-# $OpenLDAP$
+# $OpenLDAP$
# Copyright 1999-2007 The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
Replicated directories are a fundamental requirement for delivering a
resilient enterprise deployment.
-OpenLDAP has various configuration options for creating a replicated
+{{PRD:OpenLDAP}} has various configuration options for creating a replicated
directory. The following sections will discuss these.
H2: Replication Strategies
H5: Replacing Slurpd
-Slurpd replication has been deprecated in favor of Syncrepl replication and
-has been completely removed from 2.4.
+{{Slurpd}} replication has been deprecated in favor of Syncrepl replication and
+has been completely removed from OpenLDAP 2.4.
{{Why was it replaced?}}
-The slurpd daemon was the original replication mechanism inherited from
+The {{slurpd}} daemon was the original replication mechanism inherited from
UMich's LDAP and operates in push mode: the master pushes changes to the
slaves. It has been replaced for many reasons, in brief:
- - It is not reliable
- - It is extremely sensitive to the ordering of records in the replog
- - It can easily go out of sync, at which point manual intervention is
+ * It is not reliable
+ * It is extremely sensitive to the ordering of records in the replog
+ * It can easily go out of sync, at which point manual intervention is
required to resync the slave database with the master directory
- - It isn't very tolerant of unavailable servers. If a slave goes down
+ * It isn't very tolerant of unavailable servers. If a slave goes down
for a long time, the replog may grow to a size that's too large for
slurpd to process
{{What was it replaced with?}}
-Syncrepl.
+Syncrepl
{{Why is Syncrepl better?}}
- - Syncrepl is self-synchronizing; you can start with a database in any
+ * Syncrepl is self-synchronizing; you can start with a database in any
state from totally empty to fully synced and it will automatically do
the right thing to achieve and maintain synchronization
- - Syncrepl can operate in either direction
- - Data updates can be minimal or maximal
+ * Syncrepl can operate in either direction
+ * Data updates can be minimal or maximal
{{How do I implement a pushed based replication system using Syncrepl?}}
The easiest way is to point an LDAP backend ({{SECT: Backends}} and {{slapd-ldap(8)}})
-to your slave/s directory and setup Syncrepl to point to your Master database.
+to your slave directory and setup Syncrepl to point to your Master database.
REFERENCE test045/048 for better explanation of above.
H3: MirrorMode
+MirrorMode is a hybrid configuration that provides all of the consistency
+guarantees of single-master replication, while also providing the high
+availability of multi-master. In MirrorMode two masters are set up to
+replicate from each other (as a multi-master configuration) but an
+external frontend is employed to direct all writes to only one of
+the two servers. The second master will only be used for writes if
+the first master crashes, at which point the frontend will switch to
+directing all writes to the second master. When a crashed master is
+repaired and restarted it will automatically catch up to any changes
+on the running master and resync.
+
+This is discussed in full in the {{SECT:MirrorMode}} section below
H2: LDAP Sync Replication
H2: MirrorMode
+H3: Arguments for MirrorMode
+
+* Provides a high-availability (HA) solution for directory writes (replicas handle reads)
+* As long as one Master is operational, writes can safely be excepted
+* Master nodes replicate from each other, so they are always up to date and
+can be ready to take over (hot standby)
+* Syncrepl also allows the master nodes to re-synchronize after any downtime
+* Delta-Syncrepl can be used
+
+
+H3: Arguments against MirrorMode
+
+* MirrorMode is not what is termed as a Multi-Master solution. This is because
+writes have to go to one of the mirror nodes at a time
+* MirrorMode can be termed as Active-Active Hot-Standby, therefor an external
+server (slapd in proxy mode) or device (hardware load balancer) to manage which
+master is currently active
+* While syncrepl can recover from a completely empty database, slapadd is much
+faster
+* Does not provide faster or more scalable write performance (neither could
+ any Multi-Master solution)
+* Backups are managed slightly differently
+- If backing up the Berkeley database itself and periodically backing up the
+transaction log files, then the same member of the mirror pair needs to be
+used to collect logfiles until the next database backup is taken
+- To ensure that both databases are consistent, each database might have to be
+put in read-only mode while performing a slapcat.
+- When using slapcat, the generated LDIF files can be rather large. This can
+happen with a non-MirrorMode deployment also.
+
+H3: MirrorMode Configuration
+
+MirrorMode configuration is actually very easy. If you have ever setup a normal
+slapd syncrepl provider, then the only change is the directive:
+
+> mirrormode on
+
+You also need to make you the {{rid}} of each mirror node pair is different and
+that the {{provider}} syncrepl directive points to the other mirror pair.
+
+H4: Mirror Node Configuration
+
+This is the same as the {{SECT:Set up the provider slapd}} section, referencing
+{{SECT:delta-syncrepl replication}} if using {{delta-syncrepl}}.
+
+Here's a specific cut down example using {{SECT:LDAP Sync Replication}} in
+{{refreshAndPersist}} mode ({{delta-syncrepl}} can be used also):
+
+MirrorMode node 1:
+
+> # syncrepl directives\r
+> syncrepl rid=1\r
+> provider=ldap://ldap-rid2.example.com\r
+> bindmethod=simple\r
+> binddn="cn=mirrormode,dc=example,dc=com"\r
+> credentials=mirrormode\r
+> searchbase="dc=example,dc=com"\r
+> schemachecking=on\r
+> type=refreshAndPersist\r
+> retry="60 +"\r
+> \r
+> mirrormode on
+
+MirrorMode node 2:
+
+> # syncrepl directives\r
+> syncrepl rid=2\r
+> provider=ldap://ldap-rid1.example.com\r
+> bindmethod=simple\r
+> binddn="cn=mirrormode,dc=example,dc=com"\r
+> credentials=mirrormode\r
+> searchbase="dc=example,dc=com"\r
+> schemachecking=on\r
+> type=refreshAndPersist\r
+> retry="60 +"\r
+> \r
+> mirrormode on
+
+It's simple really; each MirrorMode node is setup {{B:exactly}} the same, except
+that the {{B:provider}} directive is set to point to the other MirrorMode node.
+
+H4: Failover Configuration
+
+There are generally 2 choices for this; 1. Hardware proxies/load-balancing or
+dedicated proxy software, 2. using a Back-LDAP proxy as a syncrepl provider
+
+MORE HERE and a nice PICTURE
+
+
+H4: Normal Consumer Configuration
+
+This is exactly the same as the {{SECT:Set up the consumer slapd}} section. It
+can either setup in normal {{SECT:syncrepl replication}} mode, or in
+{{SECT:delta-syncrepl replication}} mode.
+
+H3: MirrorMode Summary
+
+Hopefully you will now have a directory architecture that provides all of the
+consistency guarantees of single-master replication, whilst also providing the
+high availability of multi-master replication.
+