/*
- * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
+ * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Author: Tor Krill <tor@excito.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*
* This is a driver for Silicon Image sil3114 sata chip modelled on
* the ata_piix driver
#include <asm/byteorder.h>
#include <asm/io.h>
#include <ide.h>
+#include <sata.h>
#include <libata.h>
#include "sata_sil3114.h"
static void msleep (int count);
static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
{
}
if (status & ATA_BUSY) {
- printf ("ata%u is slow to respond,plz be patient\n", port);
+ printf ("ata%u is slow to respond,plz be patient\n", num);
}
while ((status & ATA_BUSY)) {
}
if (status & ATA_BUSY) {
- printf ("ata%u failed to respond : ", port);
+ printf ("ata%u failed to respond : ", num);
printf ("bus reset failed\n");
port[num].dev_mask = 0;
return 1;
sata_dev_desc[devno].removable = 0;
sata_dev_desc[devno].lba = (u32) n_sectors;
- debug ("lba=0x%x\n", sata_dev_desc[devno].lba);
+ debug("lba=0x%lx\n", sata_dev_desc[devno].lba);
#ifdef CONFIG_LBA48
if (iobuf[83] & (1 << 10)) {
(iobase[5] + VND_TF2_CH0) | ATA_PCI_CTL_OFS;
port[0].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH0;
break;
+#if (CONFIG_SYS_SATA_MAX_DEVICE >= 1)
case 1:
port[1].port_no = 0;
port[1].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH1;
(iobase[5] + VND_TF2_CH1) | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH1;
break;
+#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 2)
case 2:
port[2].port_no = 0;
port[2].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH2;
(iobase[5] + VND_TF2_CH2) | ATA_PCI_CTL_OFS;
port[2].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH2;
break;
+#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 3)
case 3:
port[3].port_no = 0;
port[3].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH3;
(iobase[5] + VND_TF2_CH3) | ATA_PCI_CTL_OFS;
port[3].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH3;
break;
+#endif
default:
printf ("Tried to scan unknown port: ata%d\n", dev);
return 1;