IPC interface (interprocess communication)
==========================================
-Michael Stapelberg <michael+i3@stapelberg.de>
-March 2010
+Michael Stapelberg <michael@i3wm.org>
+August 2012
This document describes how to interface with i3 from a separate process. This
is useful for example to remote-control i3 (to write test cases for example) or
The method of choice for IPC in our case is a unix socket because it has very
little overhead on both sides and is usually available without headaches in
most languages. In the default configuration file, the ipc-socket gets created
-in +/tmp/i3-%u/ipc-socket.%p+ where +%u+ is your UNIX username and +%p+ is the
-PID of i3.
+in +/tmp/i3-%u.XXXXXX/ipc-socket.%p+ where +%u+ is your UNIX username, +%p+ is
+the PID of i3 and XXXXXX is a string of random characters from the portable
+filename character set (see mkdtemp(3)). You can get the socketpath from i3 by
+calling +i3 --get-socketpath+.
All i3 utilities, like +i3-msg+ and +i3-input+ will read the +I3_SOCKET_PATH+
X11 property, stored on the X11 root window.
-------------------------------------------------------------
use IO::Socket::UNIX;
-my $sock = IO::Socket::UNIX->new(Peer => '/tmp/i3-ipc.sock');
+chomp(my $path = qx(i3 --get-socketpath));
+my $sock = IO::Socket::UNIX->new(Peer => $path);
-------------------------------------------------------------
== Sending messages to i3
COMMAND (0)::
The payload of the message is a command for i3 (like the commands you
can bind to keys in the configuration file) and will be executed
- directly after receiving it. There is no reply to this message.
+ directly after receiving it.
GET_WORKSPACES (1)::
Gets the current workspaces. The reply will be a JSON-encoded list of
workspaces (see the reply section).
Gets a list of marks (identifiers for containers to easily jump to them
later). The reply will be a JSON-encoded list of window marks (see
reply section).
+GET_BAR_CONFIG (6)::
+ Gets the configuration (as JSON map) of the workspace bar with the
+ given ID. If no ID is provided, an array with all configured bar IDs is
+ returned instead.
+GET_VERSION (7)::
+ Gets the version of i3. The reply will be a JSON-encoded dictionary
+ with the major, minor, patch and human-readable version.
So, a typical message could look like this:
--------------------------------------------------
COMMAND (0)::
Confirmation/Error code for the COMMAND message.
-GET_WORKSPACES (1)::
+WORKSPACES (1)::
Reply to the GET_WORKSPACES message.
SUBSCRIBE (2)::
Confirmation/Error code for the SUBSCRIBE message.
-GET_OUTPUTS (3)::
+OUTPUTS (3)::
Reply to the GET_OUTPUTS message.
-GET_TREE (4)::
+TREE (4)::
Reply to the GET_TREE message.
-GET_MARKS (5)::
+MARKS (5)::
Reply to the GET_MARKS message.
+BAR_CONFIG (6)::
+ Reply to the GET_BAR_CONFIG message.
+VERSION (7)::
+ Reply to the GET_VERSION message.
=== COMMAND reply
{ "success": true }
-------------------
-=== GET_WORKSPACES reply
+=== WORKSPACES reply
The reply consists of a serialized list of workspaces. Each workspace has the
following properties:
{ "success": true }
-------------------
-=== GET_OUTPUTS reply
+=== OUTPUTS reply
The reply consists of a serialized list of outputs. Each output has the
following properties:
]
-------------------
-=== GET_TREE reply
+=== TREE reply
The reply consists of a serialized tree. Each node in the tree (representing
one container) has at least the properties listed below. While the nodes might
Can be either "normal", "none" or "1pixel", dependending on the
container’s border style.
layout (string)::
- Can be either "default", "stacked", "tabbed", "dockarea" or "output".
+ Can be either "splith", "splitv", "stacked", "tabbed", "dockarea" or
+ "output".
Other values might be possible in the future, should we add new
layouts.
orientation (string)::
Can be either "none" (for non-split containers), "horizontal" or
"vertical".
+ THIS FIELD IS OBSOLETE. It is still present, but your code should not
+ use it. Instead, rely on the layout field.
percent (float)::
The percentage which this container takes in its parent. A value of
+null+ means that the percent property does not make sense for this
geometry (map)::
The original geometry the window specified when i3 mapped it. Used when
switching a window to floating mode, for example.
+window (integer)::
+ The X11 window ID of the *actual client window* inside this container.
+ This field is set to null for split containers or otherwise empty
+ containers. This ID corresponds to what xwininfo(1) and other
+ X11-related tools display (usually in hex).
urgent (bool)::
Whether this container (window or workspace) has the urgency hint set.
focused (bool)::
}
]
}
+------------------------
-
-=== GET_MARKS reply
+=== MARKS reply
The reply consists of a single array of strings for each container that has a
mark. The order of that array is undefined. If more than one container has the
contents are not unique).
If no window has a mark the response will be the empty array [].
-------------------------
+=== BAR_CONFIG reply
+
+This can be used by third-party workspace bars (especially i3bar, but others
+are free to implement compatible alternatives) to get the +bar+ block
+configuration from i3.
+
+Depending on the input, the reply is either:
+
+empty input::
+ An array of configured bar IDs
+Bar ID::
+ A JSON map containing the configuration for the specified bar.
+
+Each bar configuration has the following properties:
+
+id (string)::
+ The ID for this bar. Included in case you request multiple
+ configurations and want to differentiate the different replies.
+mode (string)::
+ Either +dock+ (the bar sets the dock window type) or +hide+ (the bar
+ does not show unless a specific key is pressed).
+position (string)::
+ Either +bottom+ or +top+ at the moment.
+status_command (string)::
+ Command which will be run to generate a statusline. Each line on stdout
+ of this command will be displayed in the bar. At the moment, no
+ formatting is supported.
+font (string)::
+ The font to use for text on the bar.
+workspace_buttons (boolean)::
+ Display workspace buttons or not? Defaults to true.
+verbose (boolean)::
+ Should the bar enable verbose output for debugging? Defaults to false.
+colors (map)::
+ Contains key/value pairs of colors. Each value is a color code in hex,
+ formatted #rrggbb (like in HTML).
+
+The following colors can be configured at the moment:
+
+background::
+ Background color of the bar.
+statusline::
+ Text color to be used for the statusline.
+focused_workspace_text/focused_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ has focus.
+active_workspace_text/active_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ is active (visible) on some output, but the focus is on another one.
+ You can only tell this apart from the focused workspace when you are
+ using multiple monitors.
+inactive_workspace_text/inactive_workspace_bg::
+ Text color/background color for a workspace button when the workspace
+ does not have focus and is not active (visible) on any output. This
+ will be the case for most workspaces.
+urgent_workspace_text/urgent_workspace_bar::
+ Text color/background color for workspaces which contain at least one
+ window with the urgency hint set.
+
+
+*Example of configured bars:*
+--------------
+["bar-bxuqzf"]
+--------------
+
+*Example of bar configuration:*
+--------------
+{
+ "id": "bar-bxuqzf",
+ "mode": "dock",
+ "position": "bottom",
+ "status_command": "i3status",
+ "font": "-misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1",
+ "workspace_buttons": true,
+ "verbose": false,
+ "colors": {
+ "background": "#c0c0c0",
+ "statusline": "#00ff00",
+ "focused_workspace_text": "#ffffff",
+ "focused_workspace_bg": "#000000"
+ }
+}
+--------------
+
+=== VERSION reply
+
+The reply consists of a single JSON dictionary with the following keys:
+
+major (integer)::
+ The major version of i3, such as +4+.
+minor (integer)::
+ The minor version of i3, such as +2+. Changes in the IPC interface (new
+ features) will only occur with new minor (or major) releases. However,
+ bugfixes might be introduced in patch releases, too.
+patch (integer)::
+ The patch version of i3, such as +1+ (when the complete version is
+ +4.2.1+). For versions such as +4.2+, patch will be set to +0+.
+human_readable (string)::
+ A human-readable version of i3 containing the precise git version,
+ build date and branch name. When you need to display the i3 version to
+ your users, use the human-readable version whenever possible (since
+ this is what +i3 --version+ displays, too).
+
+*Example:*
+-------------------
+{
+ "human_readable" : "4.2-169-gf80b877 (2012-08-05, branch \"next\")",
+ "minor" : 2,
+ "patch" : 0,
+ "major" : 4
+}
+-------------------
== Events
output (1)::
Sent when RandR issues a change notification (of either screens,
outputs, CRTCs or output properties).
+mode (2)::
+ Sent whenever i3 changes its binding mode.
*Example:*
--------------------------------------------------------------------
{ "change": "unspecified" }
---------------------------
+=== mode event
+
+This event consists of a single serialized map containing a property
++change (string)+ which holds the name of current mode in use. The name
+is the same as specified in config when creating a mode. The default
+mode is simply named default.
+
+*Example:*
+---------------------------
+{ "change": "default" }
+---------------------------
+
== See also
For some languages, libraries are available (so you don’t have to implement
Ruby::
http://github.com/badboy/i3-ipc
Perl::
- http://search.cpan.org/search?query=AnyEvent::I3
+ https://metacpan.org/module/AnyEvent::I3
Python::
- http://github.com/thepub/i3ipc
+ * https://github.com/whitelynx/i3ipc
+ * https://github.com/ziberna/i3-py (includes higher-level features)