# $OpenLDAP$
-# Copyright 1999-2006 The OpenLDAP Foundation, All Rights Reserved.
+# Copyright 1999-2007 The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
H1: The slapd Configuration File
{{slapd.conf}}(5) file, normally installed in the
{{EX:/usr/local/etc/openldap}} directory.
-An alternate configuration file can be specified via a
-command-line option to {{slapd}}(8) or {{slurpd}}(8). This chapter
-describes the general format of the config file, followed by a
-detailed description of commonly used config file directives.
+An alternate configuration file location can be specified via a command-line
+option to {{slapd}}(8). This chapter describes the general format
+of the {{slapd.conf}}(5) configuration file, followed by a detailed
+description of commonly used config file directives.
H2: Configuration File Format
H4: access to <what> [ by <who> [<accesslevel>] [<control>] ]+
-This directive grants access (specified by <accesslevel>) to a
-set of entries and/or attributes (specified by <what>) by one or
-more requesters (specified by <who>).
-See the {{SECT:Access Control}} section of this chapter for a
-summary of basic usage.
+This directive grants access (specified by <accesslevel>) to a set
+of entries and/or attributes (specified by <what>) by one or more
+requestors (specified by <who>). See the {{SECT:The access
+Configuration Directive}} section of this chapter for a summary of
+basic usage.
!if 0
More details discussion of this directive can be found in the
or consult the table below. The possible values for <integer> are:
!block table; colaligns="RL"; align=Center; \
- title="Table 5.1: Debugging Levels"
+ title="Table 6.1: Debugging Levels"
Level Description
-1 enable all debugging
0 no debugging
This directive marks the beginning of a backend declaration.
{{EX:<type>}} should be one of the
-supported backend types listed in Table 5.2.
+supported backend types listed in Table 6.2.
!block table; align=Center; coltags="EX,N"; \
title="Table 5.2: Database Backends"
This directive marks the beginning of a database instance
declaration.
{{EX:<type>}} should be one of the
-supported backend types listed in Table 5.2.
+supported backend types listed in Table 6.2.
\Example:
> readonly off
-H4: replica
-
-> replica uri=ldap[s]://<hostname>[:<port>] | host=<hostname>[:<port>]
-> [bindmethod={simple|sasl}]
-> ["binddn=<DN>"]
-> [saslmech=<mech>]
-> [authcid=<identity>]
-> [authzid=<identity>]
-> [credentials=<password>]
-
-This directive specifies a replication site for this database. The
-{{EX:uri=}} parameter specifies a scheme, a host and optionally a port where
-the slave slapd instance can be found. Either a domain name
-or IP address may be used for <hostname>. If <port> is not
-given, the standard LDAP port number (389 or 636) is used.
-
-{{EX:host}} is deprecated in favor of the {{EX:uri}} parameter.
-
-{{EX:uri}} allows the replica LDAP server to be specified as an LDAP
-URI such as {{EX:ldap://slave.example.com:389}} or
-{{EX:ldaps://slave.example.com:636}}.
-
-The {{EX:binddn=}} parameter gives the DN to bind as for updates
-to the slave slapd. It should be a DN which has read/write access
-to the slave slapd's database. It must also match the {{EX:updatedn}}
-directive in the slave slapd's config file. Generally, this DN
-{{should not}} be the same as the {{EX:rootdn}} of the master
-database. Since DNs are likely to contain embedded spaces, the
-entire {{EX:"binddn=<DN>"}} string should be enclosed in double
-quotes.
-
-The {{EX:bindmethod}} is {{EX:simple}} or {{EX:sasl}}, depending
-on whether simple password-based authentication or {{TERM:SASL}}
-authentication is to be used when connecting to the slave slapd.
-
-Simple authentication should not be used unless adequate data
-integrity and confidentiality protections are in place (e.g. TLS
-or IPSEC). Simple authentication requires specification of
-{{EX:binddn}} and {{EX:credentials}} parameters.
-
-SASL authentication is generally recommended. SASL authentication
-requires specification of a mechanism using the {{EX:saslmech}} parameter.
-Depending on the mechanism, an authentication identity and/or
-credentials can be specified using {{EX:authcid}} and {{EX:credentials}}
-respectively. The {{EX:authzid}} parameter may be used to specify
-an authorization identity.
-
-See the chapter entitled {{SECT:Replication with slurpd}} for more
-information on how to use this directive.
-
-
-H4: replogfile <filename>
-
-This directive specifies the name of the replication log file to
-which slapd will log changes. The replication log is typically
-written by slapd and read by slurpd. Normally, this directive is
-only used if slurpd is being used to replicate the database.
-However, you can also use it to generate a transaction log, if
-slurpd is not running. In this case, you will need to periodically
-truncate the file, since it will grow indefinitely otherwise.
-
-See the chapter entitled {{SECT:Replication with slurpd}} for more
-information on how to use this directive.
-
H4: rootdn <DN>
> [type=refreshOnly|refreshAndPersist]
> [interval=dd:hh:mm:ss]
> [retry=[<retry interval> <# of retries>]+]
-> [searchbase=<base DN>]
+> searchbase=<base DN>
> [filter=<filter str>]
> [scope=sub|one|base]
> [attrs=<attr list>]
Simple authentication should not be used unless adequate data
integrity and confidentiality protections are in place (e.g. TLS
-or IPSEC). Simple authentication requires specification of {{EX:binddn}}
+or IPsec). Simple authentication requires specification of {{EX:binddn}}
and {{EX:credentials}} parameters.
SASL authentication is generally recommended. SASL authentication
for more information on how to use this directive.
-H4: updatedn <DN>
-
-This directive is only applicable in a slave slapd. It specifies
-the DN allowed to make changes to the replica. This may be the DN
-{{slurpd}}(8) binds as when making changes to the replica or the DN
-associated with a SASL identity.
-
-Entry-based Example:
-
-> updatedn "cn=Update Daemon,dc=example,dc=com"
-
-SASL-based Example:
-
-> updatedn "uid=slurpd,cn=example.com,cn=digest-md5,cn=auth"
-
-See the {{SECT:Replication with slurpd}} chapter for more information
-on how to use this directive.
-
H4: updateref <URL>
-This directive is only applicable in a slave slapd. It
+This directive is only applicable in a {{slave}} (or {{shadow}})
+{{slapd}}(8) instance. It
specifies the URL to return to clients which submit update
requests upon the replica.
If specified multiple times, each {{TERM:URL}} is provided.
> directory /usr/local/var/openldap-data
-H2: Access Control
+H2: The access Configuration Directive
-Access to slapd entries and attributes is controlled by the
+Access to entries and attributes is controlled by the
access configuration file directive. The general form of an
access line is:
The following table summarizes entity specifiers:
!block table; align=Center; coltags="EX,N"; \
- title="Table 5.3: Access Entity Specifiers"
+ title="Table 6.3: Access Entity Specifiers"
Specifier|Entities
*|All, including anonymous and authenticated users
anonymous|Anonymous (non-authenticated) users
The kind of <access> granted can be one of the following:
!block table; colaligns="LRL"; coltags="EX,EX,N"; align=Center; \
- title="Table 5.4: Access Levels"
+ title="Table 6.4: Access Levels"
Level Privileges Description
none =0 no access
disclose =d needed for information disclosure on error
shows the use of an attribute selector to grant access to a specific
attribute and various {{EX:<who>}} selectors.
-> access to dn.subtree="dc=example,dc=com" attr=homePhone
+> access to dn.subtree="dc=example,dc=com" attrs=homePhone
> by self write
> by dn.children="dc=example,dc=com" search
> by peername.regex=IP:10\..+ read
their own DN from the member attribute, you could accomplish
it with an access directive like this:
-> access to attr=member,entry
+> access to attrs=member,entry
> by dnattr=member selfwrite
The dnattr {{EX:<who>}} selector says that the access applies to
E: 8. directory /usr/local/var/openldap-data
E: 9. rootdn "cn=Manager,dc=example,dc=com"
E: 10. rootpw secret
-E: 11. # replication directives
-E: 12. replogfile /usr/local/var/openldap/slapd.replog
-E: 13. replica uri=ldap://slave1.example.com:389
-E: 14. binddn="cn=Replicator,dc=example,dc=com"
-E: 15. bindmethod=simple credentials=secret
-E: 16. replica uri=ldaps://slave2.example.com:636
-E: 17. binddn="cn=Replicator,dc=example,dc=com"
-E: 18. bindmethod=simple credentials=secret
-E: 19. # indexed attribute definitions
-E: 20. index uid pres,eq
-E: 21. index cn,sn,uid pres,eq,approx,sub
-E: 22. index objectClass eq
-E: 23. # database access control definitions
-E: 24. access to attr=userPassword
-E: 25. by self write
-E: 26. by anonymous auth
-E: 27. by dn.base="cn=Admin,dc=example,dc=com" write
-E: 28. by * none
-E: 29. access to *
-E: 30. by self write
-E: 31. by dn.base="cn=Admin,dc=example,dc=com" write
-E: 32. by * read
+E: 11. # indexed attribute definitions
+E: 12. index uid pres,eq
+E: 13. index cn,sn,uid pres,eq,approx,sub
+E: 14. index objectClass eq
+E: 15. # database access control definitions
+E: 16. access to attrs=userPassword
+E: 17. by self write
+E: 18. by anonymous auth
+E: 19. by dn.base="cn=Admin,dc=example,dc=com" write
+E: 20. by * none
+E: 21. access to *
+E: 22. by self write
+E: 23. by dn.base="cn=Admin,dc=example,dc=com" write
+E: 24. by * read
Line 5 is a comment. The start of the database definition is marked
by the database keyword on line 6. Line 7 specifies the DN suffix
password. This entry is not subject to access control or size or
time limit restrictions.
-Lines 11 through 18 are for replication. Line 12 specifies the
-replication log file (where changes to the database are logged -
-this file is written by slapd and read by slurpd). Lines 13 through
-15 specify the hostname and port for a replicated host, the DN to
-bind as when performing updates, the bind method (simple) and the
-credentials (password) for the binddn. Lines 16 through 18 specify
-a second replication site. See the {{SECT:Replication with slurpd}}
-chapter for more information on these directives.
-
-Lines 20 through 22 indicate the indices to maintain for various
+Lines 12 through 14 indicate the indices to maintain for various
attributes.
-Lines 24 through 32 specify access control for entries in this
+Lines 16 through 24 specify access control for entries in this
database. As this is the first database, the controls also apply
to entries not held in any database (such as the Root DSE). For
all applicable entries, the {{EX:userPassword}} attribute is writable
projects / openldap / blobdiff