ac_default_prefix=/usr/local
ac_help="$ac_help
--enable-debug enable debugging (yes)"
+ac_help="$ac_help
+ --enable-proctitle enable proctitle support (yes)"
ac_help="$ac_help
--enable-libui enable library user interface (yes)"
ac_help="$ac_help
--enable-cache enable caching (yes)"
ac_help="$ac_help
- --enable-dns enable dns support (no)"
+ --enable-dns enable dns support (no)"
ac_help="$ac_help
--enable-referrals enable referrals (yes)"
ac_help="$ac_help
--enable-cldap enable connectionless ldap (no)"
+ac_help="$ac_help
+ --enable-x-compile enable cross compiling (no)"
ac_help="$ac_help
--with-kerberos use Kerberos (auto)"
ac_help="$ac_help
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
echo $ac_n "checking configure arguments""... $ac_c" 1>&6
-echo "configure:591: checking configure arguments" >&5
+echo "configure:595: checking configure arguments" >&5
# OpenLDAP --enable-debug
ol_enable_debug="yes"
fi
# end --enable-debug
+# OpenLDAP --enable-proctitle
+ # Check whether --enable-proctitle or --disable-proctitle was given.
+if test "${enable_proctitle+set}" = set; then
+ enableval="$enable_proctitle"
+
+ ol_arg=invalid
+ for ol_val in auto yes no ; do
+ if test "$enableval" = "$ol_val" ; then
+ ol_arg="$ol_val"
+ fi
+ done
+ if test "$ol_arg" = "invalid" ; then
+ { echo "configure: error: bad value $enableval for --enable-proctitle" 1>&2; exit 1; }
+ fi
+ ol_enable_proctitle="$ol_arg"
+
+else
+ ol_enable_proctitle="yes"
+fi
+# end --enable-proctitle
# OpenLDAP --enable-libui
# Check whether --enable-libui or --disable-libui was given.
if test "${enable_libui+set}" = set; then
ol_enable_cldap="no"
fi
# end --enable-cldap
+# OpenLDAP --enable-x_compile
+ # Check whether --enable-x_compile or --disable-x_compile was given.
+if test "${enable_x_compile+set}" = set; then
+ enableval="$enable_x_compile"
+
+ ol_arg=invalid
+ for ol_val in yes no ; do
+ if test "$enableval" = "$ol_val" ; then
+ ol_arg="$ol_val"
+ fi
+ done
+ if test "$ol_arg" = "invalid" ; then
+ { echo "configure: error: bad value $enableval for --enable-x_compile" 1>&2; exit 1; }
+ fi
+ ol_enable_x_compile="$ol_arg"
+
+else
+ ol_enable_x_compile="no"
+fi
+# end --enable-x_compile
# OpenLDAP --with-kerberos
# Check whether --with-kerberos or --without-kerberos was given.
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1203: checking whether ln -s works" >&5
+echo "configure:1247: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1234: checking for a BSD compatible install" >&5
+echo "configure:1278: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1286: checking for $ac_word" >&5
+echo "configure:1330: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1313: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1357: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "sendmail", so it can be a program name with args.
set dummy sendmail; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1343: checking for $ac_word" >&5
+echo "configure:1387: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SENDMAIL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "vi", so it can be a program name with args.
set dummy vi; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1375: checking for $ac_word" >&5
+echo "configure:1419: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_EDITOR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "finger", so it can be a program name with args.
set dummy finger; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1407: checking for $ac_word" >&5
+echo "configure:1451: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FINGER'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1440: checking for $ac_word" >&5
+echo "configure:1484: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1469: checking for $ac_word" >&5
+echo "configure:1513: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1517: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1561: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 1527 "configure"
+#line 1571 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1551: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1595: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1556: checking whether we are using GNU C" >&5
+echo "configure:1600: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1565: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1580: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1624: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
+
+if test $cross_compiling = yes -a $ol_enable_x_compile = yes; then
+ echo "configure: warning: cross compiling.... go for it" 1>&2
+
+elif test $cross_compiling = no -a $ol_enable_x_compile = yes; then
+ echo "configure: warning: programs compiled here do run here..." 1>&2
+ { echo "configure: error: if not cross compiling, use --disable-x-compile." 1>&2; exit 1; }
+
+elif test $cross_compiling = yes -a $ol_enable_x_compile = no; then
+ echo "configure: warning: programs compiled here do not run here..." 1>&2
+ { echo "configure: error: if cross compiling, add --enable-x-compile." 1>&2; exit 1; }
+fi
+
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1608: checking how to run the C preprocessor" >&5
+echo "configure:1665: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1623 "configure"
+#line 1680 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1629: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1686: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1640 "configure"
+#line 1697 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1703: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:1670: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:1727: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 1676 "configure"
+#line 1733 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 1694 "configure"
+#line 1751 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
fi
fi
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1773: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1788 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1794: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1805 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+
echo $ac_n "checking for AIX""... $ac_c" 1>&6
-echo "configure:1717: checking for AIX" >&5
+echo "configure:1836: checking for AIX" >&5
cat > conftest.$ac_ext <<EOF
-#line 1719 "configure"
+#line 1838 "configure"
#include "confdefs.h"
#ifdef _AIX
yes
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1741: checking for POSIXized ISC" >&5
+echo "configure:1860: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
-echo "configure:1763: checking for minix/config.h" >&5
+echo "configure:1882: checking for minix/config.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1768 "configure"
+#line 1887 "configure"
#include "confdefs.h"
#include <minix/config.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1773: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:1814: checking for socket" >&5
+echo "configure:1933: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1819 "configure"
+#line 1938 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:1842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:1861: checking for main in -lsocket" >&5
+echo "configure:1980: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1869 "configure"
+#line 1988 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnet""... $ac_c" 1>&6
-echo "configure:1904: checking for main in -lnet" >&5
+echo "configure:2023: checking for main in -lnet" >&5
ac_lib_var=`echo net'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1912 "configure"
+#line 2031 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnsl_s""... $ac_c" 1>&6
-echo "configure:1947: checking for main in -lnsl_s" >&5
+echo "configure:2066: checking for main in -lnsl_s" >&5
ac_lib_var=`echo nsl_s'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl_s $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1955 "configure"
+#line 2074 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:1990: checking for main in -lnsl" >&5
+echo "configure:2109: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1998 "configure"
+#line 2117 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for socket in -linet""... $ac_c" 1>&6
-echo "configure:2033: checking for socket in -linet" >&5
+echo "configure:2152: checking for socket in -linet" >&5
ac_lib_var=`echo inet'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-linet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2041 "configure"
+#line 2160 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:2052: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lgen""... $ac_c" 1>&6
-echo "configure:2080: checking for main in -lgen" >&5
+echo "configure:2199: checking for main in -lgen" >&5
ac_lib_var=`echo gen'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2088 "configure"
+#line 2207 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for sigset in -lV3""... $ac_c" 1>&6
-echo "configure:2127: checking for sigset in -lV3" >&5
+echo "configure:2246: checking for sigset in -lV3" >&5
ac_lib_var=`echo V3'_'sigset | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lV3 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2135 "configure"
+#line 2254 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sigset()
; return 0; }
EOF
-if { (eval echo configure:2146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2179: checking for $ac_hdr" >&5
+echo "configure:2298: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2184 "configure"
+#line 2303 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2189: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_kerberosIV_krb_h = yes ; then
echo $ac_n "checking for main in -lkrb4""... $ac_c" 1>&6
-echo "configure:2218: checking for main in -lkrb4" >&5
+echo "configure:2337: checking for main in -lkrb4" >&5
ac_lib_var=`echo krb4'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb4 -lkrb5 -ldes425 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2226 "configure"
+#line 2345 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2273: checking for $ac_hdr" >&5
+echo "configure:2392: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2278 "configure"
+#line 2397 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_krb_h = yes ; then
echo $ac_n "checking for main in -lkrb""... $ac_c" 1>&6
-echo "configure:2312: checking for main in -lkrb" >&5
+echo "configure:2431: checking for main in -lkrb" >&5
ac_lib_var=`echo krb'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb -ldes $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2320 "configure"
+#line 2439 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2370: checking for $ac_hdr" >&5
+echo "configure:2489: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2375 "configure"
+#line 2494 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2380: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_pthread_h = yes ; then
echo $ac_n "checking POSIX thread version""... $ac_c" 1>&6
-echo "configure:2409: checking POSIX thread version" >&5
+echo "configure:2528: checking POSIX thread version" >&5
if eval "test \"`echo '$''{'ol_cv_pthread_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2415 "configure"
+#line 2534 "configure"
#include "confdefs.h"
# include <pthread.h>
cat > conftest.$ac_ext <<EOF
-#line 2437 "configure"
+#line 2556 "configure"
#include "confdefs.h"
# include <pthread.h>
echo $ac_n "checking for LinuxThreads""... $ac_c" 1>&6
-echo "configure:2490: checking for LinuxThreads" >&5
+echo "configure:2609: checking for LinuxThreads" >&5
if eval "test \"`echo '$''{'ol_cv_linux_threads'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for pthread_create""... $ac_c" 1>&6
-echo "configure:2516: checking for pthread_create" >&5
+echo "configure:2635: checking for pthread_create" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_create'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2640 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_create(); below. */
; return 0; }
EOF
-if { (eval echo configure:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_pthread_create=yes"
else
if test $ol_link_threads = no ; then
echo $ac_n "checking for pthread_create with -pthread""... $ac_c" 1>&6
-echo "configure:2566: checking for pthread_create with -pthread" >&5
+echo "configure:2685: checking for pthread_create with -pthread" >&5
if eval "test \"`echo '$''{'ol_cv_pthread_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_LIBS="$LIBS"
LIBS="-pthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2574 "configure"
+#line 2693 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:2584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ol_cv_pthread_flag=yes
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2609: checking for pthread_create in -lpthread" >&5
+echo "configure:2728: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2617 "configure"
+#line 2736 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:2656: checking for pthread_create in -lc_r" >&5
+echo "configure:2775: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2664 "configure"
+#line 2783 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_threads = no ; then
save_LIBS="$LIBS"
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2703: checking for pthread_create in -lpthread" >&5
+echo "configure:2822: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lpthread if test $ol_with_preemptive = auto ; then
- ol_with_preemptive=yes
- fi
- -lmach -lexc -lc $LIBS"
+LIBS="-lpthread -lmach -lexc -lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2714 "configure"
+#line 2830 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ol_link_threads=posix
LTHREAD_LIBS="$LTHREAD_LIBS -lpthread -lmach -lexc -lc"
+ if test $ol_with_preemptive = auto ; then
+ ol_with_preemptive=yes
+ fi
+
else
echo "$ac_t""no" 1>&6
fi
for ac_func in sched_yield pthread_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2767: checking for $ac_func" >&5
+echo "configure:2887: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2772 "configure"
+#line 2892 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_func_sched_yield = no -a \
$ac_cv_func_pthread_yield = no ; then
+ echo $ac_n "checking for sched_yield in -lrt""... $ac_c" 1>&6
+echo "configure:2943: checking for sched_yield in -lrt" >&5
+ac_lib_var=`echo rt'_'sched_yield | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lrt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2951 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char sched_yield();
+
+int main() {
+sched_yield()
+; return 0; }
+EOF
+if { (eval echo configure:2962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LTHREAD_LIBS="$LTHREAD_LIBS -lrt"
+ cat >> confdefs.h <<\EOF
+#define HAVE_SCHED_YIELD 1
+EOF
+
+ ac_cv_func_sched_yield=yes
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_func_sched_yield=no
+fi
+
+ fi
+ if test $ac_cv_func_sched_yield = no -a \
+ $ac_cv_func_pthread_yield = no ; then
+ echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
+echo "configure:2992: checking for sched_yield in -lposix4" >&5
+ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lposix4 $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3000 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char sched_yield();
+
+int main() {
+sched_yield()
+; return 0; }
+EOF
+if { (eval echo configure:3011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LTHREAD_LIBS="$LTHREAD_LIBS -lposix4"
+ cat >> confdefs.h <<\EOF
+#define HAVE_SCHED_YIELD 1
+EOF
+
+ ac_cv_func_sched_yield=yes
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_func_sched_yield=no
+fi
+
+ fi
+ if test $ac_cv_func_sched_yield = no -a \
+ $ac_cv_func_pthread_yield = no ; then
echo "configure: warning: could not locate sched_yield() or pthread_yield()" 1>&2
{ echo "configure: error: POSIX Threads are not usable" 1>&2; exit 1; }
fi
for ac_func in pthread_kill
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2830: checking for $ac_func" >&5
+echo "configure:3047: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2835 "configure"
+#line 3052 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ for ac_func in \
+ pthread_setconcurrency \
+ thr_setconcurrency \
+
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3106: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3111 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ol_with_preemptive = auto ; then
echo $ac_n "checking for preemptive Pthread implementation""... $ac_c" 1>&6
-echo "configure:2885: checking for preemptive Pthread implementation" >&5
+echo "configure:3161: checking for preemptive Pthread implementation" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: crossing compiling: use --with-preemptive=yes|no|manual" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2891 "configure"
+#line 3167 "configure"
#include "confdefs.h"
#include <sys/types.h>
int argc; char **argv;
{
pthread_t t;
+
+#ifdef HAVE_PTHREAD_SETCONCURRENCY
+ (void) pthread_setconcurrency(2);
+#elif HAVE_THR_SETCONCURRENCY
+ /* Set Solaris LWP concurrency to 2 */
+ thr_setconcurrency(2);
+#endif
+
pthread_create(&t, NULL, (void *) task, NULL);
#if HAVE_SCHED_YIELD
}
EOF
-if { (eval echo configure:2935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ol_pthread_preemptive=yes
else
fi
fi
+ for ac_func in \
+ feof_unlocked \
+ unlocked_feof \
+ ftrylockfile \
+ flockfile \
+ putc_unlocked \
+ gmtime_r \
+ strtok_r \
+
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3253: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3258 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
CPPFLAGS="$save_CPPFLAGS"
LIBS="$save_LIBS"
else
fi
fi
-if test $ol_with_threads = auto -o $ol_with_threads = cthreads ; then
+if test $ol_with_threads = auto -o $ol_with_threads = mach ; then
for ac_hdr in mach/cthreads.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2975: checking for $ac_hdr" >&5
+echo "configure:3323: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2980 "configure"
+#line 3328 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2985: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3333: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
- if test $ac_cv_header_lwp_lwp_h = yes ; then
- echo $ac_n "checking for cthread_fork in -llwp""... $ac_c" 1>&6
-echo "configure:3013: checking for cthread_fork in -llwp" >&5
-ac_lib_var=`echo lwp'_'cthread_fork | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ if test $ac_cv_header_mach_cthreads_h = yes ; then
+ ol_with_threads=found
+
+ echo $ac_n "checking for cthread_fork""... $ac_c" 1>&6
+echo "configure:3363: checking for cthread_fork" >&5
+if eval "test \"`echo '$''{'ac_cv_func_cthread_fork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-llwp $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3021 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 3368 "configure"
#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char cthread_fork(); below. */
+#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char cthread_fork();
int main() {
-cthread_fork()
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_cthread_fork) || defined (__stub___cthread_fork)
+choke me
+#else
+cthread_fork();
+#endif
+
; return 0; }
EOF
-if { (eval echo configure:3032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ eval "ac_cv_func_cthread_fork=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ eval "ac_cv_func_cthread_fork=no"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+
+if eval "test \"`echo '$ac_cv_func_'cthread_fork`\" = yes"; then
echo "$ac_t""yes" 1>&6
- have_cthreads=yes
+ ol_link_threads=yes
else
echo "$ac_t""no" 1>&6
-have_cthreads=no
fi
- if test $have_cthreads = yes ; then
- cat >> confdefs.h <<\EOF
-#define HAVE_MACH_CTHREADS 1
+ if test $ol_link_threads = no ; then
+ echo $ac_n "checking for cthread_fork with -all_load""... $ac_c" 1>&6
+echo "configure:3413: checking for cthread_fork with -all_load" >&5
+if eval "test \"`echo '$''{'ol_cv_cthread_all_load'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ save_LIBS="$LIBS"
+ LIBS="-all_load $LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 3421 "configure"
+#include "confdefs.h"
+#include <mach/cthreads.h>
+int main() {
+
+ cthread_fork((void *)0, (void *)0);
+
+; return 0; }
EOF
+if { (eval echo configure:3430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ ol_cv_cthread_all_load=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ol_cv_cthread_all_load=no
+fi
+rm -f conftest*
+ LIBS="$save_LIBS"
+
+fi
- LTHREAD_LIBS="$LTHREAD_LIBS -llwp"
+echo "$ac_t""$ol_cv_cthread_all_load" 1>&6
+
+ if test $ol_cv_cthread_all_load = yes ; then
+ LTHREAD_LIBS="$LTHREAD_LIBS -all_load"
+ ol_link_threads=mach
+ fi
+ fi
+
+ if test $ol_link_threads != no ; then
+ : check for cthread specific functionality here
+ else
+ { echo "configure: error: could not link with Mach CThreads" 1>&2; exit 1; }
fi
fi
+
+ if test $ol_with_threads = mach ; then
+ { echo "configure: error: could not locate Mach CThreads" 1>&2; exit 1; }
+ fi
fi
if test $ol_with_threads = auto -o $ol_with_threads = lwp ; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3069: checking for $ac_hdr" >&5
+echo "configure:3469: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3074 "configure"
+#line 3474 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3479: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
- if test $ac_cv_header_lwp_lwp_h = yes ; then
+ if test $ac_cv_header_thread_h = yes -a $ac_cv_header_synch_h = yes ; then
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3107: checking for thr_create in -lthread" >&5
+echo "configure:3507: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3115 "configure"
+#line 3515 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
thr_create()
; return 0; }
EOF
-if { (eval echo configure:3126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3165: checking for $ac_hdr" >&5
+echo "configure:3565: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3170 "configure"
+#line 3570 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3575: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
- if test $ac_cv_header_thread_h = yes -a $ac_cv_header_synch_h = yes ; then
+ if test $ac_cv_header_lwp_lwp_h = yes ; then
echo $ac_n "checking for lwp_create in -llwp""... $ac_c" 1>&6
-echo "configure:3203: checking for lwp_create in -llwp" >&5
+echo "configure:3603: checking for lwp_create in -llwp" >&5
ac_lib_var=`echo lwp'_'lwp_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-llwp $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3211 "configure"
+#line 3611 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
lwp_create()
; return 0; }
EOF
-if { (eval echo configure:3222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test $ol_with_threads = manual ; then
- $ol_link_threads=yes
+ ol_link_threads=yes
echo "configure: warning: thread defines and link options must be set manually" 1>&2
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3274: checking for $ac_hdr" >&5
+echo "configure:3674: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3279 "configure"
+#line 3679 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3684: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in sched_yield pthread_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3313: checking for $ac_func" >&5
+echo "configure:3713: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3318 "configure"
+#line 3718 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for LinuxThreads""... $ac_c" 1>&6
-echo "configure:3367: checking for LinuxThreads" >&5
+echo "configure:3767: checking for LinuxThreads" >&5
if eval "test \"`echo '$''{'ol_cv_linux_threads'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3388: checking for $ac_hdr" >&5
+echo "configure:3788: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3393 "configure"
+#line 3793 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3398: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3798: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3428: checking for $ac_hdr" >&5
+echo "configure:3828: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3433 "configure"
+#line 3833 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3438: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3468: checking for $ac_hdr" >&5
+echo "configure:3868: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3473 "configure"
+#line 3873 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3478: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ol_with_threads = auto ; then
echo "configure: warning: no suitable thread support, disabling threads" 1>&2
- $ol_with_threads = no
+ ol_with_threads=no
fi
cat >> confdefs.h <<\EOF
ol_link_ldbm=no
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = db2 ; then
echo $ac_n "checking for DB2 library""... $ac_c" 1>&6
-echo "configure:3530: checking for DB2 library" >&5
+echo "configure:3930: checking for DB2 library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for db_open in -ldb""... $ac_c" 1>&6
-echo "configure:3536: checking for db_open in -ldb" >&5
+echo "configure:3936: checking for db_open in -ldb" >&5
ac_lib_var=`echo db'_'db_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3544 "configure"
+#line 3944 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
db_open()
; return 0; }
EOF
-if { (eval echo configure:3555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3586: checking for $ac_hdr" >&5
+echo "configure:3986: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3591 "configure"
+#line 3991 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3596: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3996: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_db_h = yes ; then
echo $ac_n "checking if db.h is DB2""... $ac_c" 1>&6
-echo "configure:3624: checking if db.h is DB2" >&5
+echo "configure:4024: checking if db.h is DB2" >&5
if eval "test \"`echo '$''{'ol_cv_header_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3630 "configure"
+#line 4030 "configure"
#include "confdefs.h"
# include <db.h>
echo $ac_n "checking for Berkeley DB2""... $ac_c" 1>&6
-echo "configure:3662: checking for Berkeley DB2" >&5
+echo "configure:4062: checking for Berkeley DB2" >&5
if eval "test \"`echo '$''{'ol_cv_berkeley_db2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = db ; then
echo $ac_n "checking for Berkeley DB library""... $ac_c" 1>&6
-echo "configure:3708: checking for Berkeley DB library" >&5
+echo "configure:4108: checking for Berkeley DB library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_db'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:3714: checking for dbopen" >&5
+echo "configure:4114: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3719 "configure"
+#line 4119 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */
; return 0; }
EOF
-if { (eval echo configure:3742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_dbopen=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
-echo "configure:3761: checking for dbopen in -ldb" >&5
+echo "configure:4161: checking for dbopen in -ldb" >&5
ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3769 "configure"
+#line 4169 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbopen()
; return 0; }
EOF
-if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3815: checking for $ac_hdr" >&5
+echo "configure:4215: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3820 "configure"
+#line 4220 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for Berkeley DB""... $ac_c" 1>&6
-echo "configure:3861: checking for Berkeley DB" >&5
+echo "configure:4261: checking for Berkeley DB" >&5
if eval "test \"`echo '$''{'ol_cv_berkeley_db'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
if test $ol_with_ldbm_api = manual ; then
- $ol_link_ldbm=yes
+ ol_link_ldbm=yes
echo "configure: warning: LDBM defines and link options must be set manually" 1>&2
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3914: checking for $ac_hdr" >&5
+echo "configure:4314: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3919 "configure"
+#line 4319 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3924: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ol_link_ldbm = no -a $ol_with_ldbm_type = btree ; then
echo "configure: warning: Could not find LDBM with BTREE support" 1>&2
- $ol_with_ldbm_api=none
+ ol_with_ldbm_api=none
fi
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = gdbm ; then
echo $ac_n "checking for GDBM library""... $ac_c" 1>&6
-echo "configure:3959: checking for GDBM library" >&5
+echo "configure:4359: checking for GDBM library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_gdbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for gdbm_open""... $ac_c" 1>&6
-echo "configure:3965: checking for gdbm_open" >&5
+echo "configure:4365: checking for gdbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_gdbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3970 "configure"
+#line 4370 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gdbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:3993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gdbm_open=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gdbm_open in -lgdbm""... $ac_c" 1>&6
-echo "configure:4012: checking for gdbm_open in -lgdbm" >&5
+echo "configure:4412: checking for gdbm_open in -lgdbm" >&5
ac_lib_var=`echo gdbm'_'gdbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4020 "configure"
+#line 4420 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdbm_open()
; return 0; }
EOF
-if { (eval echo configure:4031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4066: checking for $ac_hdr" >&5
+echo "configure:4466: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4071 "configure"
+#line 4471 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4076: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4476: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for db""... $ac_c" 1>&6
-echo "configure:4103: checking for db" >&5
+echo "configure:4503: checking for db" >&5
if eval "test \"`echo '$''{'ol_cv_gdbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test $ol_with_ldbm_api = auto -o $ol_with_ldbm_api = ndbm ; then
echo $ac_n "checking for NDBM library""... $ac_c" 1>&6
-echo "configure:4137: checking for NDBM library" >&5
+echo "configure:4537: checking for NDBM library" >&5
if eval "test \"`echo '$''{'ol_cv_lib_ndbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_LIBS="$LIBS"
echo $ac_n "checking for dbm_open""... $ac_c" 1>&6
-echo "configure:4143: checking for dbm_open" >&5
+echo "configure:4543: checking for dbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4148 "configure"
+#line 4548 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:4171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_dbm_open=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -lndbm""... $ac_c" 1>&6
-echo "configure:4190: checking for dbm_open in -lndbm" >&5
+echo "configure:4590: checking for dbm_open in -lndbm" >&5
ac_lib_var=`echo ndbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lndbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4198 "configure"
+#line 4598 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:4209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -ldbm""... $ac_c" 1>&6
-echo "configure:4229: checking for dbm_open in -ldbm" >&5
+echo "configure:4629: checking for dbm_open in -ldbm" >&5
ac_lib_var=`echo dbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4237 "configure"
+#line 4637 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:4248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4285: checking for $ac_hdr" >&5
+echo "configure:4685: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4290 "configure"
+#line 4690 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4295: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for db""... $ac_c" 1>&6
-echo "configure:4322: checking for db" >&5
+echo "configure:4722: checking for db" >&5
if eval "test \"`echo '$''{'ol_cv_ndbm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "configure: warning: disabling LDBM" 1>&2
- $ol_enable_ldbm=no
+ ol_enable_ldbm=no
fi
if test $ol_enable_wrappers = yes ; then
echo $ac_n "checking for hosts_access in -lwrap""... $ac_c" 1>&6
-echo "configure:4370: checking for hosts_access in -lwrap" >&5
+echo "configure:4770: checking for hosts_access in -lwrap" >&5
ac_lib_var=`echo wrap'_'hosts_access | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lwrap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4378 "configure"
+#line 4778 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
hosts_access()
; return 0; }
EOF
-if { (eval echo configure:4389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4435: checking for $ac_hdr" >&5
+echo "configure:4835: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4440 "configure"
+#line 4840 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4445: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ol_link_termcap = no ; then
echo $ac_n "checking for tputs in -ltermcap""... $ac_c" 1>&6
-echo "configure:4474: checking for tputs in -ltermcap" >&5
+echo "configure:4874: checking for tputs in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tputs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4482 "configure"
+#line 4882 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tputs()
; return 0; }
EOF
-if { (eval echo configure:4493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ol_link_termcap = no ; then
echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
-echo "configure:4526: checking for initscr in -lncurses" >&5
+echo "configure:4926: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4534 "configure"
+#line 4934 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:4545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# FreeBSD (and others) have crypt(3) in -lcrypt
if test $ol_enable_crypt != no ; then
echo $ac_n "checking for crypt""... $ac_c" 1>&6
-echo "configure:4587: checking for crypt" >&5
+echo "configure:4987: checking for crypt" >&5
if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4592 "configure"
+#line 4992 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char crypt(); below. */
; return 0; }
EOF
-if { (eval echo configure:4615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_crypt=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:4634: checking for crypt in -lcrypt" >&5
+echo "configure:5034: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4642 "configure"
+#line 5042 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:4653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
fi
+# FreeBSD (and others) have setproctitle(3) in -lutil
+if test $ol_enable_proctitle != no ; then
+ echo $ac_n "checking for setproctitle""... $ac_c" 1>&6
+echo "configure:5097: checking for setproctitle" >&5
+if eval "test \"`echo '$''{'ac_cv_func_setproctitle'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5102 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char setproctitle(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char setproctitle();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_setproctitle) || defined (__stub___setproctitle)
+choke me
+#else
+setproctitle();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:5125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_setproctitle=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_setproctitle=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'setproctitle`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_setproctitle=yes
+else
+ echo "$ac_t""no" 1>&6
+
+ echo $ac_n "checking for setproctitle in -lutil""... $ac_c" 1>&6
+echo "configure:5144: checking for setproctitle in -lutil" >&5
+ac_lib_var=`echo util'_'setproctitle | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lutil $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5152 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char setproctitle();
+
+int main() {
+setproctitle()
+; return 0; }
+EOF
+if { (eval echo configure:5163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_setproctitle=yes
+ LUTIL_LIBS="$LUTIL_LIBS -lutil"
+else
+ echo "$ac_t""no" 1>&6
+have_setproctitle=no
+ LIBOBJS="$LIBOBJS setproctitle.o"
+fi
+
+fi
+
+
+ if test $have_setproctitle = yes ; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_SETPROCTITLE 1
+EOF
+
+ fi
+fi
+
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:4695: checking for ANSI C header files" >&5
+echo "configure:5198: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4700 "configure"
+#line 5203 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4708: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 4725 "configure"
+#line 5228 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 4743 "configure"
+#line 5246 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 4764 "configure"
+#line 5267 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:4775: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4808: checking for $ac_hdr that defines DIR" >&5
+echo "configure:5311: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4813 "configure"
+#line 5316 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4821: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5324: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4846: checking for opendir in -ldir" >&5
+echo "configure:5349: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4854 "configure"
+#line 5357 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4887: checking for opendir in -lx" >&5
+echo "configure:5390: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4895 "configure"
+#line 5398 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:4929: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:5432: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4934 "configure"
+#line 5437 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:4950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
for ac_hdr in \
+ stdarg.h \
stddef.h \
errno.h \
fcntl.h \
filio.h \
getopt.h \
+ libutil.h \
limits.h \
malloc.h \
regex.h \
sgtty.h \
sys/file.h \
+ sys/filio.h \
sys/errno.h \
sys/ioctl.h \
sys/param.h \
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4995: checking for $ac_hdr" >&5
+echo "configure:5501: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5000 "configure"
+#line 5506 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5511: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:5033: checking for uid_t in sys/types.h" >&5
+echo "configure:5539: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5038 "configure"
+#line 5544 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:5067: checking type of array argument to getgroups" >&5
+echo "configure:5573: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 5075 "configure"
+#line 5581 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:5100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 5114 "configure"
+#line 5620 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:5138: checking for mode_t" >&5
+echo "configure:5644: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5143 "configure"
+#line 5649 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5171: checking for off_t" >&5
+echo "configure:5677: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5176 "configure"
+#line 5682 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:5204: checking for pid_t" >&5
+echo "configure:5710: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5209 "configure"
+#line 5715 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:5237: checking return type of signal handlers" >&5
+echo "configure:5743: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5242 "configure"
+#line 5748 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:5259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5278: checking for size_t" >&5
+echo "configure:5784: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5283 "configure"
+#line 5789 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:5311: checking for uid_t in sys/types.h" >&5
+echo "configure:5817: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5316 "configure"
+#line 5822 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:5345: checking for st_blksize in struct stat" >&5
+echo "configure:5851: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5350 "configure"
+#line 5856 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:5358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5864: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:5379: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:5885: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5384 "configure"
+#line 5890 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:5393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:5414: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:5920: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5419 "configure"
+#line 5925 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:5427: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
echo $ac_n "checking if toupper() requires islower()""... $ac_c" 1>&6
-echo "configure:5450: checking if toupper() requires islower()" >&5
+echo "configure:5956: checking if toupper() requires islower()" >&5
if eval "test \"`echo '$''{'ol_cv_c_upper_lower'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ol_cv_c_upper_lower=safe
else
cat > conftest.$ac_ext <<EOF
-#line 5459 "configure"
+#line 5965 "configure"
#include "confdefs.h"
#include <ctype.h>
exit(1);
}
EOF
-if { (eval echo configure:5471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ol_cv_c_upper_lower=no
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5494: checking for working const" >&5
+echo "configure:6000: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5499 "configure"
+#line 6005 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:5548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6054: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:5571: checking for 8-bit clean memcmp" >&5
+echo "configure:6077: checking for 8-bit clean memcmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_memcmp_clean=no
else
cat > conftest.$ac_ext <<EOF
-#line 5579 "configure"
+#line 6085 "configure"
#include "confdefs.h"
main()
}
EOF
-if { (eval echo configure:5589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_memcmp_clean=yes
else
test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.o"
echo $ac_n "checking for strftime""... $ac_c" 1>&6
-echo "configure:5607: checking for strftime" >&5
+echo "configure:6113: checking for strftime" >&5
if eval "test \"`echo '$''{'ac_cv_func_strftime'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5612 "configure"
+#line 6118 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strftime(); below. */
; return 0; }
EOF
-if { (eval echo configure:5635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strftime=yes"
else
echo "$ac_t""no" 1>&6
# strftime is in -lintl on SCO UNIX.
echo $ac_n "checking for strftime in -lintl""... $ac_c" 1>&6
-echo "configure:5657: checking for strftime in -lintl" >&5
+echo "configure:6163: checking for strftime in -lintl" >&5
ac_lib_var=`echo intl'_'strftime | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5665 "configure"
+#line 6171 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strftime()
; return 0; }
EOF
-if { (eval echo configure:5676: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:5703: checking for vprintf" >&5
+echo "configure:6209: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5708 "configure"
+#line 6214 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:5731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:5755: checking for _doprnt" >&5
+echo "configure:6261: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5760 "configure"
+#line 6266 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:5783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
fi
+
+if test $ac_cv_func_vprintf = yes ; then
+ for ac_func in vsnprintf
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:6318: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6323 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:6346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+fi
+
echo $ac_n "checking for wait3 that fills in rusage""... $ac_c" 1>&6
-echo "configure:5808: checking for wait3 that fills in rusage" >&5
+echo "configure:6373: checking for wait3 that fills in rusage" >&5
if eval "test \"`echo '$''{'ac_cv_func_wait3_rusage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_wait3_rusage=no
else
cat > conftest.$ac_ext <<EOF
-#line 5816 "configure"
+#line 6381 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
}
}
EOF
-if { (eval echo configure:5847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_wait3_rusage=yes
else
setsid \
signal \
sigset \
+ snprintf \
socket \
strerror \
strstr \
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5901: checking for $ac_func" >&5
+echo "configure:6467: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5906 "configure"
+#line 6472 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getopt strdup tempnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5957: checking for $ac_func" >&5
+echo "configure:6523: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5962 "configure"
+#line 6528 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Check Configuration
echo $ac_n "checking declaration of sys_errlist""... $ac_c" 1>&6
-echo "configure:6015: checking declaration of sys_errlist" >&5
+echo "configure:6581: checking declaration of sys_errlist" >&5
if eval "test \"`echo '$''{'ol_cv_dcl_sys_errlist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6021 "configure"
+#line 6587 "configure"
#include "confdefs.h"
#include <stdio.h>
char *c = (char *) *sys_errlist
; return 0; }
EOF
-if { (eval echo configure:6031: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ol_cv_dcl_sys_errlist=yes
else
EOF
echo $ac_n "checking existence of sys_errlist""... $ac_c" 1>&6
-echo "configure:6052: checking existence of sys_errlist" >&5
+echo "configure:6618: checking existence of sys_errlist" >&5
if eval "test \"`echo '$''{'ol_cv_have_sys_errlist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6058 "configure"
+#line 6624 "configure"
#include "confdefs.h"
#include <errno.h>
int main() {
char *c = (char *) *sys_errlist
; return 0; }
EOF
-if { (eval echo configure:6065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:6631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ol_cv_have_sys_errlist=yes
else
#define LDAP_DNS 1
EOF
+fi
+if test $ol_enable_proctitle != no ; then
+ cat >> confdefs.h <<\EOF
+#define LDAP_PROCTITLE 1
+EOF
+
fi
if test $ol_enable_referrals != no ; then
cat >> confdefs.h <<\EOF
BUILD_SLURPD=yes
fi
+if test $ol_enable_ldapd != no ; then
+ BUILD_LDAPD=yes
+fi
+
EOF
cat >> $CONFIG_STATUS <<\EOF
+
date > stamp-h
+echo Please \"make depend\" to build dependencies
+
exit 0
EOF
chmod +x $CONFIG_STATUS
projects / openldap / blobdiff