.TH SLAPD.CONF 5 "RELEASEDATE" "OpenLDAP LDVERSION"
-.\" Copyright 1998-2003 The OpenLDAP Foundation All Rights Reserved.
+.\" Copyright 1998-2005 The OpenLDAP Foundation All Rights Reserved.
.\" Copying restrictions apply. See COPYRIGHT/LICENSE.
.\" $OpenLDAP$
.SH NAME
daemon. This configuration file is also used by the
.BR slurpd (8)
replication daemon and by the SLAPD tools
+.BR slapacl (8),
.BR slapadd (8),
+.BR slapauth (8),
.BR slapcat (8),
+.BR slapdn (8),
+.BR slapindex (8),
and
-.BR slapindex (8).
+.BR slaptest (8).
.LP
The
.B slapd.conf
as a whole (including all backends), followed by zero or more database
backend definitions that contain information specific to a backend
instance.
+The configuration options are case-insensitive;
+their value, on a case by case basis, may be case-sensitive.
.LP
The general format of
.B slapd.conf
# comment - these options apply to every database
<global configuration options>
# first database definition & configuration options
- database <backend 1 type>
+ database <backend 1 type>
<configuration options specific to backend 1>
# subsequent database definitions & configuration options
...
options can be overridden in a backend (for options that appear more
than once, the last appearance in the
.B slapd.conf
-file is used). Blank lines and comment lines beginning with a `#'
-character are ignored. If a line begins with white space, it is
-considered a continuation of the previous line.
+file is used).
+.LP
+If a line begins with white space, it is considered a continuation
+of the previous line. Blank lines and comment lines beginning with
+a `#' character are ignored. Note: continuation lines are unwrapped
+before comment processing is applied.
.LP
Arguments on configuration lines are separated by white space. If an
argument contains white space, the argument should be enclosed in
Grant access (specified by <access>) to a set of entries and/or
attributes (specified by <what>) by one or more requestors (specified
by <who>).
+If no access controls are present, the default policy
+allows anyone and everyone to read anything but restricts
+updates to rootdn. (e.g., "access to * by * read").
+The rootdn can always read and write EVERYTHING!
See
.BR slapd.access (5)
and the "OpenLDAP's Administrator's Guide" for details.
.B bind_v2
allows acceptance of LDAPv2 bind requests. Note that
.BR slapd (8)
-does not truely implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
+does not truly implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
.B bind_anon_cred
allows anonymous bind when credentials are not empty (e.g.
when DN is empty).
as the option with the range name sans the trailing `-'.
That is, `x-foo-bar-' matches `x-foo-bar' and `x-foo-bar-baz'.
-RFC2251 reserves options beginning with `x-' for private experiments.
-Other options should be registered with IANA, see RFC3383 section 3.4.
+RFC 2251 reserves options beginning with `x-' for private experiments.
+Other options should be registered with IANA, see RFC 3383 section 3.4.
OpenLDAP also has the `binary' option built in, but this is a transfer
option, not a tagging option.
.HP
.hy 0
-.B attributetype "(\ <oid> [NAME\ <name>] [OBSOLETE]\
+.B attributetype "(\ <oid>\
+ [NAME\ <name>]\
[DESC\ <description>]\
- [SUP\ <oid>] [EQUALITY\ <oid>] [ORDERING\ <oid>]\
- [SUBSTR\ <oid>] [SYNTAX\ <oidlen>] [SINGLE\-VALUE] [COLLECTIVE]\
- [NO\-USER\-MODIFICATION] [USAGE\ <attributeUsage>]\ )"
+ [OBSOLETE]\
+ [SUP\ <oid>]\
+ [EQUALITY\ <oid>]\
+ [ORDERING\ <oid>]\
+ [SUBSTR\ <oid>]\
+ [SYNTAX\ <oidlen>]\
+ [SINGLE\-VALUE]\
+ [COLLECTIVE]\
+ [NO\-USER\-MODIFICATION]\
+ [USAGE\ <attributeUsage>]\ )"
.RS
Specify an attribute type using the LDAPv3 syntax defined in RFC 2252.
The slapd parser extends the RFC 2252 definition by allowing string
description.)
.RE
.TP
+.B authz-policy <policy>
+Used to specify which rules to use for Proxy Authorization. Proxy
+authorization allows a client to authenticate to the server using one
+user's credentials, but specify a different identity to use for authorization
+and access control purposes. It essentially allows user A to login as user
+B, using user A's password.
+The
+.B none
+flag disables proxy authorization. This is the default setting.
+The
+.B from
+flag will use rules in the
+.I authzFrom
+attribute of the authorization DN.
+The
+.B to
+flag will use rules in the
+.I authzTo
+attribute of the authentication DN.
+The
+.B any
+flag, an alias for the deprecated value of
+.BR both ,
+will allow any of the above, whatever succeeds first (checked in
+.BR to ,
+.B from
+sequence.
+The
+.B all
+flag requires both authorizations to succeed.
+.LP
+.RS
+The rules are mechanisms to specify which identities are allowed
+to perform proxy authorization.
+The
+.I authzFrom
+attribute in an entry specifies which other users
+are allowed to proxy login to this entry. The
+.I authzTo
+attribute in
+an entry specifies which other users this user can authorize as. Use of
+.I authzTo
+rules can be easily
+abused if users are allowed to write arbitrary values to this attribute.
+In general the
+.I authzTo
+attribute must be protected with ACLs such that
+only privileged users can modify it.
+The value of
+.I authzFrom
+and
+.I authzTo
+describes an
+.B identity
+or a set of identities; it can take three forms:
+.RS
+.TP
+.B ldap:///<base>??[<scope>]?<filter>
+.RE
+.RS
+.B dn[.<dnstyle>]:<pattern>
+.RE
+.RS
+.B u[<mech>[<realm>]]:<pattern>
+.RE
+.RS
+.B group[/objectClass[/attributeType]]:<pattern>
+.RE
+.RS
+.B <pattern>
+.RE
+.RS
+
+.B <dnstyle>:={exact|onelevel|children|subtree|regex}
+
+.RE
+The first form is a valid LDAP
+.B URI
+where the
+.IR <host>:<port> ,
+the
+.I <attrs>
+and the
+.I <extensions>
+portions must be absent, so that the search occurs locally on either
+.I authzFrom
+or
+.IR authzTo .
+The second form is a
+.BR DN ,
+with the optional style modifiers
+.IR exact ,
+.IR onelevel ,
+.IR children ,
+and
+.I subtree
+for exact, onelevel, children and subtree matches, which cause
+.I <pattern>
+to be normalized according to the DN normalization rules, or the special
+.I regex
+style, which causes the
+.I <pattern>
+to be treated as a POSIX (''extended'') regular expression, as
+discussed in
+.BR regex (7)
+and/or
+.BR re_format (7).
+A pattern of
+.I *
+means any non-anonymous DN.
+The third form is a SASL
+.BR id ,
+with the optional fields
+.I <mech>
+and
+.I <realm>
+that allow to specify a SASL
+.BR mechanism ,
+and eventually a SASL
+.BR realm ,
+for those mechanisms that support one.
+The need to allow the specification of a mechanism is still debated,
+and users are strongly discouraged to rely on this possibility.
+The fourth form is a group specification, consisting of the keyword
+.BR group ,
+optionally followed by the specification of the group
+.B objectClass
+and member
+.BR attributeType .
+The group with DN
+.B <pattern>
+is searched with base scope, and in case of match, the values of the
+member
+.B attributeType
+are searched for the asserted DN.
+For backwards compatibility, if no identity type is provided, i.e. only
+.B <pattern>
+is present, an
+.I exact DN
+is assumed; as a consequence,
+.B <pattern>
+is subjected to DN normalization.
+Since the interpretation of
+.I authzFrom
+and
+.I authzTo
+can impact security, users are strongly encouraged
+to explicitly set the type of identity specification that is being used.
+A subset of these rules can be used as third arg in the
+.B authz-regexp
+statement (see below); significantly, the
+.I URI
+and the
+.I dn.exact:<dn>
+forms.
+.RE
+.TP
+.B authz-regexp <match> <replace>
+Used by the authentication framework to convert simple user names,
+such as provided by SASL subsystem, to an LDAP DN used for
+authorization purposes. Note that the resultant DN need not refer
+to an existing entry to be considered valid. When an authorization
+request is received from the SASL subsystem, the SASL
+.BR USERNAME ,
+.BR REALM ,
+and
+.B MECHANISM
+are taken, when available, and combined into a name of the form
+.RS
+.RS
+.TP
+.B UID=<username>[[,CN=<realm>],CN=<mechanism>],CN=auth
+
+.RE
+This name is then compared against the
+.B match
+POSIX (''extended'') regular expression, and if the match is successful,
+the name is replaced with the
+.B replace
+string. If there are wildcard strings in the
+.B match
+regular expression that are enclosed in parenthesis, e.g.
+.RS
+.TP
+.B UID=([^,]*),CN=.*
+
+.RE
+then the portion of the name that matched the wildcard will be stored
+in the numbered placeholder variable $1. If there are other wildcard strings
+in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
+placeholders can then be used in the
+.B replace
+string, e.g.
+.RS
+.TP
+.B UID=$1,OU=Accounts,DC=example,DC=com
+
+.RE
+The replaced name can be either a DN, i.e. a string prefixed by "dn:",
+or an LDAP URI.
+If the latter, the server will use the URI to search its own database(s)
+and, if the search returns exactly one entry, the name is
+replaced by the DN of that entry. The LDAP URI must have no
+hostport, attrs, or extensions components, but the filter is mandatory,
+e.g.
+.RS
+.TP
+.B ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)
+
+.RE
+The protocol portion of the URI must be strictly
+.BR ldap .
+
+Multiple
+.B authz-regexp
+options can be given in the configuration file to allow for multiple matching
+and replacement patterns. The matching patterns are checked in the order they
+appear in the file, stopping at the first successful match.
+
+.\".B Caution:
+.\"Because the plus sign + is a character recognized by the regular expression engine,
+.\"and it will appear in names that include a REALM, be careful to escape the
+.\"plus sign with a backslash \\+ to remove the character's special meaning.
+.RE
+.TP
.B concurrency <integer>
Specify a desired level of concurrency. Provided to the underlying
thread system as a hint. The default is not to provide any hint.
.B conn_max_pending_auth <integer>
Specify the maximum number of pending requests for an authenticated session.
The default is 1000.
-.\".TP
-.\".B debug <subsys> <level>
-.\"Specify a logging level for a particular subsystem. The subsystems include
-.\".B global
-.\"a global level for all subsystems,
-.\".B acl
-.\"the ACL engine,
-.\".B backend
-.\"the backend databases,
-.\".B cache
-.\"the entry cache manager,
-.\".B config
-.\"the config file reader,
-.\".B connection
-.\"the connection manager,
-.\".B cyrus
-.\"the Cyrus SASL library interface,
-.\".B filter
-.\"the search filter processor,
-.\".B getdn
-.\"the DN normalization library,
-.\".B index
-.\"the database indexer,
-.\".B liblber
-.\"the ASN.1 BER library,
-.\".B module
-.\"the dynamic module loader,
-.\".B operation
-.\"the LDAP operation processors,
-.\".B sasl
-.\"the SASL authentication subsystem,
-.\".B schema
-.\"the schema processor, and
-.\".B tls
-.\"the TLS library interface. This is not an exhaustive list; there are many
-.\"other subsystems and more are added over time.
-.\"
-.\"The levels are, in order of decreasing priority:
-.\".B emergency, alert, critical, error, warning, notice, information, entry,
-.\".B args, results, detail1, detail2
-.\"An integer may be used instead, with 0 corresponding to
-.\".B emergency
-.\"up to 11 for
-.\".BR detail2 .
-.\"The
-.\".B entry
-.\"level logs function entry points,
-.\".B args
-.\"adds function call parameters, and
-.\".B results
-.\"adds the function results to the logs.
-.\"The
-.\".B detail1
-.\"and
-.\".B detail2
-.\"levels add even more low level detail from individual functions.
.TP
.B defaultsearchbase <dn>
Specify a default search base to use when client submits a
disables acceptance of anonymous bind requests.
.B bind_simple
disables simple (bind) authentication.
-.B bind_krbv4
-disables Kerberos V4 (bind) authentication.
.B tls_2_anon
disables Start TLS from forcing session to anonymous status (see also
.BR tls_authc ).
.B tls_authc
disables StartTLS if authenticated (see also
.BR tls_2_anon ).
+.HP
+.hy 0
+.B ditcontentrule "(\ <oid>\
+ [NAME\ <name>]\
+ [DESC\ <description>]\
+ [OBSOLETE]\
+ [AUX\ <oids>]\
+ [MUST\ <oids>]\
+ [MAY\ <oids>]\
+ [NOT\ <oids>]\ )"
+.RS
+Specify an DIT Content Rule using the LDAPv3 syntax defined in RFC 2252.
+The slapd parser extends the RFC 2252 definition by allowing string
+forms as well as numeric OIDs to be used for the attribute OID and
+attribute syntax OID.
+(See the
+.B objectidentifier
+description.)
+.RE
.TP
.B gentlehup { on | off }
A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
Read additional configuration information from the given file before
continuing with the next line of the current file.
.TP
-.B limits <who> <limit> [<limit> [...]]
-Specify time and size limits based on who initiated an operation.
-The argument
-.B who
-can be any of
-.RS
-.RS
-.TP
-anonymous | users | [dn[.<style>]=]<pattern>
-
-.RE
-with
-.RS
-.TP
-<style> ::= exact | base | one | subtree | children | regex | anonymous
-
-.RE
-The term
-.B anonymous
-matches all unauthenticated clients.
-the term
-.B users
-matches all authenticated clients;
-otherwise a
-.B regex
-dn pattern is assumed unless otherwise specified by qualifying
-the (optional) key string
-.B dn
-with
-.B exact
-or
-.B base
-(which are synonims), to require an exact match; with
-.BR one,
-to require exactly one level of depth match; with
-.BR subtree,
-to allow any level of depth match, including the exact match; with
-.BR children,
-to allow any level of depth match, not including the exact match;
-.BR regex
-explicitly requires the (default) match based on regular expression
-pattern, as detailed in
-.BR regex (7).
-Finally,
-.B anonymous
-matches unbound operations; the
-.B pattern
-field is ignored.
-The same behavior is obtained by using the
-.B anonymous
-form of the
-.B who
-clause.
-
-The currently supported limits are
-.B size
-and
-.BR time.
+.B index_substr_if_minlen <integer>
+Specify the minimum length for subinitial and subfinal indices. An
+attribute value must have at least this many characters in order to be
+processed by the indexing functions. The default is 2.
+.TP
+.B index_substr_if_maxlen <integer>
+Specify the maximum length for subinitial and subfinal indices. Only
+this many characters of an attribute value will be processed by the
+indexing functions; any excess characters are ignored. The default is 4.
+.TP
+.B index_substr_any_len <integer>
+Specify the length used for subany indices. An attribute value must have
+at least this many characters in order to be processed. Attribute values
+longer than this length will be processed in segments of this length. The
+default is 4. The subany index will also be used in subinitial and
+subfinal index lookups when the filter string is longer than the
+.I index_substr_if_maxlen
+value.
+.TP
+.B index_substr_any_step <integer>
+Specify the steps used in subany index lookups. This value sets the offset
+for the segments of a filter string that are processed for a subany index
+lookup. The default is 2. For example, with the default values, a search
+using this filter "cn=*abcdefgh*" would generate index lookups for
+"abcd", "cdef", and "efgh".
-The syntax for time limits is
-.BR time[.{soft|hard}]=<integer> ,
-where
-.BR integer
-is the number of seconds slapd will spend answering a search request.
-If no time limit is explicitly requested by the client, the
-.BR soft
-limit is used; if the requested time limit exceedes the
-.BR hard
-limit, an "Administrative limit exceeded" is returned.
-If the
-.BR hard
-limit is set to 0 or to the keyword "soft", the soft limit is used
-in either case; if it is set to -1 or to the keyword "none",
-no hard limit is enforced.
-Explicit requests for time limits smaller or equal to the
-.BR hard
-limit are honored.
-If no flag is set, the value is assigned to the
-.BR soft
-limit, and the
-.BR hard
-limit is set to zero, to preserve the original behavior.
-
-The syntax for size limits is
-.BR size[.{soft|hard|unchecked}]=<integer> ,
-where
-.BR integer
-is the maximum number of entries slapd will return answering a search
-request.
-If no size limit is explicitly requested by the client, the
-.BR soft
-limit is used; if the requested size limit exceedes the
-.BR hard
-limit, an "Administrative limit exceeded" is returned.
-If the
-.BR hard
-limit is set to 0 or to the keyword "soft", the soft limit is used
-in either case; if it is set to -1 or to the keyword "none",
-no hard limit is enforced.
-Explicit requests for size limits smaller or equal to the
-.BR hard
-limit are honored.
-The
-.BR unchecked
-flag sets a limit on the number of candidates a search request is allowed
-to examine.
-If the selected candidates exceed the
-.BR unchecked
-limit, the search will abort with "Unwilling to perform".
-If it is set to -1 or to the keyword "none", no limit is applied (the default).
-If no flag is set, the value is assigned to the
-.BR soft
-limit, and the
-.BR hard
-limit is set to zero, to preserve the original behavior.
-
-In case of no match, the global limits are used.
-The default values are the same of
-.BR sizelimit
-and
-.BR timelimit ;
-no limit is set on
-.BR unchecked .
-
-If
-.B pagedResults
-control is defined, additional size limits may be enforced; the syntax is
-.BR size.pr={<integer>|noEstimate} ,
-where
-.BR integer
-is the max page size if no explicit limit is set; the keyword
-.BR noEstimate
-inhibits the server to return an estimate of the total number
-of entries that will be returned.
-.RE
+.\"-- NEW_LOGGING option --
.\".TP
.\".B logfile <filename>
.\"Specify a file for recording debug log messages. By default these messages
.\"only go to stderr and are not recorded anywhere else. Specifying a logfile
.\"copies messages to both stderr and the logfile.
.TP
-.B loglevel <integer>
+.B localSSF <SSF>
+Specifies the Security Strength Factor (SSF) to be given local LDAP sessions,
+such as those to the ldapi:// listener. For a description of SSF values,
+see
+.BR sasl-secprops 's
+.B minssf
+option description. The default is 71.
+.TP
+.B loglevel <integer> [...]
Specify the level at which debugging statements and operation
statistics should be syslogged (currently logged to the
.BR syslogd (8)
.PD 0
.TP
.B 1
+.B (trace)
trace function calls
.TP
.B 2
+.B (packet)
debug packet handling
.TP
.B 4
+.B (args)
heavy trace debugging
.TP
.B 8
+.B (conns)
connection management
.TP
.B 16
+.B (BER)
print out packets sent and received
.TP
.B 32
+.B (filter)
search filter processing
.TP
.B 64
+.B (config)
configuration file processing
.TP
.B 128
+.B (ACL)
access control list processing
.TP
.B 256
+.B (stats)
stats log connections/operations/results
.TP
.B 512
+.B (stats2)
stats log entries sent
.TP
.B 1024
+.B (shell)
print communication with shell backends
.TP
.B 2048
+.B (parse)
entry parsing
.PD
.RE
+The desired log level can be input as a single integer that combines
+the (ORed) desired levels, as a list of integers (that are ORed internally),
+or as a list of the names that are shown between brackets, such that
+.LP
+.nf
+ loglevel 129
+ loglevel 128 1
+ loglevel acl trace
+.fi
+.LP
+are equivalent.
+The keyword
+.B any
+can be used as a shortcut to enable logging at all levels (equivalent to -1).
.RE
.TP
.B moduleload <filename>
Specify a list of directories to search for loadable modules. Typically
the path is colon-separated but this depends on the operating system.
.HP
-.B objectclass "( <oid> [NAME <name>] [DESC <description] [OBSOLETE]\
- [SUP <oids>] [{ ABSTRACT | STRUCTURAL | AUXILIARY }] [MUST <oids>]\
- [MAY <oids>] )"
+.hy 0
+.B objectclass "(\ <oid>\
+ [NAME\ <name>]\
+ [DESC\ <description]\
+ [OBSOLETE]\
+ [SUP\ <oids>]\
+ [{ ABSTRACT | STRUCTURAL | AUXILIARY }]\
+ [MUST\ <oids>] [MAY\ <oids>] )"
.RS
Specify an objectclass using the LDAPv3 syntax defined in RFC 2252.
The slapd parser extends the RFC 2252 definition by allowing string
name can also be used with a suffix of the form ":xx" in which case the
value "oid.xx" will be used.
.TP
-.B password-hash <hash>
-This option sets the hash to be used in generation of user
-passwords, stored in userPassword, during processing of
-LDAP Password Modify Extended Operations (RFC 3052).
+.B password-hash <hash> [<hash>...]
+This option configures one or more hashes to be used in generation of user
+passwords stored in the userPassword attribute during processing of
+LDAP Password Modify Extended Operations (RFC 3062).
The <hash> must be one of
.BR {SSHA} ,
.BR {SHA} ,
This string needs to be in
.BR sprintf (3)
format and may include one (and only one) %s conversion.
-This conversion will be substituted with a string random
+This conversion will be substituted with a string of random
characters from [A\-Za\-z0\-9./]. For example, "%.2s"
provides a two character salt and "$1$%.8s" tells some
versions of crypt(3) to use an MD5 algorithm and provides
.BR getpid (2)
) if started without the debugging command line option.
.TP
+.B replicationinterval
+The number of seconds
+.B slurpd
+waits before checking the replogfile for changes.
+.TP
.B require <conditions>
Specify a set of conditions (separated by white space) to
require (default none).
for the root DSE. These attributes are returned in addition to the
attributes normally produced by slapd.
.TP
-.B sasl-authz-policy <policy>
-Used to specify which rules to use for SASL Proxy Authorization. Proxy
-authorization allows a client to authenticate to the server using one
-user's credentials, but specify a different identity to use for authorization
-and access control purposes. It essentially allows user A to login as user
-B, using user A's password.
-The
-.B none
-flag disables proxy authorization. This is the default setting.
-The
-.B from
-flag will use rules in the
-.I saslAuthzFrom
-attribute of the authorization DN.
-The
-.B to
-flag will use rules in the
-.I saslAuthzTo
-attribute of the authentication DN.
-The
-.B both
-flag will allow both of the above. The rules are simply regular expressions
-specifying which DNs are allowed to perform proxy authorization. The
-.I saslAuthzFrom
-attribute in an entry specifies which other users
-are allowed to proxy login to this entry. The
-.I saslAuthzTo
-attribute in
-an entry specifies which other users this user can authorize as. Use of
-.I saslAuthzTo
-rules can be easily
-abused if users are allowed to write arbitrary values to this attribute.
-In general the
-.I saslAuthzTo
-attribute must be protected with ACLs such that
-only privileged users can modify it.
-.TP
.B sasl-host <fqdn>
Used to specify the fully qualified domain name used for SASL processing.
.TP
.B sasl-realm <realm>
Specify SASL realm. Default is empty.
.TP
-.B sasl-regexp <match> <replace>
-Used by the SASL authorization mechanism to convert a SASL authenticated
-username to an LDAP DN. When an authorization request is received, the SASL
-.B USERNAME, REALM,
-and
-.B MECHANISM
-are taken, when available, and combined into a SASL name of the
-form
-.RS
-.RS
-.TP
-.B uid=<username>[,cn=<realm>],cn=<mechanism>,cn=auth
-
-.RE
-This SASL name is then compared against the
-.B match
-regular expression, and if the match is successful, the SASL name is
-replaced with the
-.B replace
-string. If there are wildcard strings in the
-.B match
-regular expression that are enclosed in parenthesis, e.g.
-.RS
-.RS
-.TP
-.B uid=(.*),cn=.*
-
-.RE
-.RE
-then the portion of the SASL name that matched the wildcard will be stored
-in the numbered placeholder variable $1. If there are other wildcard strings
-in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
-placeholders can then be used in the
-.B replace
-string, e.g.
-.RS
-.RS
-.TP
-.B cn=$1,ou=Accounts,dc=$2,dc=$4.
-
-.RE
-.RE
-The replaced SASL name can be either a DN or an LDAP URI. If the latter, the slapd
-server will use the URI to search its own database, and if the search returns
-exactly one entry, the SASL name is replaced by the DN of that entry.
-Multiple
-.B sasl-regexp
-options can be given in the configuration file to allow for multiple matching
-and replacement patterns. The matching patterns are checked in the order they
-appear in the file, stopping at the first successful match.
-
-.\".B Caution:
-.\"Because the plus sign + is a character recognized by the regular expression engine,
-.\"and it will appear in SASL names that include a REALM, be careful to escape the
-.\"plus sign with a backslash \\+ to remove the character's special meaning.
-.RE
-.TP
.B sasl-secprops <properties>
Used to specify Cyrus SASL security properties.
The
.B none
-flag (without any other properities) causes the flag properites
+flag (without any other properties) causes the flag properties
default, "noanonymous,noplain", to be cleared.
The
.B noplain
controls the entries on this server. The default is "cn=Subschema".
.TP
.B security <factors>
-Specify a set of factors (separated by white space) to require.
-An integer value is associated with each factor and is roughly
-equivalent of the encryption key length to require. A value
-of 112 is equivalent to 3DES, 128 to Blowfish, etc..
+Specify a set of security strength factors (separated by white space)
+to require (see
+.BR sasl-secprops 's
+.B minssf
+option for a description of security strength factors).
The directive may be specified globally and/or per-database.
.B ssf=<n>
specifies the overall security strength factor.
Specify the maximum number of entries to return from a search operation.
The default size limit is 500.
Use
-.B -1
-or
.B unlimited
to specify no limits.
The second format allows a fine grain setting of the size limits.
Specify the maximum incoming LDAP PDU size for authenticated sessions.
The default is 4194303.
.TP
-.B srvtab <filename>
-Specify the srvtab file in which the kerberos keys necessary for
-authenticating clients using kerberos can be found. This option is only
-meaningful if you are using Kerberos authentication.
-.TP
.B threads <integer>
Specify the maximum size of the primary thread pool.
The default is 16.
.B slapd
will spend answering a search request. The default time limit is 3600.
Use
-.B -1
-or
.B unlimited
to specify no limits.
The second format allows a fine grain setting of the time limits.
.TP
.B ucdata-path <path>
Specify the path to the directory containing the Unicode character
-tables. The default path is LOCALSTATEDIR/ucdata.
+tables. The default path is DATADIR/ucdata.
.SH TLS OPTIONS
If
.B slapd
.B TLSVerifyClient
setting must be chosen to enable SASL EXTERNAL authentication.
.RE
+.TP
+.B TLSCRLCheck <level>
+Specifies if the Certificate Revocation List (CRL) of the CA should be
+used to verify if the client certificates have not been revoked. This
+requires
+.B TLSCACertificatePath
+parameter to be set.
+.B <level>
+can be specified as one of the following keywords:
+.RS
+.TP
+.B none
+No CRL checks are performed
+.TP
+.B peer
+Check the CRL of the peer certificate
+.TP
+.B all
+Check the CRL for a whole certificate chain
+.RE
.SH GENERAL BACKEND OPTIONS
Options in this section only apply to the configuration file section
for the specified backend. They are supported by every
.B backend <databasetype>
Mark the beginning of a backend definition. <databasetype>
should be one of
-.B bdb,
-.B dnssrv,
-.B ldap,
-.B ldbm,
-.B meta,
-.B monitor,
-.B null,
-.B passwd,
-.B perl,
-.B shell,
-.B sql,
+.BR bdb ,
+.BR config ,
+.BR dnssrv ,
+.BR hdb ,
+.BR ldap ,
+.BR ldbm ,
+.BR ldif ,
+.BR meta ,
+.BR monitor ,
+.BR null ,
+.BR passwd ,
+.BR perl ,
+.BR relay ,
+.BR shell ,
or
-.B tcl,
+.BR sql ,
depending on which backend will serve the database.
.SH GENERAL DATABASE OPTIONS
.B database <databasetype>
Mark the beginning of a new database instance definition. <databasetype>
should be one of
-.B bdb,
-.B dnssrv,
-.B ldap,
-.B ldbm,
-.B meta,
-.B monitor,
-.B null,
-.B passwd,
-.B perl,
-.B shell,
-.B sql,
+.BR bdb ,
+.BR config ,
+.BR dnssrv ,
+.BR hdb ,
+.BR ldap ,
+.BR ldbm ,
+.BR ldif ,
+.BR meta ,
+.BR monitor ,
+.BR null ,
+.BR passwd ,
+.BR perl ,
+.BR relay ,
+.BR shell ,
or
-.B tcl,
+.BR sql ,
depending on which backend will serve the database.
.TP
.B lastmod on | off
modifiersName, modifyTimestamp, creatorsName, and
createTimestamp attributes for entries. By default, lastmod is on.
.TP
+.B limits <who> <limit> [<limit> [...]]
+Specify time and size limits based on who initiated an operation.
+The argument
+.B who
+can be any of
+.RS
+.RS
+.TP
+anonymous | users | [dn[.<style>]=]<pattern> | group[/oc[/at]]=<pattern>
+
+.RE
+with
+.RS
+.TP
+<style> ::= exact | base | onelevel | subtree | children | regex | anonymous
+
+.RE
+The term
+.B anonymous
+matches all unauthenticated clients.
+The term
+.B users
+matches all authenticated clients;
+otherwise an
+.B exact
+dn pattern is assumed unless otherwise specified by qualifying
+the (optional) key string
+.B dn
+with
+.B exact
+or
+.B base
+(which are synonyms), to require an exact match; with
+.BR onelevel ,
+to require exactly one level of depth match; with
+.BR subtree ,
+to allow any level of depth match, including the exact match; with
+.BR children ,
+to allow any level of depth match, not including the exact match;
+.BR regex
+explicitly requires the (default) match based on POSIX (''extended'')
+regular expression pattern.
+Finally,
+.B anonymous
+matches unbound operations; the
+.B pattern
+field is ignored.
+The same behavior is obtained by using the
+.B anonymous
+form of the
+.B who
+clause.
+The term
+.BR group ,
+with the optional objectClass
+.B oc
+and attributeType
+.B at
+fields, followed by
+.BR pattern ,
+sets the limits for any DN listed in the values of the
+.B at
+attribute (default
+.BR member )
+of the
+.B oc
+group objectClass (default
+.BR groupOfNames )
+whose DN exactly matches
+.BR pattern .
+
+The currently supported limits are
+.B size
+and
+.BR time .
+
+The syntax for time limits is
+.BR time[.{soft|hard}]=<integer> ,
+where
+.I integer
+is the number of seconds slapd will spend answering a search request.
+If no time limit is explicitly requested by the client, the
+.BR soft
+limit is used; if the requested time limit exceeds the
+.BR hard
+.\"limit, an
+.\".I "Administrative limit exceeded"
+.\"error is returned.
+limit, the value of the limit is used instead.
+If the
+.BR hard
+limit is set to the keyword
+.IR soft ,
+the soft limit is used in either case; if it is set to the keyword
+.IR unlimited ,
+no hard limit is enforced.
+Explicit requests for time limits smaller or equal to the
+.BR hard
+limit are honored.
+If no limit specifier is set, the value is assigned to the
+.BR soft
+limit, and the
+.BR hard
+limit is set to
+.IR soft ,
+to preserve the original behavior.
+
+The syntax for size limits is
+.BR size[.{soft|hard|unchecked}]=<integer> ,
+where
+.I integer
+is the maximum number of entries slapd will return answering a search
+request.
+If no size limit is explicitly requested by the client, the
+.BR soft
+limit is used; if the requested size limit exceeds the
+.BR hard
+.\"limit, an
+.\".I "Administrative limit exceeded"
+.\"error is returned.
+limit, the value of the limit is used instead.
+If the
+.BR hard
+limit is set to the keyword
+.IR soft ,
+the soft limit is used in either case; if it is set to the keyword
+.IR unlimited ,
+no hard limit is enforced.
+Explicit requests for size limits smaller or equal to the
+.BR hard
+limit are honored.
+The
+.BR unchecked
+specifier sets a limit on the number of candidates a search request is allowed
+to examine.
+The rationale behind it is that searches for non-properly indexed
+attributes may result in large sets of candidates, which must be
+examined by
+.BR slapd (8)
+to determine whether they match the search filter or not.
+The
+.B unchecked
+limit provides a means to drop such operations before they are even
+started.
+If the selected candidates exceed the
+.BR unchecked
+limit, the search will abort with
+.IR "Unwilling to perform" .
+If it is set to the keyword
+.IR unlimited ,
+no limit is applied (the default).
+If it is set to
+.IR disable ,
+the search is not even performed; this can be used to disallow searches
+for a specific set of users.
+If no limit specifier is set, the value is assigned to the
+.BR soft
+limit, and the
+.BR hard
+limit is set to
+.IR soft ,
+to preserve the original behavior.
+
+In case of no match, the global limits are used.
+The default values are the same of
+.B sizelimit
+and
+.BR timelimit ;
+no limit is set on
+.BR unchecked .
+
+If
+.B pagedResults
+control is requested, the
+.B hard
+size limit is used by default, because the request of a specific page size
+is considered an explicit request for a limitation on the number
+of entries to be returned.
+However, the size limit applies to the total count of entries returned within
+the search, and not to a single page.
+Additional size limits may be enforced; the syntax is
+.BR size.pr={<integer>|noEstimate|unlimited} ,
+where
+.I integer
+is the max page size if no explicit limit is set; the keyword
+.I noEstimate
+inhibits the server from returning an estimate of the total number
+of entries that might be returned
+(note: the current implementation does not return any estimate).
+The keyword
+.I unlimited
+indicates that no limit is applied to the pagedResults control page size.
+The syntax
+.B size.prtotal={<integer>|unlimited|disabled}
+allows to set a limit on the total number of entries that a pagedResults
+control allows to return.
+By default it is set to the
+.B hard
+limit.
+When set,
+.I integer
+is the max number of entries that the whole search with pagedResults control
+can return.
+Use
+.I unlimited
+to allow unlimited number of entries to be returned, e.g. to allow
+the use of the pagedResults control as a means to circumvent size
+limitations on regular searches; the keyword
+.I disabled
+disables the control, i.e. no paged results can be returned.
+Note that the total number of entries returned when the pagedResults control
+is requested cannot exceed the
+.B hard
+size limit of regular searches unless extended by the
+.B prtotal
+switch.
+.RE
+.TP
.B maxderefdepth <depth>
Specifies the maximum number of aliases to dereference when trying to
-resolve an entry, used to avoid inifinite alias loops. The default is 1.
+resolve an entry, used to avoid infinite alias loops. The default is 1.
+.TP
+.B overlay <overlay-name>
+Add the specified overlay to this database. An overlay is a piece of
+code that intercepts database operations in order to extend or change
+them. Overlays are pushed onto
+a stack over the database, and so they will execute in the reverse
+of the order in which they were configured and the database itself
+will receive control last of all.
.TP
.B readonly on | off
This option puts the database into "read-only" mode. Any attempts to
modify the database will return an "unwilling to perform" error. By
default, readonly is off.
.HP
+.hy 0
.B replica uri=ldap[s]://<hostname>[:port]|host=<hostname>[:port]
.B [starttls=yes|critical]
.B [suffix=<suffix> [...]]
in a directory with limited read/write/execute access as the replication
logs may contain sensitive information.
.TP
+.B restrict <oplist>
+Specify a whitespace separated list of operations that are restricted.
+If defined inside a database specification, restrictions apply only
+to that database, otherwise they are global.
+Operations can be any of
+.BR add ,
+.BR bind ,
+.BR compare ,
+.BR delete ,
+.BR extended[=<OID>] ,
+.BR modify ,
+.BR rename ,
+.BR search ,
+or the special pseudo-operations
+.B read
+and
+.BR write ,
+which respectively summarize read and write operations.
+The use of
+.I restrict write
+is equivalent to
+.I readonly on
+(see above).
+The
+.B extended
+keyword allows to indicate the OID of the specific operation
+to be restricted.
+.TP
.B rootdn <dn>
Specify the distinguished name that is not subject to access control
or administrative limit restrictions for operations on this database.
a namingContext (suffix) of the database, a simple bind password
may also be provided using the
.B rootpw
-directive.
+directive. Note that the rootdn is always needed when using syncrepl.
.TP
.B rootpw <password>
Specify a password (or hash of the password) for the rootdn. The
This option accepts all RFC 2307 userPassword formats known to
the server (see
.B password-hash
-desription) as well as cleartext.
+description) as well as cleartext.
.BR slappasswd (8)
may be used to generate a hash of a password. Cleartext
and \fB{CRYPT}\fP passwords are not recommended. If empty
If the suffix of one database is "inside" that of another, the database
with the inner suffix must come first in the configuration file.
.TP
-.B subordinate
+.B subordinate [advertise]
Specify that the current backend database is a subordinate of another
-backend database. A subordinate database may have only one suffix. This
+backend database. A subordinate database may have only one suffix. This
option may be used to glue multiple databases into a single namingContext.
If the suffix of the current database is within the namingContext of a
superior database, searches against the superior database will be
Behavior of other LDAP operations is unaffected by this setting. In
particular, it is not possible to use moddn to move an entry from
one subordinate to another subordinate within the namingContext.
+
+If the optional \fBadvertise\fP flag is supplied, the naming context of
+this database is advertised in the root DSE. The default is to hide this
+database context, so that only the superior context is visible.
+
+If the slap tools
+.BR slapcat (8),
+.BR slapadd (8),
+or
+.BR slapindex (8)
+are used on the superior database, any glued subordinates that support
+these tools are opened as well.
+
+Databases that are glued together should usually be configured with the
+same indices (assuming they support indexing), even for attributes that
+only exist in some of these databases. In general, all of the glued
+databases should be configured as similarly as possible, since the intent
+is to provide the appearance of a single directory.
+
+Note that the \fIsubordinate\fP functionality is implemented internally
+by the \fIglue\fP overlay and as such its behavior will interact with other
+overlays in use. By default, the glue overlay is automatically configured as
+the last overlay on the superior backend. Its position on the backend
+can be explicitly configured by setting an \fBoverlay glue\fP directive
+at the desired position. This explicit configuration is necessary e.g.
+when using the \fIsyncprov\fP overlay, which needs to follow \fIglue\fP
+in order to work over all of the glued databases. E.g.
+.RS
+.nf
+ database bdb
+ suffix dc=example,dc=com
+ ...
+ overlay glue
+ overlay syncprov
+.fi
+.RE
+.HP
+.hy 0
+.B syncrepl rid=<replica ID>
+.B provider=ldap[s]://<hostname>[:port]
+.B [type=refreshOnly|refreshAndPersist]
+.B [interval=dd:hh:mm:ss]
+.B [retry=[<retry interval> <# of retries>]+]
+.B [searchbase=<base DN>]
+.B [filter=<filter str>]
+.B [scope=sub|one|base]
+.B [attrs=<attr list>]
+.B [attrsonly]
+.B [sizelimit=<limit>]
+.B [timelimit=<limit>]
+.B [schemachecking=on|off]
+.B [starttls=yes|critical]
+.B [bindmethod=simple|sasl]
+.B [binddn=<dn>]
+.B [saslmech=<mech>]
+.B [authcid=<identity>]
+.B [authzid=<identity>]
+.B [credentials=<passwd>]
+.B [realm=<realm>]
+.B [secprops=<properties>]
+.B [logbase=<base DN>]
+.B [logfilter=<filter str>]
+.B [syncdata=default|accesslog|changelog]
+.RS
+Specify the current database as a replica which is kept up-to-date with the
+master content by establishing the current
+.BR slapd (8)
+as a replication consumer site running a
+.B syncrepl
+replication engine.
+The replica content is kept synchronized to the master content using
+the LDAP Content Synchronization protocol. Refer to the
+"OpenLDAP Administrator's Guide" for detailed information on
+setting up a replicated
+.B slapd
+directory service using the
+.B syncrepl
+replication engine.
+.B rid
+identifies the current
+.B syncrepl
+directive within the replication consumer site.
+It is a non-negative integer having no more than three digits.
+.B provider
+specifies the replication provider site containing the master content
+as an LDAP URI. If <port> is not given, the standard LDAP port number
+(389 or 636) is used. The content of the
+.B syncrepl
+replica is defined using a search
+specification as its result set. The consumer
+.B slapd
+will send search requests to the provider
+.B slapd
+according to the search specification. The search specification includes
+.B searchbase, scope, filter, attrs, attrsonly, sizelimit,
+and
+.B timelimit
+parameters as in the normal search specification.
+The search specification for the LDAP Content Synchronization operation
+has the same value syntax and the same default values as in the
+.BR ldapsearch (1)
+client search tool.
+The LDAP Content Synchronization protocol has two operation types.
+In the
+.B refreshOnly
+operation, the next synchronization search operation
+is periodically rescheduled at an interval time (specified by
+.B interval
+parameter; 1 day by default)
+after each synchronization operation finishes.
+In the
+.B refreshAndPersist
+operation, a synchronization search remains persistent in the provider slapd.
+Further updates to the master replica will generate
+.B searchResultEntry
+to the consumer slapd as the search responses to the persistent
+synchronization search.
+If an error occurs during replication, the consumer will attempt to
+reconnect according to the
+.B retry
+parameter which is a list of the <retry interval> and <# of retries> pairs.
+For example, retry="60 10 300 3" lets the consumer retry every 60 seconds
+for the first 10 times and then retry every 300 seconds for the next 3
+times before stop retrying. The `+' in <# of retries> means indefinite
+number of retries until success.
+The schema checking can be enforced at the LDAP Sync
+consumer site by turning on the
+.B schemachecking
+parameter. The default is off.
+The
+.B starttls
+parameter specifies use of the StartTLS extended operation
+to establish a TLS session before Binding to the provider. If the
+.B critical
+argument is supplied, the session will be aborted if the StartTLS request
+fails. Otherwise the syncrepl session continues without TLS.
+A
+.B bindmethod
+of
+.B simple
+requires the options
+.B binddn
+and
+.B credentials
+and should only be used when adequate security services
+(e.g. TLS or IPSEC) are in place.
+A
+.B bindmethod
+of
+.B sasl
+requires the option
+.B saslmech.
+Depending on the mechanism, an authentication identity and/or
+credentials can be specified using
+.B authcid
+and
+.B credentials.
+The
+.B authzid
+parameter may be used to specify an authorization identity.
+Specific security properties (as with the
+.B sasl-secprops
+keyword above) for a SASL bind can be set with the
+.B secprops
+option. A non default SASL realm can be set with the
+.B realm
+option.
+
+Rather than replicating whole entries, the consumer can query logs of
+data modifications. This mode of operation is referred to as \fIdelta
+syncrepl\fP. In addition to the above parameters, the
+.B logbase
+and
+.B logfilter
+parameters must be set appropriately for the log that will be used. The
+.B syncdata
+parameter must be set to either "accesslog" if the log conforms to the
+.BR slapo-accesslog (5)
+log format, or "changelog" if the log conforms
+to the obsolete \fIchangelog\fP format. If the
+.B syncdata
+parameter is omitted or set to "default" then the log parameters are
+ignored.
+.RE
.TP
.B updatedn <dn>
This option is only applicable in a slave
-.B slapd.
+database updated using
+.BR slurpd(8).
It specifies the DN permitted to update (subject to access controls)
the replica (typically, this is the DN
.BR slurpd (8)
-binds to update the replica).
+binds to update the replica). Generally, this DN
+.I should not
+be the same as the
+.B rootdn
+used at the master.
.TP
.B updateref <url>
Specify the referral to pass back when
.BR slapd (8)
is asked to modify a replicated local database.
If specified multiple times, each url is provided.
+
.SH DATABASE-SPECIFIC OPTIONS
Each database may allow specific configuration options; they are
documented separately in the backends' manual pages.
it properly.
It uses the Sleepycat Berkeley DB (BDB) package to store data.
.TP
-.B ldbm
-This is the database backend which is easiest to configure.
-However, it does not offer the data durability features of the BDB
-backend.
-It uses Berkeley DB or GDBM to store data.
+.B config
+This backend is used to manage the configuration of slapd run-time.
.TP
.B dnssrv
This backend is experimental.
It serves up referrals based upon SRV resource records held in the
Domain Name System.
.TP
+.B hdb
+This is a variant of the BDB backend that uses a hierarchical database
+layout which supports subtree renames.
+.TP
.B ldap
This backend acts as a proxy to forward incoming requests to another
LDAP server.
.TP
+.B ldbm
+This is the database backend which is easiest to configure.
+However, it does not offer the data durability features of the BDB
+backend.
+It uses Berkeley DB or GDBM to store data.
+.TP
+.B ldif
+This database uses the filesystem to build the tree structure
+of the database, using plain ascii files to store data.
+Its usage should be limited to very simple databases, where performances
+are not a requirement.
+.TP
.B meta
This backend performs basic LDAP proxying with respect to a set of
-remote LDAP servers.
-It is an enhancement of the ldap backend.
+remote LDAP servers. It is an enhancement of the ldap backend. The
+proxy cache extension of meta backend provides answering of search
+requests from the proxy using results of previously cached requests.
.TP
.B monitor
This backend provides information about the running status of the slapd
interpreter into slapd.
It runs Perl subroutines to implement LDAP operations.
.TP
+.B relay
+This backend is experimental.
+It redirects LDAP operations to another database
+in the same server, based on the naming context of the request.
+Its use requires the
+.B rwm
+overlay (see
+.BR slapo-rwm (5)
+for details) to rewrite the naming context of the request.
+It is is primarily intended to implement virtual views on databases
+that actually store data.
+.TP
.B shell
This backend executes external programs to implement LDAP operations.
-It is is primarily intended to be used in prototypes.
+It is primarily intended to be used in prototypes.
.TP
.B sql
This backend is experimental.
It services LDAP requests from an SQL database.
+.SH OVERLAYS
+The following overlays can be compiled into slapd.
+They are documented in the
+.BR slapo-<overlay> (5)
+manual pages.
.TP
-.B tcl
-This backend is experimental.
-It embeds a
-.BR Tcl (3tcl)
-interpreter into slapd.
-It runs Tcl commands to implement LDAP operations.
+.B accesslog
+Access Logging.
+This overlay can record accesses to a given backend database on another
+database.
+.TP
+.B auditlog
+Audit Logging.
+This overlay records changes on a given backend database to an LDIF log
+file.
+By default it is not built.
+.TP
+.B chain
+Chaining.
+This overlay allows automatic referral chasing when a referral would
+have been returned.
+.TP
+.B denyop
+Deny Operation.
+This overlay allows selected operations to be denied, similar to the
+\fBrestrict\fP option.
+.TP
+.B dyngroup
+Dynamic Group.
+This is a demo overlay which extends the Compare operation to detect
+members of a dynamic group.
+It has no effect on any other operations.
+.TP
+.B dynlist
+Dynamic List.
+This overlay allows expansion of dynamic groups and more.
+.TP
+.B lastmod
+Last Modification.
+This overlay maintains a service entry in the database with the DN,
+modification type, modifiersName and modifyTimestamp of the last write
+operation performed on that database.
+.TP
+.B pcache
+Proxycache.
+This overlay allows caching of LDAP search requests in a local database.
+.TP
+.B ppolicy
+Password Policy.
+This overlay provides a variety of password control mechanisms,
+e.g. password aging, password reuse and duplication control, mandatory
+password resets, etc.
+.TP
+.B refint
+Referential Integrity.
+This overlay can be used with a backend database such as
+.BR slapd-bdb (5)
+to maintain the cohesiveness of a schema which utilizes reference
+attributes.
+.TP
+.B retcode
+Return Code.
+This overlay is useful to test the behavior of clients when
+server-generated erroneous and/or unusual responses occur.
+.TP
+.B rwm
+Rewrite/remap.
+This overlay is experimental.
+It performs basic DN/data rewrite and
+objectClass/attributeType mapping.
+.TP
+.B syncprov
+Syncrepl Provider.
+This overlay implements the provider-side support for
+.B syncrepl
+replication, including persistent search functionality.
+.TP
+.B translucent
+Translucent Proxy.
+This overlay can be used with a backend database such as
+.BR slapd-bdb (5)
+to create a "translucent proxy".
+Content of entries retrieved from a remote LDAP server can be partially
+overridden by the database.
+.TP
+.B unique
+Attribute Uniqueness.
+This overlay can be used with a backend database such as
+.BR slapd-bdb (5)
+to enforce the uniqueness of some or all attributes within a subtree.
.SH EXAMPLES
.LP
Here is a short example of a configuration file:
attributeoptions x-hidden lang-
access to attr=name;x-hidden by * =cs
+# Protect passwords. See \fBslapd.access\fP(5).
+access to attrs=userPassword by * auth
+# Read access to other attributes and entries.
+access to * by * read
+
database bdb
suffix "dc=our-domain,dc=com"
# The database directory MUST exist prior to
default slapd configuration file
.SH SEE ALSO
.BR ldap (3),
-.BR slapd-bdb (5),
-.BR slapd-dnssrv (5),
-.BR slapd-ldap (5),
-.BR slapd-ldbm (5),
-.BR slapd-meta (5),
-.BR slapd-monitor (5),
-.BR slapd-null (5),
-.BR slapd-passwd (5),
-.BR slapd-perl (5),
-.BR slapd-shell (5),
-.BR slapd-sql (5),
-.BR slapd-tcl (5),
-.BR slapd.replog (5),
+.BR slapd\-bdb (5),
+.BR slapd\-dnssrv (5),
+.BR slapd\-hdb (5),
+.BR slapd\-ldap (5),
+.BR slapd\-ldbm (5),
+.BR slapd\-ldif (5),
+.BR slapd\-meta (5),
+.BR slapd\-monitor (5),
+.BR slapd\-null (5),
+.BR slapd\-passwd (5),
+.BR slapd\-perl (5),
+.BR slapd\-relay (5),
+.BR slapd\-shell (5),
+.BR slapd\-sql (5),
.BR slapd.access (5),
-.BR locale (5),
+.BR slapd.plugin (5),
+.BR slapd.replog (5),
.BR slapd (8),
+.BR slapacl (8),
.BR slapadd (8),
+.BR slapauth (8),
.BR slapcat (8),
+.BR slapdn (8),
.BR slapindex (8),
.BR slappasswd (8),
-.BR slurpd (8),
+.BR slaptest (8),
+.BR slurpd (8).
+
+Known overlays are documented in
+.BR slapo\-accesslog (5),
+.BR slapo\-auditlog (5),
+.BR slapo\-chain (5),
+.BR slapo\-dynlist (5),
+.BR slapo\-lastmod (5),
+.BR slapo\-pcache (5),
+.BR slapo\-ppolicy (5),
+.BR slapo\-refint (5),
+.BR slapo\-retcode (5),
+.BR slapo\-rwm (5),
+.BR slapo\-syncprov (5),
+.BR slapo\-translucent (5),
+.BR slapo\-unique (5).
.LP
"OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
.SH ACKNOWLEDGEMENTS
-.B OpenLDAP
+.B OpenLDAP
is developed and maintained by The OpenLDAP Project (http://www.openldap.org/).
-.B OpenLDAP
+.B OpenLDAP
is derived from University of Michigan LDAP 3.3 Release.