ) )\r
- #error configSUPPORT_STATIC_ALLOCATION must be set to 1 in FreeRTOSConfig.h when the MPU is used.\r
-#endif\r
-\r
-/*\r
- * Defines the size, in words, of the stack allocated to the idle task.\r
- */\r
-#define tskIDLE_STACK_SIZE configMINIMAL_STACK_SIZE\r
-\r
#if( configUSE_PREEMPTION == 0 )\r
/* If the cooperative scheduler is being used then a yield should not be\r
performed just because a higher priority task has been woken. */\r
#define taskYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()\r
#endif\r
\r
-/* Bits that can be set in tskTCB->ucStaticAllocationFlags to indicate that the\r
-stack and TCB were statically allocated respectively. When these are statically\r
-allocated they won't be freed if the task using the stack and TCB gets\r
-deleted. */\r
-#define taskSTATICALLY_ALLOCATED_STACK ( ( uint8_t ) 0x01 )\r
-#define taskSTATICALLY_ALLOCATED_TCB ( ( uint8_t ) 0x02 )\r
-\r
/* Values that can be assigned to the ucNotifyState member of the TCB. */\r
#define taskNOT_WAITING_NOTIFICATION ( ( uint8_t ) 0 )\r
#define taskWAITING_NOTIFICATION ( ( uint8_t ) 1 )\r
#define taskNOTIFICATION_RECEIVED ( ( uint8_t ) 2 )\r
\r
-/*\r
- * Task control block. A task control block (TCB) is allocated for each task,\r
- * and stores task state information, including a pointer to the task's context\r
- * (the task's run time environment, including register values)\r
- */\r
-typedef struct tskTaskControlBlock\r
-{\r
- volatile StackType_t *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */\r
-\r
- #if ( portUSING_MPU_WRAPPERS == 1 )\r
- xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE TCB STRUCT. */\r
- #endif\r
-\r
- ListItem_t xStateListItem; /*< The list that the state list item of a task is reference from denotes the state of that task (Ready, Blocked, Suspended ). */\r
- ListItem_t xEventListItem; /*< Used to reference a task from an event list. */\r
- UBaseType_t uxPriority; /*< The priority of the task. 0 is the lowest priority. */\r
- StackType_t *pxStack; /*< Points to the start of the stack. */\r
- char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
-\r
- #if ( portSTACK_GROWTH > 0 )\r
- StackType_t *pxEndOfStack; /*< Points to the end of the stack on architectures where the stack grows up from low memory. */\r
- #endif\r
-\r
- #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
- UBaseType_t uxCriticalNesting; /*< Holds the critical section nesting depth for ports that do not maintain their own count in the port layer. */\r
- #endif\r
-\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
- UBaseType_t uxTCBNumber; /*< Stores a number that increments each time a TCB is created. It allows debuggers to determine when a task has been deleted and then recreated. */\r
- UBaseType_t uxTaskNumber; /*< Stores a number specifically for use by third party trace code. */\r
- #endif\r
-\r
- #if ( configUSE_MUTEXES == 1 )\r
- UBaseType_t uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */\r
- UBaseType_t uxMutexesHeld;\r
- #endif\r
-\r
- #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
- TaskHookFunction_t pxTaskTag;\r
- #endif\r
-\r
- #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )\r
- void *pvThreadLocalStoragePointers[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ];\r
- #endif\r
-\r
- #if( configGENERATE_RUN_TIME_STATS == 1 )\r
- uint32_t ulRunTimeCounter; /*< Stores the amount of time the task has spent in the Running state. */\r
- #endif\r
-\r
- #if ( configUSE_NEWLIB_REENTRANT == 1 )\r
- /* Allocate a Newlib reent structure that is specific to this task.\r
- Note Newlib support has been included by popular demand, but is not\r
- used by the FreeRTOS maintainers themselves. FreeRTOS is not\r
- responsible for resulting newlib operation. User must be familiar with\r
- newlib and must provide system-wide implementations of the necessary\r
- stubs. Be warned that (at the time of writing) the current newlib design\r
- implements a system-wide malloc() that must be provided with locks. */\r
- struct _reent xNewLib_reent;\r
- #endif\r
-\r
- #if( configUSE_TASK_NOTIFICATIONS == 1 )\r
- volatile uint32_t ulNotifiedValue;\r
- volatile uint8_t ucNotifyState;\r
- #endif\r
-\r
- #if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
- uint8_t ucStaticAllocationFlags; /* Set to pdTRUE if the stack is a statically allocated array, and pdFALSE if the stack is dynamically allocated. */\r
- #endif\r
-\r
- #if( INCLUDE_xTaskAbortDelay == 1 )\r
- uint8_t ucDelayAborted;\r
- #endif\r
-\r
-} tskTCB;\r
-\r
-/* The old tskTCB name is maintained above then typedefed to the new TCB_t name\r
-below to enable the use of older kernel aware debuggers. */\r
-typedef tskTCB TCB_t;\r
-\r
-/*\r
- * Some kernel aware debuggers require the data the debugger needs access to be\r
- * global, rather than file scope.\r
- */\r
-#ifdef portREMOVE_STATIC_QUALIFIER\r
- #define static\r
-#endif\r
-\r
-/*lint -e956 A manual analysis and inspection has been used to determine which\r
-static variables must be declared volatile. */\r
-\r
-PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;\r
-\r
-/* Lists for ready and blocked tasks. --------------------*/\r
-PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */\r
-PRIVILEGED_DATA static List_t xDelayedTaskList1; /*< Delayed tasks. */\r
-PRIVILEGED_DATA static List_t xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
-PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList; /*< Points to the delayed task list currently being used. */\r
-PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */\r
-PRIVILEGED_DATA static List_t xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready list when the scheduler is resumed. */\r
-\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
-\r
- PRIVILEGED_DATA static List_t xTasksWaitingTermination; /*< Tasks that have been deleted - but their memory not yet freed. */\r
- PRIVILEGED_DATA static volatile UBaseType_t uxDeletedTasksWaitingCleanUp = ( UBaseType_t ) 0U;\r
-\r
-#endif\r
-\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
-\r
- PRIVILEGED_DATA static List_t xSuspendedTaskList; /*< Tasks that are currently suspended. */\r
-\r
-#endif\r
-\r
-/* Other file private variables. --------------------------------*/\r
-PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks = ( UBaseType_t ) 0U;\r
-PRIVILEGED_DATA static volatile TickType_t xTickCount = ( TickType_t ) 0U;\r
-PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority = tskIDLE_PRIORITY;\r
-PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning = pdFALSE;\r
-PRIVILEGED_DATA static volatile UBaseType_t uxPendedTicks = ( UBaseType_t ) 0U;\r
-PRIVILEGED_DATA static volatile BaseType_t xYieldPending = pdFALSE;\r
-PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows = ( BaseType_t ) 0;\r
-PRIVILEGED_DATA static UBaseType_t uxTaskNumber = ( UBaseType_t ) 0U;\r
-PRIVILEGED_DATA static volatile TickType_t xNextTaskUnblockTime = ( TickType_t ) 0U; /* Initialised to portMAX_DELAY before the scheduler starts. */\r
-PRIVILEGED_DATA static TaskHandle_t xIdleTaskHandle = NULL; /*< Holds the handle of the idle task. The idle task is created automatically when the scheduler is started. */\r
-\r
-/* Context switches are held pending while the scheduler is suspended. Also,\r
-interrupts must not manipulate the xStateListItem of a TCB, or any of the\r
-lists the xStateListItem can be referenced from, if the scheduler is suspended.\r
-If an interrupt needs to unblock a task while the scheduler is suspended then it\r
-moves the task's event list item into the xPendingReadyList, ready for the\r
-kernel to move the task from the pending ready list into the real ready list\r
-when the scheduler is unsuspended. The pending ready list itself can only be\r
-accessed from a critical section. */\r
-PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended = ( UBaseType_t ) pdFALSE;\r
-\r
-#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
-\r
- PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
- PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL; /*< Holds the total amount of execution time as defined by the run time counter clock. */\r
-\r
-#endif\r
-\r
-/*lint +e956 */\r
-\r
-/* Debugging and trace facilities private variables and macros. ------------*/\r
-\r
/*\r
* The value used to fill the stack of a task when the task is created. This\r
* is used purely for checking the high water mark for tasks.\r
*/\r
#define tskSTACK_FILL_BYTE ( 0xa5U )\r
\r
+/* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using\r
+dynamically allocated RAM, in which case when any task is deleted it is known\r
+that both the task's stack and TCB need to be freed. Sometimes the\r
+FreeRTOSConfig.h settings only allow a task to be created using statically\r
+allocated RAM, in which case when any task is deleted it is known that neither\r
+the task's stack or TCB should be freed. Sometimes the FreeRTOSConfig.h\r
+settings allow a task to be created using either statically or dynamically\r
+allocated RAM, in which case a member of the TCB is used to record whether the\r
+stack and/or TCB were allocated statically or dynamically, so when a task is\r
+deleted the RAM that was allocated dynamically is freed again and no attempt is\r
+made to free the RAM that was allocated statically.\r
+tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is only true if it is possible for a\r
+task to be created using either statically or dynamically allocated RAM. Note\r
+that if portUSING_MPU_WRAPPERS is 1 then a protected task can be created with\r
+a statically allocated stack and a dynamically allocated TCB.\r
+!!!NOTE!!! If the definition of tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is\r
+changed then the definition of StaticTask_t must also be updated. */\r
+#define tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )\r
+#define tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 0 )\r
+#define tskSTATICALLY_ALLOCATED_STACK_ONLY ( ( uint8_t ) 1 )\r
+#define tskSTATICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 2 )\r
+\r
+/* If any of the following are set then task stacks are filled with a known\r
+value so the high water mark can be determined. If none of the following are\r
+set then don't fill the stack so there is no unnecessary dependency on memset. */\r
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
+ #define tskSET_NEW_STACKS_TO_KNOWN_VALUE 1\r
+#else\r
+ #define tskSET_NEW_STACKS_TO_KNOWN_VALUE 0\r
+#endif\r
+\r
/*\r
* Macros used by vListTask to indicate which state a task is in.\r
*/\r
#define tskDELETED_CHAR ( 'D' )\r
#define tskSUSPENDED_CHAR ( 'S' )\r
\r
-/*-----------------------------------------------------------*/\r
+/*\r
+ * Some kernel aware debuggers require the data the debugger needs access to be\r
+ * global, rather than file scope.\r
+ */\r
+#ifdef portREMOVE_STATIC_QUALIFIER\r
+ #define static\r
+#endif\r
+\r
+/* The name allocated to the Idle task. This can be overridden by defining\r
+configIDLE_TASK_NAME in FreeRTOSConfig.h. */\r
+#ifndef configIDLE_TASK_NAME\r
+ #define configIDLE_TASK_NAME "IDLE"\r
+#endif\r
\r
#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )\r
\r
\r
#define taskSELECT_HIGHEST_PRIORITY_TASK() \\r
{ \\r
+ UBaseType_t uxTopPriority = uxTopReadyPriority; \\r
+ \\r
/* Find the highest priority queue that contains ready tasks. */ \\r
- while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopReadyPriority ] ) ) ) \\r
+ while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopPriority ] ) ) ) \\r
{ \\r
- configASSERT( uxTopReadyPriority ); \\r
- --uxTopReadyPriority; \\r
+ configASSERT( uxTopPriority ); \\r
+ --uxTopPriority; \\r
} \\r
\\r
/* listGET_OWNER_OF_NEXT_ENTRY indexes through the list, so the tasks of \\r
the same priority get an equal share of the processor time. */ \\r
- listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopReadyPriority ] ) ); \\r
+ listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) ); \\r
+ uxTopReadyPriority = uxTopPriority; \\r
} /* taskSELECT_HIGHEST_PRIORITY_TASK */\r
\r
/*-----------------------------------------------------------*/\r
#define taskEVENT_LIST_ITEM_VALUE_IN_USE 0x80000000UL\r
#endif\r
\r
-/* Callback function prototypes. --------------------------*/\r
-#if( configCHECK_FOR_STACK_OVERFLOW > 0 )\r
- extern void vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName );\r
-#endif\r
-\r
-#if( configUSE_TICK_HOOK > 0 )\r
- extern void vApplicationTickHook( void );\r
-#endif\r
-\r
-#if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
- extern void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint16_t *pusIdleTaskStackSize );\r
-#endif\r
-\r
-/* File private functions. --------------------------------*/\r
-\r
/*\r
- * Utility to ready a TCB for a given task. Mainly just copies the parameters\r
- * into the TCB structure.\r
- */\r
-static void prvInitialiseTCBVariables( TCB_t * const pxTCB, const char * const pcName, UBaseType_t uxPriority, const MemoryRegion_t * const xRegions, const uint16_t usStackDepth ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
-\r
-/**\r
- * Utility task that simply returns pdTRUE if the task referenced by xTask is\r
- * currently in the Suspended state, or pdFALSE if the task referenced by xTask\r
- * is in any other state.\r
+ * Task control block. A task control block (TCB) is allocated for each task,\r
+ * and stores task state information, including a pointer to the task's context\r
+ * (the task's run time environment, including register values)\r
*/\r
-#if ( INCLUDE_vTaskSuspend == 1 )\r
- static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;\r
-#endif /* INCLUDE_vTaskSuspend */\r
+typedef struct tskTaskControlBlock\r
+{\r
+ volatile StackType_t *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */\r
\r
-/*\r
- * Utility to ready all the lists used by the scheduler. This is called\r
- * automatically upon the creation of the first task.\r
- */\r
-static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;\r
+ #if ( portUSING_MPU_WRAPPERS == 1 )\r
+ xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE TCB STRUCT. */\r
+ #endif\r
\r
-/*\r
- * The idle task, which as all tasks is implemented as a never ending loop.\r
- * The idle task is automatically created and added to the ready lists upon\r
- * creation of the first user task.\r
- *\r
- * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific\r
- * language extensions. The equivalent prototype for this function is:\r
- *\r
- * void prvIdleTask( void *pvParameters );\r
- *\r
- */\r
-static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );\r
+ ListItem_t xStateListItem; /*< The list that the state list item of a task is reference from denotes the state of that task (Ready, Blocked, Suspended ). */\r
+ ListItem_t xEventListItem; /*< Used to reference a task from an event list. */\r
+ UBaseType_t uxPriority; /*< The priority of the task. 0 is the lowest priority. */\r
+ StackType_t *pxStack; /*< Points to the start of the stack. */\r
+ char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
\r
-/*\r
- * Utility to free all memory allocated by the scheduler to hold a TCB,\r
- * including the stack pointed to by the TCB.\r
- *\r
- * This does not free memory allocated by the task itself (i.e. memory\r
- * allocated by calls to pvPortMalloc from within the tasks application code).\r
- */\r
-#if ( INCLUDE_vTaskDelete == 1 )\r
+ #if ( ( portSTACK_GROWTH > 0 ) || ( configRECORD_STACK_HIGH_ADDRESS == 1 ) )\r
+ StackType_t *pxEndOfStack; /*< Points to the highest valid address for the stack. */\r
+ #endif\r
\r
- static void prvDeleteTCB( TCB_t *pxTCB ) PRIVILEGED_FUNCTION;\r
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+ UBaseType_t uxCriticalNesting; /*< Holds the critical section nesting depth for ports that do not maintain their own count in the port layer. */\r
+ #endif\r
\r
-#endif\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ UBaseType_t uxTCBNumber; /*< Stores a number that increments each time a TCB is created. It allows debuggers to determine when a task has been deleted and then recreated. */\r
+ UBaseType_t uxTaskNumber; /*< Stores a number specifically for use by third party trace code. */\r
+ #endif\r
\r
-/*\r
- * Used only by the idle task. This checks to see if anything has been placed\r
- * in the list of tasks waiting to be deleted. If so the task is cleaned up\r
- * and its TCB deleted.\r
- */\r
-static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ UBaseType_t uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */\r
+ UBaseType_t uxMutexesHeld;\r
+ #endif\r
\r
-/*\r
- * The currently executing task is entering the Blocked state. Add the task to\r
- * either the current or the overflow delayed task list.\r
- */\r
-static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely ) PRIVILEGED_FUNCTION;\r
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+ TaskHookFunction_t pxTaskTag;\r
+ #endif\r
\r
-/*\r
- * Allocates memory from the heap for a TCB and associated stack. Checks the\r
- * allocation was successful.\r
- */\r
-static TCB_t *prvAllocateTCBAndStack( const uint16_t usStackDepth, StackType_t * const puxStackBuffer, TCB_t * const pucTCBBuffer ) PRIVILEGED_FUNCTION;\r
+ #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )\r
+ void *pvThreadLocalStoragePointers[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ];\r
+ #endif\r
\r
-/*\r
+ #if( configGENERATE_RUN_TIME_STATS == 1 )\r
+ uint32_t ulRunTimeCounter; /*< Stores the amount of time the task has spent in the Running state. */\r
+ #endif\r
+\r
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )\r
+ /* Allocate a Newlib reent structure that is specific to this task.\r
+ Note Newlib support has been included by popular demand, but is not\r
+ used by the FreeRTOS maintainers themselves. FreeRTOS is not\r
+ responsible for resulting newlib operation. User must be familiar with\r
+ newlib and must provide system-wide implementations of the necessary\r
+ stubs. Be warned that (at the time of writing) the current newlib design\r
+ implements a system-wide malloc() that must be provided with locks. */\r
+ struct _reent xNewLib_reent;\r
+ #endif\r
+\r
+ #if( configUSE_TASK_NOTIFICATIONS == 1 )\r
+ volatile uint32_t ulNotifiedValue;\r
+ volatile uint8_t ucNotifyState;\r
+ #endif\r
+\r
+ /* See the comments above the definition of\r
+ tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE. */\r
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 Macro has been consolidated for readability reasons. */\r
+ uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the task is a statically allocated to ensure no attempt is made to free the memory. */\r
+ #endif\r
+\r
+ #if( INCLUDE_xTaskAbortDelay == 1 )\r
+ uint8_t ucDelayAborted;\r
+ #endif\r
+\r
+} tskTCB;\r
+\r
+/* The old tskTCB name is maintained above then typedefed to the new TCB_t name\r
+below to enable the use of older kernel aware debuggers. */\r
+typedef tskTCB TCB_t;\r
+\r
+/*lint -save -e956 A manual analysis and inspection has been used to determine\r
+which static variables must be declared volatile. */\r
+\r
+PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;\r
+\r
+/* Lists for ready and blocked tasks. --------------------*/\r
+PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */\r
+PRIVILEGED_DATA static List_t xDelayedTaskList1; /*< Delayed tasks. */\r
+PRIVILEGED_DATA static List_t xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */\r
+PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList; /*< Points to the delayed task list currently being used. */\r
+PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */\r
+PRIVILEGED_DATA static List_t xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready list when the scheduler is resumed. */\r
+\r
+#if( INCLUDE_vTaskDelete == 1 )\r
+\r
+ PRIVILEGED_DATA static List_t xTasksWaitingTermination; /*< Tasks that have been deleted - but their memory not yet freed. */\r
+ PRIVILEGED_DATA static volatile UBaseType_t uxDeletedTasksWaitingCleanUp = ( UBaseType_t ) 0U;\r
+\r
+#endif\r
+\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ PRIVILEGED_DATA static List_t xSuspendedTaskList; /*< Tasks that are currently suspended. */\r
+\r
+#endif\r
+\r
+/* Other file private variables. --------------------------------*/\r
+PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks = ( UBaseType_t ) 0U;\r
+PRIVILEGED_DATA static volatile TickType_t xTickCount = ( TickType_t ) configINITIAL_TICK_COUNT;\r
+PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority = tskIDLE_PRIORITY;\r
+PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning = pdFALSE;\r
+PRIVILEGED_DATA static volatile UBaseType_t uxPendedTicks = ( UBaseType_t ) 0U;\r
+PRIVILEGED_DATA static volatile BaseType_t xYieldPending = pdFALSE;\r
+PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows = ( BaseType_t ) 0;\r
+PRIVILEGED_DATA static UBaseType_t uxTaskNumber = ( UBaseType_t ) 0U;\r
+PRIVILEGED_DATA static volatile TickType_t xNextTaskUnblockTime = ( TickType_t ) 0U; /* Initialised to portMAX_DELAY before the scheduler starts. */\r
+PRIVILEGED_DATA static TaskHandle_t xIdleTaskHandle = NULL; /*< Holds the handle of the idle task. The idle task is created automatically when the scheduler is started. */\r
+\r
+/* Context switches are held pending while the scheduler is suspended. Also,\r
+interrupts must not manipulate the xStateListItem of a TCB, or any of the\r
+lists the xStateListItem can be referenced from, if the scheduler is suspended.\r
+If an interrupt needs to unblock a task while the scheduler is suspended then it\r
+moves the task's event list item into the xPendingReadyList, ready for the\r
+kernel to move the task from the pending ready list into the real ready list\r
+when the scheduler is unsuspended. The pending ready list itself can only be\r
+accessed from a critical section. */\r
+PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended = ( UBaseType_t ) pdFALSE;\r
+\r
+#if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+\r
+ PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */\r
+ PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL; /*< Holds the total amount of execution time as defined by the run time counter clock. */\r
+\r
+#endif\r
+\r
+/*lint -restore */\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+/* Callback function prototypes. --------------------------*/\r
+#if( configCHECK_FOR_STACK_OVERFLOW > 0 )\r
+\r
+ extern void vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName );\r
+\r
+#endif\r
+\r
+#if( configUSE_TICK_HOOK > 0 )\r
+\r
+ extern void vApplicationTickHook( void );\r
+\r
+#endif\r
+\r
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
+\r
+ extern void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize );\r
+\r
+#endif\r
+\r
+/* File private functions. --------------------------------*/\r
+\r
+/**\r
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is\r
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask\r
+ * is in any other state.\r
+ */\r
+#if ( INCLUDE_vTaskSuspend == 1 )\r
+\r
+ static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;\r
+\r
+#endif /* INCLUDE_vTaskSuspend */\r
+\r
+/*\r
+ * Utility to ready all the lists used by the scheduler. This is called\r
+ * automatically upon the creation of the first task.\r
+ */\r
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The idle task, which as all tasks is implemented as a never ending loop.\r
+ * The idle task is automatically created and added to the ready lists upon\r
+ * creation of the first user task.\r
+ *\r
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific\r
+ * language extensions. The equivalent prototype for this function is:\r
+ *\r
+ * void prvIdleTask( void *pvParameters );\r
+ *\r
+ */\r
+static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );\r
+\r
+/*\r
+ * Utility to free all memory allocated by the scheduler to hold a TCB,\r
+ * including the stack pointed to by the TCB.\r
+ *\r
+ * This does not free memory allocated by the task itself (i.e. memory\r
+ * allocated by calls to pvPortMalloc from within the tasks application code).\r
+ */\r
+#if ( INCLUDE_vTaskDelete == 1 )\r
+\r
+ static void prvDeleteTCB( TCB_t *pxTCB ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
+/*\r
+ * Used only by the idle task. This checks to see if anything has been placed\r
+ * in the list of tasks waiting to be deleted. If so the task is cleaned up\r
+ * and its TCB deleted.\r
+ */\r
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * The currently executing task is entering the Blocked state. Add the task to\r
+ * either the current or the overflow delayed task list.\r
+ */\r
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
* Fills an TaskStatus_t structure with information on each task that is\r
* referenced from the pxList list (which may be a ready list, a delayed list,\r
* a suspended list, etc.).\r
* Searches pxList for a task with name pcNameToQuery - returning a handle to\r
* the task if it is found, or NULL if the task is not found.\r
*/\r
-#if ( INCLUDE_xTaskGetTaskHandle == 1 )\r
+#if ( INCLUDE_xTaskGetHandle == 1 )\r
\r
static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] ) PRIVILEGED_FUNCTION;\r
\r
static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName ) PRIVILEGED_FUNCTION;\r
\r
#endif\r
+\r
+/*\r
+ * Called after a Task_t structure has been allocated either statically or\r
+ * dynamically to fill in the structure's members.\r
+ */\r
+static void prvInitialiseNewTask( TaskFunction_t pxTaskCode,\r
+ const char * const pcName, /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+ const uint32_t ulStackDepth,\r
+ void * const pvParameters,\r
+ UBaseType_t uxPriority,\r
+ TaskHandle_t * const pxCreatedTask,\r
+ TCB_t *pxNewTCB,\r
+ const MemoryRegion_t * const xRegions ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * Called after a new task has been created and initialised to place the task\r
+ * under the control of the scheduler.\r
+ */\r
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB ) PRIVILEGED_FUNCTION;\r
+\r
+/*\r
+ * freertos_tasks_c_additions_init() should only be called if the user definable\r
+ * macro FREERTOS_TASKS_C_ADDITIONS_INIT() is defined, as that is the only macro\r
+ * called by the function.\r
+ */\r
+#ifdef FREERTOS_TASKS_C_ADDITIONS_INIT\r
+\r
+ static void freertos_tasks_c_additions_init( void ) PRIVILEGED_FUNCTION;\r
+\r
+#endif\r
+\r
/*-----------------------------------------------------------*/\r
\r
-BaseType_t xTaskGenericCreate( TaskFunction_t pxTaskCode, const char * const pcName, const uint16_t usStackDepth, void * const pvParameters, UBaseType_t uxPriority, TaskHandle_t * const pxCreatedTask, StackType_t * const puxStackBuffer, StaticTask_t * const pxTaskBuffer, const MemoryRegion_t * const xRegions ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
-{\r
-BaseType_t xReturn;\r
-TCB_t * pxNewTCB;\r
-StackType_t *pxTopOfStack;\r
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
+\r
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pxTaskCode,\r
+ const char * const pcName, /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+ const uint32_t ulStackDepth,\r
+ void * const pvParameters,\r
+ UBaseType_t uxPriority,\r
+ StackType_t * const puxStackBuffer,\r
+ StaticTask_t * const pxTaskBuffer )\r
+ {\r
+ TCB_t *pxNewTCB;\r
+ TaskHandle_t xReturn;\r
\r
- configASSERT( pxTaskCode );\r
- configASSERT( ( ( uxPriority & ( UBaseType_t ) ( ~portPRIVILEGE_BIT ) ) < ( UBaseType_t ) configMAX_PRIORITIES ) );\r
+ configASSERT( puxStackBuffer != NULL );\r
+ configASSERT( pxTaskBuffer != NULL );\r
+\r
+ #if( configASSERT_DEFINED == 1 )\r
+ {\r
+ /* Sanity check that the size of the structure used to declare a\r
+ variable of type StaticTask_t equals the size of the real task\r
+ structure. */\r
+ volatile size_t xSize = sizeof( StaticTask_t );\r
+ configASSERT( xSize == sizeof( TCB_t ) );\r
+ }\r
+ #endif /* configASSERT_DEFINED */\r
\r
- /* Allocate the memory required by the TCB and stack for the new task,\r
- checking that the allocation was successful. */\r
- pxNewTCB = prvAllocateTCBAndStack( usStackDepth, puxStackBuffer, ( TCB_t* ) pxTaskBuffer ); /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */\r
\r
- if( pxNewTCB != NULL )\r
+ if( ( pxTaskBuffer != NULL ) && ( puxStackBuffer != NULL ) )\r
+ {\r
+ /* The memory used for the task's TCB and stack are passed into this\r
+ function - use them. */\r
+ pxNewTCB = ( TCB_t * ) pxTaskBuffer; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */\r
+ pxNewTCB->pxStack = ( StackType_t * ) puxStackBuffer;\r
+\r
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 Macro has been consolidated for readability reasons. */\r
+ {\r
+ /* Tasks can be created statically or dynamically, so note this\r
+ task was created statically in case the task is later deleted. */\r
+ pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;\r
+ }\r
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
+\r
+ prvInitialiseNewTask( pxTaskCode, pcName, ulStackDepth, pvParameters, uxPriority, &xReturn, pxNewTCB, NULL );\r
+ prvAddNewTaskToReadyList( pxNewTCB );\r
+ }\r
+ else\r
+ {\r
+ xReturn = NULL;\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* SUPPORT_STATIC_ALLOCATION */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )\r
+\r
+ BaseType_t xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )\r
{\r
- #if( portUSING_MPU_WRAPPERS == 1 )\r
- /* Should the task be created in privileged mode? */\r
- BaseType_t xRunPrivileged;\r
- if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )\r
+ TCB_t *pxNewTCB;\r
+ BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
+\r
+ configASSERT( pxTaskDefinition->puxStackBuffer != NULL );\r
+ configASSERT( pxTaskDefinition->pxTaskBuffer != NULL );\r
+\r
+ if( ( pxTaskDefinition->puxStackBuffer != NULL ) && ( pxTaskDefinition->pxTaskBuffer != NULL ) )\r
+ {\r
+ /* Allocate space for the TCB. Where the memory comes from depends\r
+ on the implementation of the port malloc function and whether or\r
+ not static allocation is being used. */\r
+ pxNewTCB = ( TCB_t * ) pxTaskDefinition->pxTaskBuffer;\r
+\r
+ /* Store the stack location in the TCB. */\r
+ pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;\r
+\r
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )\r
{\r
- xRunPrivileged = pdTRUE;\r
+ /* Tasks can be created statically or dynamically, so note this\r
+ task was created statically in case the task is later deleted. */\r
+ pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;\r
}\r
- else\r
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
+\r
+ prvInitialiseNewTask( pxTaskDefinition->pvTaskCode,\r
+ pxTaskDefinition->pcName,\r
+ ( uint32_t ) pxTaskDefinition->usStackDepth,\r
+ pxTaskDefinition->pvParameters,\r
+ pxTaskDefinition->uxPriority,\r
+ pxCreatedTask, pxNewTCB,\r
+ pxTaskDefinition->xRegions );\r
+\r
+ prvAddNewTaskToReadyList( pxNewTCB );\r
+ xReturn = pdPASS;\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* ( portUSING_MPU_WRAPPERS == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( ( portUSING_MPU_WRAPPERS == 1 ) && ( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) )\r
+\r
+ BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )\r
+ {\r
+ TCB_t *pxNewTCB;\r
+ BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
+\r
+ configASSERT( pxTaskDefinition->puxStackBuffer );\r
+\r
+ if( pxTaskDefinition->puxStackBuffer != NULL )\r
+ {\r
+ /* Allocate space for the TCB. Where the memory comes from depends\r
+ on the implementation of the port malloc function and whether or\r
+ not static allocation is being used. */\r
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );\r
+\r
+ if( pxNewTCB != NULL )\r
{\r
- xRunPrivileged = pdFALSE;\r
+ /* Store the stack location in the TCB. */\r
+ pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;\r
+\r
+ /* Tasks can be created statically or dynamically, so note\r
+ this task had a statically allocated stack in case it is\r
+ later deleted. The TCB was allocated dynamically. */\r
+ pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_ONLY;\r
+\r
+ prvInitialiseNewTask( pxTaskDefinition->pvTaskCode,\r
+ pxTaskDefinition->pcName,\r
+ ( uint32_t ) pxTaskDefinition->usStackDepth,\r
+ pxTaskDefinition->pvParameters,\r
+ pxTaskDefinition->uxPriority,\r
+ pxCreatedTask, pxNewTCB,\r
+ pxTaskDefinition->xRegions );\r
+\r
+ prvAddNewTaskToReadyList( pxNewTCB );\r
+ xReturn = pdPASS;\r
}\r
- uxPriority &= ~portPRIVILEGE_BIT;\r
- #endif /* portUSING_MPU_WRAPPERS == 1 */\r
+ }\r
\r
- /* Calculate the top of stack address. This depends on whether the\r
- stack grows from high memory to low (as per the 80x86) or vice versa.\r
- portSTACK_GROWTH is used to make the result positive or negative as\r
- required by the port. */\r
- #if( portSTACK_GROWTH < 0 )\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* portUSING_MPU_WRAPPERS */\r
+/*-----------------------------------------------------------*/\r
+\r
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )\r
+\r
+ BaseType_t xTaskCreate( TaskFunction_t pxTaskCode,\r
+ const char * const pcName, /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+ const configSTACK_DEPTH_TYPE usStackDepth,\r
+ void * const pvParameters,\r
+ UBaseType_t uxPriority,\r
+ TaskHandle_t * const pxCreatedTask )\r
+ {\r
+ TCB_t *pxNewTCB;\r
+ BaseType_t xReturn;\r
+\r
+ /* If the stack grows down then allocate the stack then the TCB so the stack\r
+ does not grow into the TCB. Likewise if the stack grows up then allocate\r
+ the TCB then the stack. */\r
+ #if( portSTACK_GROWTH > 0 )\r
{\r
- pxTopOfStack = pxNewTCB->pxStack + ( usStackDepth - ( uint16_t ) 1 );\r
- pxTopOfStack = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) ); /*lint !e923 MISRA exception. Avoiding casts between pointers and integers is not practical. Size differences accounted for using portPOINTER_SIZE_TYPE type. */\r
+ /* Allocate space for the TCB. Where the memory comes from depends on\r
+ the implementation of the port malloc function and whether or not static\r
+ allocation is being used. */\r
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );\r
\r
- /* Check the alignment of the calculated top of stack is correct. */\r
- configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+ if( pxNewTCB != NULL )\r
+ {\r
+ /* Allocate space for the stack used by the task being created.\r
+ The base of the stack memory stored in the TCB so the task can\r
+ be deleted later if required. */\r
+ pxNewTCB->pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+\r
+ if( pxNewTCB->pxStack == NULL )\r
+ {\r
+ /* Could not allocate the stack. Delete the allocated TCB. */\r
+ vPortFree( pxNewTCB );\r
+ pxNewTCB = NULL;\r
+ }\r
+ }\r
}\r
#else /* portSTACK_GROWTH */\r
{\r
- pxTopOfStack = pxNewTCB->pxStack;\r
+ StackType_t *pxStack;\r
\r
- /* Check the alignment of the stack buffer is correct. */\r
- configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxNewTCB->pxStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+ /* Allocate space for the stack used by the task being created. */\r
+ pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+\r
+ if( pxStack != NULL )\r
+ {\r
+ /* Allocate space for the TCB. */\r
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) ); /*lint !e961 MISRA exception as the casts are only redundant for some paths. */\r
\r
- /* If we want to use stack checking on architectures that use\r
- a positive stack growth direction then we also need to store the\r
- other extreme of the stack space. */\r
- pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( usStackDepth - ( uint16_t ) 1 );\r
+ if( pxNewTCB != NULL )\r
+ {\r
+ /* Store the stack location in the TCB. */\r
+ pxNewTCB->pxStack = pxStack;\r
+ }\r
+ else\r
+ {\r
+ /* The stack cannot be used as the TCB was not created. Free\r
+ it again. */\r
+ vPortFree( pxStack );\r
+ }\r
+ }\r
+ else\r
+ {\r
+ pxNewTCB = NULL;\r
+ }\r
}\r
#endif /* portSTACK_GROWTH */\r
\r
- /* Setup the newly allocated TCB with the initial state of the task. */\r
- prvInitialiseTCBVariables( pxNewTCB, pcName, uxPriority, xRegions, usStackDepth );\r
+ if( pxNewTCB != NULL )\r
+ {\r
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 Macro has been consolidated for readability reasons. */\r
+ {\r
+ /* Tasks can be created statically or dynamically, so note this\r
+ task was created dynamically in case it is later deleted. */\r
+ pxNewTCB->ucStaticallyAllocated = tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB;\r
+ }\r
+ #endif /* configSUPPORT_STATIC_ALLOCATION */\r
+\r
+ prvInitialiseNewTask( pxTaskCode, pcName, ( uint32_t ) usStackDepth, pvParameters, uxPriority, pxCreatedTask, pxNewTCB, NULL );\r
+ prvAddNewTaskToReadyList( pxNewTCB );\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
+ }\r
+\r
+ return xReturn;\r
+ }\r
+\r
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
+/*-----------------------------------------------------------*/\r
\r
- /* Initialize the TCB stack to look as if the task was already running,\r
- but had been interrupted by the scheduler. The return address is set\r
- to the start of the task function. Once the stack has been initialised\r
- the top of stack variable is updated. */\r
- #if( portUSING_MPU_WRAPPERS == 1 )\r
+static void prvInitialiseNewTask( TaskFunction_t pxTaskCode,\r
+ const char * const pcName, /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+ const uint32_t ulStackDepth,\r
+ void * const pvParameters,\r
+ UBaseType_t uxPriority,\r
+ TaskHandle_t * const pxCreatedTask,\r
+ TCB_t *pxNewTCB,\r
+ const MemoryRegion_t * const xRegions )\r
+{\r
+StackType_t *pxTopOfStack;\r
+UBaseType_t x;\r
+\r
+ #if( portUSING_MPU_WRAPPERS == 1 )\r
+ /* Should the task be created in privileged mode? */\r
+ BaseType_t xRunPrivileged;\r
+ if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )\r
+ {\r
+ xRunPrivileged = pdTRUE;\r
+ }\r
+ else\r
{\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ xRunPrivileged = pdFALSE;\r
}\r
- #else /* portUSING_MPU_WRAPPERS */\r
+ uxPriority &= ~portPRIVILEGE_BIT;\r
+ #endif /* portUSING_MPU_WRAPPERS == 1 */\r
+\r
+ /* Avoid dependency on memset() if it is not required. */\r
+ #if( tskSET_NEW_STACKS_TO_KNOWN_VALUE == 1 )\r
+ {\r
+ /* Fill the stack with a known value to assist debugging. */\r
+ ( void ) memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) ulStackDepth * sizeof( StackType_t ) );\r
+ }\r
+ #endif /* tskSET_NEW_STACKS_TO_KNOWN_VALUE */\r
+\r
+ /* Calculate the top of stack address. This depends on whether the stack\r
+ grows from high memory to low (as per the 80x86) or vice versa.\r
+ portSTACK_GROWTH is used to make the result positive or negative as required\r
+ by the port. */\r
+ #if( portSTACK_GROWTH < 0 )\r
+ {\r
+ pxTopOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );\r
+ pxTopOfStack = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) ); /*lint !e923 MISRA exception. Avoiding casts between pointers and integers is not practical. Size differences accounted for using portPOINTER_SIZE_TYPE type. */\r
+\r
+ /* Check the alignment of the calculated top of stack is correct. */\r
+ configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
+\r
+ #if( configRECORD_STACK_HIGH_ADDRESS == 1 )\r
{\r
- pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
+ /* Also record the stack's high address, which may assist\r
+ debugging. */\r
+ pxNewTCB->pxEndOfStack = pxTopOfStack;\r
}\r
- #endif /* portUSING_MPU_WRAPPERS */\r
+ #endif /* configRECORD_STACK_HIGH_ADDRESS */\r
+ }\r
+ #else /* portSTACK_GROWTH */\r
+ {\r
+ pxTopOfStack = pxNewTCB->pxStack;\r
+\r
+ /* Check the alignment of the stack buffer is correct. */\r
+ configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxNewTCB->pxStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );\r
\r
- if( ( void * ) pxCreatedTask != NULL )\r
+ /* The other extreme of the stack space is required if stack checking is\r
+ performed. */\r
+ pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );\r
+ }\r
+ #endif /* portSTACK_GROWTH */\r
+\r
+ /* Store the task name in the TCB. */\r
+ for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )\r
+ {\r
+ pxNewTCB->pcTaskName[ x ] = pcName[ x ];\r
+\r
+ /* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than\r
+ configMAX_TASK_NAME_LEN characters just in case the memory after the\r
+ string is not accessible (extremely unlikely). */\r
+ if( pcName[ x ] == 0x00 )\r
{\r
- /* Pass the TCB out - in an anonymous way. The calling function/\r
- task can use this as a handle to delete the task later if\r
- required.*/\r
- *pxCreatedTask = ( TaskHandle_t ) pxNewTCB;\r
+ break;\r
}\r
else\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
+ }\r
\r
- /* Ensure interrupts don't access the task lists while they are being\r
- updated. */\r
- taskENTER_CRITICAL();\r
+ /* Ensure the name string is terminated in the case that the string length\r
+ was greater or equal to configMAX_TASK_NAME_LEN. */\r
+ pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';\r
+\r
+ /* This is used as an array index so must ensure it's not too large. First\r
+ remove the privilege bit if one is present. */\r
+ if( uxPriority >= ( UBaseType_t ) configMAX_PRIORITIES )\r
+ {\r
+ uxPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+\r
+ pxNewTCB->uxPriority = uxPriority;\r
+ #if ( configUSE_MUTEXES == 1 )\r
+ {\r
+ pxNewTCB->uxBasePriority = uxPriority;\r
+ pxNewTCB->uxMutexesHeld = 0;\r
+ }\r
+ #endif /* configUSE_MUTEXES */\r
+\r
+ vListInitialiseItem( &( pxNewTCB->xStateListItem ) );\r
+ vListInitialiseItem( &( pxNewTCB->xEventListItem ) );\r
+\r
+ /* Set the pxNewTCB as a link back from the ListItem_t. This is so we can get\r
+ back to the containing TCB from a generic item in a list. */\r
+ listSET_LIST_ITEM_OWNER( &( pxNewTCB->xStateListItem ), pxNewTCB );\r
+\r
+ /* Event lists are always in priority order. */\r
+ listSET_LIST_ITEM_VALUE( &( pxNewTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+ listSET_LIST_ITEM_OWNER( &( pxNewTCB->xEventListItem ), pxNewTCB );\r
+\r
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
+ {\r
+ pxNewTCB->uxCriticalNesting = ( UBaseType_t ) 0U;\r
+ }\r
+ #endif /* portCRITICAL_NESTING_IN_TCB */\r
+\r
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
+ {\r
+ pxNewTCB->pxTaskTag = NULL;\r
+ }\r
+ #endif /* configUSE_APPLICATION_TASK_TAG */\r
+\r
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
+ {\r
+ pxNewTCB->ulRunTimeCounter = 0UL;\r
+ }\r
+ #endif /* configGENERATE_RUN_TIME_STATS */\r
+\r
+ #if ( portUSING_MPU_WRAPPERS == 1 )\r
+ {\r
+ vPortStoreTaskMPUSettings( &( pxNewTCB->xMPUSettings ), xRegions, pxNewTCB->pxStack, ulStackDepth );\r
+ }\r
+ #else\r
+ {\r
+ /* Avoid compiler warning about unreferenced parameter. */\r
+ ( void ) xRegions;\r
+ }\r
+ #endif\r
+\r
+ #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )\r
+ {\r
+ for( x = 0; x < ( UBaseType_t ) configNUM_THREAD_LOCAL_STORAGE_POINTERS; x++ )\r
{\r
- uxCurrentNumberOfTasks++;\r
- if( pxCurrentTCB == NULL )\r
- {\r
- /* There are no other tasks, or all the other tasks are in\r
- the suspended state - make this the current task. */\r
- pxCurrentTCB = pxNewTCB;\r
+ pxNewTCB->pvThreadLocalStoragePointers[ x ] = NULL;\r
+ }\r
+ }\r
+ #endif\r
\r
- if( uxCurrentNumberOfTasks == ( UBaseType_t ) 1 )\r
- {\r
- /* This is the first task to be created so do the preliminary\r
- initialisation required. We will not recover if this call\r
- fails, but we will report the failure. */\r
- prvInitialiseTaskLists();\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
+ #if ( configUSE_TASK_NOTIFICATIONS == 1 )\r
+ {\r
+ pxNewTCB->ulNotifiedValue = 0;\r
+ pxNewTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;\r
+ }\r
+ #endif\r
+\r
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )\r
+ {\r
+ /* Initialise this task's Newlib reent structure. */\r
+ _REENT_INIT_PTR( ( &( pxNewTCB->xNewLib_reent ) ) );\r
+ }\r
+ #endif\r
+\r
+ #if( INCLUDE_xTaskAbortDelay == 1 )\r
+ {\r
+ pxNewTCB->ucDelayAborted = pdFALSE;\r
+ }\r
+ #endif\r
+\r
+ /* Initialize the TCB stack to look as if the task was already running,\r
+ but had been interrupted by the scheduler. The return address is set\r
+ to the start of the task function. Once the stack has been initialised\r
+ the top of stack variable is updated. */\r
+ #if( portUSING_MPU_WRAPPERS == 1 )\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );\r
+ }\r
+ #else /* portUSING_MPU_WRAPPERS */\r
+ {\r
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );\r
+ }\r
+ #endif /* portUSING_MPU_WRAPPERS */\r
+\r
+ if( ( void * ) pxCreatedTask != NULL )\r
+ {\r
+ /* Pass the handle out in an anonymous way. The handle can be used to\r
+ change the created task's priority, delete the created task, etc.*/\r
+ *pxCreatedTask = ( TaskHandle_t ) pxNewTCB;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB )\r
+{\r
+ /* Ensure interrupts don't access the task lists while the lists are being\r
+ updated. */\r
+ taskENTER_CRITICAL();\r
+ {\r
+ uxCurrentNumberOfTasks++;\r
+ if( pxCurrentTCB == NULL )\r
+ {\r
+ /* There are no other tasks, or all the other tasks are in\r
+ the suspended state - make this the current task. */\r
+ pxCurrentTCB = pxNewTCB;\r
+\r
+ if( uxCurrentNumberOfTasks == ( UBaseType_t ) 1 )\r
+ {\r
+ /* This is the first task to be created so do the preliminary\r
+ initialisation required. We will not recover if this call\r
+ fails, but we will report the failure. */\r
+ prvInitialiseTaskLists();\r
}\r
else\r
{\r
- /* If the scheduler is not already running, make this task the\r
- current task if it is the highest priority task to be created\r
- so far. */\r
- if( xSchedulerRunning == pdFALSE )\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* If the scheduler is not already running, make this task the\r
+ current task if it is the highest priority task to be created\r
+ so far. */\r
+ if( xSchedulerRunning == pdFALSE )\r
+ {\r
+ if( pxCurrentTCB->uxPriority <= pxNewTCB->uxPriority )\r
{\r
- if( pxCurrentTCB->uxPriority <= uxPriority )\r
- {\r
- pxCurrentTCB = pxNewTCB;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
+ pxCurrentTCB = pxNewTCB;\r
}\r
else\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
}\r
-\r
- uxTaskNumber++;\r
-\r
- #if ( configUSE_TRACE_FACILITY == 1 )\r
+ else\r
{\r
- /* Add a counter into the TCB for tracing only. */\r
- pxNewTCB->uxTCBNumber = uxTaskNumber;\r
+ mtCOVERAGE_TEST_MARKER();\r
}\r
- #endif /* configUSE_TRACE_FACILITY */\r
- traceTASK_CREATE( pxNewTCB );\r
+ }\r
\r
- prvAddTaskToReadyList( pxNewTCB );\r
+ uxTaskNumber++;\r
\r
- xReturn = pdPASS;\r
- portSETUP_TCB( pxNewTCB );\r
+ #if ( configUSE_TRACE_FACILITY == 1 )\r
+ {\r
+ /* Add a counter into the TCB for tracing only. */\r
+ pxNewTCB->uxTCBNumber = uxTaskNumber;\r
}\r
- taskEXIT_CRITICAL();\r
- }\r
- else\r
- {\r
- xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;\r
- traceTASK_CREATE_FAILED();\r
+ #endif /* configUSE_TRACE_FACILITY */\r
+ traceTASK_CREATE( pxNewTCB );\r
+\r
+ prvAddTaskToReadyList( pxNewTCB );\r
+\r
+ portSETUP_TCB( pxNewTCB );\r
}\r
+ taskEXIT_CRITICAL();\r
\r
- if( xReturn == pdPASS )\r
+ if( xSchedulerRunning != pdFALSE )\r
{\r
- if( xSchedulerRunning != pdFALSE )\r
+ /* If the created task is of a higher priority than the current task\r
+ then it should run now. */\r
+ if( pxCurrentTCB->uxPriority < pxNewTCB->uxPriority )\r
{\r
- /* If the created task is of a higher priority than the current task\r
- then it should run now. */\r
- if( pxCurrentTCB->uxPriority < uxPriority )\r
- {\r
- taskYIELD_IF_USING_PREEMPTION();\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
+ taskYIELD_IF_USING_PREEMPTION();\r
}\r
else\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
}\r
-\r
- return xReturn;\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
}\r
/*-----------------------------------------------------------*/\r
\r
mtCOVERAGE_TEST_MARKER();\r
}\r
\r
+ /* Increment the uxTaskNumber also so kernel aware debuggers can\r
+ detect that the task lists need re-generating. This is done before\r
+ portPRE_TASK_DELETE_HOOK() as in the Windows port that macro will\r
+ not return. */\r
+ uxTaskNumber++;\r
+\r
if( pxTCB == pxCurrentTCB )\r
{\r
/* A task is deleting itself. This cannot complete within the\r
there is a task that has been deleted and that it should therefore\r
check the xTasksWaitingTermination list. */\r
++uxDeletedTasksWaitingCleanUp;\r
+\r
+ /* The pre-delete hook is primarily for the Windows simulator,\r
+ in which Windows specific clean up operations are performed,\r
+ after which it is not possible to yield away from this task -\r
+ hence xYieldPending is used to latch that a context switch is\r
+ required. */\r
+ portPRE_TASK_DELETE_HOOK( pxTCB, &xYieldPending );\r
}\r
else\r
{\r
--uxCurrentNumberOfTasks;\r
prvDeleteTCB( pxTCB );\r
+\r
+ /* Reset the next expected unblock time in case it referred to\r
+ the task that has just been deleted. */\r
+ prvResetNextTaskUnblockTime();\r
}\r
\r
- /* Increment the uxTaskNumber also so kernel aware debuggers can\r
- detect that the task lists need re-generating. */\r
- uxTaskNumber++;\r
-\r
traceTASK_DELETE( pxTCB );\r
}\r
taskEXIT_CRITICAL();\r
if( pxTCB == pxCurrentTCB )\r
{\r
configASSERT( uxSchedulerSuspended == 0 );\r
-\r
- /* The pre-delete hook is primarily for the Windows simulator,\r
- in which Windows specific clean up operations are performed,\r
- after which it is not possible to yield away from this task -\r
- hence xYieldPending is used to latch that a context switch is\r
- required. */\r
- portPRE_TASK_DELETE_HOOK( pxTCB, &xYieldPending );\r
portYIELD_WITHIN_API();\r
}\r
else\r
{\r
- /* Reset the next expected unblock time in case it referred to\r
- the task that has just been deleted. */\r
- taskENTER_CRITICAL();\r
- {\r
- prvResetNextTaskUnblockTime();\r
- }\r
- taskEXIT_CRITICAL();\r
+ mtCOVERAGE_TEST_MARKER();\r
}\r
}\r
}\r
}\r
\r
/* If the task is in the blocked or suspended list we need do\r
- nothing more than change it's priority variable. However, if\r
+ nothing more than change its priority variable. However, if\r
the task is in a ready list it needs to be removed and placed\r
in the list appropriate to its new priority. */\r
if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )\r
{\r
- /* The task is currently in its ready list - remove before adding\r
- it to it's new ready list. As we are in a critical section we\r
- can do this even if the scheduler is suspended. */\r
+ /* The task is currently in its ready list - remove before\r
+ adding it to it's new ready list. As we are in a critical\r
+ section we can do this even if the scheduler is suspended. */\r
if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
/* It is known that the task is in its ready list so\r
}\r
\r
vListInsertEnd( &xSuspendedTaskList, &( pxTCB->xStateListItem ) );\r
+\r
+ #if( configUSE_TASK_NOTIFICATIONS == 1 )\r
+ {\r
+ if( pxTCB->ucNotifyState == taskWAITING_NOTIFICATION )\r
+ {\r
+ /* The task was blocked to wait for a notification, but is\r
+ now suspended, so no notification was received. */\r
+ pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;\r
+ }\r
+ }\r
+ #endif\r
}\r
taskEXIT_CRITICAL();\r
\r
{\r
/* Is it in the suspended list because it is in the Suspended\r
state, or because is is blocked with no timeout? */\r
- if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) != pdFALSE )\r
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) != pdFALSE ) /*lint !e961. The cast is only redundant when NULL is used. */\r
{\r
xReturn = pdTRUE;\r
}\r
{\r
traceTASK_RESUME( pxTCB );\r
\r
- /* As we are in a critical section we can access the ready\r
- lists even if the scheduler is suspended. */\r
+ /* The ready list can be accessed even if the scheduler is\r
+ suspended because this is inside a critical section. */\r
( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
prvAddTaskToReadyList( pxTCB );\r
\r
- /* We may have just resumed a higher priority task. */\r
+ /* A higher priority task may have just been resumed. */\r
if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
{\r
/* This yield may not cause the task just resumed to run,\r
mtCOVERAGE_TEST_MARKER();\r
}\r
\r
- ( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
prvAddTaskToReadyList( pxTCB );\r
}\r
else\r
void vTaskStartScheduler( void )\r
{\r
BaseType_t xReturn;\r
-StaticTask_t *pxIdleTaskTCBBuffer = NULL;\r
-StackType_t *pxIdleTaskStackBuffer = NULL;\r
-uint16_t usIdleTaskStackSize = tskIDLE_STACK_SIZE;\r
\r
+ /* Add the idle task at the lowest priority. */\r
#if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
{\r
- vApplicationGetIdleTaskMemory( &pxIdleTaskTCBBuffer, &pxIdleTaskStackBuffer, &usIdleTaskStackSize );\r
+ StaticTask_t *pxIdleTaskTCBBuffer = NULL;\r
+ StackType_t *pxIdleTaskStackBuffer = NULL;\r
+ uint32_t ulIdleTaskStackSize;\r
+\r
+ /* The Idle task is created using user provided RAM - obtain the\r
+ address of the RAM then create the idle task. */\r
+ vApplicationGetIdleTaskMemory( &pxIdleTaskTCBBuffer, &pxIdleTaskStackBuffer, &ulIdleTaskStackSize );\r
+ xIdleTaskHandle = xTaskCreateStatic( prvIdleTask,\r
+ configIDLE_TASK_NAME,\r
+ ulIdleTaskStackSize,\r
+ ( void * ) NULL, /*lint !e961. The cast is not redundant for all compilers. */\r
+ ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),\r
+ pxIdleTaskStackBuffer,\r
+ pxIdleTaskTCBBuffer ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */\r
+\r
+ if( xIdleTaskHandle != NULL )\r
+ {\r
+ xReturn = pdPASS;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+ }\r
+ #else\r
+ {\r
+ /* The Idle task is being created using dynamically allocated RAM. */\r
+ xReturn = xTaskCreate( prvIdleTask,\r
+ configIDLE_TASK_NAME,\r
+ configMINIMAL_STACK_SIZE,\r
+ ( void * ) NULL,\r
+ ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),\r
+ &xIdleTaskHandle ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */\r
}\r
#endif /* configSUPPORT_STATIC_ALLOCATION */\r
\r
- /* Add the idle task at the lowest priority. */\r
- xReturn = xTaskGenericCreate( prvIdleTask, "IDLE", usIdleTaskStackSize, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), &xIdleTaskHandle, pxIdleTaskStackBuffer, pxIdleTaskTCBBuffer, NULL ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */\r
-\r
#if ( configUSE_TIMERS == 1 )\r
{\r
if( xReturn == pdPASS )\r
\r
if( xReturn == pdPASS )\r
{\r
+ /* freertos_tasks_c_additions_init() should only be called if the user\r
+ definable macro FREERTOS_TASKS_C_ADDITIONS_INIT() is defined, as that is\r
+ the only macro called by the function. */\r
+ #ifdef FREERTOS_TASKS_C_ADDITIONS_INIT\r
+ {\r
+ freertos_tasks_c_additions_init();\r
+ }\r
+ #endif\r
+\r
/* Interrupts are turned off here, to ensure a tick does not occur\r
before or during the call to xPortStartScheduler(). The stacks of\r
the created tasks contain a status word with interrupts switched on\r
\r
/* If configGENERATE_RUN_TIME_STATS is defined then the following\r
macro must be defined to configure the timer/counter used to generate\r
- the run time counter time base. */\r
+ the run time counter time base. NOTE: If configGENERATE_RUN_TIME_STATS\r
+ is set to 0 and the following line fails to build then ensure you do not\r
+ have portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() defined in your\r
+ FreeRTOSConfig.h file. */\r
portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();\r
\r
/* Setting up the timer tick is hardware specific and thus in the\r
/* This line will only be reached if the kernel could not be started,\r
because there was not enough FreeRTOS heap to create the idle task\r
or the timer task. */\r
- configASSERT( xReturn );\r
+ configASSERT( xReturn != errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY );\r
}\r
\r
/* Prevent compiler warnings if INCLUDE_xTaskGetIdleTaskHandle is set to 0,\r
they should be processed now. This ensures the tick count does\r
not slip, and that any delayed tasks are resumed at the correct\r
time. */\r
- if( uxPendedTicks > ( UBaseType_t ) 0U )\r
{\r
- while( uxPendedTicks > ( UBaseType_t ) 0U )\r
+ UBaseType_t uxPendedCounts = uxPendedTicks; /* Non-volatile copy. */\r
+\r
+ if( uxPendedCounts > ( UBaseType_t ) 0U )\r
{\r
- if( xTaskIncrementTick() != pdFALSE )\r
- {\r
- xYieldPending = pdTRUE;\r
- }\r
- else\r
+ do\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- --uxPendedTicks;\r
+ if( xTaskIncrementTick() != pdFALSE )\r
+ {\r
+ xYieldPending = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ --uxPendedCounts;\r
+ } while( uxPendedCounts > ( UBaseType_t ) 0U );\r
+\r
+ uxPendedTicks = 0;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
}\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
}\r
\r
if( xYieldPending != pdFALSE )\r
}\r
/*-----------------------------------------------------------*/\r
\r
-#if ( INCLUDE_pcTaskGetTaskName == 1 )\r
-\r
- char *pcTaskGetTaskName( TaskHandle_t xTaskToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
- {\r
- TCB_t *pxTCB;\r
-\r
- /* If null is passed in here then the name of the calling task is being\r
- queried. */\r
- pxTCB = prvGetTCBFromHandle( xTaskToQuery );\r
- configASSERT( pxTCB );\r
- return &( pxTCB->pcTaskName[ 0 ] );\r
- }\r
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+{\r
+TCB_t *pxTCB;\r
\r
-#endif /* INCLUDE_pcTaskGetTaskName */\r
+ /* If null is passed in here then the name of the calling task is being\r
+ queried. */\r
+ pxTCB = prvGetTCBFromHandle( xTaskToQuery );\r
+ configASSERT( pxTCB );\r
+ return &( pxTCB->pcTaskName[ 0 ] );\r
+}\r
/*-----------------------------------------------------------*/\r
\r
-#if ( INCLUDE_xTaskGetTaskHandle == 1 )\r
+#if ( INCLUDE_xTaskGetHandle == 1 )\r
\r
static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] )\r
{\r
return pxReturn;\r
}\r
\r
-#endif /* INCLUDE_xTaskGetTaskHandle */\r
+#endif /* INCLUDE_xTaskGetHandle */\r
/*-----------------------------------------------------------*/\r
\r
-#if ( INCLUDE_xTaskGetTaskHandle == 1 )\r
+#if ( INCLUDE_xTaskGetHandle == 1 )\r
\r
- TaskHandle_t xTaskGetTaskHandle( const char *pcNameToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
+ TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
{\r
UBaseType_t uxQueue = configMAX_PRIORITIES;\r
TCB_t* pxTCB;\r
return ( TaskHandle_t ) pxTCB;\r
}\r
\r
-#endif /* INCLUDE_xTaskGetTaskHandle */\r
+#endif /* INCLUDE_xTaskGetHandle */\r
/*-----------------------------------------------------------*/\r
\r
#if ( configUSE_TRACE_FACILITY == 1 )\r
BaseType_t xTaskAbortDelay( TaskHandle_t xTask )\r
{\r
TCB_t *pxTCB = ( TCB_t * ) xTask;\r
- BaseType_t xReturn = pdFALSE;\r
+ BaseType_t xReturn;\r
\r
configASSERT( pxTCB );\r
\r
it is actually in the Blocked state. */\r
if( eTaskGetState( xTask ) == eBlocked )\r
{\r
+ xReturn = pdPASS;\r
+\r
/* Remove the reference to the task from the blocked list. An\r
interrupt won't touch the xStateListItem because the\r
scheduler is suspended. */\r
}\r
else\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
+ xReturn = pdFAIL;\r
}\r
}\r
- xTaskResumeAll();\r
+ ( void ) xTaskResumeAll();\r
\r
return xReturn;\r
}\r
traceTASK_INCREMENT_TICK( xTickCount );\r
if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )\r
{\r
+ /* Minor optimisation. The tick count cannot change in this\r
+ block. */\r
+ const TickType_t xConstTickCount = xTickCount + ( TickType_t ) 1;\r
+\r
/* Increment the RTOS tick, switching the delayed and overflowed\r
delayed lists if it wraps to 0. */\r
- ++xTickCount;\r
+ xTickCount = xConstTickCount;\r
\r
+ if( xConstTickCount == ( TickType_t ) 0U ) /*lint !e774 'if' does not always evaluate to false as it is looking for an overflow. */\r
{\r
- /* Minor optimisation. The tick count cannot change in this\r
- block. */\r
- const TickType_t xConstTickCount = xTickCount;\r
-\r
- if( xConstTickCount == ( TickType_t ) 0U )\r
- {\r
- taskSWITCH_DELAYED_LISTS();\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
+ taskSWITCH_DELAYED_LISTS();\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
\r
- /* See if this tick has made a timeout expire. Tasks are stored in\r
- the queue in the order of their wake time - meaning once one task\r
- has been found whose block time has not expired there is no need to\r
- look any further down the list. */\r
- if( xConstTickCount >= xNextTaskUnblockTime )\r
+ /* See if this tick has made a timeout expire. Tasks are stored in\r
+ the queue in the order of their wake time - meaning once one task\r
+ has been found whose block time has not expired there is no need to\r
+ look any further down the list. */\r
+ if( xConstTickCount >= xNextTaskUnblockTime )\r
+ {\r
+ for( ;; )\r
{\r
- for( ;; )\r
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )\r
+ {\r
+ /* The delayed list is empty. Set xNextTaskUnblockTime\r
+ to the maximum possible value so it is extremely\r
+ unlikely that the\r
+ if( xTickCount >= xNextTaskUnblockTime ) test will pass\r
+ next time through. */\r
+ xNextTaskUnblockTime = portMAX_DELAY; /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+ break;\r
+ }\r
+ else\r
{\r
- if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )\r
+ /* The delayed list is not empty, get the value of the\r
+ item at the head of the delayed list. This is the time\r
+ at which the task at the head of the delayed list must\r
+ be removed from the Blocked state. */\r
+ pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );\r
+ xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xStateListItem ) );\r
+\r
+ if( xConstTickCount < xItemValue )\r
{\r
- /* The delayed list is empty. Set xNextTaskUnblockTime\r
- to the maximum possible value so it is extremely\r
- unlikely that the\r
- if( xTickCount >= xNextTaskUnblockTime ) test will pass\r
- next time through. */\r
- xNextTaskUnblockTime = portMAX_DELAY;\r
+ /* It is not time to unblock this item yet, but the\r
+ item value is the time at which the task at the head\r
+ of the blocked list must be removed from the Blocked\r
+ state - so record the item value in\r
+ xNextTaskUnblockTime. */\r
+ xNextTaskUnblockTime = xItemValue;\r
break;\r
}\r
else\r
{\r
- /* The delayed list is not empty, get the value of the\r
- item at the head of the delayed list. This is the time\r
- at which the task at the head of the delayed list must\r
- be removed from the Blocked state. */\r
- pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );\r
- xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xStateListItem ) );\r
-\r
- if( xConstTickCount < xItemValue )\r
- {\r
- /* It is not time to unblock this item yet, but the\r
- item value is the time at which the task at the head\r
- of the blocked list must be removed from the Blocked\r
- state - so record the item value in\r
- xNextTaskUnblockTime. */\r
- xNextTaskUnblockTime = xItemValue;\r
- break;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+\r
+ /* It is time to remove the item from the Blocked state. */\r
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
\r
- /* It is time to remove the item from the Blocked state. */\r
- ( void ) uxListRemove( &( pxTCB->xStateListItem ) );\r
+ /* Is the task waiting on an event also? If so remove\r
+ it from the event list. */\r
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )\r
+ {\r
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
\r
- /* Is the task waiting on an event also? If so remove\r
- it from the event list. */\r
- if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )\r
+ /* Place the unblocked task into the appropriate ready\r
+ list. */\r
+ prvAddTaskToReadyList( pxTCB );\r
+\r
+ /* A task being unblocked cannot cause an immediate\r
+ context switch if preemption is turned off. */\r
+ #if ( configUSE_PREEMPTION == 1 )\r
+ {\r
+ /* Preemption is on, but a context switch should\r
+ only be performed if the unblocked task has a\r
+ priority that is equal to or higher than the\r
+ currently executing task. */\r
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
{\r
- ( void ) uxListRemove( &( pxTCB->xEventListItem ) );\r
+ xSwitchRequired = pdTRUE;\r
}\r
else\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
-\r
- /* Place the unblocked task into the appropriate ready\r
- list. */\r
- prvAddTaskToReadyList( pxTCB );\r
-\r
- /* A task being unblocked cannot cause an immediate\r
- context switch if preemption is turned off. */\r
- #if ( configUSE_PREEMPTION == 1 )\r
- {\r
- /* Preemption is on, but a context switch should\r
- only be performed if the unblocked task has a\r
- priority that is equal to or higher than the\r
- currently executing task. */\r
- if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )\r
- {\r
- xSwitchRequired = pdTRUE;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- #endif /* configUSE_PREEMPTION */\r
}\r
+ #endif /* configUSE_PREEMPTION */\r
}\r
}\r
}\r
}\r
/*-----------------------------------------------------------*/\r
\r
-BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue )\r
+void vTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue )\r
{\r
TCB_t *pxUnblockedTCB;\r
-BaseType_t xReturn;\r
\r
/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. It is used by\r
the event flags implementation. */\r
\r
if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )\r
{\r
- /* Return true if the task removed from the event list has\r
- a higher priority than the calling task. This allows\r
- the calling task to know if it should force a context\r
- switch now. */\r
- xReturn = pdTRUE;\r
-\r
- /* Mark that a yield is pending in case the user is not using the\r
- "xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */\r
+ /* The unblocked task has a priority above that of the calling task, so\r
+ a context switch is required. This function is called with the\r
+ scheduler suspended so xYieldPending is set so the context switch\r
+ occurs immediately that the scheduler is resumed (unsuspended). */\r
xYieldPending = pdTRUE;\r
}\r
- else\r
- {\r
- xReturn = pdFALSE;\r
- }\r
-\r
- return xReturn;\r
}\r
/*-----------------------------------------------------------*/\r
\r
{\r
/* Minor optimisation. The tick count cannot change in this block. */\r
const TickType_t xConstTickCount = xTickCount;\r
+ const TickType_t xElapsedTime = xConstTickCount - pxTimeOut->xTimeOnEntering;\r
\r
#if( INCLUDE_xTaskAbortDelay == 1 )\r
if( pxCurrentTCB->ucDelayAborted != pdFALSE )\r
was called. */\r
xReturn = pdTRUE;\r
}\r
- else if( ( ( TickType_t ) ( xConstTickCount - pxTimeOut->xTimeOnEntering ) ) < *pxTicksToWait ) /*lint !e961 Explicit casting is only redundant with some compilers, whereas others require it to prevent integer conversion errors. */\r
+ else if( xElapsedTime < *pxTicksToWait ) /*lint !e961 Explicit casting is only redundant with some compilers, whereas others require it to prevent integer conversion errors. */\r
{\r
/* Not a genuine timeout. Adjust parameters for time remaining. */\r
- *pxTicksToWait -= ( xConstTickCount - pxTimeOut->xTimeOnEntering );\r
+ *pxTicksToWait -= xElapsedTime;\r
vTaskSetTimeOutState( pxTimeOut );\r
xReturn = pdFALSE;\r
}\r
configASSERT( xNextTaskUnblockTime >= xTickCount );\r
xExpectedIdleTime = prvGetExpectedIdleTime();\r
\r
+ /* Define the following macro to set xExpectedIdleTime to 0\r
+ if the application does not want\r
+ portSUPPRESS_TICKS_AND_SLEEP() to be called. */\r
+ configPRE_SUPPRESS_TICKS_AND_SLEEP_PROCESSING( xExpectedIdleTime );\r
+\r
if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )\r
{\r
traceLOW_POWER_IDLE_BEGIN();\r
portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime );\r
- traceLOW_POWER_IDLE_END();\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- ( void ) xTaskResumeAll();\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- #endif /* configUSE_TICKLESS_IDLE */\r
- }\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
-#if( configUSE_TICKLESS_IDLE != 0 )\r
-\r
- eSleepModeStatus eTaskConfirmSleepModeStatus( void )\r
- {\r
- /* The idle task exists in addition to the application tasks. */\r
- const UBaseType_t uxNonApplicationTasks = 1;\r
- eSleepModeStatus eReturn = eStandardSleep;\r
-\r
- if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )\r
- {\r
- /* A task was made ready while the scheduler was suspended. */\r
- eReturn = eAbortSleep;\r
- }\r
- else if( xYieldPending != pdFALSE )\r
- {\r
- /* A yield was pended while the scheduler was suspended. */\r
- eReturn = eAbortSleep;\r
- }\r
- else\r
- {\r
- /* If all the tasks are in the suspended list (which might mean they\r
- have an infinite block time rather than actually being suspended)\r
- then it is safe to turn all clocks off and just wait for external\r
- interrupts. */\r
- if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == ( uxCurrentNumberOfTasks - uxNonApplicationTasks ) )\r
- {\r
- eReturn = eNoTasksWaitingTimeout;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
-\r
- return eReturn;\r
- }\r
-\r
-#endif /* configUSE_TICKLESS_IDLE */\r
-/*-----------------------------------------------------------*/\r
-\r
-static void prvInitialiseTCBVariables( TCB_t * const pxTCB, const char * const pcName, UBaseType_t uxPriority, const MemoryRegion_t * const xRegions, const uint16_t usStackDepth ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */\r
-{\r
-UBaseType_t x;\r
-\r
- /* Store the task name in the TCB. */\r
- for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )\r
- {\r
- pxTCB->pcTaskName[ x ] = pcName[ x ];\r
-\r
- /* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than\r
- configMAX_TASK_NAME_LEN characters just in case the memory after the\r
- string is not accessible (extremely unlikely). */\r
- if( pcName[ x ] == 0x00 )\r
- {\r
- break;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
-\r
- /* Ensure the name string is terminated in the case that the string length\r
- was greater or equal to configMAX_TASK_NAME_LEN. */\r
- pxTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';\r
-\r
- /* This is used as an array index so must ensure it's not too large. First\r
- remove the privilege bit if one is present. */\r
- if( uxPriority >= ( UBaseType_t ) configMAX_PRIORITIES )\r
- {\r
- uxPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
-\r
- pxTCB->uxPriority = uxPriority;\r
- #if ( configUSE_MUTEXES == 1 )\r
- {\r
- pxTCB->uxBasePriority = uxPriority;\r
- pxTCB->uxMutexesHeld = 0;\r
- }\r
- #endif /* configUSE_MUTEXES */\r
-\r
- vListInitialiseItem( &( pxTCB->xStateListItem ) );\r
- vListInitialiseItem( &( pxTCB->xEventListItem ) );\r
-\r
- /* Set the pxTCB as a link back from the ListItem_t. This is so we can get\r
- back to the containing TCB from a generic item in a list. */\r
- listSET_LIST_ITEM_OWNER( &( pxTCB->xStateListItem ), pxTCB );\r
-\r
- /* Event lists are always in priority order. */\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
- listSET_LIST_ITEM_OWNER( &( pxTCB->xEventListItem ), pxTCB );\r
-\r
- #if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
- {\r
- pxTCB->uxCriticalNesting = ( UBaseType_t ) 0U;\r
- }\r
- #endif /* portCRITICAL_NESTING_IN_TCB */\r
-\r
- #if ( configUSE_APPLICATION_TASK_TAG == 1 )\r
- {\r
- pxTCB->pxTaskTag = NULL;\r
+ traceLOW_POWER_IDLE_END();\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ ( void ) xTaskResumeAll();\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ #endif /* configUSE_TICKLESS_IDLE */\r
}\r
- #endif /* configUSE_APPLICATION_TASK_TAG */\r
+}\r
+/*-----------------------------------------------------------*/\r
\r
- #if ( configGENERATE_RUN_TIME_STATS == 1 )\r
- {\r
- pxTCB->ulRunTimeCounter = 0UL;\r
- }\r
- #endif /* configGENERATE_RUN_TIME_STATS */\r
+#if( configUSE_TICKLESS_IDLE != 0 )\r
\r
- #if ( portUSING_MPU_WRAPPERS == 1 )\r
- {\r
- vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, pxTCB->pxStack, usStackDepth );\r
- }\r
- #else /* portUSING_MPU_WRAPPERS */\r
+ eSleepModeStatus eTaskConfirmSleepModeStatus( void )\r
{\r
- ( void ) xRegions;\r
- ( void ) usStackDepth;\r
- }\r
- #endif /* portUSING_MPU_WRAPPERS */\r
+ /* The idle task exists in addition to the application tasks. */\r
+ const UBaseType_t uxNonApplicationTasks = 1;\r
+ eSleepModeStatus eReturn = eStandardSleep;\r
\r
- #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )\r
- {\r
- for( x = 0; x < ( UBaseType_t ) configNUM_THREAD_LOCAL_STORAGE_POINTERS; x++ )\r
+ if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )\r
{\r
- pxTCB->pvThreadLocalStoragePointers[ x ] = NULL;\r
+ /* A task was made ready while the scheduler was suspended. */\r
+ eReturn = eAbortSleep;\r
+ }\r
+ else if( xYieldPending != pdFALSE )\r
+ {\r
+ /* A yield was pended while the scheduler was suspended. */\r
+ eReturn = eAbortSleep;\r
+ }\r
+ else\r
+ {\r
+ /* If all the tasks are in the suspended list (which might mean they\r
+ have an infinite block time rather than actually being suspended)\r
+ then it is safe to turn all clocks off and just wait for external\r
+ interrupts. */\r
+ if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == ( uxCurrentNumberOfTasks - uxNonApplicationTasks ) )\r
+ {\r
+ eReturn = eNoTasksWaitingTimeout;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
}\r
- }\r
- #endif\r
-\r
- #if ( configUSE_TASK_NOTIFICATIONS == 1 )\r
- {\r
- pxTCB->ulNotifiedValue = 0;\r
- pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;\r
- }\r
- #endif\r
\r
- #if ( configUSE_NEWLIB_REENTRANT == 1 )\r
- {\r
- /* Initialise this task's Newlib reent structure. */\r
- _REENT_INIT_PTR( ( &( pxTCB->xNewLib_reent ) ) );\r
+ return eReturn;\r
}\r
- #endif\r
\r
- #if( INCLUDE_xTaskAbortDelay == 1 )\r
- {\r
- pxTCB->ucDelayAborted = pdFALSE;\r
- }\r
- #endif\r
-}\r
+#endif /* configUSE_TICKLESS_IDLE */\r
/*-----------------------------------------------------------*/\r
\r
#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )\r
static void prvCheckTasksWaitingTermination( void )\r
{\r
\r
- /** THIS FUNCTION IS CALLED FROM THE RTOS IDLE TASK **/\r
+ /** THIS FUNCTION IS CALLED FROM THE RTOS IDLE TASK **/\r
\r
#if ( INCLUDE_vTaskDelete == 1 )\r
{\r
}\r
/*-----------------------------------------------------------*/\r
\r
-static TCB_t *prvAllocateTCBAndStack( const uint16_t usStackDepth, StackType_t * const puxStackBuffer, TCB_t * const pxTaskBuffer )\r
-{\r
-TCB_t *pxNewTCB;\r
-\r
- #if( ( configASSERT_DEFINED == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )\r
- {\r
- /* Sanity check that the size of the structure used to declare a\r
- variable of type StaticTask_t matches the size of the actual TCB_t\r
- structure. */\r
- volatile size_t xSize = sizeof( StaticTask_t );\r
- configASSERT( xSize == sizeof( TCB_t ) );\r
- }\r
- #endif /* configASSERT_DEFINED */\r
-\r
- /* If the stack grows down then allocate the stack then the TCB so the stack\r
- does not grow into the TCB. Likewise if the stack grows up then allocate\r
- the TCB then the stack. */\r
- #if( portSTACK_GROWTH > 0 )\r
- {\r
- /* Allocate space for the TCB. Where the memory comes from depends on\r
- the implementation of the port malloc function. */\r
- pxNewTCB = ( TCB_t * ) pvPortMallocAligned( sizeof( TCB_t ), pxTaskBuffer );\r
-\r
- if( pxNewTCB != NULL )\r
- {\r
- /* Allocate space for the stack used by the task being created.\r
- The base of the stack memory stored in the TCB so the task can\r
- be deleted later if required. */\r
- pxNewTCB->pxStack = ( StackType_t * ) pvPortMallocAligned( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ), puxStackBuffer ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
-\r
- if( pxNewTCB->pxStack == NULL )\r
- {\r
- /* Could not allocate the stack. Delete the allocated TCB - if\r
- it was allocated dynamically. */\r
- if( pxTaskBuffer == NULL )\r
- {\r
- vPortFree( pxNewTCB );\r
- }\r
- pxNewTCB = NULL;\r
- }\r
- }\r
- }\r
- #else /* portSTACK_GROWTH */\r
- {\r
- StackType_t *pxStack;\r
-\r
- /* Allocate space for the stack used by the task being created. */\r
- pxStack = ( StackType_t * ) pvPortMallocAligned( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ), puxStackBuffer ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
-\r
- if( pxStack != NULL )\r
- {\r
- /* Allocate space for the TCB. */\r
- pxNewTCB = ( TCB_t * ) pvPortMallocAligned( sizeof( TCB_t ), pxTaskBuffer ); /*lint !e961 MISRA exception as the casts are only redundant for some paths. */\r
-\r
- if( pxNewTCB != NULL )\r
- {\r
- /* Store the stack location in the TCB. */\r
- pxNewTCB->pxStack = pxStack;\r
- }\r
- else\r
- {\r
- /* The stack cannot be used as the TCB was not created. Free it\r
- again. */\r
- if( puxStackBuffer == NULL )\r
- {\r
- vPortFree( pxStack );\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- }\r
- else\r
- {\r
- pxNewTCB = NULL;\r
- }\r
- }\r
- #endif /* portSTACK_GROWTH */\r
-\r
- if( pxNewTCB != NULL )\r
- {\r
- /* Avoid dependency on memset() if it is not required. */\r
- #if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )\r
- {\r
- /* Just to help debugging. */\r
- ( void ) memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) usStackDepth * sizeof( StackType_t ) );\r
- }\r
- #endif /* ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) ) */\r
-\r
- #if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
- {\r
- pxNewTCB->ucStaticAllocationFlags = 0;\r
-\r
- if( puxStackBuffer != NULL )\r
- {\r
- /* The application provided its own stack - note the fact so no\r
- attempt is made to delete the stack if the task is deleted. */\r
- pxNewTCB->ucStaticAllocationFlags |= taskSTATICALLY_ALLOCATED_STACK;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
-\r
- if( pxTaskBuffer != NULL )\r
- {\r
- /* The application provided its own TCB. Note the fact so no\r
- attempt is made to delete the TCB if the task is deleted. */\r
- pxNewTCB->ucStaticAllocationFlags |= taskSTATICALLY_ALLOCATED_TCB;\r
- }\r
- else\r
- {\r
- mtCOVERAGE_TEST_MARKER();\r
- }\r
- }\r
- #endif /* configSUPPORT_STATIC_ALLOCATION */\r
- }\r
-\r
- return pxNewTCB;\r
-}\r
-/*-----------------------------------------------------------*/\r
-\r
#if( configUSE_TRACE_FACILITY == 1 )\r
\r
- void vTaskGetTaskInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState )\r
+ void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState )\r
{\r
TCB_t *pxTCB;\r
\r
pxTaskStatus->eCurrentState = eBlocked;\r
}\r
}\r
- xTaskResumeAll();\r
+ ( void ) xTaskResumeAll();\r
}\r
}\r
#endif /* INCLUDE_vTaskSuspend */\r
\r
static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState )\r
{\r
- volatile TCB_t *pxNextTCB, *pxFirstTCB;\r
+ configLIST_VOLATILE TCB_t *pxNextTCB, *pxFirstTCB;\r
UBaseType_t uxTask = 0;\r
\r
if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )\r
do\r
{\r
listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );\r
- vTaskGetTaskInfo( ( TaskHandle_t ) pxNextTCB, &( pxTaskStatusArray[ uxTask ] ), pdTRUE, eState );\r
+ vTaskGetInfo( ( TaskHandle_t ) pxNextTCB, &( pxTaskStatusArray[ uxTask ] ), pdTRUE, eState );\r
uxTask++;\r
} while( pxNextTCB != pxFirstTCB );\r
}\r
}\r
#endif /* configUSE_NEWLIB_REENTRANT */\r
\r
- #if( configSUPPORT_STATIC_ALLOCATION == 1 )\r
+ #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( portUSING_MPU_WRAPPERS == 0 ) )\r
{\r
- /* Only free the stack and TCB if they were allocated dynamically in\r
- the first place. */\r
- if( ( pxTCB->ucStaticAllocationFlags & taskSTATICALLY_ALLOCATED_STACK ) == ( uint8_t ) 0 )\r
- {\r
- vPortFreeAligned( pxTCB->pxStack );\r
- }\r
- else\r
+ /* The task can only have been allocated dynamically - free both\r
+ the stack and TCB. */\r
+ vPortFree( pxTCB->pxStack );\r
+ vPortFree( pxTCB );\r
+ }\r
+ #elif( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 ) /*lint !e731 Macro has been consolidated for readability reasons. */\r
+ {\r
+ /* The task could have been allocated statically or dynamically, so\r
+ check what was statically allocated before trying to free the\r
+ memory. */\r
+ if( pxTCB->ucStaticallyAllocated == tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB )\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
+ /* Both the stack and TCB were allocated dynamically, so both\r
+ must be freed. */\r
+ vPortFree( pxTCB->pxStack );\r
+ vPortFree( pxTCB );\r
}\r
-\r
- if( ( pxTCB->ucStaticAllocationFlags & taskSTATICALLY_ALLOCATED_TCB ) == ( uint8_t ) 0 )\r
+ else if( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_ONLY )\r
{\r
- vPortFreeAligned( pxTCB );\r
+ /* Only the stack was statically allocated, so the TCB is the\r
+ only memory that must be freed. */\r
+ vPortFree( pxTCB );\r
}\r
else\r
{\r
+ /* Neither the stack nor the TCB were allocated dynamically, so\r
+ nothing needs to be freed. */\r
+ configASSERT( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_AND_TCB )\r
mtCOVERAGE_TEST_MARKER();\r
}\r
}\r
- #else\r
- {\r
- vPortFreeAligned( pxTCB->pxStack );\r
- vPortFree( pxTCB );\r
- }\r
- #endif\r
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */\r
}\r
\r
#endif /* INCLUDE_vTaskDelete */\r
\r
#if ( configUSE_MUTEXES == 1 )\r
\r
- void vTaskPriorityInherit( TaskHandle_t const pxMutexHolder )\r
+ BaseType_t xTaskPriorityInherit( TaskHandle_t const pxMutexHolder )\r
{\r
- TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;\r
+ TCB_t * const pxMutexHolderTCB = ( TCB_t * ) pxMutexHolder;\r
+ BaseType_t xReturn = pdFALSE;\r
\r
/* If the mutex was given back by an interrupt while the queue was\r
- locked then the mutex holder might now be NULL. */\r
+ locked then the mutex holder might now be NULL. _RB_ Is this still\r
+ needed as interrupts can no longer use mutexes? */\r
if( pxMutexHolder != NULL )\r
{\r
/* If the holder of the mutex has a priority below the priority of\r
the task attempting to obtain the mutex then it will temporarily\r
inherit the priority of the task attempting to obtain the mutex. */\r
- if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )\r
+ if( pxMutexHolderTCB->uxPriority < pxCurrentTCB->uxPriority )\r
{\r
/* Adjust the mutex holder state to account for its new\r
priority. Only reset the event list item value if the value is\r
- not being used for anything else. */\r
- if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )\r
+ not being used for anything else. */\r
+ if( ( listGET_LIST_ITEM_VALUE( &( pxMutexHolderTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )\r
{\r
- listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+ listSET_LIST_ITEM_VALUE( &( pxMutexHolderTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
}\r
else\r
{\r
\r
/* If the task being modified is in the ready state it will need\r
to be moved into a new list. */\r
- if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )\r
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxMutexHolderTCB->uxPriority ] ), &( pxMutexHolderTCB->xStateListItem ) ) != pdFALSE )\r
{\r
- if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
+ if( uxListRemove( &( pxMutexHolderTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
- taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
+ taskRESET_READY_PRIORITY( pxMutexHolderTCB->uxPriority );\r
}\r
else\r
{\r
}\r
\r
/* Inherit the priority before being moved into the new list. */\r
- pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
- prvAddTaskToReadyList( pxTCB );\r
+ pxMutexHolderTCB->uxPriority = pxCurrentTCB->uxPriority;\r
+ prvAddTaskToReadyList( pxMutexHolderTCB );\r
}\r
else\r
{\r
/* Just inherit the priority. */\r
- pxTCB->uxPriority = pxCurrentTCB->uxPriority;\r
+ pxMutexHolderTCB->uxPriority = pxCurrentTCB->uxPriority;\r
}\r
\r
- traceTASK_PRIORITY_INHERIT( pxTCB, pxCurrentTCB->uxPriority );\r
+ traceTASK_PRIORITY_INHERIT( pxMutexHolderTCB, pxCurrentTCB->uxPriority );\r
+\r
+ /* Inheritance occurred. */\r
+ xReturn = pdTRUE;\r
}\r
else\r
{\r
- mtCOVERAGE_TEST_MARKER();\r
+ if( pxMutexHolderTCB->uxBasePriority < pxCurrentTCB->uxPriority )\r
+ {\r
+ /* The base priority of the mutex holder is lower than the\r
+ priority of the task attempting to take the mutex, but the\r
+ current priority of the mutex holder is not lower than the\r
+ priority of the task attempting to take the mutex.\r
+ Therefore the mutex holder must have already inherited a\r
+ priority, but inheritance would have occurred if that had\r
+ not been the case. */\r
+ xReturn = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
}\r
}\r
else\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
+\r
+ return xReturn;\r
}\r
\r
#endif /* configUSE_MUTEXES */\r
interrupt, and if a mutex is given by the holding task then it must\r
be the running state task. */\r
configASSERT( pxTCB == pxCurrentTCB );\r
-\r
configASSERT( pxTCB->uxMutexesHeld );\r
( pxTCB->uxMutexesHeld )--;\r
\r
/* A task can only have an inherited priority if it holds\r
the mutex. If the mutex is held by a task then it cannot be\r
given from an interrupt, and if a mutex is given by the\r
- holding task then it must be the running state task. Remove\r
- the holding task from the ready list. */\r
+ holding task then it must be the running state task. Remove\r
+ the holding task from the ready list. */\r
if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
{\r
taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
#endif /* configUSE_MUTEXES */\r
/*-----------------------------------------------------------*/\r
\r
+#if ( configUSE_MUTEXES == 1 )\r
+\r
+ void vTaskPriorityDisinheritAfterTimeout( TaskHandle_t const pxMutexHolder, UBaseType_t uxHighestPriorityWaitingTask )\r
+ {\r
+ TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;\r
+ UBaseType_t uxPriorityUsedOnEntry, uxPriorityToUse;\r
+ const UBaseType_t uxOnlyOneMutexHeld = ( UBaseType_t ) 1;\r
+\r
+ if( pxMutexHolder != NULL )\r
+ {\r
+ /* If pxMutexHolder is not NULL then the holder must hold at least\r
+ one mutex. */\r
+ configASSERT( pxTCB->uxMutexesHeld );\r
+\r
+ /* Determine the priority to which the priority of the task that\r
+ holds the mutex should be set. This will be the greater of the\r
+ holding task's base priority and the priority of the highest\r
+ priority task that is waiting to obtain the mutex. */\r
+ if( pxTCB->uxBasePriority < uxHighestPriorityWaitingTask )\r
+ {\r
+ uxPriorityToUse = uxHighestPriorityWaitingTask;\r
+ }\r
+ else\r
+ {\r
+ uxPriorityToUse = pxTCB->uxBasePriority;\r
+ }\r
+\r
+ /* Does the priority need to change? */\r
+ if( pxTCB->uxPriority != uxPriorityToUse )\r
+ {\r
+ /* Only disinherit if no other mutexes are held. This is a\r
+ simplification in the priority inheritance implementation. If\r
+ the task that holds the mutex is also holding other mutexes then\r
+ the other mutexes may have caused the priority inheritance. */\r
+ if( pxTCB->uxMutexesHeld == uxOnlyOneMutexHeld )\r
+ {\r
+ /* If a task has timed out because it already holds the\r
+ mutex it was trying to obtain then it cannot of inherited\r
+ its own priority. */\r
+ configASSERT( pxTCB != pxCurrentTCB );\r
+\r
+ /* Disinherit the priority, remembering the previous\r
+ priority to facilitate determining the subject task's\r
+ state. */\r
+ traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );\r
+ uxPriorityUsedOnEntry = pxTCB->uxPriority;\r
+ pxTCB->uxPriority = uxPriorityToUse;\r
+\r
+ /* Only reset the event list item value if the value is not\r
+ being used for anything else. */\r
+ if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )\r
+ {\r
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriorityToUse ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+\r
+ /* If the running task is not the task that holds the mutex\r
+ then the task that holds the mutex could be in either the\r
+ Ready, Blocked or Suspended states. Only remove the task\r
+ from its current state list if it is in the Ready state as\r
+ the task's priority is going to change and there is one\r
+ Ready list per priority. */\r
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )\r
+ {\r
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )\r
+ {\r
+ taskRESET_READY_PRIORITY( pxTCB->uxPriority );\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+\r
+ prvAddTaskToReadyList( pxTCB );\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+ else\r
+ {\r
+ mtCOVERAGE_TEST_MARKER();\r
+ }\r
+ }\r
+\r
+#endif /* configUSE_MUTEXES */\r
+/*-----------------------------------------------------------*/\r
+\r
#if ( portCRITICAL_NESTING_IN_TCB == 1 )\r
\r
void vTaskEnterCritical( void )\r
#endif /* ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) */\r
/*-----------------------------------------------------------*/\r
\r
-#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )\r
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )\r
\r
void vTaskList( char * pcWriteBuffer )\r
{\r
function is executing. */\r
uxArraySize = uxCurrentNumberOfTasks;\r
\r
- /* Allocate an array index for each task. */\r
+ /* Allocate an array index for each task. NOTE! if\r
+ configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will\r
+ equate to NULL. */\r
pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );\r
\r
if( pxTaskStatusArray != NULL )\r
pcWriteBuffer += strlen( pcWriteBuffer );\r
}\r
\r
- /* Free the array again. */\r
+ /* Free the array again. NOTE! If configSUPPORT_DYNAMIC_ALLOCATION\r
+ is 0 then vPortFree() will be #defined to nothing. */\r
vPortFree( pxTaskStatusArray );\r
}\r
else\r
}\r
}\r
\r
-#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */\r
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */\r
/*----------------------------------------------------------*/\r
\r
-#if ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )\r
+#if ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )\r
\r
void vTaskGetRunTimeStats( char *pcWriteBuffer )\r
{\r
function is executing. */\r
uxArraySize = uxCurrentNumberOfTasks;\r
\r
- /* Allocate an array index for each task. */\r
+ /* Allocate an array index for each task. NOTE! If\r
+ configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will\r
+ equate to NULL. */\r
pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );\r
\r
if( pxTaskStatusArray != NULL )\r
mtCOVERAGE_TEST_MARKER();\r
}\r
\r
- /* Free the array again. */\r
+ /* Free the array again. NOTE! If configSUPPORT_DYNAMIC_ALLOCATION\r
+ is 0 then vPortFree() will be #defined to nothing. */\r
vPortFree( pxTaskStatusArray );\r
}\r
else\r
}\r
}\r
\r
-#endif /* ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */\r
+#endif /* ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) ) */\r
/*-----------------------------------------------------------*/\r
\r
TickType_t uxTaskResetEventItemValue( void )\r
}\r
else\r
{\r
- ( pxCurrentTCB->ulNotifiedValue )--;\r
+ pxCurrentTCB->ulNotifiedValue = ulReturn - ( uint32_t ) 1;\r
}\r
}\r
else\r
blocked state (because a notification was already pending) or the\r
task unblocked because of a notification. Otherwise the task\r
unblocked because of a timeout. */\r
- if( pxCurrentTCB->ucNotifyState == taskWAITING_NOTIFICATION )\r
+ if( pxCurrentTCB->ucNotifyState != taskNOTIFICATION_RECEIVED )\r
{\r
/* A notification was not received. */\r
xReturn = pdFALSE;\r
static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely )\r
{\r
TickType_t xTimeToWake;\r
+const TickType_t xConstTickCount = xTickCount;\r
\r
#if( INCLUDE_xTaskAbortDelay == 1 )\r
{\r
mtCOVERAGE_TEST_MARKER();\r
}\r
\r
-\r
#if ( INCLUDE_vTaskSuspend == 1 )\r
{\r
if( ( xTicksToWait == portMAX_DELAY ) && ( xCanBlockIndefinitely != pdFALSE ) )\r
/* Calculate the time at which the task should be woken if the event\r
does not occur. This may overflow but this doesn't matter, the\r
kernel will manage it correctly. */\r
- xTimeToWake = xTickCount + xTicksToWait;\r
+ xTimeToWake = xConstTickCount + xTicksToWait;\r
\r
/* The list item will be inserted in wake time order. */\r
listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );\r
\r
- if( xTimeToWake < xTickCount )\r
+ if( xTimeToWake < xConstTickCount )\r
{\r
/* Wake time has overflowed. Place this item in the overflow\r
list. */\r
/* Calculate the time at which the task should be woken if the event\r
does not occur. This may overflow but this doesn't matter, the kernel\r
will manage it correctly. */\r
- xTimeToWake = xTickCount + xTicksToWait;\r
+ xTimeToWake = xConstTickCount + xTicksToWait;\r
\r
/* The list item will be inserted in wake time order. */\r
listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );\r
\r
- if( xTimeToWake < xTickCount )\r
+ if( xTimeToWake < xConstTickCount )\r
{\r
/* Wake time has overflowed. Place this item in the overflow list. */\r
vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );\r
#endif /* INCLUDE_vTaskSuspend */\r
}\r
\r
+/* Code below here allows additional code to be inserted into this source file,\r
+especially where access to file scope functions and data is needed (for example\r
+when performing module tests). */\r
\r
#ifdef FREERTOS_MODULE_TEST\r
#include "tasks_test_access_functions.h"\r
#endif\r
\r
+\r
+#if( configINCLUDE_FREERTOS_TASK_C_ADDITIONS_H == 1 )\r
+\r
+ #include "freertos_tasks_c_additions.h"\r
+\r
+ static void freertos_tasks_c_additions_init( void )\r
+ {\r
+ #ifdef FREERTOS_TASKS_C_ADDITIONS_INIT\r
+ FREERTOS_TASKS_C_ADDITIONS_INIT();\r
+ #endif\r
+ }\r
+\r
+#endif\r
+\r
+\r