press +$mod+f+.
There is also a global fullscreen mode in i3 in which the client will span all
-available outputs (the command is +fullscreen global+).
+available outputs (the command is +fullscreen toggle global+).
=== Opening other applications
*Examples*:
--------------------------------
# Fullscreen
-bindsym $mod+f fullscreen
+bindsym $mod+f fullscreen toggle
# Restart
bindsym $mod+Shift+r restart
bindings. For example, when typing, capslock+1 or capslock+2 for switching
workspaces is totally convenient. Try it :-).
+[[mousebindings]]
+
+=== Mouse bindings
+
+A mouse binding makes i3 execute a command upon pressing a specific mouse
+button in the scope of the clicked container (see <<command_criteria>>). You
+can configure mouse bindings in a similar way to key bindings.
+
+*Syntax*:
+----------------------------------
+bindsym [--release] [--whole-window] [Modifiers+]button[n] command
+----------------------------------
+
+By default, the binding will only run when you click on the titlebar of the
+window. If the +--whole-window+ flag is given, it will run when any part of the
+window is clicked. If the +--release+ flag is given, it will run when the mouse
+button is released.
+
+*Examples*:
+--------------------------------
+# The middle button over a titlebar kills the window
+bindsym --release button2 kill
+
+# The middle button and a modifer over any part of the window kills the window
+bindsym --whole-window $mod+button2 kill
+
+# The right button toggles floating
+bindsym button3 floating toggle
+bindsym $mod+button3 floating toggle
+
+# The side buttons move the window around
+bindsym button9 move left
+bindsym button8 move right
+--------------------------------
+
[[floating_modifier]]
=== The floating modifier
force_display_urgency_hint 500 ms
---------------------------------
+=== Focus on window activation
+
+If a window is activated, e.g., via +google-chrome www.google.com+, it may request
+to take focus. Since this may not preferable, different reactions can be configured.
+
+Note that this does not apply to any window that is opened, i.e., typically opening
+an application will focus that window independent of this configuration.
+
+*Syntax*:
+----------------------------------------------------
+focus_on_window_activation <smart|urgent|focus|none>
+----------------------------------------------------
+
+The different modes will act as follows:
+
+smart::
+ This is the default behavior. If the window requesting focus is on an active
+ workspace, it will receive the focus. Otherwise, the urgency hint will be set.
+urgent::
+ The window will always be marked urgent, but the focus will not be stolen.
+focus::
+ The window will always be focused and not be marked urgent.
+none::
+ The window will neither be focused, nor be marked urgent.
+
+=== Drawing marks on window decoration
+
+If activated, marks on windows are drawn in their window decoration. However,
+any mark starting with an underscore in its name (+_+) will not be drawn even if
+this option is activated.
+
+The default for this option is +no+.
+
+*Syntax*:
+-------------------
+show_marks [yes|no]
+-------------------
+
+*Example*:
+--------------
+show_marks yes
+--------------
+
== Configuring i3bar
The bar at the bottom of your monitor is drawn by a separate process called
Available modifiers are Mod1-Mod5, Shift, Control (see +xmodmap(1)+).
+=== Mouse button commands
+
+Specifies a command to run when a button was pressed on i3bar to override the
+default behavior. Currently only the mouse wheel buttons are supported. This is
+useful for disabling the scroll wheel action or running scripts that implement
+custom behavior for these buttons.
+
+*Syntax*:
+---------------------
+wheel_up_cmd <command>
+wheel_down_cmd <command>
+---------------------
+
+*Example*:
+---------------------
+bar {
+ wheel_up_cmd nop
+ wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
+}
+---------------------
+
=== Bar ID
Specifies the bar ID for the configured bar instance. If this option is missing,
}
--------------------------------------------------------------
+=== Custom separator symbol
+
+Specifies a custom symbol to be used for the separator as opposed to the vertical,
+one pixel thick separator. Note that you may have to adjust the +sep_block_width+
+property.
+
+*Syntax*:
+-------------------------
+separator_symbol <symbol>
+-------------------------
+
+*Example*:
+------------------------
+bar {
+ separator_symbol ":|:"
+}
+------------------------
+
=== Workspace buttons
Specifies whether workspace buttons should be shown or not. This is useful if
or +layout splith+ to change the current container layout to splith/splitv,
stacking, tabbed layout, splitv or splith, respectively.
-To make the current window (!) fullscreen, use +fullscreen+, to make
-it floating (or tiling again) use +floating enable+ respectively +floating disable+
-(or +floating toggle+):
+To make the current window (!) fullscreen, use +fullscreen enable+ (or
++fullscreen enable global+ for the global mode), to leave either fullscreen
+mode use +fullscreen disable+, and to toggle between these two states use
++fullscreen toggle+ (or +fullscreen toggle global+).
+
+Likewise, to make the current window floating (or tiling again) use +floating
+enable+ respectively +floating disable+ (or +floating toggle+):
*Syntax*:
--------------
bindsym $mod+x layout toggle all
# Toggle fullscreen
-bindsym $mod+f fullscreen
+bindsym $mod+f fullscreen toggle
# Toggle floating/tiling
bindsym $mod+t floating toggle
See <<move_to_outputs>> for how to move a container/workspace to a different
RandR output.
+Workspace names are parsed as
+https://developer.gnome.org/pango/stable/PangoMarkupFormat.html[Pango markup]
+by i3bar.
+
[[back_and_forth]]
To switch back to the previously focused workspace, use +workspace
back_and_forth+; likewise, you can move containers to the previously focused
-------------------------
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3:<span foreground="red">vim</span>
...
bindsym $mod+Shift+1 move container to workspace 1
for this purpose: It lets you input a command and sends the command to i3. It
can also prefix this command and display a custom prompt for the input dialog.
+The additional +--toggle+ option will remove the mark if the window already has
+this mark, add it if the window has none or replace the current mark if it has
+another mark.
+
+Refer to +show_marks+ if you want marks to be shown in the window decoration.
+
*Syntax*:
------------------------------
-mark identifier
+mark [--toggle] identifier
[con_mark="identifier"] focus
unmark identifier
------------------------------
bindsym mod4+s [title="^Sup ::"] scratchpad show
------------------------------------------------
+=== Nop
+
+There is a no operation command +nop+ which allows you to override default
+behavior. This can be useful for, e.g., disabling a focus change on clicks with
+the middle mouse button.
+
+The optional +comment+ argument is ignored, but will be printed to the log file
+for debugging purposes.
+
+*Syntax*:
+---------------
+nop [<comment>]
+---------------
+
+*Example*:
+----------------------------------------------
+# Disable focus change for clicks on titlebars
+# with the middle mouse button
+bindsym button2 nop
+----------------------------------------------
+
=== i3bar control
There are two options in the configuration of each i3bar instance that can be
projects / i3 / i3 / blobdiff