.\" $OpenLDAP$
-.\" Copyright 1998-2005 The OpenLDAP Foundation All Rights Reserved.
+.\" Copyright 1998-2008 The OpenLDAP Foundation All Rights Reserved.
.\" Copying restrictions apply. See COPYRIGHT/LICENSE.
.TH SLAPD 8C "RELEASEDATE" "OpenLDAP LDVERSION"
.SH NAME
.B [\-T {acl|add|auth|cat|dn|index|passwd|test}]
.B [\-d debug\-level]
.B [\-f slapd\-config\-file]
+.B [\-F slapd\-config\-directory]
.B [\-h URLs]
.B [\-n service\-name] [\-s syslog\-level] [\-l syslog\-local\-user]
+.B [\-o option[=value]]
.B [\-r directory]
.B [\-u user] [\-g group]
.B [\-c cookie]
Upon startup,
.B slapd
normally forks and disassociates itself from the invoking tty.
-If configured in
-.BR ETCDIR/slapd.conf ,
+If configured in the config file (or config directory),
the
.B slapd
process will print its process ID (see
.B slapd
will not fork and disassociate from the invoking tty.
.LP
-.B Slapd
-can be configured to provide replicated service for a database with
-the help of
-.BR slurpd ,
-the standalone LDAP update replication daemon.
-See
-.BR slurpd (8)
-for details.
-.LP
See the "OpenLDAP Administrator's Guide" for more details on
.BR slapd .
.SH OPTIONS
.B \-6
Listen on IPv6 addresses only.
.TP
-.B \-T {a|c|d|i|p|t}
+.B \-T {a|c|d|i|p|t|acl|auth}
Run in Tool mode. The additional argument selects whether to run as
slapadd, slapcat, slapdn, slapindex, slappasswd, or slaptest
(slapacl and slapauth need the entire "\fIacl\fP" and "\fIauth\fP"
.TP
.BI \-d " debug\-level"
Turn on debugging as defined by
-.I debug\-level.
+.IR debug\-level .
If this option is specified, even with a zero argument,
.B slapd
will not fork or disassociate from the invoking terminal. Some general
operation and status messages are printed for any value of \fIdebug\-level\fP.
\fIdebug\-level\fP is taken as a bit string, with each bit corresponding to a
-different kind of debugging information. See <ldap.h> for details.
+different kind of debugging information. See <ldap_log.h> for details.
+Comma-separated arrays of friendly names can be specified to select
+debugging output of the corresponding debugging information.
+All the names recognized by the \fIloglevel\fP directive
+described in \fBslapd.conf\fP(5) are supported.
+If \fIdebug\-level\fP is \fB?\fP, a list of installed levels is printed,
+and slapd exits.
+
Remember that if you turn on packet logging, packets containing bind passwords
will be output, so if you redirect the log to a logfile, that file should
be read-protected.
at what level debugging statements should be logged to the
.BR syslog (8)
facility.
+The value "syslog\-level" can be set to any value or combination
+allowed by the "-d" switch.
+Slapd logs all messages selected by "syslog\-level"
+at the syslog(3) severity level "DEBUG",
+on the unit specified with "-l".
.TP
.BI \-n " service\-name"
Specifies the service name for logging and other purposes. Defaults
local users with the
.BR syslog (8)
facility.
+Logging to syslog(8) occurs at the "DEBUG" severity level.
.TP
.BI \-f " slapd\-config\-file"
Specifies the slapd configuration file. The default is
.BR ETCDIR/slapd.conf .
.TP
+.BI \-F " slapd\-config\-directory"
+Specifies the slapd configuration directory. The default is
+.BR ETCDIR/slapd.d .
+If both
+.B -f
+and
+.B -F
+are specified, the config file will be read and converted to
+config directory format and written to the specified directory.
+If neither option is specified, slapd will attempt to read the
+default config directory before trying to use the default
+config file. If a valid config directory exists then the
+default config file is ignored. All of the slap tools that
+use the config options observe this same behavior.
+.TP
.BI \-h " URLlist"
.B slapd
will by default serve
options. Hosts may be specified by name or IPv4 and IPv6 address formats.
Ports, if specified, must be numeric. The default ldap:// port is 389
and the default ldaps:// port is 636.
-The socket permissions for LDAP over IPC are indicated by
+
+The listener permissions are indicated by
"x-mod=-rwxrwxrwx", "x-mod=0777" or "x-mod=777", where any
-of the "rwx" can be "-" to suppress the related permission (note,
-however, that sockets only honor the "w" permission), while any
+of the "rwx" can be "-" to suppress the related permission, while any
of the "7" can be any legal octal digit, according to chmod(1).
-While LDAP over IPC requires write permissions on the socket to allow
-any operation, the other listeners can take advantage of the "x-mod"
-extension to apply rough limitations to users, e.g. allow read operations
+The listeners can take advantage of the "x-mod"
+extension to apply rough limitations to operations, e.g. allow read operations
("r", which applies to search and compare), write operations ("w",
which applies to add, delete, modify and modrdn), and execute operations
("x", which means bind is required).
-"User" permissions apply to bound users, while "other" apply
-to anonymous users.
+"User" permissions apply to authenticated users, while "other" apply
+to anonymous users; "group" permissions are ignored.
+For example, "ldap:///????x-mod=-rw-------" means that read and write is only allowed
+for authenticated connections, and bind is required for all operations.
+This feature is experimental, and requires to be manually enabled
+at configure time.
.TP
.BI \-r " directory"
Specifies a directory to become the root directory. slapd will
is the commit sequence number received by a previous synchronization
and represents the state of the consumer replica content which the
syncrepl engine will synchronize to the current provider content.
+.TP
+.BI \-o " option[=value]"
+This option provides a generic means to specify options without the need to reserve
+a separate letter for them.
+
+It supports the following options:
+.RS
+.TP
+slp={\fBon\fP|\fBoff\fP|\fIslp\-attrs\fP}
+When SLP support is compiled into slapd, disable it (
+.B off
+), enable it by registering at SLP DAs without specific SLP attributes (
+.B on
+), or with specific SLP attributes
+.I slp\-attrs
+that must be an SLP attribute list definition according to the SLP standard.
+
+For example, "-o slp=(tree=production),(server-type=OpenLDAP),(server-version=2.3.20)"
+registers at SLP DAs with the three SLP attributes tree, server-type and server-version
+that have the values given above.
+This allows to specifically query the SLP DAs for LDAP servers holding the
+.I production
+tree in case multiple trees are available.
+.RE
.SH EXAMPLES
To start
.I slapd
.BR slapdn (8),
.BR slapindex (8),
.BR slappasswd (8),
-.BR slaptest (8),
-.BR slurpd (8)
+.BR slaptest (8).
.LP
"OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
.SH BUGS
See http://www.openldap.org/its/
.SH ACKNOWLEDGEMENTS
-.B OpenLDAP
-is developed and maintained by The OpenLDAP Project (http://www.openldap.org/).
-.B OpenLDAP
-is derived from University of Michigan LDAP 3.3 Release.
+.so ../Project
projects / openldap / blobdiff