you moved down is directly attached to the workspace and appears on the bottom
of the screen. A new (horizontal) container was created to accommodate the
other two terminal windows. You will notice this when switching to tabbed mode
-(for example). You would end up having one tab called "another container" and
-the other one being the terminal window you moved down.
+(for example). You would end up having one tab with a representation of the split
+container (e.g., "H[urxvt firefox]") and the other one being the terminal window
+you moved down.
[[configuring]]
== Configuring i3
*Syntax*:
----------------------------------
-bindsym [--release] [--whole-window] [Modifiers+]button[n] command
+bindsym [--release] [--border] [--whole-window] [Modifiers+]button[n] command
----------------------------------
By default, the binding will only run when you click on the titlebar of the
-window. If the +--whole-window+ flag is given, it will run when any part of the
-window is clicked. If the +--release+ flag is given, it will run when the mouse
-button is released.
+window. If the +--release+ flag is given, it will run when the mouse button
+is released.
+
+If the +--whole-window+ flag is given, the binding will also run when any part
+of the window is clicked, with the exception of the border. To have a bind run
+when the border is clicked, specify the +--border+ flag.
*Examples*:
--------------------------------
The valid criteria are the same as those for commands, see <<command_criteria>>.
+=== Don't focus window upon opening
+
+[[no_focus]]
+
+When a new window appears, it will be focused. The +no_focus+ directive allows preventing
+this from happening and can be used in combination with <<command_criteria>>.
+
+Note that this does not apply to all cases, e.g., when feeding data into a running application
+causing it to request being focused. To configure the behavior in such cases, refer to
+<<focus_on_window_activation>>.
+
+*Syntax*:
+-------------------
+no_focus <criteria>
+-------------------
+
+*Example*:
+-------------------------------
+no_focus [window_role="pop-up"]
+-------------------------------
+
=== Variables
As you learned in the section about keyboard bindings, you will have
also when restarting i3 you should use the +exec_always+
keyword. These commands will be run in order.
+See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
+and +,+ (comma): they chain commands together in i3, so you need to use quoted
+strings if they appear in your command.
+
*Syntax*:
-------------------
exec [--no-startup-id] command
force_display_urgency_hint 500 ms
---------------------------------
+=== Delaying exiting on zero displays
+
+Outputs may disappear momentarily and come back later. For example,
+using a docking station that does not announce the undock (e.g. ACPI Undock
+event triggered through manually pushing a button before actually ejecting
+the notebook). During the removal of the notebook from the docking station,
+all outputs disappear momentarily.
+
+To prevent i3 from exiting when no output is available momentarily, you can
+tell i3 to delay a certain time first and check available outputs again using
+the +delay_exit_on_zero_displays+ directive. Setting the value to 0 disables
+this feature.
+
+The default is 500ms.
+
+*Syntax*:
+----------------------------------------
+delay_exit_on_zero_displays <timeout> ms
+----------------------------------------
+
+*Example*:
+----------------------------------
+delay_exit_on_zero_displays 500 ms
+----------------------------------
+
+=== Focus on window activation
+
+[[focus_on_window_activation]]
+
+If a window is activated, e.g., via +google-chrome www.google.com+, it may request
+to take focus. Since this may not preferable, different reactions can be configured.
+
+Note that this may not affect windows that are being opened. To prevent new windows
+from being focused, see <<no_focus>>.
+
+*Syntax*:
+----------------------------------------------------
+focus_on_window_activation <smart|urgent|focus|none>
+----------------------------------------------------
+
+The different modes will act as follows:
+
+smart::
+ This is the default behavior. If the window requesting focus is on an active
+ workspace, it will receive the focus. Otherwise, the urgency hint will be set.
+urgent::
+ The window will always be marked urgent, but the focus will not be stolen.
+focus::
+ The window will always be focused and not be marked urgent.
+none::
+ The window will neither be focused, nor be marked urgent.
+
+=== Drawing marks on window decoration
+
+If activated, marks on windows are drawn in their window decoration. However,
+any mark starting with an underscore in its name (+_+) will not be drawn even if
+this option is activated.
+
+The default for this option is +yes+.
+
+*Syntax*:
+-------------------
+show_marks [yes|no]
+-------------------
+
+*Example*:
+--------------
+show_marks yes
+--------------
+
== Configuring i3bar
The bar at the bottom of your monitor is drawn by a separate process called
}
--------------------------------------------------------------
+=== Custom separator symbol
+
+Specifies a custom symbol to be used for the separator as opposed to the vertical,
+one pixel thick separator.
+
+*Syntax*:
+-------------------------
+separator_symbol <symbol>
+-------------------------
+
+*Example*:
+------------------------
+bar {
+ separator_symbol ":|:"
+}
+------------------------
+
=== Workspace buttons
Specifies whether workspace buttons should be shown or not. This is useful if
i3-msg border none
--------------------------
+[[command_chaining]]
+
Commands can be chained by using +;+ (a semicolon). So, to move a window to a
specific workspace and immediately switch to that workspace, you can configure
the following keybinding:
Compares the window instance (the first part of WM_CLASS)
window_role::
Compares the window role (WM_WINDOW_ROLE).
+window_type::
+ Compare the window type (_NET_WM_WINDOW_TYPE). Possible values are
+ +normal+, +dialog+, +utility+, +toolbar+, +splash+, +menu+, +dropdown_menu+,
+ +popup_menu+ and +toolti+.
id::
Compares the X11 window ID, which you can get via +xwininfo+ for example.
title::
What good is a window manager if you can’t actually start any applications?
The exec command starts an application by passing the command you specify to a
shell. This implies that you can use globbing (wildcards) and programs will be
-searched in your $PATH.
+searched in your +$PATH+.
+
+See <<command_chaining>> for details on the special meaning of +;+ (semicolon)
+and +,+ (comma): they chain commands together in i3, so you need to use quoted
+strings if they appear in your command.
*Syntax*:
------------------------------
bindsym $mod+x move container to output VGA1
--------------------------------------------------------
+=== Moving containers/workspaces to marks
+
+To move a container to another container with a specific mark (see <<vim_like_marks>>),
+you can use the following command.
+
+The window will be moved right after the marked container in the tree, i.e., it ends up
+in the same position as if you had opened a new window when the marked container was
+focused. If the mark is on a split container, the window will appear as a new child
+after the currently focused child within that container.
+
+*Syntax*:
+------------------------------------
+move window|container to mark <mark>
+------------------------------------
+
+*Example*:
+--------------------------------------------------------
+for_window [instance="tabme"] move window to mark target
+--------------------------------------------------------
+
[[resizingconfig]]
=== Resizing containers/windows
for this purpose: It lets you input a command and sends the command to i3. It
can also prefix this command and display a custom prompt for the input dialog.
+The additional +--toggle+ option will remove the mark if the window already has
+this mark, add it if the window has none or replace the current mark if it has
+another mark.
+
+Refer to +show_marks+ if you don't want marks to be shown in the window decoration.
+
*Syntax*:
------------------------------
-mark identifier
+mark [--toggle] identifier
[con_mark="identifier"] focus
unmark identifier
------------------------------
projects / i3 / i3 / blobdiff