# $OpenLDAP$
-# Copyright 1999-2000, The OpenLDAP Foundation, All Rights Reserved.
+# Copyright 1999-2003, The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+
H1: Building and Installing OpenLDAP Software
This chapter details how to build and install the {{ORG:OpenLDAP}}
-Software package including {{slapd}}(8), the stand-alone LDAP
-daemon and {{slurpd}}(8), the stand-alone update replication daemon.
-
-Building and installing OpenLDAP requires several steps: installing
-prerequisite software, configuring OpenLDAP itself, making, and finally
-installing. The following sections describe this process in detail.
-
-In case you haven't already obtained OpenLDAP it is available at the following
-location: {{URL: ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release.tgz}}
-
-The {{ORG[expand]OLP}} also maintains an extensive site
-({{URL:http://www.OpenLDAP.org/}}) on the World Wide Web. The site
-makes available a number of resources which you may utilize to
-properly install OpenLDAP Software. This includes:
-
-!block table; align=Center; coltags="N,URL"
-Resource URL
-Documentation Catalog http://www.OpenLDAP.org/doc/
-Frequently Asked Questions http://www.OpenLDAP.org/faq/
-Issue Tracking System http://www.OpenLDAP.org/its/
-Mailing Lists http://www.OpenLDAP.org/lists/
-Software Pages http://www.OpenLDAP.org/software/
-Support Page http://www.OpenLDAP.org/support/
-!endblock
-
+Software package including {{slapd}}(8), the stand-alone LDAP daemon
+and {{slurpd}}(8), the stand-alone update replication daemon.
+Building and installing OpenLDAP Software requires several steps:
+installing prerequisite software, configuring OpenLDAP Software
+itself, making, and finally installing. The following sections
+describe this process in detail.
+
+
+H2: Obtaining and Extracting the Software
+
+You can obtain OpenLDAP Software from the project's download
+page at {{URL: http://www.openldap.org/software/download/}} or
+directly from the project's {{TERM:FTP}} service at
+{{URL: ftp://ftp.openldap.org/pub/OpenLDAP/}}.
+
+The project makes available two series of packages for {{general
+use}}. The project makes {{releases}} as new features and bug fixes
+come available. Though the project takes steps to improve stablity
+of these releases, it is common for problems to arise only after
+{{release}}. The {{stable}} release is the latest {{release}} which
+has demonstrated stability through general use.
+
+Users of OpenLDAP Software can choose, depending on their desire
+for the {{latest features}} versus {{demonstrated stability}}, the
+most appropriate series to install.
+
+After downloading OpenLDAP Software, you need to extract the
+distribution from the compressed archive file and change your working
+directory to the top directory of the distribution:
+
+.{{EX:gunzip -c openldap-VERSION.tgz | tar xf -}}
+.{{EX:cd openldap-VERSION}}
+
+You'll have to replace {{EX:VERSION}} with the version name of
+the release.
+
+You should now review the {{F:COPYRIGHT}}, {{F:LICENSE}}, {{F:README}}
+and {{F:INSTALL}} documents provided with the distribution. The
+{{F:COPYRIGHT}} and {{F:LICENSE}} provide information on acceptable
+use, copying, and limitation of warranty of OpenLDAP Software. The
+{{F:README}} and {{F:INSTALL}} documents provide detailed information
+on prerequisite software and installation procedures.
+
+
H2: Prerequisite software
-OpenLDAP relies a number of software packages distributed by third
-parties. Depending on the features you intend to use, you may have
-to download and install a number of additional software packages.
-This section details commonly needed third party software packages
-you might have to install. Note that some of these third party
-packages may depend on additional software packages. Install each
-package per installation instructions provided with it.
+OpenLDAP Software relies upon a number of software packages distributed
+by third parties. Depending on the features you intend to use,
+you may have to download and install a number of additional
+software packages. This section details commonly needed third party
+software packages you might have to install. Note that some of
+these third party packages may depend on additional software
+packages. Install each package per the installation instructions
+provided with it.
+
H3: {{TERM[expand]TLS}}
OpenSSL is available from {{URL: http://www.openssl.org/}}.
-OpenLDAP will not be fully LDAPv3 compliant unless OpenLDAP's
+OpenLDAP Software will not be fully LDAPv3 compliant unless OpenLDAP's
{{EX:configure}} detects a usable OpenSSL installation.
+
H3: Kerberos Authentication Services
-OpenLDAP clients and servers support Kerberos based authentication
+OpenLDAP clients and servers support Kerberos-based authentication
services.
-In particular, OpenLDAP supports {{TERM:SASL}}/{{TERM:GSSAPI}} based
-authentication using either {{PRD:Heimdal}} or {{PRD:MIT Kerberos}}
-V packages.
-If you desire to use Kerberos based authentication, you should
-install either Heimdal or MIT Kerberos V.
+In particular, OpenLDAP supports the {{TERM:SASL}}/{{TERM:GSSAPI}}
+authentication mechanism using either {{PRD:Heimdal}} or
+{{PRD:MIT Kerberos}} V packages.
+If you desire to use Kerberos-based SASL/GSSAPI authentication,
+you should install either Heimdal or MIT Kerberos V.
Heimdal Kerberos is available from {{URL:http://www.pdc.kth.se/heimdal/}}.
MIT Kerberos is available from {{URL:http://web.mit.edu/kerberos/www/}}.
Use of strong authentication services, such as those provided by
Kerberos, is highly recommended.
+
H3: {{TERM[expand]SASL}}
-OpenLDAP clients and servers require installation of {{PRD:Cyrus}}
-SASL libraries to provide {{TERM[expand]SASL}} services. Though
+OpenLDAP clients and servers require installation of {{PRD:Cyrus}}'s
+{{PRD:SASL}} libraries to provide {{TERM[expand]SASL}} services. Though
some operating systems may provide this library as part of the
base system or as an optional software component, Cyrus SASL
often requires separate installation.
-Cyrus SASL is available from {{URL:http://asg.cmu.edu/cyrus/sasl/}}.
+Cyrus SASL is available from
+{{URL:http://asg.web.cmu.edu/sasl/sasl-library.html}}.
Cyrus SASL will make use of OpenSSL and Kerberos/GSSAPI libraries
if preinstalled.
-OpenLDAP will not be fully LDAPv3 compliant unless OpenLDAP's
+OpenLDAP Software will not be fully LDAPv3 compliant unless OpenLDAP's
configure detects a usable Cyrus SASL installation.
-H3: Database software
-OpenLDAP's {{slapd}}(8) primary database backend, {{TERM:LDBM}},
-requires that a compatible database package for entry storage. LDBM
-is compatible with {{ORG[expand]Sleepy}}'s {{PRD:BerkeleyDB}} (recommended)
-or the {{ORG[expand]FSF}}'s {{PRD:GNU}} Database Manager ({{PRD:GDBM}}).
-If neither of these packages are available at configure time,
-you will not be able build slapd(8) with primary database backend.
+H3: Database Software
+
+OpenLDAP's {{slapd}}(8) primary database backend, {{TERM:BDB}},
+requires {{ORG[expand]Sleepycat}} {{PRD:Berkeley DB}}, version 4.
+If not available at configure time, you will not be able build
+{{slapd}}(8) with this primary database backend.
-Your operating system may provide one of these two packages in
-in base system or as an optional software component. You may
-need may need to obtain the software and install it yourself.
+Your operating system may provide {{PRD:Berkeley DB}}, version 4,
+in the base system or as an optional software component. If not,
+you'll have to obtain and install it yourself.
-{{PRD:BerkeleyDB}} is available from {{ORG[expand]Sleepy}}'s
+{{PRD:Berkeley DB}} is available from {{ORG[expand]Sleepycat}}'s
download page {{URL: http://www.sleepycat.com/download.html}}.
There are several versions available. At the time of this writing,
-the latest release, version 3.1, is recommended.
+the latest release, version 4.1, is recommended. This package is
+required if you wish to use the {{TERM:BDB}} database backend.
+
+OpenLDAP's {{slapd}}(8) LDBM backend supports a variety of data
+base managers including {{PRD:Berkeley DB}} and {{PRD:GDBM}}.
+{{PRD:GDBM}} is available from {{ORG:FSF}}'s download site {{URL:
+ftp://ftp.gnu.org/pub/gnu/gdbm/}}.
-{{PRD:GDBM}} is available from {{ORG:FSF}}'s download site
-{{URL: ftp://ftp.gnu.org/pub/gnu/gdbm/}}.
-At the time of this writing, version 1.8 is the latest release.
H3: Threads
consult the {{F:Software|Installation|Platform Hints}} section
of the OpenLDAP FAQ {{URL: http://www.openldap.org/faq/}}.
+
H3: TCP Wrappers
-{{slapd}}(8) supports TCP wrappers (IP level access control filters)
-if preinstalled. Use of TCP wrappers or other IP level access
-filters (such as those provided by IP firewall) is recommended
+{{slapd}}(8) supports TCP Wrappers (IP level access control filters)
+if preinstalled. Use of TCP Wrappers or other IP-level access
+filters (such as those provided by an IP-level firewall) is recommended
for servers containing non-public information.
-H2: Configuring OpenLDAP
-
-If you haven't already done so, extra the distribution for the
-compressed archive file and change directory to the top of the
-distribution:
-
-.{{EX:gunzip -c openldap-VERSION.tgz | tar xf -}}
-.{{EX:cd openldap-VERSION}}
-
-Replacing {{EX:VERSION}} with the appropriate version string.
-
-Note: If you intend to build OpenLDAP for multiple platforms from a
-single source tree you should consult the {{F: INSTALL}} file in the
-top level distribution directory before running {{EX:configure}}.
+H2: Running configure
Now you should probably run the {{EX:configure}} script with the
{{EX:--help}} option.
This will give you a list of options that you can change when building
OpenLDAP. Many of the features of OpenLDAP can be enabled or disabled
-using this method. Please see the appendix for a more detailed list
-of configure options, and their usage.
-.{{EX:./configure --help}}
+using this method.
+!if 0
+Please see the appendix for a more detailed list of configure options,
+and their usage.
+!endif
+> ./configure --help
-The {{EX:configure}} script will also look at certain environment variables
-for certain settings. These environment variables are:
+The {{EX:configure}} script will also look at various environment variables
+for certain settings. These environment variables include:
!block table; align=Center; coltags="EX,N"; title="Table 4.1: Environment Variables"
Variable Description
LIBS Specify additional libraries
!endblock
-Now run the configure script with any desired configure options or
+Now run the configure script with any desired configuration options or
environment variables.
> [[env] settings] ./configure [options]
-As an example, lets assume that we want a copy of OpenLDAP configured to use the
-LDBM backend, and the shell backend. The LDBM backend is turned on by default, so we don't need to do anything special to enable it.
+As an example, let's assume that we want to install OpenLDAP with
+BDB backend and TCP Wrappers support. By default, BDB
+is enabled and TCP Wrappers is not. So, we just need to specify
+{{EX:--with-wrappers}} to include TCP Wrappers support:
-Additionally, we've installed the BerkeleyDB database package.
-{{EX:configure}} is smart enough to use BerkeleyDB automatically
-if it can find it, but BerkeleyDB is installed by default in a
-place {{EX:configure}} won't look at automatically. BerkeleyDB
-is usually installed in {{F:/usr/local/BerkeleyDB.3.1}} (assuming
-that version 3.1 is being used.)
+> ./configure --with-wrappers
-The following example shows how to run {{EX:configure}} and specify where to
-find BerkeleyDB and turn on the DNS-SRV backend. The example should be
-entered on a single line (it has been split onto separate lines for clarity.)
+However, this will fail to locate dependent software not
+installed in system directories. For example, if TCP Wrappers
+headers and libraries are installed in {{F:/usr/local/include}}
+and {{F:/usr/local/lib}} respectively, the {{EX:configure}}
+script should be called as follows:
-> env CPPFLAGS="-I/usr/local/BerkeleyDB.3.1/include" \
-> LDFLAGS="-L/usr/local/BerkeleyDB.3.1/lib" \
-> ./configure --enable-dnssrv
+> env CPPFLAGS="-I/usr/local/include" LDFLAGS="-L/usr/local/lib" \
+> ./configure --with-wrappers
Note: Some shells, such as those derived from the Bourne {{sh}}(1),
do not require use of the {{env}}(1) command. In some cases, environmental
variables have to be specified using alternative syntaxes.
-For more information on backends see the chapter on configuration.
+The {{EX:configure}} script will normally auto-detect appropriate
+settings. If you have problems at this stage, consult any platform
+specific hints and check your {{EX:configure}} options, if any.
-The {{EX:configure}} script will normally auto-detect appropriate settings.
-If you have problems at this stage, consult any platform specific
-hints and check your {{EX:configure}} options if any.
H2: Building the Software
should be:
> Please "make depend" to build dependencies
-If the last line of output does not match, {{EX:configure}} has failed.
+If the last line of output does not match, {{EX:configure}} has failed,
+and you will need to review its output to determine what went wrong.
You should not proceed until {{EX:configure}} completes successfully.
To build dependencies, run:
everything is built correctly. Note that this command builds the LDAP
libraries and associated clients as well as {{slapd}}(8) and {{slurpd}}(8).
+
H2: Testing the Software
Once the software has been properly configured and successfully
> make test
-The test will run a number of tests.
+Tests which apply to your configuration will run and they should pass.
+Some tests, such as the replication test, may be skipped if not supported
+by your configuration.
+
H2: Installing the Software
-One you have successfully tested the software, you are ready to install it.
-You will need to have write permission
-to the installation directories you specified when you ran configure.
-By default OpenLDAP is installed in {{F:/usr/local}}. If you changed this
-setting with the {{F:--prefix}} configure option, it will be installed
-in the location you provided.
+Once you have successfully tested the software, you are ready to
+install it. You will need to have write permission to the installation
+directories you specified when you ran configure. By default
+OpenLDAP Software is installed in {{F:/usr/local}}. If you changed
+this setting with the {{EX:--prefix}} configure option, it will be
+installed in the location you provided.
+
+Typically, the installation requires {{super-user}} privileges.
+From the top level OpenLDAP source directory, type:
-Typically, the installation is done as {{root}}. From the top level OpenLDAP
-source directory, type:
+> su root -c 'make install'
-> make install
+and enter the appropriate password when requested.
You should examine the output of this command carefully to make sure
everything is installed correctly. You will find the configuration files
-for slapd in {{F:/usr/local/etc/openldap}} by default. See chapter 5 for more
-information on the configuration files.
+for {{slapd}}(8) in {{F:/usr/local/etc/openldap}} by default. See the
+chapter {{SECT:The slapd Configuration File}} for additional information.
projects / openldap / blobdiff