#
# If you set in your Device resource
#
-# Changer Command = "path-to-this-script/mtx-changer" %c %o %S %a %d
+# Changer Command = "path-to-this-script/mtx-changer %c %o %S %a %d"
# you will have the following input to this script:
#
# So Bacula will always call with all the following arguments, even though
# in come cases, not all are used.
-
+#
# mtx-changer "changer-device" "command" "slot" "archive-device" "drive-index"
# $1 $2 $3 $4 $5
#
# the SCSI control channel is /dev/sg0, and the read/write device
# is /dev/nst0.
#
+# The commands are:
+# Command Function
+# unload unload a given slot
+# load load a given slot
+# loaded which slot is loaded?
+# list list Volume names (requires barcode reader)
+# slots how many slots total?
+#
+# Slots are numbered from 1 ...
+# Drives are numbered from 0 ...
+#
+#
# If you need to an offline, refer to the drive as $4
# e.g. mt -f $4 offline
#
MTX=@MTX@
+# mt status output
+# SunOS No Additional Sense
+# FreeBSD Current Driver State: at rest.
+# Linux ONLINE
+# Note Debian has a different mt than the standard Linux version.
+# When no tape is in the drive it waits 2 minutes.
+# When a tape is in the drive, it prints user unfriendly output.
+#
+
+OS=`uname`
+case ${OS} in
+ SunOS)
+ ready="No Additional Sense"
+ ;;
+ FreeBSD)
+ ready="Current Driver State: at rest."
+ ;;
+ Linux)
+ if test -e /etc/debian_version ; then
+ ready="drive status"
+ else
+ ready="ONLINE"
+ fi
+ ;;
+esac
+
+#
+# log whats done
+#
+# to turn on logging, uncomment the following line
+#touch @working_dir@/mtx.log
+#
+dbgfile="@working_dir@/mtx.log"
+debug() {
+ if test -f $dbgfile; then
+ echo "`date +\"%Y%m%d-%H:%M:%S\"` $*" >> $dbgfile
+ fi
+}
+
+
#
# Create a temporary file
#
make_temp_file() {
- TMPFILE=`mktemp -t mtx.XXXXXXXXXX`
+ TMPFILE=`mktemp @working_dir@/mtx.XXXXXXXXXX`
if test x${TMPFILE} = x; then
TMPFILE="@working_dir@/mtx.$$"
if test -f ${TMPFILE}; then
# Note, this is very system dependent, so if you are
# not running on Linux, you will probably need to
# re-write it, or at least change the grep target.
+# We've attempted to get the appropriate OS grep targets
+# in the code at the top of this script.
#
wait_for_drive() {
i=0
while [ $i -le 300 ]; do # Wait max 300 seconds
- if mt -f $1 status | grep ONLINE >/dev/null 2>&1; then
+ if mt -f $1 status 2>&1 | grep "${ready}" >/dev/null 2>&1; then
break
fi
-# echo "Device $1 - not ready, retrying..."
+ debug "Device $1 - not ready, retrying..."
sleep 1
i=`expr $i + 1`
done
}
+# check parameter count on commandline
+#
+check_parm_count() {
+ pCount=$1
+ pCountNeed=$2
+ if test $pCount -lt $pCountNeed; then
+ echo "usage: mtx-changer ctl-device command [slot archive-device drive-index]"
+ echo " Insufficient number of arguments given."
+ if test $pCount -lt 2; then
+ echo " Mimimum usage is first two arguments ..."
+ else
+ echo " Command expected $pCountNeed arguments"
+ fi
+ exit 1
+ fi
+}
+
+# Check for special cases where only 2 arguments are needed,
+# all others are a minimum of 5
+#
+case $2 in
+ list)
+ check_parm_count $# 2
+ ;;
+ slots)
+ check_parm_count $# 2
+ ;;
+ *)
+ check_parm_count $# 5
+ ;;
+esac
-if test $# -lt 2 ; then
- echo "usage: mtx-changer ctl-device command slot archive-device drive"
- echo " Insufficient number of arguments arguments given."
- echo " Mimimum usage is first two arguments ..."
- exit 1
-fi
# Setup arguments
ctl=$1
device=$4
drive=$5
-
-#
-# Check for special cases where only 2 arguments are needed,
-# all others are a minimum of 3
-case $cmd in
- list)
- ;;
- slots)
- ;;
- *)
- if test $# -lt 5; then
- echo "usage: mtx-changer ctl-device command slot archive-device drive"
- echo " Insufficient number of arguments arguments given."
- exit 1
- fi
- ;;
-esac
-
+debug "Parms: $ctl $cmd $slot $device $drive"
case $cmd in
unload)
-# echo "Doing mtx -f $ctl unload $slot $drive"
+ debug "Doing mtx -f $ctl unload $slot $drive"
#
# enable the following line if you need to eject the cartridge
# mt -f $device offline
+# sleep 10
${MTX} -f $ctl unload $slot $drive
;;
load)
-# echo "Doing mtx -f $ctl load $slot $drive"
+ debug "Doing mtx -f $ctl load $slot $drive"
${MTX} -f $ctl load $slot $drive
rtn=$?
#
# Increase the sleep time if you have a slow device
# or remove the sleep and add the following:
-# wait_for_drive $device
- sleep 15
+# sleep 15
+ wait_for_drive $device
exit $rtn
;;
list)
-# echo "Doing mtx -f $ctl -- to list volumes"
+ debug "Doing mtx -f $ctl -- to list volumes"
make_temp_file
+# Enable the following if you are using barcodes and need an inventory
+# ${MTX} -f $ctl inventory
${MTX} -f $ctl status >${TMPFILE}
rtn=$?
- cat ${TMPFILE} | grep " *Storage Element [0-9]*:.*Full" | awk "{print \$3 \$4}" | sed "s/Full *\(:VolumeTag=\)*//"
- cat ${TMPFILE} | grep "^Data Transfer Element [0-9]*:Full (Storage Element [0-9]" | awk '{printf "%s:%s\n",$7,$10}'
- rm -f ${TMPFILE} 2>&1 >/dev/null
+ cat ${TMPFILE} | grep " Storage Element [0-9]*:.*Full" | awk "{print \$3 \$4}" | sed "s/Full *\(:VolumeTag=\)*//"
#
# If you have a VXA PacketLoader and the above does not work, try
# turning it off and enabling the following line.
-# ${MTX} -f $ctl status | grep " *Storage Element [0-9]*:.*Full" | sed "s/*Storage Element //" | sed "s/Full :VolumeTag=//"
+# cat ${TMPFILE} | grep " *Storage Element [0-9]*:.*Full" | sed "s/ Storage Element //" | sed "s/Full :VolumeTag=//"
+#
+ cat ${TMPFILE} | grep "^Data Transfer Element [0-9]*:Full (Storage Element [0-9]" | awk '{printf "%s:%s\n",$7,$10}'
+ rm -f ${TMPFILE} >/dev/null 2>&1
exit $rtn
;;
loaded)
-# echo "Doing mtx -f $ctl $drive -- to find what is loaded"
+ debug "Doing mtx -f $ctl $drive -- to find what is loaded"
make_temp_file
${MTX} -f $ctl status >${TMPFILE}
rtn=$?
cat ${TMPFILE} | grep "^Data Transfer Element $drive:Full" | awk "{print \$7}"
cat ${TMPFILE} | grep "^Data Transfer Element $drive:Empty" | awk "{print 0}"
- rm -f ${TMPFILE} 2>&1 >/dev/null
+ rm -f ${TMPFILE} >/dev/null 2>&1
exit $rtn
;;
slots)
-# echo "Doing mtx -f $ctl -- to get count of slots"
+ debug "Doing mtx -f $ctl -- to get count of slots"
${MTX} -f $ctl status | grep " *Storage Changer" | awk "{print \$5}"
;;
esac