control registers. This behavior won't affect the
correctnessof 10/100 link speed update.
- CONFIG_SMC911X
- Support for SMSC's LAN911x and LAN921x chips
-
- CONFIG_SMC911X_BASE
- Define this to hold the physical address
- of the device (I/O space)
-
- CONFIG_SMC911X_32_BIT
- Define this if data bus is 32 bits
-
- CONFIG_SMC911X_16_BIT
- Define this if data bus is 16 bits. If your processor
- automatically converts one 32 bit word to two 16 bit
- words you may also try CONFIG_SMC911X_32_BIT.
-
CONFIG_SH_ETHER
Support for Renesas on-chip Ethernet controller
CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
the bootcounter.
CONFIG_BOOTCOUNT_ALEN = address len
+ CONFIG_BOOTCOUNT_EXT
+ enable support for the bootcounter in EXT filesystem
+ CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
+ and write.
+ CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
+ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
+ CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
Please see http://www.denx.de/wiki/U-Boot/Patches for details.
Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
-see http://lists.denx.de/mailman/listinfo/u-boot
+see https://lists.denx.de/listinfo/u-boot
When you send a patch, please include the following information with
it: