-UNAME=$(shell uname)
-DEBUG=1
-INSTALL=install
-GIT_VERSION=$(shell git describe --tags --always)
-VERSION=$(shell git describe --tags --abbrev=0)
-
-CFLAGS += -std=c99
-CFLAGS += -pipe
-CFLAGS += -Wall
-CFLAGS += -Wunused
-CFLAGS += -Iinclude
-CFLAGS += -I/usr/local/include
-CFLAGS += -DI3_VERSION=\"${GIT_VERSION}\"
-
-# Check if pkg-config is installed, because without pkg-config, the following
-# check for the version of libxcb cannot be done.
-ifeq ($(shell which pkg-config 2>/dev/null 1>/dev/null || echo 1),1)
-$(error "pkg-config was not found")
-endif
-
-ifeq ($(shell pkg-config --exists xcb-keysyms || echo 1),1)
-$(error "pkg-config could not find xcb-keysyms.pc")
-endif
-
-ifeq ($(shell pkg-config --exact-version=0.3.3 xcb-keysyms && echo 1),1)
-# xcb-keysyms fixed API from 0.3.3 to 0.3.4, so for some months, we will
-# have this here. Distributions should upgrade their libxcb in the meantime.
-CFLAGS += -DOLD_XCB_KEYSYMS_API
-endif
-
-LDFLAGS += -lm
-LDFLAGS += -lxcb-event
-LDFLAGS += -lxcb-property
-LDFLAGS += -lxcb-keysyms
-LDFLAGS += -lxcb-atom
-LDFLAGS += -lxcb-aux
-LDFLAGS += -lxcb-icccm
-LDFLAGS += -lxcb-xinerama
-LDFLAGS += -lX11
-LDFLAGS += -L/usr/local/lib -L/usr/pkg/lib
-
-ifeq ($(UNAME),NetBSD)
-# We need -idirafter instead of -I to prefer the system’s iconv over GNU libiconv
-CFLAGS += -idirafter /usr/pkg/include
-LDFLAGS += -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/pkg/lib
-endif
+TOPDIR=$(shell pwd)
-ifeq ($(UNAME),FreeBSD)
-LDFLAGS += -liconv
-endif
-
-ifeq ($(UNAME),Linux)
-CFLAGS += -D_GNU_SOURCE
-endif
+include $(TOPDIR)/common.mk
-ifeq ($(DEBUG),1)
-# Extended debugging flags, macros shall be available in gcc
-CFLAGS += -gdwarf-2
-CFLAGS += -g3
+# Depend on the object files of all source-files in src/*.c and on all header files
+AUTOGENERATED:=src/cfgparse.tab.c src/cfgparse.yy.c src/cmdparse.tab.c src/cmdparse.yy.c
+FILES:=$(filter-out $(AUTOGENERATED),$(wildcard src/*.c))
+FILES:=$(FILES:.c=.o)
+HEADERS:=$(filter-out include/loglevels.h,$(wildcard include/*.h))
+
+# Recursively generate loglevels.h by explicitly calling make
+# We need this step because we need to ensure that loglevels.h will be
+# updated if necessary, but we also want to save rebuilds of the object
+# files, so we cannot let the object files depend on loglevels.h.
+ifeq ($(MAKECMDGOALS),loglevels.h)
+#UNUSED:=$(warning Generating loglevels.h)
else
-CFLAGS += -O2
+UNUSED:=$(shell $(MAKE) loglevels.h)
endif
-# Don’t print command lines which are run
-.SILENT:
-
-# Always remake the following targets
-.PHONY: install clean dist distclean
-
-# Depend on the object files of all source-files in src/*.c and on all header files
-FILES=$(patsubst %.c,%.o,$(wildcard src/*.c))
-HEADERS=$(wildcard include/*.h)
+SUBDIRS:=i3-msg i3-input i3-nagbar i3-config-wizard i3bar i3-dump-log
# Depend on the specific file (.c for each .o) and on all headers
src/%.o: src/%.c ${HEADERS}
- echo "CC $<"
- $(CC) $(CFLAGS) -c -o $@ $<
+ echo "[i3] CC $<"
+ $(CC) $(CPPFLAGS) $(CFLAGS) -DLOGLEVEL="((uint64_t)1 << $(shell awk '/$(shell basename $< .c)/ { print NR; exit 0; }' loglevels.tmp))" -c -o $@ $<
+
+all: i3 subdirs
+
+i3: libi3/libi3.a src/cfgparse.y.o src/cfgparse.yy.o src/cmdparse.y.o src/cmdparse.yy.o ${FILES}
+ echo "[i3] LINK i3"
+ $(CC) $(LDFLAGS) -o $@ $(filter-out libi3/libi3.a,$^) $(LIBS)
+
+libi3/%.a: libi3/*.c
+ $(MAKE) -C libi3
+
+subdirs:
+ for dir in $(SUBDIRS); do \
+ echo ""; \
+ echo "MAKE $$dir"; \
+ $(MAKE) -C $$dir; \
+ done
+
+loglevels.h:
+ echo "[i3] LOGLEVELS"
+ for file in $$(ls src/*.c src/*.y src/*.l | grep -v 'cfgparse.\(tab\|yy\).c'); \
+ do \
+ echo $$(basename $$file .c); \
+ done > loglevels.tmp
+ (echo "char *loglevels[] = {"; for file in $$(cat loglevels.tmp); \
+ do \
+ echo "\"$$file\", "; \
+ done; \
+ echo "};") > include/loglevels.h;
+
+src/cfgparse.yy.o: src/cfgparse.l src/cfgparse.y.o ${HEADERS}
+ echo "[i3] LEX $<"
+ $(FLEX) -i -o$(@:.o=.c) $<
+ $(CC) $(CPPFLAGS) $(CFLAGS) -DLOGLEVEL="(1 << $(shell awk '/cfgparse.l/ { print NR }' loglevels.tmp))" -c -o $@ $(@:.o=.c)
+
+src/cmdparse.yy.o: src/cmdparse.l src/cmdparse.y.o ${HEADERS}
+ echo "[i3] LEX $<"
+ $(FLEX) -Pcmdyy -i -o$(@:.o=.c) $<
+ $(CC) $(CPPFLAGS) $(CFLAGS) -DLOGLEVEL="(1 << $(shell awk '/cmdparse.l/ { print NR }' loglevels.tmp))" -c -o $@ $(@:.o=.c)
+
+
+src/cfgparse.y.o: src/cfgparse.y ${HEADERS}
+ echo "[i3] YACC $<"
+ $(BISON) --debug --verbose -b $(basename $< .y) -d $<
+ $(CC) $(CPPFLAGS) $(CFLAGS) -DLOGLEVEL="(1 << $(shell awk '/cfgparse.y/ { print NR }' loglevels.tmp))" -c -o $@ $(<:.y=.tab.c)
+
+src/cmdparse.y.o: src/cmdparse.y ${HEADERS}
+ echo "[i3] YACC $<"
+ $(BISON) -p cmdyy --debug --verbose -b $(basename $< .y) -d $<
+ $(CC) $(CPPFLAGS) $(CFLAGS) -DLOGLEVEL="(1 << $(shell awk '/cmdparse.y/ { print NR }' loglevels.tmp))" -c -o $@ $(<:.y=.tab.c)
-all: ${FILES}
- echo "LINK i3"
- $(CC) -o i3 ${FILES} $(LDFLAGS)
install: all
- echo "INSTALL"
- $(INSTALL) -d -m 0755 $(DESTDIR)/usr/bin
- $(INSTALL) -d -m 0755 $(DESTDIR)/etc/i3
- $(INSTALL) -d -m 0755 $(DESTDIR)/usr/share/xsessions
- $(INSTALL) -m 0755 i3 $(DESTDIR)/usr/bin/
- test -e $(DESTDIR)/etc/i3/config || $(INSTALL) -m 0644 i3.config $(DESTDIR)/etc/i3/config
- $(INSTALL) -m 0644 i3.desktop $(DESTDIR)/usr/share/xsessions/
-
-dist: clean
+ echo "[i3] INSTALL"
+ $(INSTALL) -d -m 0755 $(DESTDIR)$(PREFIX)/bin
+ $(INSTALL) -d -m 0755 $(DESTDIR)$(SYSCONFDIR)/i3
+ $(INSTALL) -d -m 0755 $(DESTDIR)$(PREFIX)/include/i3
+ $(INSTALL) -d -m 0755 $(DESTDIR)$(PREFIX)/share/xsessions
+ $(INSTALL) -m 0755 i3 $(DESTDIR)$(PREFIX)/bin/
+ $(INSTALL) -m 0755 i3-migrate-config-to-v4 $(DESTDIR)$(PREFIX)/bin/
+ $(INSTALL) -m 0755 i3-sensible-editor $(DESTDIR)$(PREFIX)/bin/
+ $(INSTALL) -m 0755 i3-sensible-pager $(DESTDIR)$(PREFIX)/bin/
+ $(INSTALL) -m 0755 i3-sensible-terminal $(DESTDIR)$(PREFIX)/bin/
+ test -e $(DESTDIR)$(SYSCONFDIR)/i3/config || $(INSTALL) -m 0644 i3.config $(DESTDIR)$(SYSCONFDIR)/i3/config
+ test -e $(DESTDIR)$(SYSCONFDIR)/i3/config.keycodes || $(INSTALL) -m 0644 i3.config.keycodes $(DESTDIR)$(SYSCONFDIR)/i3/config.keycodes
+ $(INSTALL) -m 0644 i3.welcome $(DESTDIR)$(SYSCONFDIR)/i3/welcome
+ $(INSTALL) -m 0644 i3.desktop $(DESTDIR)$(PREFIX)/share/xsessions/
+ $(INSTALL) -m 0644 include/i3/ipc.h $(DESTDIR)$(PREFIX)/include/i3/
+ for dir in $(SUBDIRS); do \
+ $(MAKE) -C $$dir install; \
+ done
+
+dist: distclean
[ ! -d i3-${VERSION} ] || rm -rf i3-${VERSION}
[ ! -e i3-${VERSION}.tar.bz2 ] || rm i3-${VERSION}.tar.bz2
mkdir i3-${VERSION}
- cp DEPENDS GOALS LICENSE PACKAGE-MAINTAINER TODO RELEASE-* i3.config i3.desktop pseudo-doc.doxygen i3-${VERSION}
- cp -r src include man i3-${VERSION}
+ cp i3-migrate-config-to-v4 i3-sensible-* i3.config.keycodes DEPENDS GOALS LICENSE PACKAGE-MAINTAINER RELEASE-NOTES-${VERSION} i3.config i3.desktop i3.welcome pseudo-doc.doxygen i3-wsbar Makefile i3-${VERSION}
+ cp -r src libi3 i3-msg i3-nagbar i3-config-wizard i3bar i3-dump-log yajl-fallback include man i3-${VERSION}
# Only copy toplevel documentation (important stuff)
mkdir i3-${VERSION}/docs
- find docs -maxdepth 1 -type f ! -name "*.xcf" -exec cp '{}' i3-${VERSION}/docs \;
- sed -e 's/^GIT_VERSION=\(.*\)/GIT_VERSION=${GIT_VERSION}/g;s/^VERSION=\(.*\)/VERSION=${VERSION}/g' Makefile > i3-${VERSION}/Makefile
- tar cf i3-${VERSION}.tar i3-${VERSION}
- bzip2 -9 i3-${VERSION}.tar
+ # Pre-generate documentation
+ $(MAKE) -C docs
+ $(MAKE) -C i3bar/doc
+ # Cleanup τεχ output files
+ find docs -regex ".*\.\(aux\|out\|log\|toc\|bm\|dvi\|log\)" -exec rm '{}' \;
+ find docs -maxdepth 1 -type f ! \( -name "*.xcf" -or -name "*.svg" \) -exec cp '{}' i3-${VERSION}/docs \;
+ # Only copy source code from i3-input
+ mkdir i3-${VERSION}/i3-input
+ find i3-input -maxdepth 1 -type f \( -name "*.c" -or -name "*.h" -or -name "Makefile" \) -exec cp '{}' i3-${VERSION}/i3-input \;
+ sed -e 's/^GIT_VERSION:=\(.*\)/GIT_VERSION:=$(shell /bin/echo '${GIT_VERSION}' | sed 's/\\/\\\\/g')/g;s/^VERSION:=\(.*\)/VERSION:=${VERSION}/g' common.mk > i3-${VERSION}/common.mk
+ # Pre-generate a manpage to allow distributors to skip this step and save some dependencies
+ $(MAKE) -C man
+ cp man/*.1 i3-${VERSION}/man/
+ cp i3bar/doc/*.1 i3-${VERSION}/i3bar/doc/
+ tar cfj i3-${VERSION}.tar.bz2 i3-${VERSION}
rm -rf i3-${VERSION}
clean:
- rm -f src/*.o
+ rm -f src/*.o src/*.gcno src/cfgparse.tab.{c,h} src/cfgparse.yy.c src/cfgparse.{output,dot} src/cmdparse.tab.{c,h} src/cmdparse.yy.c src/cmdparse.{output,dot} loglevels.tmp include/loglevels.h
+ (which lcov >/dev/null 2>&1 && lcov -d . --zerocounters) || true
+ $(MAKE) -C libi3 clean
$(MAKE) -C docs clean
$(MAKE) -C man clean
+ for dir in $(SUBDIRS); do \
+ echo ""; \
+ echo "CLEAN $$dir"; \
+ $(MAKE) TOPDIR=$(TOPDIR) -C $$dir distclean; \
+ done
distclean: clean
rm -f i3
+ for dir in $(SUBDIRS); do \
+ echo ""; \
+ echo "DISTCLEAN $$dir"; \
+ $(MAKE) TOPDIR=$(TOPDIR) -C $$dir distclean; \
+ done
+
+coverage:
+ rm -f /tmp/i3-coverage.info
+ rm -rf /tmp/i3-coverage
+ lcov -d . -b . --capture -o /tmp/i3-coverage.info
+ genhtml -o /tmp/i3-coverage/ /tmp/i3-coverage.info