* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
-/* Prototypes */
-int gunzip(void *, int, unsigned char *, unsigned long *);
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
/* predefine these here for FPGA programming (before including fpga.c) */
#define SET_FPGA(data) *IXP425_GPIO_GPOUTR = (data)
-#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_DONE)
-#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_INIT)
+#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_DONE)
+#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_INIT)
#define OLD_VAL old_val
static unsigned long old_val = 0;
/*
* Miscelaneous platform dependent initialisations
*/
-int board_post_init(void)
-{
- return (0);
-}
-
int board_init(void)
{
- /* arch number of PDNB3 */
- gd->bd->bi_arch_number = MACH_TYPE_PDNB3;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
- GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_FPGA_RESET);
+ GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_FPGA_RESET);
- GPIO_OUTPUT_SET(CFG_GPIO_SYS_RUNNING);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_SYS_RUNNING);
+ GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SYS_RUNNING);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SYS_RUNNING);
/*
* Setup GPIO's for FPGA programming
*/
- GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
- GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
- GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_PRG);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_DATA);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_INIT);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_DONE);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PRG);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DATA);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_INIT);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DONE);
/*
* Setup GPIO's for interrupts
*/
- GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTORE_INT);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTORE_INT);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTART_INT);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTART_INT);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTORE_INT);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTORE_INT);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTART_INT);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTART_INT);
/*
* Setup GPIO's for 33MHz clock output
*/
*IXP425_GPIO_GPCLKR = 0x01FF0000;
- GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK_33M);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK_33M);
/*
* Setup other chip select's
*/
- *IXP425_EXP_CS1 = CFG_EXP_CS1;
+ *IXP425_EXP_CS1 = CONFIG_SYS_EXP_CS1;
return 0;
}
*/
int checkboard(void)
{
- char *s = getenv("serial#");
+ char buf[64];
+ int i = getenv_f("serial#", buf, sizeof(buf));
puts("Board: PDNB3");
- if (s != NULL) {
+ if (i > 0) {
puts(", serial# ");
- puts(s);
+ puts(buf);
}
putc('\n');
int status;
int index;
int i;
- ulong len = CFG_MALLOC_LEN;
+ ulong len = CONFIG_SYS_MALLOC_LEN;
/*
* Setup GPIO's for FPGA programming
*/
- GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
- GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
- GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
/*
* Save value so no readback is required upon programming
/*
* First try to decompress fpga image (gzip compressed?)
*/
- dst = malloc(CFG_FPGA_MAX_SIZE);
- if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+ if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf("Error: Image has to be gzipp'ed!\n");
return -1;
}
/*
* Reset FPGA
*/
- GPIO_OUTPUT_CLEAR(CFG_GPIO_FPGA_RESET);
+ GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_FPGA_RESET);
udelay(10);
- GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
+ GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
return (0);
}
-int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
- if (argc < 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc < 2)
+ return cmd_usage(cmdtp);
addr = simple_strtoul(argv[1], NULL, 16);
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
- "fpga - boot FPGA\n",
- "address size\n - boot FPGA with gzipped image at <address>\n"
+ "boot FPGA",
+ "address size\n - boot FPGA with gzipped image at <address>"
);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)