Examples:
U-Boot v2009.11 - Release November 2009
U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree
- U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+ U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
Directory Hierarchy:
Defines the string to utilize when trying to match PCIe device
tree nodes for the given platform.
- CONFIG_SYS_PPC_E500_DEBUG_TLB
-
- Enables a temporary TLB entry to be used during boot to work
- around limitations in e500v1 and e500v2 external debugger
- support. This reduces the portions of the boot code where
- breakpoints and single stepping do not work. The value of this
- symbol should be set to the TLB1 entry to be used for this
- purpose.
-
CONFIG_SYS_FSL_ERRATUM_A004510
Enables a workaround for erratum A004510. If set,
CONFIG_SYS_FSL_IFC_LE
Defines the IFC controller register space as Little Endian
+ CONFIG_SYS_FSL_IFC_CLK_DIV
+ Defines divider of platform clock(clock input to IFC controller).
+
+ CONFIG_SYS_FSL_LBC_CLK_DIV
+ Defines divider of platform clock(clock input to eLBC controller).
+
CONFIG_SYS_FSL_PBL_PBI
It enables addition of RCW (Power on reset configuration) in built image.
Please refer doc/README.pblimage for more details
port routines must be defined elsewhere
(i.e. serial_init(), serial_getc(), ...)
- CONFIG_CFB_CONSOLE
- Enables console device for a color framebuffer. Needs following
- defines (cf. smiLynxEM, i8042)
- VIDEO_FB_LITTLE_ENDIAN graphic memory organisation
- (default big endian)
- VIDEO_HW_RECTFILL graphic chip supports
- rectangle fill
- (cf. smiLynxEM)
- VIDEO_HW_BITBLT graphic chip supports
- bit-blit (cf. smiLynxEM)
- VIDEO_VISIBLE_COLS visible pixel columns
- (cols=pitch)
- VIDEO_VISIBLE_ROWS visible pixel rows
- VIDEO_PIXEL_SIZE bytes per pixel
- VIDEO_DATA_FORMAT graphic data format
- (0-5, cf. cfb_console.c)
- VIDEO_FB_ADRS framebuffer address
- VIDEO_KBD_INIT_FCT keyboard int fct
- (i.e. rx51_kp_init())
- VIDEO_TSTC_FCT test char fct
- (i.e. rx51_kp_tstc)
- VIDEO_GETC_FCT get char fct
- (i.e. rx51_kp_getc)
- CONFIG_VIDEO_LOGO display Linux logo in
- upper left corner
- CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
- linux_logo.h for logo.
- Requires CONFIG_VIDEO_LOGO
- CONFIG_CONSOLE_EXTRA_INFO
- additional board info beside
- the logo
- CONFIG_HIDE_LOGO_VERSION
- do not display bootloader
- version string
-
- When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
- a limited number of ANSI escape sequences (cursor control,
- erase functions and limited graphics rendition control).
-
- When CONFIG_CFB_CONSOLE is defined, video console is
- default i/o. Serial console can be forced with
- environment 'console=serial'.
-
- When CONFIG_SILENT_CONSOLE is defined, all console
- messages (by U-Boot and Linux!) can be silenced with
- the "silent" environment variable. See
- doc/README.silent for more information.
-
- CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
- is 0x00.
- CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
- is 0xa0.
-
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
must be defined, to setup the maximum idle timeout for
the SMC.
-- Pre-Console Buffer:
- Prior to the console being initialised (i.e. serial UART
- initialised etc) all console output is silently discarded.
- Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
- buffer any console messages prior to the console being
- initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
- bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
- a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
- bytes are output before the console is initialised, the
- earlier bytes are discarded.
-
- Note that when printing the buffer a copy is made on the
- stack so CONFIG_PRE_CON_BUF_SZ must fit on the stack.
-
- 'Sane' compilers will generate smaller code if
- CONFIG_PRE_CON_BUF_SZ is a power of 2
-
- Autoboot Command:
CONFIG_BOOTCOMMAND
Only needed when CONFIG_BOOTDELAY is enabled;
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
- CONFIG_GENERIC_MMC
- Enable the generic MMC driver
-
CONFIG_SUPPORT_EMMC_BOOT
Enable some additional features of the eMMC boot partitions.
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
CONFIG_CMD_CBFS
Define this to enable support for reading from a Coreboot
instead.
- Video support:
- CONFIG_VIDEO
-
- Define this to enable video support (for output to
- video).
-
- CONFIG_VIDEO_CT69000
-
- Enable Chips & Technologies 69000 Video chip
-
- CONFIG_VIDEO_SMI_LYNXEM
- Enable Silicon Motion SMI 712/710/810 Video chip. The
- video output is selected via environment 'videoout'
- (1 = LCD and 2 = CRT). If videoout is undefined, CRT is
- assumed.
-
- For the CT69000 and SMI_LYNXEM drivers, videomode is
- selected via environment 'videomode'. Two different ways
- are possible:
- - "videomode=num" 'num' is a standard LiLo mode numbers.
- Following standard modes are supported (* is default):
-
- Colors 640x480 800x600 1024x768 1152x864 1280x1024
- -------------+---------------------------------------------
- 8 bits | 0x301* 0x303 0x305 0x161 0x307
- 15 bits | 0x310 0x313 0x316 0x162 0x319
- 16 bits | 0x311 0x314 0x317 0x163 0x31A
- 24 bits | 0x312 0x315 0x318 ? 0x31B
- -------------+---------------------------------------------
- (i.e. setenv videomode 317; saveenv; reset;)
-
- - "videomode=bootargs" all the video parameters are parsed
- from the bootargs. (See drivers/video/videomodes.c)
-
-
- CONFIG_VIDEO_SED13806
- Enable Epson SED13806 driver. This driver supports 8bpp
- and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
- or CONFIG_VIDEO_SED13806_16BPP
-
CONFIG_FSL_DIU_FB
Enable the Freescale DIU video driver. Reference boards for
SOCs that have a DIU should define this macro to enable DIU
here, since it is cheaper to change data cache settings on
a per-section basis.
- CONFIG_CONSOLE_SCROLL_LINES
-
- When the console need to be scrolled, this is the number of
- lines to scroll by. It defaults to 1. Increasing this makes
- the console jump but can help speed up operation when scrolling
- is slow.
CONFIG_LCD_ROTATION
can be displayed via the splashscreen support or the
bmp command.
-- Do compressing for memory range:
- CONFIG_CMD_ZIP
-
- If this option is set, it would use zlib deflate method
- to compress the specified memory at its best effort.
-
- Compression support:
CONFIG_GZIP
A byte containing the id of the VLAN.
-- Status LED: CONFIG_STATUS_LED
+- Status LED: CONFIG_LED_STATUS
Several configurations allow to display the current
status using a LED. For instance, the LED will blink
soon as a reply to a BOOTP request was received, and
start blinking slow once the Linux kernel is running
(supported by a status LED driver in the Linux
- kernel). Defining CONFIG_STATUS_LED enables this
+ kernel). Defining CONFIG_LED_STATUS enables this
feature in U-Boot.
Additional options:
- CONFIG_GPIO_LED
+ CONFIG_LED_STATUS_GPIO
The status LED can be connected to a GPIO pin.
In such cases, the gpio_led driver can be used as a
- status LED backend implementation. Define CONFIG_GPIO_LED
+ status LED backend implementation. Define CONFIG_LED_STATUS_GPIO
to include the gpio_led driver in the U-Boot binary.
CONFIG_GPIO_LED_INVERTED_TABLE
this is instead controlled by the value of
/config/load-environment.
-- Parallel Flash support:
- CONFIG_SYS_NO_FLASH
-
- Traditionally U-Boot was run on systems with parallel NOR
- flash. This option is used to disable support for parallel NOR
- flash. This option should be defined if the board does not have
- parallel flash.
-
- If this option is not defined one of the generic flash drivers
- (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be
- selected or the board must provide an implementation of the
- flash API (see include/flash.h).
-
- DataFlash Support:
CONFIG_HAS_DATAFLASH
CONFIG_SPL_INIT_MINIMAL
Arch init code should be built for a very small image
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
- CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
- Address and partition on the MMC to load U-Boot from
- when the MMC is being used in raw mode.
-
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
Partition on the MMC to load U-Boot from when the MMC is being
used in raw mode
- CONFIG_SYS_BAUDRATE_TABLE:
List of legal baudrate settings for this board.
-- CONFIG_SYS_CONSOLE_INFO_QUIET
- Suppress display of console information at boot.
-
-- CONFIG_SYS_CONSOLE_IS_IN_ENV
- If the board specific function
- extern int overwrite_console (void);
- returns 1, the stdin, stderr and stdout are switched to the
- serial port, else the settings in the environment are used.
-
-- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
- Enable the call to overwrite_console().
-
-- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
- Enable overwrite of previous console environment settings.
-
- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
Begin and End addresses of the area used by the
simple memory test.
Define this to a string that is the name of the block device.
- - FAT_ENV_DEV_AND_PART:
+ - FAT_ENV_DEVICE_AND_PART:
Define this to a string to specify the partition of the device. It can
be as following:
addressable memory. This option causes some memory accesses
to be mapped through map_sysmem() / unmap_sysmem().
-- CONFIG_USE_ARCH_MEMCPY
- CONFIG_USE_ARCH_MEMSET
- If these options are used a optimized version of memcpy/memset will
- be used if available. These functions may be faster under some
- conditions but may increase the binary size.
-
- CONFIG_X86_RESET_VECTOR
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.