#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
-DECLARE_GLOBAL_DATA_PTR;
-
static u32 get_boot_device(void)
{
u32 val;
u32 boot_device;
+ /*
+ * First check, if UART boot-mode is active. This can only
+ * be done, via the bootrom error register. Here the
+ * MSB marks if the UART mode is active.
+ */
+ val = readl(CONFIG_BOOTROM_ERR_REG);
+ boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS;
+ debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device);
+ if (boot_device == BOOTROM_ERR_MODE_UART)
+ return BOOT_DEVICE_UART;
+
+ /*
+ * Now check the SAR register for the strapped boot-device
+ */
val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */
boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS;
+ debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device);
switch (boot_device) {
#ifdef CONFIG_SPL_MMC_SUPPORT
case BOOT_FROM_MMC:
return BOOT_DEVICE_MMC1;
#endif
case BOOT_FROM_UART:
+#ifdef BOOT_FROM_UART_ALT
+ case BOOT_FROM_UART_ALT:
+#endif
return BOOT_DEVICE_UART;
case BOOT_FROM_SPI:
default:
}
#ifdef CONFIG_SPL_MMC_SUPPORT
-u32 spl_boot_mode(void)
+u32 spl_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
timer_init();
+ /* Armada 375 does not support SerDes and DDR3 init yet */
+#if !defined(CONFIG_ARMADA_375)
/* First init the serdes PHY's */
serdes_phy_config();
/* Setup DDR */
ddr3_init();
+#endif
-#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
/*
* Return to the BootROM to continue the Marvell xmodem
* UART boot protocol. As initiated by the kwboot tool.
* need to return to the BootROM to enable this xmodem
* UART download.
*/
- return_to_bootrom();
-#endif
+ if (get_boot_device() == BOOT_DEVICE_UART)
+ return_to_bootrom();
}