.TH LDAP.CONF 5 "RELEASEDATE" "OpenLDAP LDVERSION"
.\" $OpenLDAP$
-.\" Copyright 1998-2002 The OpenLDAP Foundation All Rights Reserved.
+.\" Copyright 1998-2008 The OpenLDAP Foundation All Rights Reserved.
.\" Copying restrictions apply. See COPYRIGHT/LICENSE.
-.UC 6
.SH NAME
ldap.conf, .ldaprc \- ldap configuration file
.SH SYNOPSIS
ETCDIR/ldap.conf, .ldaprc
.SH DESCRIPTION
+If the environment variable \fBLDAPNOINIT\fP is defined, all
+defaulting is disabled.
+.LP
The
.I ldap.conf
configuration file is used to set system-wide defaults to be applied when
running
.I ldap
-clients. If the environment variable \fBLDAPNOINIT\fP is defined, all
-defaulting is disabled.
+clients.
.LP
Users may create an optional configuration file,
.I ldaprc
.I ldaprc
in the current working directory is also used.
.LP
+.LP
Additional configuration files can be specified using
the \fBLDAPCONF\fP and \fBLDAPRC\fP environment variables.
\fBLDAPCONF\fP may be set to the path of a configuration file. This
(or file specified by
.BR LDAPCONF ).
.SH OPTIONS
+The configuration options are case-insensitive;
+their value, on a case by case basis, may be case-sensitive.
+.LP
+Blank lines and lines beginning with a hash mark (`#')
+are ignored up to their end.
+.LP
+Valid lines are made of an option's name (a sequence of non-blanks,
+conventionally written in uppercase, although not required),
+followed by a value.
+The value starts with the first non-blank character after
+the option's name, and terminates at the end of the line,
+or at the last sequence of blanks before the end of the line.
+The tokenization of the value, if any, is delegated to the handler(s)
+for that option, if any. Quoting values that contain blanks
+may be incorrect, as the quotes would become part of the value.
+For example,
+
+ URI "ldap:// ldaps://"
+
+is incorrect, while
+
+ URI ldap:// ldaps://
+
+is correct (note the absence of the double quotes).
+.LP
+A line cannot be longer than LINE_MAX, which should be more than 2000 bytes
+on all platforms.
+There is no mechanism to split a long line on multiple lines, either for
+beautification or to overcome the above limit.
+.LP
The different configuration options are:
.TP
+.B URI <ldap[si]://[name[:port]] ...>
+Specifies the URI(s) of an LDAP server(s) to which the
+.I LDAP
+library should connect. The URI scheme may be any of
+.BR ldap ,
+.B ldaps
+or
+.BR ldapi ,
+which refer to LDAP over TCP, LDAP over SSL (TLS) and LDAP
+over IPC (UNIX domain sockets), respectively.
+Each server's name can be specified as a
+domain-style name or an IP address literal. Optionally, the
+server's name can followed by a ':' and the port number the LDAP
+server is listening on. If no port number is provided, the default
+port for the scheme is used (389 for ldap://, 636 for ldaps://).
+For LDAP over IPC,
+.B name
+is the name of the socket, and no
+.B port
+is required, nor allowed; note that directory separators must be
+URL-encoded, like any other characters that are special to URLs;
+so the socket
+
+ /usr/local/var/ldapi
+
+must be specified as
+
+ ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi
+
+A space separated list of URIs may be provided.
+.TP
.B BASE <base>
Specifies the default base DN to use when performing ldap operations.
The base must be specified as a Distinguished Name in LDAP format.
.B BINDDN <dn>
Specifies the default bind DN to use when performing ldap operations.
The bind DN must be specified as a Distinguished Name in LDAP format.
-This is a user\-only option.
+.B This is a user\-only option.
+.TP
+.B DEREF <when>
+Specifies how alias dereferencing is done when performing a search. The
+.B <when>
+can be specified as one of the following keywords:
+.RS
+.TP
+.B never
+Aliases are never dereferenced. This is the default.
+.TP
+.B searching
+Aliases are dereferenced in subordinates of the base object, but
+not in locating the base object of the search.
+.TP
+.B finding
+Aliases are only dereferenced when locating the base object of the search.
+.TP
+.B always
+Aliases are dereferenced both in searching and in locating the base object
+of the search.
+.RE
+.TP
.TP
.B HOST <name[:port] ...>
Specifies the name(s) of an LDAP server(s) to which the
-.I ldap
+.I LDAP
library should connect. Each server's name can be specified as a
domain-style name or an IP address and optionally followed by a ':' and
the port number the ldap server is listening on. A space separated
list of hosts may be provided.
+.B HOST
+is deprecated in favor of
+.BR URI .
+.TP
+.B NETWORK_TIMEOUT <integer>
+Specifies the timeout (in seconds) after which the poll(2)/select(2)
+following a connect(2) returns in case of no activity.
.TP
.B PORT <port>
Specifies the default port used when connecting to LDAP servers(s).
The port may be specified as a number.
+.B PORT
+is deprecated in favor of
+.BR URI.
+.TP
+.B REFERRALS <on/true/yes/off/false/no>
+Specifies if the client should automatically follow referrals returned
+by LDAP servers.
+The default is on.
+Note that the command line tools
+.BR ldapsearch (1)
+&co always override this option.
+.\" This should only be allowed via ldap_set_option(3)
+.\".TP
+.\".B RESTART <on/true/yes/off/false/no>
+.\"Determines whether the library should implicitly restart connections (FIXME).
+.TP
+.B SIZELIMIT <integer>
+Specifies a size limit to use when performing searches. The
+number should be a non-negative integer. \fISIZELIMIT\fP of zero (0)
+specifies unlimited search size.
+.TP
+.B TIMELIMIT <integer>
+Specifies a time limit to use when performing searches. The
+number should be a non-negative integer. \fITIMELIMIT\fP of zero (0)
+specifies unlimited search time to be used.
+.B VERSION {2|3}
+Specifies what version of the LDAP protocol should be used.
+.TP
+.B TIMEOUT <integer>
+Specifies a timeout (in seconds) after which calls to synchronous LDAP
+APIs will abort if no response is received. Also used for any
+.BR ldap_result (3)
+calls where a NULL timeout parameter is supplied.
+.SH SASL OPTIONS
+If OpenLDAP is built with Simple Authentication and Security Layer support,
+there are more options you can specify.
+.TP
+.B SASL_MECH <mechanism>
+Specifies the SASL mechanism to use.
+.B This is a user\-only option.
+.TP
+.B SASL_REALM <realm>
+Specifies the SASL realm.
+.B This is a user\-only option.
+.TP
+.B SASL_AUTHCID <authcid>
+Specifies the authentication identity.
+.B This is a user\-only option.
+.TP
+.B SASL_AUTHZID <authcid>
+Specifies the proxy authorization identity.
+.B This is a user\-only option.
.TP
.B SASL_SECPROPS <properties>
Specifies Cyrus SASL security properties. The
specifies the maximum security layer receive buffer
size allowed. 0 disables security layers. The default is 65536.
.RE
-.TP
-.B SIZELIMIT <integer>
-Specifies a size limit to use when performing searches. The
-number should be a non-negative integer. \fISIZELIMIT\fP of zero (0)
-specifies unlimited search size.
-.TP
-.B TIMELIMIT <integer>
-Specifies a time limit to use when performing searches. The
-number should be a non-negative integer. \fITIMELIMIT\fP of zero (0)
-specifies unlimited search time to be used.
-.TP
-.B DEREF <when>
-Specifies how alias dereferencing is done when performing a search. The
-.B <when>
-can be specified as one of the following keywords:
-.RS
-.TP
-.B never
-Aliases are never dereferenced. This is the default.
-.TP
-.B searching
-Aliases are dereferenced in subordinates of the base object, but
-not in locating the base object of the search.
-.TP
-.B finding
-Aliases are only dereferenced when locating the base object of the search.
-.TP
-.B always
-Aliases are dereferenced both in searching and in locating the base object
-of the search.
.SH TLS OPTIONS
-If OpenLDAP is built with support for Transport Layer Security, there
-are more options you can specify.
-.TP
-.B TLS <level>
-Specifies whether client connections should use TLS by default. The
-.B <level>
-can be specified as one of the following keywords:
-.RS
-.TP
-.B never
-This is the default. Connections will be opened in the clear unless
-TLS is explicitly specified (e.g. using an "ldaps://" URL.)
-.TP
-.B hard
-All connections will be established with TLS.
-Note that using this option effectively makes the library open every
-session as an ldaps session and is incompatible with the LDAPv3 StartTLS
-request.
-.RE
+If OpenLDAP is built with Transport Layer Security support, there
+are more options you can specify. These options are used when an
+.B ldaps:// URI
+is selected (by default or otherwise) or when the application
+negotiates TLS by issuing the LDAP StartTLS operation.
.TP
.B TLS_CACERT <filename>
Specifies the file that contains certificates for all of the Certificate
.B TLS_CACERT
is always used before
.B TLS_CACERTDIR.
+This parameter is ignored with GNUtls.
.TP
.B TLS_CERT <filename>
-Specifies the file that contains the client certificate. This is
-a user\-only option.
+Specifies the file that contains the client certificate.
+.B This is a user\-only option.
.TP
.B TLS_KEY <filename>
Specifies the file that contains the private key that matches the certificate
stored in the
.B TLS_CERT
file. Currently, the private key must not be protected with a password, so
-it is of critical importance that the key file is protected carefully. This
-is a user\-only option.
+it is of critical importance that the key file is protected carefully.
+.B This is a user\-only option.
+.TP
+.B TLS_CIPHER_SUITE <cipher-suite-spec>
+Specifies acceptable cipher suite and preference order.
+<cipher-suite-spec> should be a cipher specification for OpenSSL,
+e.g., HIGH:MEDIUM:+SSLv2.
.TP
.B TLS_RANDFILE <filename>
Specifies the file to obtain random bits from when /dev/[u]random is
not available. Generally set to the name of the EGD/PRNGD socket.
The environment variable RANDFILE can also be used to specify the filename.
+This parameter is ignored with GNUtls.
.TP
.B TLS_REQCERT <level>
Specifies what checks to perform on server certificates in a TLS session,
These keywords are equivalent. The server certificate is requested. If no
certificate is provided, or a bad certificate is provided, the session
is immediately terminated. This is the default setting.
+.RE
+.TP
+.B TLS_CRLCHECK <level>
+Specifies if the Certificate Revocation List (CRL) of the CA should be
+used to verify if the server certificates have not been revoked. This
+requires
+.B TLS_CACERTDIR
+parameter to be set. This parameter is ignored with GNUtls.
+.B <level>
+can be specified as one of the following keywords:
+.RS
+.TP
+.B none
+No CRL checks are performed
+.TP
+.B peer
+Check the CRL of the peer certificate
+.TP
+.B all
+Check the CRL for a whole certificate chain
+.RE
+.TP
+.B TLS_CRLFILE <filename>
+Specifies the file containing a Certificate Revocation List to be used
+to verify if the server certificates have not been revoked. This
+parameter is only supported with GNUtls.
.SH "ENVIRONMENT VARIABLES"
.TP
LDAPNOINIT
.I $CWD/ldaprc
local ldap configuration file
.SH "SEE ALSO"
-.BR ldap (3)
+.BR ldap (3),
+.BR ldap_set_option (3),
+.BR ldap_result (3),
+.BR openssl (1),
+.BR sasl (3)
.SH AUTHOR
Kurt Zeilenga, The OpenLDAP Project
.SH ACKNOWLEDGEMENTS
-.B OpenLDAP
-is developed and maintained by The OpenLDAP Project (http://www.openldap.org/).
-.B OpenLDAP
-is derived from University of Michigan LDAP 3.3 Release.
+.so ../Project
projects / openldap / blobdiff